xfs_io: enable extsize and stat -v support for ext4
cover xfs_io: enable extsize and stat -v support for ext4
Changes since rfc [1]
* Patch 1: Don't add ext4 specific checks
* Patch 2: Rather than adding a check for ext4, allow FS_IOC_GETXATTR to be called by any FS that supports it.
[1]
https://lore.kernel.org/linux-ext4/[email protected]/T/#t
** Original Cover **
With ext4 extsize hints support being worked on, enable extsize command to be run on FSes other than xfs so ext4 can utilize it. Also extend stat -v to perform FS_IOC_FSGETXATTR ioctl on ext4.
No funtional changes are intended for XFS.
Ojaswin Mujoo (3):
include/linux.h: use linux/magic.h to get XFS_SUPER_MAGIC
xfs_io: allow foreign FSes to show FS_IOC_FSGETXATTR details
xfs_io: add extsize command support
include/linux.h | 3 ++- io/open.c | 2 +- io/stat.c | 63 ++++++++++++++++++++++++++++--------------------- 3 files changed, 39 insertions(+), 29 deletions(-)
Signature · 1 line
2.43.5
PATCH 1/3 include/linux.h: use linux/magic.h to get XFS_SUPER_MAGIC
This avoids open coding the magic number
--- include/linux.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux.h +2 -1
@@ -37,6 +37,7 @@#endif #include <unistd.h> #include <assert.h> +#include <linux/magic.h> /* super block magic numbers */ static __inline__int xfsctl (const char *path,int fd,int cmd,void *p) {
@@ -60,7 +61,7 @@ static __inline__ int platform_test_xfs_fd(int fd)return 0 ;if (!S_ISREG (statbuf.st_mode) && !S_ISDIR (statbuf.st_mode))return 0 ; -return (statfsbuf.f_type ==0x58465342 );/* XFSB */ +return (statfsbuf.f_type ==XFS_SUPER_MAGIC ); }static __inline__int platform_test_xfs_path (const char *path)
Signature · 1 line
2.43.5
Re: [PATCH 1/3] include/linux.h: use linux/magic.h to get XFS_SUPER_MAGIC
include/linux.h static __inline__ int platform_test_xfs_fd(int fd) · line 64
Quoted 2 lines · Ojaswin Mujoo
include/linux.h +1
-1-return (statfsbuf.f_type ==0x58465342 );/* XFSB */ +return (statfsbuf.f_type ==XFS_SUPER_MAGIC );
Might be worth dropping the superfluous braces here while you're at it.
Otherwise looks good:
Re: [PATCH 1/3] include/linux.h: use linux/magic.h to get XFS_SUPER_MAGIC
Quoted 5 lines · Christoph Hellwig
include/linux.h static __inline__ int platform_test_xfs_fd(int fd) · line 64
Quoted 2 lines · Ojaswin Mujoo
include/linux.h +1
-1-return (statfsbuf.f_type ==0x58465342 );/* XFSB */ +return (statfsbuf.f_type ==XFS_SUPER_MAGIC );Might be worth dropping the superfluous braces here while you're at it.
Thanks for the review Christoph, I will fix the braces here.
regards,
ojaswin
Quoted 5 lines
Otherwise looks good:
Reviewed-by Christoph Hellwig <[email protected]>
PATCH 2/3 xfs_io: allow foreign FSes to show FS_IOC_FSGETXATTR details
In reply to Ojaswin MujooCurrently with stat we only show FS_IOC_FSGETXATTR details if the filesystem is XFS. With extsize support also coming to ext4 and possibly other filesystems, make sure to allow foreign FSes to display these details when "stat" or "statx" is used.
(Thanks to Dave for suggesting implementation of print_extended_info())
--- io/stat.c | 63 +++++++++++++++++++++++++++++++------------------------ 1 file changed, 36 insertions(+), 27 deletions(-)
io/stat.c +36 -27
@@ -98,30 +98,45 @@ print_file_info(void) }static void -print_xfs_info (int verbose) +print_extended_info (int verbose) { -struct dioattr dio; -struct fsxattr fsx, fsxa; - -if ((xfsctl (file->name, file->fd,FS_IOC_FSGETXATTR , &fsx)) <0 || - (xfsctl (file->name, file->fd,XFS_IOC_FSGETXATTRA , &fsxa)) <0 ) { -perror ("FS_IOC_FSGETXATTR" ); - }else { -printf (_ ("fsxattr.xflags = 0x%x " ), fsx.fsx_xflags); -printxattr (fsx.fsx_xflags, verbose,0 , file->name,1 ,1 ); -printf (_ ("fsxattr.projid = %u\n" ), fsx.fsx_projid); -printf (_ ("fsxattr.extsize = %u\n" ), fsx.fsx_extsize); -printf (_ ("fsxattr.cowextsize = %u\n" ), fsx.fsx_cowextsize); -printf (_ ("fsxattr.nextents = %u\n" ), fsx.fsx_nextents); -printf (_ ("fsxattr.naextents = %u\n" ), fsxa.fsx_nextents); +struct dioattr dio = {}; +struct fsxattr fsx = {}, fsxa = {}; + +if ((ioctl (file->fd,FS_IOC_FSGETXATTR , &fsx)) <0 ) { +perror ("FS_IOC_GETXATTR" ); + exitcode =1 ; +return ; } + +printf (_ ("fsxattr.xflags = 0x%x " ), fsx.fsx_xflags); +printxattr (fsx.fsx_xflags, verbose,0 , file->name,1 ,1 ); +printf (_ ("fsxattr.projid = %u\n" ), fsx.fsx_projid); +printf (_ ("fsxattr.extsize = %u\n" ), fsx.fsx_extsize); +printf (_ ("fsxattr.cowextsize = %u\n" ), fsx.fsx_cowextsize); +printf (_ ("fsxattr.nextents = %u\n" ), fsx.fsx_nextents); + +/* Only XFS supports FS_IOC_FSGETXATTRA and XFS_IOC_DIOINFO */ +if (file->flags &IO_FOREIGN ) +return ; + +if ((ioctl (file->fd,XFS_IOC_FSGETXATTRA , &fsxa)) <0 ) { +perror ("XFS_IOC_GETXATTRA" ); + exitcode =1 ; +return ; + } + +printf (_ ("fsxattr.naextents = %u\n" ), fsxa.fsx_nextents); +if ((xfsctl (file->name, file->fd,XFS_IOC_DIOINFO , &dio)) <0 ) {perror ("XFS_IOC_DIOINFO" ); - }else { -printf (_ ("dioattr.mem = 0x%x\n" ), dio.d_mem); -printf (_ ("dioattr.miniosz = %u\n" ), dio.d_miniosz); -printf (_ ("dioattr.maxiosz = %u\n" ), dio.d_maxiosz); + exitcode =1 ; +return ; } + +printf (_ ("dioattr.mem = 0x%x\n" ), dio.d_mem); +printf (_ ("dioattr.miniosz = %u\n" ), dio.d_miniosz); +printf (_ ("dioattr.maxiosz = %u\n" ), dio.d_maxiosz); }int
@@ -167,10 +182,7 @@ stat_f(printf (_ ("stat.ctime = %s" ),ctime (&st.st_ctime)); } -if (file->flags &IO_FOREIGN ) -return 0 ; - -print_xfs_info (verbose); +print_extended_info (verbose);return 0 ; }
@@ -440,10 +452,7 @@ statx_f( ctime((time_t *)&stx.stx_btime.tv_sec)); } -if (file->flags &IO_FOREIGN ) -return 0 ; - -print_xfs_info (verbose); +print_extended_info (verbose);return 0 ; }
Signature · 1 line
2.43.5
PATCH 3/3 xfs_io: add extsize command support
In reply to Ojaswin Mujooextsize command is currently only supported with XFS filesystem. Lift this restriction now that ext4 is also supporting extsize hints.
--- io/open.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
io/open.c +1 -1
@@ -997,7 +997,7 @@ open_init(void) extsize_cmd.args =_ ("[-D | -R] [extsize]" ); extsize_cmd.argmin =0 ; extsize_cmd.argmax =-1 ; - extsize_cmd.flags =CMD_NOMAP_OK ; + extsize_cmd.flags =CMD_NOMAP_OK |CMD_FOREIGN_OK ; extsize_cmd.oneline =_ ("get/set preferred extent size (in bytes) for the open file" ); extsize_cmd.help = extsize_help;
Signature · 1 line
2.43.5