Skip to contentSkip to conversation

package/gpsd: make the package more modular

PATCH In review [email protected] 4 participants 11 messages Jul 9, 2024 – Sep 3, 2024

lore
Share & tools
lore
#0 lore raw

cover package/gpsd: make the package more modular

From: "Yann E. MORIN" <[email protected]>

Hello All!

There are use-cases where a gpsd daemon is not needed, and just the "native" tools and the python helpers are used. There are also cases where tonly the python scripts are needed (e.g. one is useful to configure the u-blox devices).

This series makes the package a little bit more modular to cover those cases.

Regards,
Yann E. MORIN.

The following changes since commit 3ebc7c69d56430c34eba4c869d1d4fe4d1e8de55

support/testing: new rt-tests runtime test (2024-07-03 23:50:24 +0200)

are available as patches in this mail series,

for you to apply patches up to e6e9df5fad92d96444cebc9ebc8c137b83f929a6

package/gpsd: add option to enable/disable the daemon (2024-07-09 16:23:08 +0200)

----------------------------------------------------------------
Yann E. MORIN (5):
package/gpsd: condition python stuff to the proper kconfig option package/gpsd: fix comment about wchar requirement package/gpsd: move python option later
package/gpsd: add option to enable clients package/gpsd: add option to enable/disable the daemon

 package/gpsd/Config.in | 46 +++++++++++++++++++++++++--------
 package/gpsd/gpsd.mk   | 70 +++++++++++++++++++++++++++++++-------------------
 2 files changed, 78 insertions(+), 38 deletions(-)
Signature · 24 lines
                                        ____________
.-----------------.--------------------:       _    :------------------.
|  Yann E. MORIN  | Real-Time Embedded |    __/ )   | /"\ ASCII RIBBON |
|                 | Software  Designer |  _/ - /'   | \ / CAMPAIGN     |
| +33 638.411.245 '--------------------: (_    `--, |  X  AGAINST      |
| yann.morin (at) orange.com           |_="    ,--' | / \ HTML MAIL    |
'--------------------------------------:______/_____:------------------'

____________________________________________________________________________________________________________
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#4 lore raw

PATCH 2/5 package/gpsd: fix comment about wchar requirement

From: "Yann E. MORIN" <[email protected]>

The comment does not follow the coding style, so update it appropriately.

---
 package/gpsd/Config.in | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/gpsd/Config.in +1 -1
index 8c28c05efd..44615f4e43 100644
@@ -84,7 +84,7 @@ config BR2_PACKAGE_GPSD_PYTHON
 	  Python libraries and tools for the gpsd service daemon
 	  including gpsfake test harness.
 
-comment "GPSD python support not available with toolchain w/o wide characters support"
+comment "python support needs a toolchain w/ wchar"
 	depends on !BR2_USE_WCHAR
 
 comment "Protocols"
Signature · 18 lines
2.34.1

____________________________________________________________________________________________________________
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH 1/5 package/gpsd: condition python stuff to the proper kconfig option

In reply to [email protected]

From: "Yann E. MORIN" <[email protected]>

Currently, we have a Kconfig symbol to enable the python support in gpsd, but the condition at configure time is based on whether the python package is enabled. So, if a user does not enable python support in gpsd, they still get it.

Switch to using the proper symbol.

---
 package/gpsd/gpsd.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/gpsd/gpsd.mk +1 -1
index 1d4013d122..c57fad83c3 100644
@@ -178,7 +178,7 @@ ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y)
 GPSD_SCONS_OPTS += max_devices=$(BR2_PACKAGE_GPSD_MAX_DEV_VALUE)
 endif
 
-ifeq ($(BR2_PACKAGE_PYTHON3),y)
+ifeq ($(BR2_PACKAGE_GPSD_PYTHON),y)
 GPSD_SCONS_OPTS += \
 	python=yes \
 	python_libdir="/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages"
Signature · 18 lines
2.34.1

____________________________________________________________________________________________________________
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#6 lore raw

PATCH 3/5 package/gpsd: move python option later

In reply to [email protected]

From: "Yann E. MORIN" <[email protected]>

It's in the middle of options that are specific to the daemon, while it itslef is not specific to the daemon. We're going to add an option to enable/disable the daemon soon, so that python option would get hidden away.

Move it further down, out of scope of the daemon-related options.

---
 package/gpsd/Config.in | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
package/gpsd/Config.in +11 -11
index 44615f4e43..1b61f8c286 100644
@@ -76,17 +76,6 @@ config BR2_PACKAGE_GPSD_MAX_DEV_VALUE
 config BR2_PACKAGE_GPSD_SQUELCH
 	bool "squelch gpsd_report and gpsd_hexdump to save cpu"
 
-config BR2_PACKAGE_GPSD_PYTHON
-	bool "build Python support and modules"
-	depends on BR2_USE_WCHAR # python3
-	select BR2_PACKAGE_PYTHON3
-	help
-	  Python libraries and tools for the gpsd service daemon
-	  including gpsfake test harness.
-
-comment "python support needs a toolchain w/ wchar"
-	depends on !BR2_USE_WCHAR
-
 comment "Protocols"
 
 config BR2_PACKAGE_GPSD_AIVDM
@@ -221,4 +210,15 @@ config BR2_PACKAGE_GPSD_UBX
 	help
 	  uBlox UBX binary support
 
+config BR2_PACKAGE_GPSD_PYTHON
+	bool "build Python support and modules"
+	depends on BR2_USE_WCHAR # python3
+	select BR2_PACKAGE_PYTHON3
+	help
+	  Python libraries and tools for the gpsd service daemon
+	  including gpsfake test harness.
+
+comment "python support needs a toolchain w/ wchar"
+	depends on !BR2_USE_WCHAR
+
 endif
Signature · 18 lines
2.34.1

____________________________________________________________________________________________________________
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#7 lore raw

PATCH 4/5 package/gpsd: add option to enable clients

In reply to [email protected]

From: "Yann E. MORIN" <[email protected]>

In some cases, the clients are useless on the target, e.g. when there is no need to adjust the gpsd daemon at runtime.

---
 package/gpsd/Config.in | 11 +++++++++++
 package/gpsd/gpsd.mk   |  6 ++++++
 2 files changed, 17 insertions(+)
package/gpsd/Config.in +11 -0
index 1b61f8c286..cbdcdb5725 100644
@@ -210,6 +210,17 @@ config BR2_PACKAGE_GPSD_UBX
 	help
 	  uBlox UBX binary support
 
+config BR2_PACKAGE_GPSD_CLIENTS
+	bool "gpsd clients"
+	default y # legacy
+	help
+	  Build and install gspd client programs, like:
+	    - gpsctl
+	    - gpsdctl
+	    - gpsdecode
+	    - gpspipe
+	    - ...
+
 config BR2_PACKAGE_GPSD_PYTHON
 	bool "build Python support and modules"
 	depends on BR2_USE_WCHAR # python3
package/gpsd/gpsd.mk +6 -0
index c57fad83c3..77c6f6c562 100644
@@ -178,6 +178,12 @@ ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y)
 GPSD_SCONS_OPTS += max_devices=$(BR2_PACKAGE_GPSD_MAX_DEV_VALUE)
 endif
 
+ifeq ($(BR2_PACKAGE_GPSD_CLIENTS),y)
+GPSD_SCONS_OPTS += gpsdclients=yes
+else
+GPSD_SCONS_OPTS += gpsdclients=no
+endif
+
 ifeq ($(BR2_PACKAGE_GPSD_PYTHON),y)
 GPSD_SCONS_OPTS += \
 	python=yes \
Signature · 18 lines
2.34.1

____________________________________________________________________________________________________________
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#8 lore raw

PATCH 5/5 package/gpsd: add option to enable/disable the daemon

In reply to [email protected]

From: "Yann E. MORIN" <[email protected]>

Some scenarii, like building an RTK base, does not require a gpsd daemon, but just a few python based tools (e.g. the python scripts to configure a GNSS device).

Add an option to enable or disable building and instaling the daemon. We make it enabled by default, for legacy purposes.

When the daemon is installed, it also installs a few ancillary helpers, which need some of the clients (e.g. the udev rule will use gpsdctl), so ensure they are enabled with the daemon.

Speaking of the udev rule: without the daemon, it does not need to be installed, so only try to fix its mode when the daemomn is installed.

Similarly for systemd, no need to install the drop-in when the daemon is not installed. And for sysv init, no need for a startup script without the daemon either.

Now that everything is optional, daemon, clients, and python stuff, we need to ensure that at least something is installed. The obvious solution would be to ensure that the daemon is installed, but that causes conflicts in the Kconfig depencies (elided for readability):

    config BR2_PACAKGE_GPSD
        bool "gpsd:
        select BR2_PACKAGE_GPSD_DAEMON if ! BR2_PACKAGE_GPSD_CLIENTS \
                                       && ! BR2_PACKAGE_GPSD_PYTHON

    config BR2_PACKAGE_GPSD_DAEMON
        bool "daemon"
        select BR2_PACKAGE_GPSD_CLIENTS

would cause errors like:

package/gpsd/Config.in:27:error: recursive dependency detected!
package/gpsd/Config.in:27: symbol BR2_PACKAGE_GPSD_DAEMON is selected by BR2_PACKAGE_GPSD_CLIENTS
package/gpsd/Config.in:226: symbol BR2_PACKAGE_GPSD_CLIENTS is selected by BR2_PACKAGE_GPSD_DAEMON

So we chose the next best option: ensure that the clients get built, if nothing else does.

---
 package/gpsd/Config.in | 13 +++++++++
 package/gpsd/gpsd.mk   | 62 ++++++++++++++++++++++++------------------
 2 files changed, 49 insertions(+), 26 deletions(-)
package/gpsd/Config.in +13 -0
index cbdcdb5725..92a124b8ac 100644
@@ -9,6 +9,8 @@ menuconfig BR2_PACKAGE_GPSD
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	# Always tries to build a shared library
 	depends on !BR2_STATIC_LIBS
+	select BR2_PACKAGE_GPSD_CLIENTS if !BR2_PACKAGE_GPSD_DAEMON \
+				       && !BR2_PACKAGE_GPSD_PYTHON
 	help
 	  gpsd is a service daemon that monitors one or more GPSes or
 	  AIS receivers attached to a host computer through serial or
@@ -22,6 +24,15 @@ menuconfig BR2_PACKAGE_GPSD
 
 if BR2_PACKAGE_GPSD
 
+config BR2_PACKAGE_GPSD_DAEMON
+	bool "gpsd daemon"
+	default y # legacy
+	select BR2_PACKAGE_GPSD_CLIENTS
+	help
+	  Build and install the gpsd daemon itself
+
+if BR2_PACKAGE_GPSD_DAEMON
+
 config BR2_PACKAGE_GPSD_DEVICES
 	string "Where to look for GPSes"
 	default "/dev/ttyS1"
@@ -210,6 +221,8 @@ config BR2_PACKAGE_GPSD_UBX
 	help
 	  uBlox UBX binary support
 
+endif  # GPSD_DAEMON
+
 config BR2_PACKAGE_GPSD_CLIENTS
 	bool "gpsd clients"
 	default y # legacy
package/gpsd/gpsd.mk +36 -26

86 lines not on this page · raw message

Signature · 18 lines
2.34.1

____________________________________________________________________________________________________________
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Reviewed-by Tested-by on v1 5/5
#9 lore raw

Re: [Buildroot] [PATCH 5/5] package/gpsd: add option to enable/disable the daemon

Hi,

V Tue, Jul 09, 2024 at 04:24:01PM +0200, [email protected] napsal(a):

Quoted 40 lines

From: "Yann E. MORIN" <[email protected]>

Some scenarii, like building an RTK base, does not require a gpsd daemon, but just a few python based tools (e.g. the python scripts to configure a GNSS device).

Add an option to enable or disable building and instaling the daemon. We make it enabled by default, for legacy purposes.

When the daemon is installed, it also installs a few ancillary helpers, which need some of the clients (e.g. the udev rule will use gpsdctl), so ensure they are enabled with the daemon.

Speaking of the udev rule: without the daemon, it does not need to be installed, so only try to fix its mode when the daemomn is installed.

Similarly for systemd, no need to install the drop-in when the daemon is not installed. And for sysv init, no need for a startup script without the daemon either.

Now that everything is optional, daemon, clients, and python stuff, we need to ensure that at least something is installed. The obvious solution would be to ensure that the daemon is installed, but that causes conflicts in the Kconfig depencies (elided for readability):

    config BR2_PACAKGE_GPSD
        bool "gpsd:
        select BR2_PACKAGE_GPSD_DAEMON if ! BR2_PACKAGE_GPSD_CLIENTS \
                                       && ! BR2_PACKAGE_GPSD_PYTHON

    config BR2_PACKAGE_GPSD_DAEMON
        bool "daemon"
        select BR2_PACKAGE_GPSD_CLIENTS

would cause errors like:

package/gpsd/Config.in:27:error: recursive dependency detected!
package/gpsd/Config.in:27: symbol BR2_PACKAGE_GPSD_DAEMON is selected by BR2_PACKAGE_GPSD_CLIENTS
package/gpsd/Config.in:226: symbol BR2_PACKAGE_GPSD_CLIENTS is selected by BR2_PACKAGE_GPSD_DAEMON

Quoted 5 lines

So we chose the next best option: ensure that the clients get built, if nothing else does.

Tested this with Raspberry Pi 0w with U-Blox module. First time I enabled Python tools only (tested ubxtool), then the daemon with clients.

Looks good to me.

Quoted 127 lines
---
 package/gpsd/Config.in | 13 +++++++++
 package/gpsd/gpsd.mk   | 62 ++++++++++++++++++++++++------------------
 2 files changed, 49 insertions(+), 26 deletions(-)
package/gpsd/Config.in +13 -0
index cbdcdb5725..92a124b8ac 100644
@@ -9,6 +9,8 @@ menuconfig BR2_PACKAGE_GPSD
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	# Always tries to build a shared library
 	depends on !BR2_STATIC_LIBS
+	select BR2_PACKAGE_GPSD_CLIENTS if !BR2_PACKAGE_GPSD_DAEMON \
+				       && !BR2_PACKAGE_GPSD_PYTHON
 	help
 	  gpsd is a service daemon that monitors one or more GPSes or
 	  AIS receivers attached to a host computer through serial or
@@ -22,6 +24,15 @@ menuconfig BR2_PACKAGE_GPSD
 
 if BR2_PACKAGE_GPSD
 
+config BR2_PACKAGE_GPSD_DAEMON
+	bool "gpsd daemon"
+	default y # legacy
+	select BR2_PACKAGE_GPSD_CLIENTS
+	help
+	  Build and install the gpsd daemon itself
+
+if BR2_PACKAGE_GPSD_DAEMON
+
 config BR2_PACKAGE_GPSD_DEVICES
 	string "Where to look for GPSes"
 	default "/dev/ttyS1"
@@ -210,6 +221,8 @@ config BR2_PACKAGE_GPSD_UBX
 	help
 	  uBlox UBX binary support
 
+endif  # GPSD_DAEMON
+
 config BR2_PACKAGE_GPSD_CLIENTS
 	bool "gpsd clients"
 	default y # legacy
package/gpsd/gpsd.mk +36 -17
index 77c6f6c562..8f87766dcc 100644
@@ -26,8 +26,7 @@ GPSD_SCONS_OPTS = \
 	prefix=/usr \
 	sysroot=$(STAGING_DIR) \
 	strip=no \
-	qt=no \
-	systemd=$(if $(BR2_INIT_SYSTEMD),yes,no)
+	qt=no
 
 ifeq ($(BR2_PACKAGE_NCURSES),y)
 GPSD_DEPENDENCIES += ncurses
@@ -178,6 +177,40 @@ ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y)
 GPSD_SCONS_OPTS += max_devices=$(BR2_PACKAGE_GPSD_MAX_DEV_VALUE)
 endif
 
+ifeq ($(BR2_PACKAGE_GPSD_DAEMON),y)
+GPSD_SCONS_OPTS += \
+	gpsd=yes \
+	systemd=$(if $(BR2_INIT_SYSTEMD),yes,no)
+
+GPSD_INSTALL_RULE = $(if $(BR2_PACKAGE_HAS_UDEV),udev-install,install)
+
+# When using chrony, wait for after Buildroot's chrony.service
+ifeq ($(BR2_PACKAGE_CHRONY),y)
+define GPSD_INSTALL_INIT_SYSTEMD
+	$(INSTALL) -D -m 0644 $(GPSD_PKGDIR)/br-chrony.conf \
+		$(TARGET_DIR)/usr/lib/systemd/system/gpsd.service.d/br-chrony.conf
+endef
+endif
+
+define GPSD_INSTALL_INIT_SYSV
+	$(INSTALL) -m 0755 -D package/gpsd/S50gpsd $(TARGET_DIR)/etc/init.d/S50gpsd
+	$(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd
+endef
+
+# After the udev rule is installed, make it writable so that this
+# package can be re-built/re-installed.
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
+define GPSD_INSTALL_UDEV_RULES
+	chmod u+w $(TARGET_DIR)/lib/udev/rules.d/25-gpsd.rules
+endef
+GPSD_POST_INSTALL_TARGET_HOOKS += GPSD_INSTALL_UDEV_RULES
+endif
+
+else # GPSD_DAEMON
+GPSD_SCONS_OPTS += gpsd=no systemd=no
+GPSD_INSTALL_RULE = install
+endif
+
 ifeq ($(BR2_PACKAGE_GPSD_CLIENTS),y)
 GPSD_SCONS_OPTS += gpsdclients=yes
 else
@@ -211,22 +244,9 @@ define GPSD_INSTALL_TARGET_CMDS
 		DESTDIR=$(TARGET_DIR) \
 		$(SCONS) \
 		$(GPSD_SCONS_OPTS) \
-		$(if $(BR2_PACKAGE_HAS_UDEV),udev-install,install))
+		$(GPSD_INSTALL_RULE))
 endef
 
-define GPSD_INSTALL_INIT_SYSV
-	$(INSTALL) -m 0755 -D package/gpsd/S50gpsd $(TARGET_DIR)/etc/init.d/S50gpsd
-	$(SED) 's,^DEVICES=.*,DEVICES=$(BR2_PACKAGE_GPSD_DEVICES),' $(TARGET_DIR)/etc/init.d/S50gpsd
-endef
-
-# When using chrony, wait for after Buildroot's chrony.service
-ifeq ($(BR2_PACKAGE_CHRONY),y)
-define GPSD_INSTALL_INIT_SYSTEMD
-	$(INSTALL) -D -m 0644 $(GPSD_PKGDIR)/br-chrony.conf \
-		$(TARGET_DIR)/usr/lib/systemd/system/gpsd.service.d/br-chrony.conf
-endef
-endif
-
 define GPSD_INSTALL_STAGING_CMDS
 	(cd $(@D); \
 		$(GPSD_SCONS_ENV) \
@@ -236,14 +256,4 @@ define GPSD_INSTALL_STAGING_CMDS
 		install)
 endef
 
-# After the udev rule is installed, make it writable so that this

package/gpsd/gpsd.mk define GPSD_INSTALL_STAGING_CMDS · line 259

Quoted 10 lines
package/gpsd/gpsd.mk +0 -9
-# package can be re-built/re-installed.
-ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
-define GPSD_INSTALL_UDEV_RULES
-	chmod u+w $(TARGET_DIR)/lib/udev/rules.d/25-gpsd.rules
-endef
-
-GPSD_POST_INSTALL_TARGET_HOOKS += GPSD_INSTALL_UDEV_RULES
-endif
-
 $(eval $(generic-package))

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Reviewed-by on v1 1/5
#2 lore raw

Re: [Buildroot] [PATCH 1/5] package/gpsd: condition python stuff to the proper kconfig option

In reply to [email protected]

Hi,

V Tue, Jul 09, 2024 at 04:23:57PM +0200, [email protected] napsal(a):

Quoted 11 lines

From: "Yann E. MORIN" <[email protected]>

Currently, we have a Kconfig symbol to enable the python support in gpsd, but the condition at configure time is based on whether the python package is enabled. So, if a user does not enable python support in gpsd, they still get it.

Switch to using the proper symbol.

Quoted 9 lines
---
 package/gpsd/gpsd.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/gpsd/gpsd.mk +0 -0
index 1d4013d122..c57fad83c3 100644

package/gpsd/gpsd.mk ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y) · line 184

Quoted 8 lines
package/gpsd/gpsd.mk +1 -1
@@ -178,7 +178,7 @@ ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y)
 GPSD_SCONS_OPTS += max_devices=$(BR2_PACKAGE_GPSD_MAX_DEV_VALUE)
 endif
 
-ifeq ($(BR2_PACKAGE_PYTHON3),y)
+ifeq ($(BR2_PACKAGE_GPSD_PYTHON),y)
 GPSD_SCONS_OPTS += \
 	python=yes \
 	python_libdir="/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages"

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#10 lore raw
In reply to [email protected]

Hello,

Quoted 6 lines · On Tue, 9 Jul 2024 16:23:58 +0200 <[email protected]> wrote:

Yann E. MORIN (5):
package/gpsd: condition python stuff to the proper kconfig option package/gpsd: fix comment about wchar requirement package/gpsd: move python option later
package/gpsd: add option to enable clients package/gpsd: add option to enable/disable the daemon

Thanks a lot! Series applied.

Thomas

Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#3 lore raw

Re: [Buildroot] [PATCH 1/5] package/gpsd: condition python stuff to the proper kconfig option

In reply to [email protected]
Quoted 8 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

<[email protected]> writes:

From: "Yann E. MORIN" <[email protected]>
Currently, we have a Kconfig symbol to enable the python support in gpsd, but the condition at configure time is based on whether the python package is enabled. So, if a user does not enable python support in gpsd, they still get it.

Quoted 4 lines

Switch to using the proper symbol.

Committed to 2024.02.x and 2024.05.x, thanks.

Signature · 5 lines
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#5 lore raw

Re: [Buildroot] [PATCH 2/5] package/gpsd: fix comment about wchar requirement

In reply to [email protected]
Quoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

<[email protected]> writes:

From: "Yann E. MORIN" <[email protected]>
The comment does not follow the coding style, so update it appropriately.

Committed to 2024.02.x and 2024.05.x, thanks.

Signature · 5 lines
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot