Skip to contentSkip to conversation

Timestamp and PulSAR support for ad4000

PATCH Superseded Marcelo Schmitt 2 participants 6 messages Nov 26, 2024 – Nov 27, 2024

Subsystems (4)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH v4 1/4 dt-bindings: iio: adc: adi,ad4000: Add PulSAR

In reply to Marcelo Schmitt

Extend the AD4000 series device tree documentation to also describe PulSAR devices.

The single-channel series of PulSAR devices is similar to the AD4000 series except PulSAR devices sample at slower rates and don't have a configuration register. Because PulSAR devices don't have a configuration register, they don't support all features of AD4000 devices and thus fewer interfaces are provided to user space. Also, while AD4000 may have their SDI pin connected to SPI host MOSI line, PulSAR SDI pin is never connected to MOSI.

Some devices within the PulSAR series are just faster versions of others. From fastest to slowest, AD7980, AD7988-5, AD7686, AD7685, and AD7988-1 are all 16-bit pseudo-differential pin-for-pin compatible ADCs. Devices that only vary on the sample rate are documented with a common fallback compatible.

---
Change log v3 -> v4
- Sorted compatible strings in alphabetical order.
- Left only fallback compatibles in allOf check list for adi,sdi-pin property.
- Improved patch description with explanation about how the AD4000 and PulSAR devices are different.

Well, I didn't manage to get a dtbs_check message for all the cases I was expecting to cover, yet. I trust the test done by maintainers while I don't figure out what's wrong with my setup.

FWIW, here's what I tried:

Cloned dt-binding tree from git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
Fetched and checked out dt/next branch.
Applied AD4000/PulSAR patches.
- <62dd96ac9cd> ("iio: adc: ad4000: fix reading unsigned data")
- <8ebfd0925521> ("iio: adc: ad4000: Check for error code from devm_mutex_init() call")
- the patches from this patch series

Cloned dtc from git://git.kernel.org/pub/scm/utils/dtc/dtc.git into a directory at the same level of linux kernel source dir.

Cloned dt-schema from https://github.com/devicetree-org/dt-schema.git into a directory at the same level of linux kernel source dir.
Within dt-schema,
mkdir venv
python3 -m venv venv/
source venv/bin/activate
python3 -m ensurepip --default-pip
python3 -m pip install --upgrade pip setuptools wheel
pip install yamllint
pip install dtschema --upgrade
pip install -e .

export ARCH=arm; export CROSS_COMPILE=arm-linux-gnueabi-
Ran ./scripts/dtc/update-dtc-source.sh from the top level of Linux source tree.
make defconfig
Added zynq-coraz7s-ad7685.dts to arch/arm/boot/dts/xilinx/.
Added zynq-coraz7s-ad7685.dtb to arch/arm/boot/dts/xilinx/Makefile.
make -j4 dtbs_check # but it didn't print anything about adi,sdi-pin value.
Changed the compatible from "adi,ad7685" to "adi,ad7687" and dtbs_check prints arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7685.dtb: adc@0: adi,sdi-pin:0: 'sdi' is not one of ['high', 'low', 'cs']

-zynq-coraz7s-ad7685.dts file {
// SPDX-License-Identifier: GPL-2.0

/dts-v1/;
#include "zynq-7000.dtsi"

/ {
	adc_vref: regulator-vref {
		compatible = "regulator-fixed";
		regulator-name = "EVAL 5V Vref";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};

	adc_vdd: regulator-vdd {
		compatible = "regulator-fixed";
		regulator-name = "Eval VDD supply";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};

	adc_vio: regulator-vio {
		compatible = "regulator-fixed";
		regulator-name = "Eval VIO supply";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};
};
&spi0 {
	adc@0 {
		compatible = "adi,ad7685";
		reg = <0>;
		spi-max-frequency = <40000000>;
		vdd-supply = <&adc_vdd>;
		vio-supply = <&adc_vio>;
		ref-supply = <&adc_vref>;
		adi,sdi-pin = "sdi";
	};
};

-} zynq-coraz7s-ad7685.dts file

 .../bindings/iio/adc/adi,ad4000.yaml          | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml +56 -0
index e413a9d8d2a2..3c1171c7f0e1 100644
@@ -19,6 +19,20 @@ description: |
     https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf
 
 $ref: /schemas/spi/spi-peripheral-props.yaml#
 
@@ -63,6 +77,32 @@ properties:
 
       - const: adi,adaq4003
 
+      - items:
+          - enum:
+              - adi,ad7685
+              - adi,ad7686
+              - adi,ad7980
+              - adi,ad7988-1
+              - adi,ad7988-5
+          - const: adi,ad7983
+
+      - items:
+          - enum:
+              - adi,ad7688
+              - adi,ad7693
+          - const: adi,ad7687
+
+      - items:
+          - enum:
+              - adi,ad7690
+              - adi,ad7982
+              - adi,ad7984
+          - const: adi,ad7691
+
+      - enum:
+          - adi,ad7942
+          - adi,ad7946
+
   reg:
     maxItems: 1
 
@@ -133,6 +173,22 @@ required:
   - ref-supply
 
 allOf:
+  # Single-channel PulSAR devices have SDI either tied to VIO, GND, or host CS.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7687
+              - adi,ad7691
+              - adi,ad7942
+              - adi,ad7946
+              - adi,ad7983
+    then:
+      properties:
+        adi,sdi-pin:
+          enum: [ high, low, cs ]
+          default: cs
   # The configuration register can only be accessed if SDI is connected to MOSI
   - if:
       required:
Signature · 1 line
2.45.2
author maintainer
#3 lore raw

PATCH v4 2/4 iio: adc: ad4000: Add timestamp channel

In reply to Marcelo Schmitt

The ADC data is pushed to the IIO buffer along with timestamp but no timestamp channel was provided to retried the time data. Add a timestamp channel to provide sample capture time.

---
 drivers/iio/adc/ad4000.c | 98 +++++++++++++++++++++++-----------------
 1 file changed, 56 insertions(+), 42 deletions(-)
drivers/iio/adc/ad4000.c +56 -42
index b3b82535f5c1..21731c4d31ee 100644
@@ -49,6 +49,7 @@
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |				\
 			      BIT(IIO_CHAN_INFO_SCALE),				\
 	.info_mask_separate_available = _reg_access ? BIT(IIO_CHAN_INFO_SCALE) : 0,\
+	.scan_index = 0,							\
 	.scan_type = {								\
 		.sign = _sign,							\
 		.realbits = _real_bits,						\
@@ -62,6 +63,12 @@
 	__AD4000_DIFF_CHANNEL((_sign), (_real_bits),				\
 				     ((_real_bits) > 16 ? 32 : 16), (_reg_access))
 
+#define AD4000_DIFF_CHANNELS(_sign, _real_bits, _reg_access)			\
+{										\
+	AD4000_DIFF_CHANNEL(_sign, _real_bits, _reg_access),			\
+	IIO_CHAN_SOFT_TIMESTAMP(1)						\
+}
+
 #define __AD4000_PSEUDO_DIFF_CHANNEL(_sign, _real_bits, _storage_bits, _reg_access)\
 {										\
 	.type = IIO_VOLTAGE,							\
@@ -71,6 +78,7 @@
 			      BIT(IIO_CHAN_INFO_SCALE) |			\
 			      BIT(IIO_CHAN_INFO_OFFSET),			\
 	.info_mask_separate_available = _reg_access ? BIT(IIO_CHAN_INFO_SCALE) : 0,\
+	.scan_index = 0,							\
 	.scan_type = {								\
 		.sign = _sign,							\
 		.realbits = _real_bits,						\
@@ -84,6 +92,12 @@
 	__AD4000_PSEUDO_DIFF_CHANNEL((_sign), (_real_bits),			\
 				     ((_real_bits) > 16 ? 32 : 16), (_reg_access))
 
+#define AD4000_PSEUDO_DIFF_CHANNELS(_sign, _real_bits, _reg_access)		\
+{										\
+	AD4000_PSEUDO_DIFF_CHANNEL(_sign, _real_bits, _reg_access),		\
+	IIO_CHAN_SOFT_TIMESTAMP(1)						\
+}
+
 static const char * const ad4000_power_supplies[] = {
 	"vdd", "vio"
 };
@@ -110,106 +124,106 @@ static const int ad4000_gains[] = {
 
 struct ad4000_chip_info {
 	const char *dev_name;
-	struct iio_chan_spec chan_spec;
-	struct iio_chan_spec reg_access_chan_spec;
+	struct iio_chan_spec chan_spec[2];
+	struct iio_chan_spec reg_access_chan_spec[2];
 	bool has_hardware_gain;
 };
 
 static const struct ad4000_chip_info ad4000_chip_info = {
 	.dev_name = "ad4000",
-	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 0),
-	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 1),
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 1),
 };
 
 static const struct ad4000_chip_info ad4001_chip_info = {
 	.dev_name = "ad4001",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 16, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 16, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 16, 1),
 };
 
 static const struct ad4000_chip_info ad4002_chip_info = {
 	.dev_name = "ad4002",
-	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 0),
-	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 1),
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 0),
+	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 1),
 };
 
 static const struct ad4000_chip_info ad4003_chip_info = {
 	.dev_name = "ad4003",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
 };
 
 static const struct ad4000_chip_info ad4004_chip_info = {
 	.dev_name = "ad4004",
-	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 0),
-	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 1),
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 1),
 };
 
 static const struct ad4000_chip_info ad4005_chip_info = {
 	.dev_name = "ad4005",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 16, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 16, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 16, 1),
 };
 
 static const struct ad4000_chip_info ad4006_chip_info = {
 	.dev_name = "ad4006",
-	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 0),
-	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 1),
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 0),
+	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 1),
 };
 
 static const struct ad4000_chip_info ad4007_chip_info = {
 	.dev_name = "ad4007",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
 };
 
 static const struct ad4000_chip_info ad4008_chip_info = {
 	.dev_name = "ad4008",
-	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 0),
-	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 1),
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 1),
 };
 
 static const struct ad4000_chip_info ad4010_chip_info = {
 	.dev_name = "ad4010",
-	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 0),
-	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 1),
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 0),
+	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 1),
 };
 
 static const struct ad4000_chip_info ad4011_chip_info = {
 	.dev_name = "ad4011",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
 };
 
 static const struct ad4000_chip_info ad4020_chip_info = {
 	.dev_name = "ad4020",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 20, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 20, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 20, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 20, 1),
 };
 
 static const struct ad4000_chip_info ad4021_chip_info = {
 	.dev_name = "ad4021",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 20, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 20, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 20, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 20, 1),
 };
 
 static const struct ad4000_chip_info ad4022_chip_info = {
 	.dev_name = "ad4022",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 20, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 20, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 20, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 20, 1),
 };
 
 static const struct ad4000_chip_info adaq4001_chip_info = {
 	.dev_name = "adaq4001",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 16, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 16, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 16, 1),
 	.has_hardware_gain = true,
 };
 
 static const struct ad4000_chip_info adaq4003_chip_info = {
 	.dev_name = "adaq4003",
-	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
-	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
 	.has_hardware_gain = true,
 };
 
@@ -591,7 +605,7 @@ static int ad4000_probe(struct spi_device *spi)
 	switch (st->sdi_pin) {
 	case AD4000_SDI_MOSI:
 		indio_dev->info = &ad4000_reg_access_info;
-		indio_dev->channels = &chip->reg_access_chan_spec;
+		indio_dev->channels = chip->reg_access_chan_spec;
 
 		/*
 		 * In "3-wire mode", the ADC SDI line must be kept high when
@@ -603,7 +617,7 @@ static int ad4000_probe(struct spi_device *spi)
 		if (ret < 0)
 			return ret;
 
-		ret = ad4000_prepare_3wire_mode_message(st, indio_dev->channels);
+		ret = ad4000_prepare_3wire_mode_message(st, &indio_dev->channels[0]);
 		if (ret)
 			return ret;
 
@@ -614,16 +628,16 @@ static int ad4000_probe(struct spi_device *spi)
 		break;
 	case AD4000_SDI_VIO:
 		indio_dev->info = &ad4000_info;
-		indio_dev->channels = &chip->chan_spec;
-		ret = ad4000_prepare_3wire_mode_message(st, indio_dev->channels);
+		indio_dev->channels = chip->chan_spec;
+		ret = ad4000_prepare_3wire_mode_message(st, &indio_dev->channels[0]);
 		if (ret)
 			return ret;
 
 		break;
 	case AD4000_SDI_CS:
 		indio_dev->info = &ad4000_info;
-		indio_dev->channels = &chip->chan_spec;
-		ret = ad4000_prepare_4wire_mode_message(st, indio_dev->channels);
+		indio_dev->channels = chip->chan_spec;
+		ret = ad4000_prepare_4wire_mode_message(st, &indio_dev->channels[0]);
 		if (ret)
 			return ret;
 
@@ -637,7 +651,7 @@ static int ad4000_probe(struct spi_device *spi)
 	}
 
 	indio_dev->name = chip->dev_name;
-	indio_dev->num_channels = 1;
+	indio_dev->num_channels = 2;
 
 	ret = devm_mutex_init(dev, &st->lock);
 	if (ret)
@@ -658,7 +672,7 @@ static int ad4000_probe(struct spi_device *spi)
 		}
 	}
 
-	ad4000_fill_scale_tbl(st, indio_dev->channels);
+	ad4000_fill_scale_tbl(st, &indio_dev->channels[0]);
 
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
 					      &iio_pollfunc_store_time,
Signature · 1 line
2.45.2
author maintainer
#4 lore raw

PATCH v4 3/4 iio: adc: ad4000: Use device specific timing for SPI transfers

In reply to Marcelo Schmitt

The SPI transfers for AD4020, AD4021, and AD4022 have slightly different timing specifications. Use device specific timing constraints to set SPI transfer parameters. While tweaking time constraints, remove time related defines including unused AD4000_TQUIET1_NS.

---
 drivers/iio/adc/ad4000.c | 51 +++++++++++++++++++++++++++++++++-------
 1 file changed, 42 insertions(+), 9 deletions(-)
drivers/iio/adc/ad4000.c +42 -9
index 21731c4d31ee..c700d51b5637 100644
@@ -35,10 +35,6 @@
 
 #define AD4000_SCALE_OPTIONS		2
 
-#define AD4000_TQUIET1_NS		190
-#define AD4000_TQUIET2_NS		60
-#define AD4000_TCONV_NS			320
-
 #define __AD4000_DIFF_CHANNEL(_sign, _real_bits, _storage_bits, _reg_access)	\
 {										\
 	.type = IIO_VOLTAGE,							\
@@ -122,10 +118,31 @@ static const int ad4000_gains[] = {
 	454, 909, 1000, 1900,
 };
 
+struct ad4000_time_spec {
+	int t_conv_ns;
+	int t_quiet2_ns;
+};
+
+/*
+ * Same timing specifications for all of AD4000, AD4001, ..., AD4008, AD4010,
+ * ADAQ4001, and ADAQ4003.
+ */
+static const struct ad4000_time_spec ad4000_t_spec = {
+	.t_conv_ns = 320,
+	.t_quiet2_ns = 60,
+};
+
+/* AD4020, AD4021, AD4022 */
+static const struct ad4000_time_spec ad4020_t_spec = {
+	.t_conv_ns = 350,
+	.t_quiet2_ns = 60,
+};
+
 struct ad4000_chip_info {
 	const char *dev_name;
 	struct iio_chan_spec chan_spec[2];
 	struct iio_chan_spec reg_access_chan_spec[2];
+	const struct ad4000_time_spec *time_spec;
 	bool has_hardware_gain;
 };
 
@@ -133,90 +150,105 @@ static const struct ad4000_chip_info ad4000_chip_info = {
 	.dev_name = "ad4000",
 	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
 	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4001_chip_info = {
 	.dev_name = "ad4001",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 16, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4002_chip_info = {
 	.dev_name = "ad4002",
 	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 0),
 	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4003_chip_info = {
 	.dev_name = "ad4003",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4004_chip_info = {
 	.dev_name = "ad4004",
 	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
 	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4005_chip_info = {
 	.dev_name = "ad4005",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 16, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4006_chip_info = {
 	.dev_name = "ad4006",
 	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 0),
 	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4007_chip_info = {
 	.dev_name = "ad4007",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4008_chip_info = {
 	.dev_name = "ad4008",
 	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
 	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4010_chip_info = {
 	.dev_name = "ad4010",
 	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 0),
 	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 18, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4011_chip_info = {
 	.dev_name = "ad4011",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
+	.time_spec = &ad4000_t_spec,
 };
 
 static const struct ad4000_chip_info ad4020_chip_info = {
 	.dev_name = "ad4020",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 20, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 20, 1),
+	.time_spec = &ad4020_t_spec,
 };
 
 static const struct ad4000_chip_info ad4021_chip_info = {
 	.dev_name = "ad4021",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 20, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 20, 1),
+	.time_spec = &ad4020_t_spec,
 };
 
 static const struct ad4000_chip_info ad4022_chip_info = {
 	.dev_name = "ad4022",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 20, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 20, 1),
+	.time_spec = &ad4020_t_spec,
 };
 
 static const struct ad4000_chip_info adaq4001_chip_info = {
 	.dev_name = "adaq4001",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 16, 1),
+	.time_spec = &ad4000_t_spec,
 	.has_hardware_gain = true,
 };
 
@@ -224,6 +256,7 @@ static const struct ad4000_chip_info adaq4003_chip_info = {
 	.dev_name = "adaq4003",
 	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
 	.reg_access_chan_spec = AD4000_DIFF_CHANNELS('s', 18, 1),
+	.time_spec = &ad4000_t_spec,
 	.has_hardware_gain = true,
 };
 
@@ -238,6 +271,7 @@ struct ad4000_state {
 	bool span_comp;
 	u16 gain_milli;
 	int scale_tbl[AD4000_SCALE_OPTIONS][2];
+	const struct ad4000_time_spec *time_spec;
 
 	/*
 	 * DMA (thus cache coherency maintenance) requires the transfer buffers
@@ -502,16 +536,15 @@ static const struct iio_info ad4000_info = {
 static int ad4000_prepare_3wire_mode_message(struct ad4000_state *st,
 					     const struct iio_chan_spec *chan)
 {
-	unsigned int cnv_pulse_time = AD4000_TCONV_NS;
 	struct spi_transfer *xfers = st->xfers;
 
 	xfers[0].cs_change = 1;
-	xfers[0].cs_change_delay.value = cnv_pulse_time;
+	xfers[0].cs_change_delay.value = st->time_spec->t_conv_ns;
 	xfers[0].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;
 
 	xfers[1].rx_buf = &st->scan.data;
 	xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits);
-	xfers[1].delay.value = AD4000_TQUIET2_NS;
+	xfers[1].delay.value = st->time_spec->t_quiet2_ns;
 	xfers[1].delay.unit = SPI_DELAY_UNIT_NSECS;
 
 	spi_message_init_with_transfers(&st->msg, st->xfers, 2);
@@ -529,7 +562,6 @@ static int ad4000_prepare_3wire_mode_message(struct ad4000_state *st,
 static int ad4000_prepare_4wire_mode_message(struct ad4000_state *st,
 					     const struct iio_chan_spec *chan)
 {
-	unsigned int cnv_to_sdi_time = AD4000_TCONV_NS;
 	struct spi_transfer *xfers = st->xfers;
 
 	/*
@@ -537,7 +569,7 @@ static int ad4000_prepare_4wire_mode_message(struct ad4000_state *st,
 	 * going low.
 	 */
 	xfers[0].cs_off = 1;
-	xfers[0].delay.value = cnv_to_sdi_time;
+	xfers[0].delay.value = st->time_spec->t_conv_ns;
 	xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS;
 
 	xfers[1].rx_buf = &st->scan.data;
@@ -576,6 +608,7 @@ static int ad4000_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 	st->spi = spi;
+	st->time_spec = chip->time_spec;
 
 	ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(ad4000_power_supplies),
 					     ad4000_power_supplies);
Signature · 1 line
2.45.2
author maintainer
#5 lore raw

PATCH v4 4/4 iio: adc: ad4000: Add support for PulSAR devices

In reply to Marcelo Schmitt

The ADI PulSAR series of single-channel devices comprises differential and pseudo-differential ADCs that don't require any input data from the host controller. By not requiring a data input line, PulSAR devices can operate with a 3-wire only data bus in some setups.

The AD4000 series and the single-channel PulSAR series of devices have similar SPI transfer specifications and wiring configurations. Single-channel PulSAR devices are slower than AD4000 and don't have a configuration register. That taken into account, single-channel PulSARs can be supported by the ad4000 driver without any increase in code complexity.

Extend the AD4000 driver to also support single-channel PulSAR devices.

---
 drivers/iio/adc/ad4000.c | 162 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 162 insertions(+)
drivers/iio/adc/ad4000.c +162 -0
index c700d51b5637..74b8894d1a2a 100644
@@ -138,6 +138,48 @@ static const struct ad4000_time_spec ad4020_t_spec = {
 	.t_quiet2_ns = 60,
 };
 
+/* AD7983, AD7984 */
+static const struct ad4000_time_spec ad7983_t_spec = {
+	.t_conv_ns = 500,
+	.t_quiet2_ns = 0,
+};
+
+/* AD7980, AD7982 */
+static const struct ad4000_time_spec ad7980_t_spec = {
+	.t_conv_ns = 800,
+	.t_quiet2_ns = 0,
+};
+
+/* AD7946, AD7686, AD7688, AD7988-5, AD7693 */
+static const struct ad4000_time_spec ad7686_t_spec = {
+	.t_conv_ns = 1600,
+	.t_quiet2_ns = 0,
+};
+
+/* AD7690 */
+static const struct ad4000_time_spec ad7690_t_spec = {
+	.t_conv_ns = 2100,
+	.t_quiet2_ns = 0,
+};
+
+/* AD7942, AD7685, AD7687 */
+static const struct ad4000_time_spec ad7687_t_spec = {
+	.t_conv_ns = 3200,
+	.t_quiet2_ns = 0,
+};
+
+/* AD7691 */
+static const struct ad4000_time_spec ad7691_t_spec = {
+	.t_conv_ns = 3700,
+	.t_quiet2_ns = 0,
+};
+
+/* AD7988-1 */
+static const struct ad4000_time_spec ad7988_1_t_spec = {
+	.t_conv_ns = 9500,
+	.t_quiet2_ns = 0,
+};
+
 struct ad4000_chip_info {
 	const char *dev_name;
 	struct iio_chan_spec chan_spec[2];
@@ -260,6 +302,96 @@ static const struct ad4000_chip_info adaq4003_chip_info = {
 	.has_hardware_gain = true,
 };
 
+static const struct ad4000_chip_info ad7685_chip_info = {
+	.dev_name = "ad7685",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.time_spec = &ad7687_t_spec,
+};
+
+static const struct ad4000_chip_info ad7686_chip_info = {
+	.dev_name = "ad7686",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.time_spec = &ad7686_t_spec,
+};
+
+static const struct ad4000_chip_info ad7687_chip_info = {
+	.dev_name = "ad7687",
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
+	.time_spec = &ad7687_t_spec,
+};
+
+static const struct ad4000_chip_info ad7688_chip_info = {
+	.dev_name = "ad7688",
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
+	.time_spec = &ad7686_t_spec,
+};
+
+static const struct ad4000_chip_info ad7690_chip_info = {
+	.dev_name = "ad7690",
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.time_spec = &ad7690_t_spec,
+};
+
+static const struct ad4000_chip_info ad7691_chip_info = {
+	.dev_name = "ad7691",
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.time_spec = &ad7691_t_spec,
+};
+
+static const struct ad4000_chip_info ad7693_chip_info = {
+	.dev_name = "ad7693",
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 16, 0),
+	.time_spec = &ad7686_t_spec,
+};
+
+static const struct ad4000_chip_info ad7942_chip_info = {
+	.dev_name = "ad7942",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 14, 0),
+	.time_spec = &ad7687_t_spec,
+};
+
+static const struct ad4000_chip_info ad7946_chip_info = {
+	.dev_name = "ad7946",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 14, 0),
+	.time_spec = &ad7686_t_spec,
+};
+
+static const struct ad4000_chip_info ad7980_chip_info = {
+	.dev_name = "ad7980",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.time_spec = &ad7980_t_spec,
+};
+
+static const struct ad4000_chip_info ad7982_chip_info = {
+	.dev_name = "ad7982",
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.time_spec = &ad7980_t_spec,
+};
+
+static const struct ad4000_chip_info ad7983_chip_info = {
+	.dev_name = "ad7983",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.time_spec = &ad7983_t_spec,
+};
+
+static const struct ad4000_chip_info ad7984_chip_info = {
+	.dev_name = "ad7984",
+	.chan_spec = AD4000_DIFF_CHANNELS('s', 18, 0),
+	.time_spec = &ad7983_t_spec,
+};
+
+static const struct ad4000_chip_info ad7988_1_chip_info = {
+	.dev_name = "ad7988-1",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.time_spec = &ad7988_1_t_spec,
+};
+
+static const struct ad4000_chip_info ad7988_5_chip_info = {
+	.dev_name = "ad7988-5",
+	.chan_spec = AD4000_PSEUDO_DIFF_CHANNELS('u', 16, 0),
+	.time_spec = &ad7686_t_spec,
+};
+
 struct ad4000_state {
 	struct spi_device *spi;
 	struct gpio_desc *cnv_gpio;
@@ -733,6 +865,21 @@ static const struct spi_device_id ad4000_id[] = {
 	{ "ad4022", (kernel_ulong_t)&ad4022_chip_info },
 	{ "adaq4001", (kernel_ulong_t)&adaq4001_chip_info },
 	{ "adaq4003", (kernel_ulong_t)&adaq4003_chip_info },
+	{ "ad7685", (kernel_ulong_t)&ad7685_chip_info },
+	{ "ad7686", (kernel_ulong_t)&ad7686_chip_info },
+	{ "ad7687", (kernel_ulong_t)&ad7687_chip_info },
+	{ "ad7688", (kernel_ulong_t)&ad7688_chip_info },
+	{ "ad7690", (kernel_ulong_t)&ad7690_chip_info },
+	{ "ad7691", (kernel_ulong_t)&ad7691_chip_info },
+	{ "ad7693", (kernel_ulong_t)&ad7693_chip_info },
+	{ "ad7942", (kernel_ulong_t)&ad7942_chip_info },
+	{ "ad7946", (kernel_ulong_t)&ad7946_chip_info },
+	{ "ad7980", (kernel_ulong_t)&ad7980_chip_info },
+	{ "ad7982", (kernel_ulong_t)&ad7982_chip_info },
+	{ "ad7983", (kernel_ulong_t)&ad7983_chip_info },
+	{ "ad7984", (kernel_ulong_t)&ad7984_chip_info },
+	{ "ad7988-1", (kernel_ulong_t)&ad7988_1_chip_info },
+	{ "ad7988-5", (kernel_ulong_t)&ad7988_5_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, ad4000_id);
@@ -754,6 +901,21 @@ static const struct of_device_id ad4000_of_match[] = {
 	{ .compatible = "adi,ad4022", .data = &ad4022_chip_info },
 	{ .compatible = "adi,adaq4001", .data = &adaq4001_chip_info },
 	{ .compatible = "adi,adaq4003", .data = &adaq4003_chip_info },
+	{ .compatible = "adi,ad7685", .data = &ad7685_chip_info },
+	{ .compatible = "adi,ad7686", .data = &ad7686_chip_info },
+	{ .compatible = "adi,ad7687", .data = &ad7687_chip_info },
+	{ .compatible = "adi,ad7688", .data = &ad7688_chip_info },
+	{ .compatible = "adi,ad7690", .data = &ad7690_chip_info },
+	{ .compatible = "adi,ad7691", .data = &ad7691_chip_info },
+	{ .compatible = "adi,ad7693", .data = &ad7693_chip_info },
+	{ .compatible = "adi,ad7942", .data = &ad7942_chip_info },
+	{ .compatible = "adi,ad7946", .data = &ad7946_chip_info },
+	{ .compatible = "adi,ad7980", .data = &ad7980_chip_info },
+	{ .compatible = "adi,ad7982", .data = &ad7982_chip_info },
+	{ .compatible = "adi,ad7983", .data = &ad7983_chip_info },
+	{ .compatible = "adi,ad7984", .data = &ad7984_chip_info },
+	{ .compatible = "adi,ad7988-1", .data = &ad7988_1_chip_info },
+	{ .compatible = "adi,ad7988-5", .data = &ad7988_5_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ad4000_of_match);
Signature · 1 line
2.45.2

Marcelo Schmitt

author maintainer
#0 lore raw

v4 cover Timestamp and PulSAR support for ad4000

Complement the ad4000 driver with a timestamp channel, a minor adjust in transfer timing, and support for single-channel PulSAR devices.

Change log v3 -> v4
[IIO]
- No changes.
[Device tree]
- Sorted compatible strings in alphabetical order.
- Left only fallback compatibles in allOf check list for adi,sdi-pin property.
- Improved patch description with explanation about how the AD4000 and PulSAR devices are different.

Change log v2 -> v3
[IIO]
- Reverted to direct assignment of ad4000_time_spec structs. [Device tree]
- No changes.

Change log v1 -> v2
- Added Suggested-by and Reviewed-by tags.
[IIO]
- Commented the removal of unused AD4000_TQUIET1_NS define in commit body.
- Made a common macro to assign ad4000_time_spec.
- Explicitly initialized PulSAR t_quiet2_ns with 0 as those don't need any quiet time.
- Improved PulSAR support commit description with more context.
- Dropped support for AD7694.
[Device tree]
- Made "cs" the default adi,sdi-pin value for PulSAR devices.

Link to v3: https://lore.kernel.org/linux-iio/[email protected]/
Link to v2: https://lore.kernel.org/linux-iio/[email protected]/
Link to v1: https://lore.kernel.org/linux-iio/[email protected]/

Marcelo Schmitt (4):
dt-bindings: iio: adc: adi,ad4000: Add PulSAR
iio: adc: ad4000: Add timestamp channel
iio: adc: ad4000: Use device specific timing for SPI transfers
iio: adc: ad4000: Add support for PulSAR devices

 .../bindings/iio/adc/adi,ad4000.yaml          |  56 ++++
 drivers/iio/adc/ad4000.c                      | 311 +++++++++++++++---
 2 files changed, 316 insertions(+), 51 deletions(-)

base-commit: 9dd2270ca0b38ee16094817f4a53e7ba78e31567

Signature · 1 line
2.45.2
#2 lore raw

Re: [PATCH v4 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR

In reply to Marcelo Schmitt
Quoted 53 lines · Marcelo Schmitt

Extend the AD4000 series device tree documentation to also describe PulSAR devices.

The single-channel series of PulSAR devices is similar to the AD4000 series except PulSAR devices sample at slower rates and don't have a configuration register. Because PulSAR devices don't have a configuration register, they don't support all features of AD4000 devices and thus fewer interfaces are provided to user space. Also, while AD4000 may have their SDI pin connected to SPI host MOSI line, PulSAR SDI pin is never connected to MOSI.

Some devices within the PulSAR series are just faster versions of others.

Quoted 1 line

From fastest to slowest, AD7980, AD7988-5, AD7686, AD7685, and AD7988-1 are

all 16-bit pseudo-differential pin-for-pin compatible ADCs. Devices that only vary on the sample rate are documented with a common fallback compatible.

---
Change log v3 -> v4
- Sorted compatible strings in alphabetical order.
- Left only fallback compatibles in allOf check list for adi,sdi-pin property.
- Improved patch description with explanation about how the AD4000 and PulSAR devices are different.

Well, I didn't manage to get a dtbs_check message for all the cases I was expecting to cover, yet. I trust the test done by maintainers while I don't figure out what's wrong with my setup.

FWIW, here's what I tried:

Cloned dt-binding tree from git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
Fetched and checked out dt/next branch.
Applied AD4000/PulSAR patches.
- <62dd96ac9cd> ("iio: adc: ad4000: fix reading unsigned data")
- <8ebfd0925521> ("iio: adc: ad4000: Check for error code from devm_mutex_init() call")
- the patches from this patch series

Cloned dtc from git://git.kernel.org/pub/scm/utils/dtc/dtc.git into a directory at the same level of linux kernel source dir.

Cloned dt-schema from https://github.com/devicetree-org/dt-schema.git into a directory at the same level of linux kernel source dir.
Within dt-schema,
mkdir venv
python3 -m venv venv/
source venv/bin/activate
python3 -m ensurepip --default-pip
python3 -m pip install --upgrade pip setuptools wheel
pip install yamllint
pip install dtschema --upgrade
pip install -e .

Quoted 9 lines

export ARCH=arm; export CROSS_COMPILE=arm-linux-gnueabi-
Ran ./scripts/dtc/update-dtc-source.sh from the top level of Linux source tree.
make defconfig
Added zynq-coraz7s-ad7685.dts to arch/arm/boot/dts/xilinx/.
Added zynq-coraz7s-ad7685.dtb to arch/arm/boot/dts/xilinx/Makefile.
make -j4 dtbs_check # but it didn't print anything about adi,sdi-pin value.
Changed the compatible from "adi,ad7685" to "adi,ad7687" and dtbs_check prints arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7685.dtb: adc@0: adi,sdi-pin:0: 'sdi' is not one of ['high', 'low', 'cs']

Your process is weird. None of these are needed, especially dtc, except pip install yamllint and dtschema. Installing dtc suggests you are working on some old kernel and that's a mistake on its own. Plaese work on latest mainline / maintainer / next tree.

Quoted 81 lines

-zynq-coraz7s-ad7685.dts file {
// SPDX-License-Identifier: GPL-2.0

/dts-v1/;
#include "zynq-7000.dtsi"

/ {
	adc_vref: regulator-vref {
		compatible = "regulator-fixed";
		regulator-name = "EVAL 5V Vref";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};

	adc_vdd: regulator-vdd {
		compatible = "regulator-fixed";
		regulator-name = "Eval VDD supply";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};

	adc_vio: regulator-vio {
		compatible = "regulator-fixed";
		regulator-name = "Eval VIO supply";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};
};
&spi0 {
	adc@0 {
		compatible = "adi,ad7685";
		reg = <0>;
		spi-max-frequency = <40000000>;
		vdd-supply = <&adc_vdd>;
		vio-supply = <&adc_vio>;
		ref-supply = <&adc_vref>;
		adi,sdi-pin = "sdi";
	};
};
(quoted diff) +0 -1
-} zynq-coraz7s-ad7685.dts file
 
 .../bindings/iio/adc/adi,ad4000.yaml          | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml +18 -0
index e413a9d8d2a2..3c1171c7f0e1 100644
@@ -19,6 +19,20 @@ description: |
     https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf
 
 $ref: /schemas/spi/spi-peripheral-props.yaml#
 
@@ -63,6 +77,32 @@ properties:
 
       - const: adi,adaq4003
 
+      - items:
+          - enum:
+              - adi,ad7685
+              - adi,ad7686

Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml properties: · line 93

Quoted 10 lines
Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml +10 -0
+              - adi,ad7980
+              - adi,ad7988-1
+              - adi,ad7988-5
+          - const: adi,ad7983
+
+      - items:
+          - enum:
+              - adi,ad7688
+              - adi,ad7693
+          - const: adi,ad7687

I don't see where you allow adi,ad7687 alone. Same problem with other cases.

Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml properties: · line 100

Quoted 7 lines
Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml +7 -0
+
+      - items:
+          - enum:
+              - adi,ad7690
+              - adi,ad7982
+              - adi,ad7984
+          - const: adi,ad7691

Best regards,
Krzysztof