ASoC: Add Richtek rt9123 and rt9123p support

new file mode 100644
index 000000000000..5acb05cdfefd
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9123.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9123 Audio Amplifier
+
+maintainers:
+  - ChiYuan Huang <[email protected]>
+
+description:
+  RT9123 is a 3.2W mono Class-D audio amplifier that features high efficiency
+  and performance with ultra-low quiescent current. The digital audio interface
+  support various formats, including I2S, left-justified, right-justified, and
+  TDM formats.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9123
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        amplifier@5e {
+            compatible = "richtek,rt9123";
+            reg = <0x5e>;
+            enable-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+            #sound-dai-cells = <0>;
+        };
+    };

index 40bb7a1d44bc..c61b2d3cf284 100644
@@ -234,6 +234,7 @@ config SND_SOC_ALL_CODECS
 	imply SND_SOC_RT1318_SDW
 	imply SND_SOC_RT1320_SDW
 	imply SND_SOC_RT9120
+	imply SND_SOC_RT9123
 	imply SND_SOC_RTQ9128
 	imply SND_SOC_SDW_MOCKUP
 	imply SND_SOC_SGTL5000

@@ -1823,6 +1824,14 @@ config SND_SOC_RT9120
 	  Enable support for Richtek RT9120 20W, stereo, inductor-less,
 	  high-efficiency Class-D audio amplifier.
 
+config SND_SOC_RT9123
+	tristate "Richtek RT9123 Mono Class-D Amplifier"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Enable support for the I2C control mode of Richtek RT9123 3.2W mono
+	  Class-D audio amplifier.
+
 config SND_SOC_RTQ9128
 	tristate "Richtek RTQ9128 45W Digital Input Amplifier"
 	depends on I2C

index 10f726066b6c..d8d0bc367af8 100644
@@ -270,6 +270,7 @@ snd-soc-rt715-sdca-y := rt715-sdca.o rt715-sdca-sdw.o
 snd-soc-rt721-sdca-y := rt721-sdca.o rt721-sdca-sdw.o
 snd-soc-rt722-sdca-y := rt722-sdca.o rt722-sdca-sdw.o
 snd-soc-rt9120-y := rt9120.o
+snd-soc-rt9123-y := rt9123.o
 snd-soc-rtq9128-y := rtq9128.o
 snd-soc-sdw-mockup-y := sdw-mockup.o
 snd-soc-sgtl5000-y := sgtl5000.o

@@ -684,6 +685,7 @@ obj-$(CONFIG_SND_SOC_RT715_SDCA_SDW)     += snd-soc-rt715-sdca.o
 obj-$(CONFIG_SND_SOC_RT721_SDCA_SDW)     += snd-soc-rt721-sdca.o
 obj-$(CONFIG_SND_SOC_RT722_SDCA_SDW)     += snd-soc-rt722-sdca.o
 obj-$(CONFIG_SND_SOC_RT9120)	+= snd-soc-rt9120.o
+obj-$(CONFIG_SND_SOC_RT9123)	+= snd-soc-rt9123.o
 obj-$(CONFIG_SND_SOC_RTQ9128)	+= snd-soc-rtq9128.o
 obj-$(CONFIG_SND_SOC_SDW_MOCKUP)     += snd-soc-sdw-mockup.o
 obj-$(CONFIG_SND_SOC_SGTL5000)  += snd-soc-sgtl5000.o

new file mode 100644
index 000000000000..693511dfdda4
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9123p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9123P Audio Amplifier
+
+maintainers:
+  - ChiYuan Huang <[email protected]>
+
+description:
+  RT9123P is a RT9123 variant which does not support I2C control.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9123p
+
+  '#sound-dai-cells':
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+
+  enable-delay-ms:
+    description:
+      Delay time for 'ENABLE' pin changes intended to make I2S clocks ready to
+      prevent speaker pop noise. The unit is in millisecond.
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    amplifier {
+        compatible = "richtek,rt9123p";
+        enable-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+        #sound-dai-cells = <0>;
+    };

index c61b2d3cf284..b0fa935846c0 100644
@@ -1832,6 +1832,12 @@ config SND_SOC_RT9123
 	  Enable support for the I2C control mode of Richtek RT9123 3.2W mono
 	  Class-D audio amplifier.
 
+config SND_SOC_RT9123P
+	tristate "Richtek RT9123P Mono Class-D Amplifier"
+	help
+	  Enable support for the HW control mode of Richtek RT9123P 3.2W mono
+	  Class-D audio amplifier.
+
 config SND_SOC_RTQ9128
 	tristate "Richtek RTQ9128 45W Digital Input Amplifier"
 	depends on I2C

index d8d0bc367af8..fba699701804 100644
@@ -271,6 +271,7 @@ snd-soc-rt721-sdca-y := rt721-sdca.o rt721-sdca-sdw.o
 snd-soc-rt722-sdca-y := rt722-sdca.o rt722-sdca-sdw.o
 snd-soc-rt9120-y := rt9120.o
 snd-soc-rt9123-y := rt9123.o
+snd-soc-rt9123p-y := rt9123p.o
 snd-soc-rtq9128-y := rtq9128.o
 snd-soc-sdw-mockup-y := sdw-mockup.o
 snd-soc-sgtl5000-y := sgtl5000.o

@@ -686,6 +687,7 @@ obj-$(CONFIG_SND_SOC_RT721_SDCA_SDW)     += snd-soc-rt721-sdca.o
 obj-$(CONFIG_SND_SOC_RT722_SDCA_SDW)     += snd-soc-rt722-sdca.o
 obj-$(CONFIG_SND_SOC_RT9120)	+= snd-soc-rt9120.o
 obj-$(CONFIG_SND_SOC_RT9123)	+= snd-soc-rt9123.o
+obj-$(CONFIG_SND_SOC_RT9123P)	+= snd-soc-rt9123p.o
 obj-$(CONFIG_SND_SOC_RTQ9128)	+= snd-soc-rtq9128.o
 obj-$(CONFIG_SND_SOC_SDW_MOCKUP)     += snd-soc-sdw-mockup.o
 obj-$(CONFIG_SND_SOC_SGTL5000)  += snd-soc-sgtl5000.o