Skip to contentSkip to conversation

bpf: skip non exist keys in generic_map_lookup_batch

PATCH Applied Yan Zhai 4 participants 8 messages Feb 10, 2025 – Feb 19, 2025

Subsystems (4)
lore
Share & tools
lore

Yan Zhai

author
#0 lore raw

v3 cover bpf: skip non exist keys in generic_map_lookup_batch

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors.

This patch fixes this behavior by skipping the non-existing key, and does not return EINTR any more.

V2->V3: deleted a unused macro
V1->V2: split the fix and selftests; fixed a few selftests issues.

V2: https://lore.kernel.org/bpf/[email protected]/
V1: https://lore.kernel.org/bpf/[email protected]/

Yan Zhai (2):
bpf: skip non exist keys in generic_map_lookup_batch
selftests: bpf: test batch lookup on array of maps with holes

 kernel/bpf/syscall.c                          | 18 ++----
 .../bpf/map_tests/map_in_map_batch_ops.c      | 62 +++++++++++++------
 2 files changed, 49 insertions(+), 31 deletions(-)
Signature · 1 line
2.39.5
author
#1 lore raw

PATCH v3 1/2 bpf: skip non exist keys in generic_map_lookup_batch

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors.

Rather, do not retry in generic_map_lookup_batch. If it finds a non existing element, skip to the next key. This simple solution comes with a price that transient errors may not be recovered, and the iteration might cycle back to the first key under parallel deletion. For example, Hou Tao <[email protected]> pointed out a following scenario:

For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key

(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.

(3) goto next_key
It swaps the prev_key and key

(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just like prev_key=NULL case, the returned key will be duplicated.

With the retry logic, the iteration can continue to the key next to the deleted one. But if we directly skip to the next key, the iteration loop would restart from the first key for the lpm_trie type.

However, not all races may be recovered. For example, if current key is deleted after instead of before bpf_map_copy_value, or if the prev_key also gets deleted, then the loop will still restart from the first key for lpm_tire anyway. For generic lookup it might be better to stay simple, i.e. just skip to the next key. To guarantee that the output keys are not duplicated, it is better to implement map type specific batch operations, which can properly lock the trie and synchronize with concurrent mutators.

Fixes cb4d03ab499d ("bpf: Add generic support for lookup batch op")

---
v2->v3: deleted a used macro
v1->v2: incorporate more useful information inside commit message.

---
 kernel/bpf/syscall.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)
kernel/bpf/syscall.c +5 -13
index c420edbfb7c8..e5f1c7fd0ba7 100644
@@ -1968,8 +1968,6 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	return err;
 }
 
-#define MAP_LOOKUP_RETRIES 3
-
 int generic_map_lookup_batch(struct bpf_map *map,
 				    const union bpf_attr *attr,
 				    union bpf_attr __user *uattr)
@@ -1979,8 +1977,8 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	void __user *values = u64_to_user_ptr(attr->batch.values);
 	void __user *keys = u64_to_user_ptr(attr->batch.keys);
 	void *buf, *buf_prevkey, *prev_key, *key, *value;
-	int err, retry = MAP_LOOKUP_RETRIES;
 	u32 value_size, cp, max_count;
+	int err;
 
 	if (attr->batch.elem_flags & ~BPF_F_LOCK)
 		return -EINVAL;
@@ -2026,14 +2024,8 @@ int generic_map_lookup_batch(struct bpf_map *map,
 		err = bpf_map_copy_value(map, key, value,
 					 attr->batch.elem_flags);
 
-		if (err == -ENOENT) {
-			if (retry) {
-				retry--;
-				continue;
-			}
-			err = -EINTR;
-			break;
-		}
+		if (err == -ENOENT)
+			goto next_key;
 
 		if (err)
 			goto free_buf;
@@ -2048,12 +2040,12 @@ int generic_map_lookup_batch(struct bpf_map *map,
 			goto free_buf;
 		}
 
+		cp++;
+next_key:
 		if (!prev_key)
 			prev_key = buf_prevkey;
 
 		swap(prev_key, key);
-		retry = MAP_LOOKUP_RETRIES;
-		cp++;
 		cond_resched();
 	}
 
Signature · 1 line
2.39.5
#2 lore raw
Quoted 9 lines · Yan Zhai

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors.

Quoted 4 lines

Rather, do not retry in generic_map_lookup_batch. If it finds a non existing element, skip to the next key. This simple solution comes with a price that transient errors may not be recovered, and the iteration might cycle back to the first key under parallel deletion. For example,

probably stupid question, but why not keep the retry logic and when it fails then instead of returning EINTR just jump to the next key

jirka

Quoted 98 lines

Hou Tao <[email protected]> pointed out a following scenario:

For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key

(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.

(3) goto next_key
It swaps the prev_key and key

(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just like prev_key=NULL case, the returned key will be duplicated.

With the retry logic, the iteration can continue to the key next to the deleted one. But if we directly skip to the next key, the iteration loop would restart from the first key for the lpm_trie type.

However, not all races may be recovered. For example, if current key is deleted after instead of before bpf_map_copy_value, or if the prev_key also gets deleted, then the loop will still restart from the first key for lpm_tire anyway. For generic lookup it might be better to stay simple, i.e. just skip to the next key. To guarantee that the output keys are not duplicated, it is better to implement map type specific batch operations, which can properly lock the trie and synchronize with concurrent mutators.

Fixes cb4d03ab499d ("bpf: Add generic support for lookup batch op")

---
v2->v3: deleted a used macro
v1->v2: incorporate more useful information inside commit message.

---
 kernel/bpf/syscall.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)
kernel/bpf/syscall.c +5 -13
index c420edbfb7c8..e5f1c7fd0ba7 100644
@@ -1968,8 +1968,6 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	return err;
 }
 
-#define MAP_LOOKUP_RETRIES 3
-
 int generic_map_lookup_batch(struct bpf_map *map,
 				    const union bpf_attr *attr,
 				    union bpf_attr __user *uattr)
@@ -1979,8 +1977,8 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	void __user *values = u64_to_user_ptr(attr->batch.values);
 	void __user *keys = u64_to_user_ptr(attr->batch.keys);
 	void *buf, *buf_prevkey, *prev_key, *key, *value;
-	int err, retry = MAP_LOOKUP_RETRIES;
 	u32 value_size, cp, max_count;
+	int err;
 
 	if (attr->batch.elem_flags & ~BPF_F_LOCK)
 		return -EINVAL;
@@ -2026,14 +2024,8 @@ int generic_map_lookup_batch(struct bpf_map *map,
 		err = bpf_map_copy_value(map, key, value,
 					 attr->batch.elem_flags);
 
-		if (err == -ENOENT) {
-			if (retry) {
-				retry--;
-				continue;
-			}
-			err = -EINTR;
-			break;
-		}
+		if (err == -ENOENT)
+			goto next_key;
 
 		if (err)
 			goto free_buf;
@@ -2048,12 +2040,12 @@ int generic_map_lookup_batch(struct bpf_map *map,
 			goto free_buf;
 		}
 
+		cp++;
+next_key:
 		if (!prev_key)
 			prev_key = buf_prevkey;
 
 		swap(prev_key, key);
-		retry = MAP_LOOKUP_RETRIES;
-		cp++;
 		cond_resched();
 	}
 
Signature · 1 line
2.39.5
#3 lore raw
Quoted 16 lines · Jiri Olsa
Quoted 9 lines · Yan Zhai

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors.

Quoted 4 lines

Rather, do not retry in generic_map_lookup_batch. If it finds a non existing element, skip to the next key. This simple solution comes with a price that transient errors may not be recovered, and the iteration might cycle back to the first key under parallel deletion. For example,

Quoted 4 lines

probably stupid question, but why not keep the retry logic and when it fails then instead of returning EINTR just jump to the next key

jirka

+1, keeping the retry logic but moving to the next key on error sounds like a sensible approach.

Quoted 100 lines
Quoted 100 lines

Hou Tao <[email protected]> pointed out a following scenario:

For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key

(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.

(3) goto next_key
It swaps the prev_key and key

(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just like prev_key=NULL case, the returned key will be duplicated.

With the retry logic, the iteration can continue to the key next to the deleted one. But if we directly skip to the next key, the iteration loop would restart from the first key for the lpm_trie type.

However, not all races may be recovered. For example, if current key is deleted after instead of before bpf_map_copy_value, or if the prev_key also gets deleted, then the loop will still restart from the first key for lpm_tire anyway. For generic lookup it might be better to stay simple, i.e. just skip to the next key. To guarantee that the output keys are not duplicated, it is better to implement map type specific batch operations, which can properly lock the trie and synchronize with concurrent mutators.

Fixes cb4d03ab499d ("bpf: Add generic support for lookup batch op")

---
v2->v3: deleted a used macro
v1->v2: incorporate more useful information inside commit message.

---
 kernel/bpf/syscall.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)
kernel/bpf/syscall.c +5 -14
index c420edbfb7c8..e5f1c7fd0ba7 100644
@@ -1968,8 +1968,6 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
      return err;
 }
 
-#define MAP_LOOKUP_RETRIES 3
-
 int generic_map_lookup_batch(struct bpf_map *map,
                                  const union bpf_attr *attr,
                                  union bpf_attr __user *uattr)
@@ -1979,8 +1977,8 @@ int generic_map_lookup_batch(struct bpf_map *map,
      void __user *values = u64_to_user_ptr(attr->batch.values);
      void __user *keys = u64_to_user_ptr(attr->batch.keys);
      void *buf, *buf_prevkey, *prev_key, *key, *value;
-     int err, retry = MAP_LOOKUP_RETRIES;
      u32 value_size, cp, max_count;
+     int err;
 
      if (attr->batch.elem_flags & ~BPF_F_LOCK)
              return -EINVAL;
@@ -2026,14 +2024,8 @@ int generic_map_lookup_batch(struct bpf_map *map,
              err = bpf_map_copy_value(map, key, value,
                                       attr->batch.elem_flags);
 
-             if (err == -ENOENT) {
-                     if (retry) {
-                             retry--;
-                             continue;
-                     }
-                     err = -EINTR;
-                     break;
-             }
+             if (err == -ENOENT)
+                     goto next_key;
 
              if (err)
                      goto free_buf;
@@ -2048,12 +2040,12 @@ int generic_map_lookup_batch(struct bpf_map *map,
                      goto free_buf;
              }
 
+             cp++;
+next_key:
              if (!prev_key)
                      prev_key = buf_prevkey;
 
              swap(prev_key, key);
-             retry = MAP_LOOKUP_RETRIES;
-             cp++;
              cond_resched();
      }
 
--

2.39.5

author
#4 lore raw

Hi Brian, Jiri

thanks for the comments.

Quoted 18 lines · Brian Vazquez
Quoted 16 lines · Jiri Olsa
Quoted 13 lines · Yan Zhai

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors.

Rather, do not retry in generic_map_lookup_batch. If it finds a non existing element, skip to the next key. This simple solution comes with a price that transient errors may not be recovered, and the iteration might cycle back to the first key under parallel deletion. For example,

Quoted 8 lines
Quoted 4 lines

probably stupid question, but why not keep the retry logic and when it fails then instead of returning EINTR just jump to the next key

jirka

+1, keeping the retry logic but moving to the next key on error sounds like a sensible approach.

I made the trade off since retry would consistently fail for the array of maps, so it is merely wasting cycles to ever do so. It is already pretty slow to read these maps today from userspace (for us we read them for accounting/monitoring purposes), so it is nice to save a few cycles especially for sparse maps. E.g. We use inner maps to store protocol specific actions in an array of maps with 256 slots, but usually only a few common protocols like TCP/UDP/ICMP are populated, leaving most "holes". On the other hand, I personally feel it is really "fragile" if users rely heavily on this logic to survive concurrent lookup and deletion. Would it make more sense to provide concurrency guarantee with map specific ops like hash map?

best
Yan

#5 lore raw
Quoted 31 lines · Yan Zhai

Hi Brian, Jiri

thanks for the comments.

Quoted 18 lines · Brian Vazquez
Quoted 16 lines · Jiri Olsa
Quoted 13 lines · Yan Zhai

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors.

Rather, do not retry in generic_map_lookup_batch. If it finds a non existing element, skip to the next key. This simple solution comes with a price that transient errors may not be recovered, and the iteration might cycle back to the first key under parallel deletion. For example,

Quoted 8 lines
Quoted 4 lines

probably stupid question, but why not keep the retry logic and when it fails then instead of returning EINTR just jump to the next key

jirka

+1, keeping the retry logic but moving to the next key on error sounds like a sensible approach.

Quoted 11 lines

I made the trade off since retry would consistently fail for the array of maps, so it is merely wasting cycles to ever do so. It is already pretty slow to read these maps today from userspace (for us we read them for accounting/monitoring purposes), so it is nice to save a few cycles especially for sparse maps. E.g. We use inner maps to store protocol specific actions in an array of maps with 256 slots, but usually only a few common protocols like TCP/UDP/ICMP are populated, leaving most "holes". On the other hand, I personally feel it is really "fragile" if users rely heavily on this logic to survive concurrent lookup and deletion. Would it make more sense to provide concurrency guarantee with map specific ops like hash map?

Brian, any details on the EINTR path? is that just to survive concurent batch-lookup and delete?

if that's important use case I guess the map specific function would be possible, because it's broken for maps with holes as you described

thanks,
jirka

author
#6 lore raw

PATCH v3 2/2 selftests: bpf: test batch lookup on array of maps with holes

In reply to Yan Zhai

Iterating through array of maps may encounter non existing keys. The batch operation should not fail on when this happens.

---
 .../bpf/map_tests/map_in_map_batch_ops.c      | 62 +++++++++++++------
 1 file changed, 44 insertions(+), 18 deletions(-)
tools/testing/selftests/bpf/map_tests/map_in_map_batch_ops.c +44 -18
index 66191ae9863c..79c3ccadb962 100644
@@ -120,11 +120,12 @@ static void validate_fetch_results(int outer_map_fd,
 
 static void fetch_and_validate(int outer_map_fd,
 			       struct bpf_map_batch_opts *opts,
-			       __u32 batch_size, bool delete_entries)
+			       __u32 batch_size, bool delete_entries,
+			       bool has_holes)
 {
-	__u32 *fetched_keys, *fetched_values, total_fetched = 0;
-	__u32 batch_key = 0, fetch_count, step_size;
-	int err, max_entries = OUTER_MAP_ENTRIES;
+	int err, max_entries = OUTER_MAP_ENTRIES - !!has_holes;
+	__u32 *fetched_keys, *fetched_values, total_fetched = 0, i;
+	__u32 batch_key = 0, fetch_count, step_size = batch_size;
 	__u32 value_size = sizeof(__u32);
 
 	/* Total entries needs to be fetched */
@@ -134,9 +135,8 @@ static void fetch_and_validate(int outer_map_fd,
 	      "Memory allocation failed for fetched_keys or fetched_values",
 	      "error=%s\n", strerror(errno));
 
-	for (step_size = batch_size;
-	     step_size <= max_entries;
-	     step_size += batch_size) {
+	/* hash map may not always return full batch */
+	for (i = 0; i < OUTER_MAP_ENTRIES; i++) {
 		fetch_count = step_size;
 		err = delete_entries
 		      ? bpf_map_lookup_and_delete_batch(outer_map_fd,
@@ -155,6 +155,7 @@ static void fetch_and_validate(int outer_map_fd,
 		if (err && errno == ENOSPC) {
 			/* Fetch again with higher batch size */
 			total_fetched = 0;
+			step_size += batch_size;
 			continue;
 		}
 
@@ -184,18 +185,19 @@ static void fetch_and_validate(int outer_map_fd,
 }
 
 static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type,
-				  enum bpf_map_type inner_map_type)
+				  enum bpf_map_type inner_map_type,
+				  bool has_holes)
 {
+	__u32 max_entries = OUTER_MAP_ENTRIES - !!has_holes;
 	__u32 *outer_map_keys, *inner_map_fds;
-	__u32 max_entries = OUTER_MAP_ENTRIES;
 	LIBBPF_OPTS(bpf_map_batch_opts, opts);
 	__u32 value_size = sizeof(__u32);
 	int batch_size[2] = {5, 10};
 	__u32 map_index, op_index;
 	int outer_map_fd, ret;
 
-	outer_map_keys = calloc(max_entries, value_size);
-	inner_map_fds = calloc(max_entries, value_size);
+	outer_map_keys = calloc(OUTER_MAP_ENTRIES, value_size);
+	inner_map_fds = calloc(OUTER_MAP_ENTRIES, value_size);
 	CHECK((!outer_map_keys || !inner_map_fds),
 	      "Memory allocation failed for outer_map_keys or inner_map_fds",
 	      "error=%s\n", strerror(errno));
@@ -209,6 +211,24 @@ static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type,
 			((outer_map_type == BPF_MAP_TYPE_ARRAY_OF_MAPS)
 			 ? 9 : 1000) - map_index;
 
+	/* This condition is only meaningful for array of maps.
+	 *
+	 * max_entries == OUTER_MAP_ENTRIES - 1 if it is true. Say
+	 * max_entries is short for n, then outer_map_keys looks like:
+	 *
+	 *   [n, n-1, ... 2, 1]
+	 *
+	 * We change it to
+	 *
+	 *   [n, n-1, ... 2, 0]
+	 *
+	 * So it will leave key 1 as a hole. It will serve to test the
+	 * correctness when batch on an array: a "non-exist" key might be
+	 * actually allocated and returned from key iteration.
+	 */
+	if (has_holes)
+		outer_map_keys[max_entries - 1]--;
+
 	/* batch operation - map_update */
 	ret = bpf_map_update_batch(outer_map_fd, outer_map_keys,
 				   inner_map_fds, &max_entries, &opts);
@@ -219,15 +239,17 @@ static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type,
 	/* batch operation - map_lookup */
 	for (op_index = 0; op_index < 2; ++op_index)
 		fetch_and_validate(outer_map_fd, &opts,
-				   batch_size[op_index], false);
+				   batch_size[op_index], false,
+				   has_holes);
 
 	/* batch operation - map_lookup_delete */
 	if (outer_map_type == BPF_MAP_TYPE_HASH_OF_MAPS)
 		fetch_and_validate(outer_map_fd, &opts,
-				   max_entries, true /*delete*/);
+				   max_entries, true /*delete*/,
+				   has_holes);
 
 	/* close all map fds */
-	for (map_index = 0; map_index < max_entries; map_index++)
+	for (map_index = 0; map_index < OUTER_MAP_ENTRIES; map_index++)
 		close(inner_map_fds[map_index]);
 	close(outer_map_fd);
 
@@ -237,16 +259,20 @@ static void _map_in_map_batch_ops(enum bpf_map_type outer_map_type,
 
 void test_map_in_map_batch_ops_array(void)
 {
-	_map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_ARRAY);
+	_map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_ARRAY, false);
 	printf("%s:PASS with inner ARRAY map\n", __func__);
-	_map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH);
+	_map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH, false);
 	printf("%s:PASS with inner HASH map\n", __func__);
+	_map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_ARRAY, true);
+	printf("%s:PASS with inner ARRAY map with holes\n", __func__);
+	_map_in_map_batch_ops(BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH, true);
+	printf("%s:PASS with inner HASH map with holes\n", __func__);
 }
 
 void test_map_in_map_batch_ops_hash(void)
 {
-	_map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_ARRAY);
+	_map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_ARRAY, false);
 	printf("%s:PASS with inner ARRAY map\n", __func__);
-	_map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_HASH);
+	_map_in_map_batch_ops(BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_HASH, false);
 	printf("%s:PASS with inner HASH map\n", __func__);
 }
Signature · 1 line
2.39.5
#7 lore raw
In reply to Yan Zhai
This series was applied to bpf/bpf.git (master) by Alexei Starovoitov <[email protected]>:

Hello:

This series was applied to bpf/bpf.git (master)
by Alexei Starovoitov <[email protected]>:

Quoted 10 lines · On Sun, 9 Feb 2025 23:22:31 -0800 you wrote:

The generic_map_lookup_batch currently returns EINTR if it fails with ENOENT and retries several times on bpf_map_copy_value. The next batch would start from the same location, presuming it's a transient issue. This is incorrect if a map can actually have "holes", i.e. "get_next_key" can return a key that does not point to a valid value. At least the array of maps type may contain such holes legitly. Right now these holes show up, generic batch lookup cannot proceed any more. It will always fail with EINTR errors.

[...]

Here is the summary with links:
- [v3,bpf,1/2] bpf: skip non exist keys in generic_map_lookup_batch

    https://git.kernel.org/bpf/bpf/c/5644c6b50ffe
  - [v3,bpf,2/2] selftests: bpf: test batch lookup on array of maps with holes
    https://git.kernel.org/bpf/bpf/c/d66b7739176d

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html