Implement compression support on BMG
Subsystems (2)
cover Implement compression support on BMG
Xe2+ has unified compression (exactly one compression mode/format), where compression is now controlled via PAT at PTE level. This simplifies KMD operations, as it can now decompress freely without concern for the buffer's original compression format—unlike DG2, which had multiple compression formats and thus required copying the raw CCS state during VRAM eviction. In addition mixed VRAM and system memory buffers were not supported with compression enabled.
On Xe2 dGPU compression is still only supported with VRAM, however we can now support compression with VRAM and system memory buffers, with GPU access being seamless underneath. So long as when doing VRAM -> system memory the KMD uses compressed -> uncompressed, to decompress it. This also allows CPU access to such buffers, assuming that userspace first decompress the corresponding pages being accessed.
If the pages are already in system memory then KMD would have already decompressed them. When restoring such buffers with sysmem -> VRAM the KMD can't easily know which pages were originally compressed, so we always use uncompressed -> uncompressed here.
With this it also means we can drop all the raw CCS handling on such platforms (including needing to allocate extra CCS storage).
In order to support this we now need to have two different identity
mappings for compressed and uncompressed VRAM.
In this patch, we set up the additional identity map for the VRAM with
compressed pat_index. We then select the appropriate mapping during migration/clear.During eviction (vram->sysmem), we use the mapping from compressed -> uncompressed. During restore (sysmem->vram), we need the mapping from uncompressed -> uncompressed. Therefore, we need to have two different mappings for compressed and uncompressed vram. We set up an additional identity map for the vram with compressedpat_index. We then select the appropriate mapping during migration/clear.
Akshata Jahagirdar (6):
drm/xe/xe2: Introduce identity map for compressed pat for vram drm/xe/migrate: Handle clear ccs logic for xe2 dgfx drm/xe/migrate: Add kunit to test clear functionality drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx drm/xe/migrate: Add kunit to test migration functionality for BMG drm/xe/xe2: Do not run xe_bo_test for xe2+ dgfx
drivers/gpu/drm/xe/tests/xe_bo.c | 6 + drivers/gpu/drm/xe/tests/xe_migrate.c | 389 +++++++++++++++++++++ drivers/gpu/drm/xe/tests/xe_migrate_test.c | 1 + drivers/gpu/drm/xe/tests/xe_migrate_test.h | 1 + drivers/gpu/drm/xe/xe_device.h | 5 + drivers/gpu/drm/xe/xe_migrate.c | 66 +++- 6 files changed, 450 insertions(+), 18 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/6 drm/xe/migrate: Handle clear ccs logic for xe2 dgfx
From: "Jahagirdar, Akshata" <[email protected]>
For Xe2 dGPU, we clear the bo by modifying the VRAM using an uncompressed pat index which then indirectly updates the compression status as uncompressed i.e zeroed CCS. So xe_migrate_clear() should be updated for BMG to not emit CCS surf copy commands.
--- drivers/gpu/drm/xe/xe_device.h | 5 +++++ drivers/gpu/drm/xe/xe_migrate.c | 6 +++--- 2 files changed, 8 insertions(+), 3 deletions(-)
drivers/gpu/drm/xe/xe_device.h +5 -0
@@ -144,6 +144,11 @@ static inline bool xe_device_has_flat_ccs(struct xe_device *xe)return xe->info.has_flat_ccs; } +static inline bool xe_device_needs_ccs_emit (struct xe_device *xe) +{ +return xe_device_has_flat_ccs (xe) && !(GRAPHICS_VER (xe) >=20 &&IS_DGFX (xe)); +} +static inline bool xe_device_has_sriov (struct xe_device *xe) {return xe->info.has_sriov;
drivers/gpu/drm/xe/xe_migrate.c +3 -3
@@ -420,7 +420,7 @@ struct xe_migrate *xe_migrate_init(struct xe_tile *tile)return ERR_PTR (err);if (IS_DGFX (xe)) { -if (xe_device_has_flat_ccs (xe)) +if (xe_device_needs_ccs_emit (xe))/* min chunk size corresponds to 4K of CCS Metadata */ m->min_chunk_size =SZ_4K *SZ_64K /xe_device_ccs_bytes (xe,SZ_64K );
@@ -1034,7 +1034,7 @@ struct dma_fence *xe_migrate_clear(struct xe_migrate *m, clear_system_ccs ?0 :emit_clear_cmd_len (gt),0 , avail_pts); -if (xe_device_has_flat_ccs (xe)) +if (xe_device_needs_ccs_emit (xe)) batch_size +=EMIT_COPY_CCS_DW ;/* Clear commands */
@@ -1062,7 +1062,7 @@ struct dma_fence *xe_migrate_clear(struct xe_migrate *m,if (!clear_system_ccs)emit_clear (gt, bb, clear_L0_ofs, clear_L0,XE_PAGE_SIZE , clear_vram); -if (xe_device_has_flat_ccs (xe)) { +if (xe_device_needs_ccs_emit (xe)) {emit_copy_ccs (gt, bb, clear_L0_ofs, true, m->cleared_mem_ofs, false, clear_L0); flush_flags =MI_FLUSH_DW_CCS ;
Signature · 1 line
2.34.1