Skip to contentSkip to conversation

Support ROHM KX134ACR-LBZ

PATCH In review Matti Vaittinen 2 participants 8 messages Nov 13, 2024 – Nov 15, 2024

Subsystems (4)
lore
Share & tools
lore

Matti Vaittinen

author maintainer
#0 lore raw

cover Support ROHM KX134ACR-LBZ

Patch series introducing support for ROHM KX134ACR-LBZ accelerometer

This series adds support for ROHM KX124ACR-LBZ. The KX134ACR-LBZ is almost identical to the KX132ACR-LBZ. The differencies visible to the driver are different g-ranges and the "Who am I" -identification register's value.

This series does also convert parts of the GTS helpers and the kx022a driver to use __cleanup - based scoped free/unlock operations.

The patch 1/5 contains GTS helper change, which is independent from the rest of the series. It can be applied/rejected independently.

Patch 2/5 changes kx022a to use scoped mutexes. It can also be applied as an independent improvement even if the kx134acr-lbz support was not added.

Patches 3-5/5 are all related to supporting kx134acr-lbz. 3/5 adding mechanisms for supporting sensors with different g-ranges, 4/5 being the binding doc and 5/5 bringing the actual support in the driver.

---

Matti Vaittinen (5):
iio: gts: Simplify using __free
iio: accel: kx022a: Use cleanup.h helpers
iio: accel: kx022a: Support ICs with different G-ranges
dt-bindings: ROHM KX134ACR-LBZ
iio: kx022a: Support ROHM KX134ACR-LBZ

 .../bindings/iio/accel/kionix,kx022a.yaml     |   4 +-
 drivers/iio/accel/kionix-kx022a-i2c.c         |   2 +
 drivers/iio/accel/kionix-kx022a-spi.c         |   2 +
 drivers/iio/accel/kionix-kx022a.c             | 129 +++++++++++-------
 drivers/iio/accel/kionix-kx022a.h             |   4 +
 drivers/iio/industrialio-gts-helper.c         |  17 +--
 6 files changed, 98 insertions(+), 60 deletions(-)

base-commit: 20fd1383cd616d61b2a79967da1221dc6cfb8430

Signature · 1 line
2.47.0
author maintainer
#1 lore raw

PATCH 1/5 iio: gts: Simplify using __free

The error path in the gain_to_scaletables() uses goto for unwinding an allocation on failure. This can be slightly simplified by using the automated free when exiting the scope.

Use __free(kfree) and drop the goto based error handling.

---
 drivers/iio/industrialio-gts-helper.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)
drivers/iio/industrialio-gts-helper.c +7 -10
index 5f131bc1a01e..85b43441b5d1 100644
@@ -4,6 +4,7 @@
  * Copyright (c) 2023 Matti Vaittinen <[email protected]>
  */
 
+#include <linux/cleanup.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/export.h>
@@ -168,7 +169,7 @@ static int iio_gts_gain_cmp(const void *a, const void *b)
 static int gain_to_scaletables(struct iio_gts *gts, int **gains, int **scales)
 {
 	int ret, i, j, new_idx, time_idx;
-	int *all_gains;
+	int *all_gains __free(kfree) = NULL;
 	size_t gain_bytes;
 
 	for (i = 0; i < gts->num_itime; i++) {
@@ -232,10 +233,9 @@ static int gain_to_scaletables(struct iio_gts *gts, int **gains, int **scales)
 
 	gts->avail_all_scales_table = kcalloc(new_idx, 2 * sizeof(int),
 					      GFP_KERNEL);
-	if (!gts->avail_all_scales_table) {
-		ret = -ENOMEM;
-		goto free_out;
-	}
+	if (!gts->avail_all_scales_table)
+		return -ENOMEM;
+
 	gts->num_avail_all_scales = new_idx;
 
 	for (i = 0; i < gts->num_avail_all_scales; i++) {
@@ -246,14 +246,11 @@ static int gain_to_scaletables(struct iio_gts *gts, int **gains, int **scales)
 		if (ret) {
 			kfree(gts->avail_all_scales_table);
 			gts->num_avail_all_scales = 0;
-			goto free_out;
+			return ret;
 		}
 	}
 
-free_out:
-	kfree(all_gains);
-
-	return ret;
+	return 0;
 }
 
 /**
Signature · 1 line
2.47.0
author maintainer
#2 lore raw

PATCH 2/5 iio: accel: kx022a: Use cleanup.h helpers

In reply to Matti Vaittinen

A few functions in KX022A need to use mutex for protecting the enabling/disabling of the measurement while configurations are being made. Some of the functions can be slightly simplified by using the __cleanup based scoped mutexes, which allows dropping the goto based unlocking at error path.

Simplify error paths using guard(mutex).

---
 drivers/iio/accel/kionix-kx022a.c | 61 ++++++++++++-------------------
 1 file changed, 23 insertions(+), 38 deletions(-)
drivers/iio/accel/kionix-kx022a.c +23 -38
index 32387819995d..321bb2c35578 100644
@@ -5,6 +5,7 @@
  * ROHM/KIONIX accelerometer driver
  */
 
+#include <linux/cleanup.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
@@ -448,7 +449,7 @@ static void kx022a_reg2scale(unsigned int val, unsigned int *val1,
 	*val2 = kx022a_scale_table[val][1];
 }
 
-static int kx022a_turn_on_off_unlocked(struct kx022a_data *data, bool on)
+static int __kx022a_turn_on_off(struct kx022a_data *data, bool on)
 {
 	int ret;
 
@@ -469,7 +470,7 @@ static int kx022a_turn_off_lock(struct kx022a_data *data)
 	int ret;
 
 	mutex_lock(&data->mutex);
-	ret = kx022a_turn_on_off_unlocked(data, false);
+	ret = __kx022a_turn_on_off(data, false);
 	if (ret)
 		mutex_unlock(&data->mutex);
 
@@ -480,7 +481,7 @@ static int kx022a_turn_on_unlock(struct kx022a_data *data)
 {
 	int ret;
 
-	ret = kx022a_turn_on_off_unlocked(data, true);
+	ret = __kx022a_turn_on_off(data, true);
 	mutex_unlock(&data->mutex);
 
 	return ret;
@@ -912,18 +913,19 @@ static int kx022a_fifo_disable(struct kx022a_data *data)
 {
 	int ret = 0;
 
-	ret = kx022a_turn_off_lock(data);
+	guard(mutex)(&data->mutex);
+	ret = __kx022a_turn_on_off(data, false);
 	if (ret)
 		return ret;
 
 	ret = regmap_clear_bits(data->regmap, data->ien_reg, KX022A_MASK_WMI);
 	if (ret)
-		goto unlock_out;
+		return ret;
 
 	ret = regmap_clear_bits(data->regmap, data->chip_info->buf_cntl2,
 				KX022A_MASK_BUF_EN);
 	if (ret)
-		goto unlock_out;
+		return ret;
 
 	data->state &= ~KX022A_STATE_FIFO;
 
@@ -931,12 +933,7 @@ static int kx022a_fifo_disable(struct kx022a_data *data)
 
 	kfree(data->fifo_buffer);
 
-	return kx022a_turn_on_unlock(data);
-
-unlock_out:
-	mutex_unlock(&data->mutex);
-
-	return ret;
+	return __kx022a_turn_on_off(data, true);
 }
 
 static int kx022a_buffer_predisable(struct iio_dev *idev)
@@ -959,33 +956,29 @@ static int kx022a_fifo_enable(struct kx022a_data *data)
 	if (!data->fifo_buffer)
 		return -ENOMEM;
 
-	ret = kx022a_turn_off_lock(data);
+	guard(mutex)(&data->mutex);
+	ret = __kx022a_turn_on_off(data, false);
 	if (ret)
 		return ret;
 
 	/* Update watermark to HW */
 	ret = kx022a_fifo_set_wmi(data);
 	if (ret)
-		goto unlock_out;
+		return ret;
 
 	/* Enable buffer */
 	ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2,
 			      KX022A_MASK_BUF_EN);
 	if (ret)
-		goto unlock_out;
+		return ret;
 
 	data->state |= KX022A_STATE_FIFO;
 	ret = regmap_set_bits(data->regmap, data->ien_reg,
 			      KX022A_MASK_WMI);
 	if (ret)
-		goto unlock_out;
-
-	return kx022a_turn_on_unlock(data);
-
-unlock_out:
-	mutex_unlock(&data->mutex);
+		return ret;
 
-	return ret;
+	return __kx022a_turn_on_off(data, true);
 }
 
 static int kx022a_buffer_postenable(struct iio_dev *idev)
@@ -1053,7 +1046,7 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private)
 	struct kx022a_data *data = iio_priv(idev);
 	irqreturn_t ret = IRQ_NONE;
 
-	mutex_lock(&data->mutex);
+	guard(mutex)(&data->mutex);
 
 	if (data->trigger_enabled) {
 		iio_trigger_poll_nested(data->trig);
@@ -1068,8 +1061,6 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private)
 			ret = IRQ_HANDLED;
 	}
 
-	mutex_unlock(&data->mutex);
-
 	return ret;
 }
 
@@ -1079,32 +1070,26 @@ static int kx022a_trigger_set_state(struct iio_trigger *trig,
 	struct kx022a_data *data = iio_trigger_get_drvdata(trig);
 	int ret = 0;
 
-	mutex_lock(&data->mutex);
+	guard(mutex)(&data->mutex);
 
 	if (data->trigger_enabled == state)
-		goto unlock_out;
+		return 0;
 
 	if (data->state & KX022A_STATE_FIFO) {
 		dev_warn(data->dev, "Can't set trigger when FIFO enabled\n");
-		ret = -EBUSY;
-		goto unlock_out;
+		return -EBUSY;
 	}
 
-	ret = kx022a_turn_on_off_unlocked(data, false);
+	ret = __kx022a_turn_on_off(data, false);
 	if (ret)
-		goto unlock_out;
+		return ret;
 
 	data->trigger_enabled = state;
 	ret = kx022a_set_drdy_irq(data, state);
 	if (ret)
-		goto unlock_out;
-
-	ret = kx022a_turn_on_off_unlocked(data, true);
-
-unlock_out:
-	mutex_unlock(&data->mutex);
+		return ret;
 
-	return ret;
+	return __kx022a_turn_on_off(data, true);
 }
 
 static const struct iio_trigger_ops kx022a_trigger_ops = {
Signature · 1 line
2.47.0
author maintainer
#3 lore raw

PATCH 3/5 iio: accel: kx022a: Support ICs with different G-ranges

In reply to Matti Vaittinen

The register interface of the ROHM KX134ACR-LBZ accelerometer is almost identical to the KX132ACR-LBZ. Main difference between these accelerometers is that the KX134ACR-LBZ supports G-ranges +/- 8, 16, 32 and 64G. All the other sensors supported by the kx022a driver can measure +/- 2, 4, 8 and 16G.

Prepare supporting the KX134ACR-LBZ with different G-ranges by storing a pointer to the scale tables in IC specific structure.

---
 drivers/iio/accel/kionix-kx022a.c | 32 ++++++++++++++++++++-----------
 drivers/iio/accel/kionix-kx022a.h |  2 ++
 2 files changed, 23 insertions(+), 11 deletions(-)
drivers/iio/accel/kionix-kx022a.c +21 -11
index 321bb2c35578..e2e41dea9d9f 100644
@@ -413,6 +413,8 @@ static int kx022a_read_avail(struct iio_dev *indio_dev,
 			     const int **vals, int *type, int *length,
 			     long mask)
 {
+	struct kx022a_data *data = iio_priv(indio_dev);
+
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*vals = (const int *)kx022a_accel_samp_freq_table;
@@ -421,9 +423,8 @@ static int kx022a_read_avail(struct iio_dev *indio_dev,
 		*type = IIO_VAL_INT_PLUS_MICRO;
 		return IIO_AVAIL_LIST;
 	case IIO_CHAN_INFO_SCALE:
-		*vals = (const int *)kx022a_scale_table;
-		*length = ARRAY_SIZE(kx022a_scale_table) *
-			  ARRAY_SIZE(kx022a_scale_table[0]);
+		*vals = (const int *)data->chip_info->scale_table;
+		*length = data->chip_info->scale_table_size;
 		*type = IIO_VAL_INT_PLUS_NANO;
 		return IIO_AVAIL_LIST;
 	default:
@@ -439,14 +440,14 @@ static void kx022a_reg2freq(unsigned int val,  int *val1, int *val2)
 	*val2 = kx022a_accel_samp_freq_table[val & KX022A_MASK_ODR][1];
 }
 
-static void kx022a_reg2scale(unsigned int val, unsigned int *val1,
-			     unsigned int *val2)
+static void kx022a_reg2scale(struct kx022a_data *data, unsigned int val,
+			     unsigned int *val1, unsigned int *val2)
 {
 	val &= KX022A_MASK_GSEL;
 	val >>= KX022A_GSEL_SHIFT;
 
-	*val1 = kx022a_scale_table[val][0];
-	*val2 = kx022a_scale_table[val][1];
+	*val1 = data->chip_info->scale_table[val][0];
+	*val2 = data->chip_info->scale_table[val][1];
 }
 
 static int __kx022a_turn_on_off(struct kx022a_data *data, bool on)
@@ -544,11 +545,11 @@ static int kx022a_write_raw(struct iio_dev *idev,
 		kx022a_turn_on_unlock(data);
 		break;
 	case IIO_CHAN_INFO_SCALE:
-		n = ARRAY_SIZE(kx022a_scale_table);
+		n = data->chip_info->scale_table_size / 2;
 
 		while (n-- > 0)
-			if (val == kx022a_scale_table[n][0] &&
-			    val2 == kx022a_scale_table[n][1])
+			if (val == data->chip_info->scale_table[n][0] &&
+			    val2 == data->chip_info->scale_table[n][1])
 				break;
 		if (n < 0) {
 			ret = -EINVAL;
@@ -643,7 +644,7 @@ static int kx022a_read_raw(struct iio_dev *idev,
 		if (ret < 0)
 			return ret;
 
-		kx022a_reg2scale(regval, val, val2);
+		kx022a_reg2scale(data, regval, val, val2);
 
 		return IIO_VAL_INT_PLUS_NANO;
 	}
@@ -1143,6 +1144,9 @@ const struct kx022a_chip_info kx022a_chip_info = {
 	.regmap_config			= &kx022a_regmap_config,
 	.channels			= kx022a_channels,
 	.num_channels			= ARRAY_SIZE(kx022a_channels),
+	.scale_table			= kx022a_scale_table,
+	.scale_table_size		= ARRAY_SIZE(kx022a_scale_table) *
+					  ARRAY_SIZE(kx022a_scale_table[0]),
 	.fifo_length			= KX022A_FIFO_LENGTH,
 	.who				= KX022A_REG_WHO,
 	.id				= KX022A_ID,
@@ -1168,6 +1172,9 @@ const struct kx022a_chip_info kx132_chip_info = {
 	.regmap_config		  = &kx132_regmap_config,
 	.channels		  = kx132_channels,
 	.num_channels		  = ARRAY_SIZE(kx132_channels),
+	.scale_table			= kx022a_scale_table,
+	.scale_table_size		= ARRAY_SIZE(kx022a_scale_table) *
+					  ARRAY_SIZE(kx022a_scale_table[0]),
 	.fifo_length		  = KX132_FIFO_LENGTH,
 	.who			  = KX132_REG_WHO,
 	.id			  = KX132_ID,
@@ -1201,6 +1208,9 @@ const struct kx022a_chip_info kx132acr_chip_info = {
 	.regmap_config			= &kx022a_regmap_config,
 	.channels			= kx022a_channels,
 	.num_channels			= ARRAY_SIZE(kx022a_channels),
+	.scale_table			= kx022a_scale_table,
+	.scale_table_size		= ARRAY_SIZE(kx022a_scale_table) *
+					  ARRAY_SIZE(kx022a_scale_table[0]),
 	.fifo_length			= KX022A_FIFO_LENGTH,
 	.who				= KX022A_REG_WHO,
 	.id				= KX132ACR_LBZ_ID,
drivers/iio/accel/kionix-kx022a.h +2 -0
index 7060438ad88c..36e9d9de8c13 100644
@@ -161,6 +161,8 @@ struct kx022a_data;
 struct kx022a_chip_info {
 	const char *name;
 	const struct regmap_config *regmap_config;
+	const int (*scale_table)[2];
+	const int scale_table_size;
 	const struct iio_chan_spec *channels;
 	unsigned int num_channels;
 	unsigned int fifo_length;
Signature · 1 line
2.47.0
author maintainer
#4 lore raw

PATCH 4/5 dt-bindings: ROHM KX134ACR-LBZ

In reply to Matti Vaittinen

Add compatible and information for ROHM KX134ACR-LBZ accelerometer.

---
 .../devicetree/bindings/iio/accel/kionix,kx022a.yaml          | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml +3 -1
index 66ea894dbe55..c973f4941a6d 100644
@@ -11,7 +11,8 @@ maintainers:
 
 description: |
   KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting
-  +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a
+  +/- 2G, 4G, 8G and 16G ranges. The KX134ACR-LBZ supports +/- 8G, 16G,
+  32G and 64G. All the sensors also have variable output data-rates and a
   hardware-fifo buffering. These accelerometers can be accessed either
   via I2C or SPI.
 
@@ -21,6 +22,7 @@ properties:
       - kionix,kx022a
       - kionix,kx132-1211
       - rohm,kx132acr-lbz
+      - rohm,kx134acr-lbz
 
   reg:
     maxItems: 1
Signature · 1 line
2.47.0
author maintainer
#7 lore raw

PATCH 5/5 iio: kx022a: Support ROHM KX134ACR-LBZ

In reply to Matti Vaittinen

The register interface of the ROHM KX134ACR-LBZ accelerometer is almost identical to the KX132ACR-LBZ. The main difference between these accelerometers is that the KX134ACR-LBZ supports different G-ranges. The driver can model this by informing different scale to users. Also, the content of the "who_am_I" register is different.

Add an ID and scales for the KX134ACR-LBZ.

---
 drivers/iio/accel/kionix-kx022a-i2c.c |  2 ++
 drivers/iio/accel/kionix-kx022a-spi.c |  2 ++
 drivers/iio/accel/kionix-kx022a.c     | 36 +++++++++++++++++++++++++++
 drivers/iio/accel/kionix-kx022a.h     |  2 ++
 4 files changed, 42 insertions(+)
drivers/iio/accel/kionix-kx022a-i2c.c +2 -0
index 8a1d4fc28ddd..9fd049c2b62e 100644
@@ -39,6 +39,7 @@ static const struct i2c_device_id kx022a_i2c_id[] = {
 	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
 	{ .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info },
 	{ .name = "kx132acr-lbz", .driver_data = (kernel_ulong_t)&kx132acr_chip_info },
+	{ .name = "kx134acr-lbz", .driver_data = (kernel_ulong_t)&kx134acr_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id);
@@ -47,6 +48,7 @@ static const struct of_device_id kx022a_of_match[] = {
 	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
 	{ .compatible = "kionix,kx132-1211", .data = &kx132_chip_info },
 	{ .compatible = "rohm,kx132acr-lbz", .data = &kx132acr_chip_info },
+	{ .compatible = "rohm,kx134acr-lbz", .data = &kx134acr_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
drivers/iio/accel/kionix-kx022a-spi.c +2 -0
index f798b964d0b5..b20978afc565 100644
@@ -39,6 +39,7 @@ static const struct spi_device_id kx022a_id[] = {
 	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
 	{ .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info },
 	{ .name = "kx132acr-lbz", .driver_data = (kernel_ulong_t)&kx132acr_chip_info },
+	{ .name = "kx134acr-lbz", .driver_data = (kernel_ulong_t)&kx134acr_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, kx022a_id);
@@ -47,6 +48,7 @@ static const struct of_device_id kx022a_of_match[] = {
 	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
 	{ .compatible = "kionix,kx132-1211", .data = &kx132_chip_info },
 	{ .compatible = "rohm,kx132acr-lbz", .data = &kx132acr_chip_info },
+	{ .compatible = "rohm,kx134acr-lbz", .data = &kx134acr_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
drivers/iio/accel/kionix-kx022a.c +36 -0
index e2e41dea9d9f..e3b47a6eac18 100644
@@ -408,6 +408,14 @@ static const int kx022a_scale_table[][2] = {
 	{ 0, 4788403 },
 };
 
+/* KX134ACR-LBZ ranges are (+/-) 8, 16, 32, 64 G */
+static const int kx134acr_lbz_scale_table[][2] = {
+	{ 0, 2394202 },
+	{ 0, 4788403 },
+	{ 0, 9576807 },
+	{ 0, 19153613 },
+};
+
 static int kx022a_read_avail(struct iio_dev *indio_dev,
 			     struct iio_chan_spec const *chan,
 			     const int **vals, int *type, int *length,
@@ -1231,6 +1239,34 @@ const struct kx022a_chip_info kx132acr_chip_info = {
 };
 EXPORT_SYMBOL_NS_GPL(kx132acr_chip_info, IIO_KX022A);
 
+const struct kx022a_chip_info kx134acr_chip_info = {
+	.name				= "kx134acr-lbz",
+	.regmap_config			= &kx022a_regmap_config,
+	.channels			= kx022a_channels,
+	.num_channels			= ARRAY_SIZE(kx022a_channels),
+	.scale_table			= kx134acr_lbz_scale_table,
+	.scale_table_size		= ARRAY_SIZE(kx134acr_lbz_scale_table) *
+					  ARRAY_SIZE(kx134acr_lbz_scale_table[0]),
+	.fifo_length			= KX022A_FIFO_LENGTH,
+	.who				= KX022A_REG_WHO,
+	.id				= KX134ACR_LBZ_ID,
+	.cntl				= KX022A_REG_CNTL,
+	.cntl2				= KX022A_REG_CNTL2,
+	.odcntl				= KX022A_REG_ODCNTL,
+	.buf_cntl1			= KX022A_REG_BUF_CNTL1,
+	.buf_cntl2			= KX022A_REG_BUF_CNTL2,
+	.buf_clear			= KX022A_REG_BUF_CLEAR,
+	.buf_status1			= KX022A_REG_BUF_STATUS_1,
+	.buf_read			= KX022A_REG_BUF_READ,
+	.inc1				= KX022A_REG_INC1,
+	.inc4				= KX022A_REG_INC4,
+	.inc5				= KX022A_REG_INC5,
+	.inc6				= KX022A_REG_INC6,
+	.xout_l				= KX022A_REG_XOUT_L,
+	.get_fifo_bytes_available	= kx022a_get_fifo_bytes_available,
+};
+EXPORT_SYMBOL_NS_GPL(kx134acr_chip_info, IIO_KX022A);
+
 int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info)
 {
 	static const char * const regulator_names[] = {"io-vdd", "vdd"};
drivers/iio/accel/kionix-kx022a.h +2 -0
index 36e9d9de8c13..ea32fd252a38 100644
@@ -14,6 +14,7 @@
 #define KX022A_REG_WHO		0x0f
 #define KX022A_ID		0xc8
 #define KX132ACR_LBZ_ID		0xd8
+#define KX134ACR_LBZ_ID		0xcc
 
 #define KX022A_REG_CNTL2	0x19
 #define KX022A_MASK_SRST	BIT(7)
@@ -190,5 +191,6 @@ int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chi
 extern const struct kx022a_chip_info kx022a_chip_info;
 extern const struct kx022a_chip_info kx132_chip_info;
 extern const struct kx022a_chip_info kx132acr_chip_info;
+extern const struct kx022a_chip_info kx134acr_chip_info;
 
 #endif
Signature · 1 line
2.47.0
Acked-by on v1 4/5
#5 lore raw

Re: [PATCH 4/5] dt-bindings: ROHM KX134ACR-LBZ

In reply to Matti Vaittinen
Quoted 1 line · Matti Vaittinen

Add compatible and information for ROHM KX134ACR-LBZ accelerometer.

The commit message mention what makes this device incompatible - but I'll let you away with it the description below contains it.

Quoted 31 lines
---
 .../devicetree/bindings/iio/accel/kionix,kx022a.yaml          | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml +3 -1
index 66ea894dbe55..c973f4941a6d 100644
@@ -11,7 +11,8 @@ maintainers:
 
 description: |
   KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting
-  +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a
+  +/- 2G, 4G, 8G and 16G ranges. The KX134ACR-LBZ supports +/- 8G, 16G,
+  32G and 64G. All the sensors also have variable output data-rates and a
   hardware-fifo buffering. These accelerometers can be accessed either
   via I2C or SPI.
 
@@ -21,6 +22,7 @@ properties:
       - kionix,kx022a
       - kionix,kx132-1211
       - rohm,kx132acr-lbz
+      - rohm,kx134acr-lbz
 
   reg:
     maxItems: 1
Signature · 1 line
2.47.0
author maintainer
#6 lore raw

Re: [PATCH 4/5] dt-bindings: ROHM KX134ACR-LBZ

Quoted 6 lines · Conor Dooley
Quoted 1 line · Matti Vaittinen

Add compatible and information for ROHM KX134ACR-LBZ accelerometer.

The commit message mention what makes this device incompatible - but I'll let you away with it the description below contains it.

Thanks for pointing it out Conor. I agree the commit message should describe the KX134ACR-LBZ a bit better. I'll improve the commit message to include the g-range difference if I re-spin this series - and try to remember this if I get to support also some other variants :) A very good head's up for me as I didn't even think of describing the differences in commit message!

Yours,
-- Matti