Skip to contentSkip to conversation

Don't generate netlink .rst files inside $(srctree)

PATCH Superseded Mauro Carvalho Chehab 3 participants 22 messages Jun 18, 2025 – Jun 19, 2025

Subsystems (6)

v6 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

v6 cover Don't generate netlink .rst files inside $(srctree)

As discussed at:
https://lore.kernel.org/all/[email protected]/

changeset f061c9f7d058 ("Documentation: Document each netlink family") added a logic which generates *.rst files inside $(srctree). This is bad when O=<BUILDDIR> is used.

A recent change renamed the yaml files used by Netlink, revealing a bad side effect: as "make cleandocs" don't clean the produced files and symbols appear duplicated for people that don't build the kernel from scratch.

This series adds an yaml parser extension and uses an index file with glob for *. We opted to write such extension in a way that no actual yaml conversion code is inside it. This makes it flexible enough to handle other types of yaml files in the future. The actual yaml conversion logic were placed at netlink_yml_parser.py.

As requested by YNL maintainers, this version has netlink_yml_parser.py inside tools/net/ynl/pyynl/ directory. I don't like mixing libraries with binaries, nor to have Python libraries spread all over the Kernel. IMO, the best is to put all of them on a common place (scripts/lib, python/lib, lib/python, ...) but, as this can be solved later, for now let's keep it this way.

---

v6:
- YNL doc parser is now at tools/net/ynl/pyynl/lib/doc_generator.py;
- two patches got merged;
- added instructions to test docs with Sphinx 3.4.3 (minimal supported version);
- minor fixes.

v5:
- some patch reorg;
- netlink_yml_parser.py is now together with ynl tools;
- minor fixes.

v4:
- Renamed the YNL parser class;
- some minor patch cleanups and merges;
- added an extra patch to fix a insert_pattern/exclude_pattern logic when SPHINXDIRS is used.

v3:
- Two series got merged altogether:
- https://lore.kernel.org/linux-doc/[email protected]/T/#t
- https://lore.kernel.org/linux-doc/[email protected]

- Added an extra patch to update MAINTAINERS to point to YNL library
- Added a (somewhat unrelated) patch that remove warnings check when running "make cleandocs".

Mauro Carvalho Chehab (15):
docs: conf.py: properly handle include and exclude patterns
docs: Makefile: disable check rules on make cleandocs
docs: netlink: netlink-raw.rst: use :ref: instead of :doc:
tools: ynl_gen_rst.py: Split library from command line tool
docs: netlink: index.rst: add a netlink index file
tools: ynl_gen_rst.py: cleanup coding style
docs: sphinx: add a parser for yaml files for Netlink specs
docs: use parser_yaml extension to handle Netlink specs
docs: uapi: netlink: update netlink specs link
tools: ynl_gen_rst.py: drop support for generating index files
docs: netlink: remove obsolete .gitignore from unused directory
MAINTAINERS: add netlink_yml_parser.py to linux-doc
tools: netlink_yml_parser.py: add line numbers to parsed data
docs: parser_yaml.py: add support for line numbers from the parser
docs: sphinx: add a file with the requirements for lowest version

 Documentation/Makefile                        |  19 +-
 Documentation/conf.py                         |  87 +++-
 Documentation/doc-guide/sphinx.rst            |  15 +
 Documentation/netlink/specs/index.rst         |  13 +
 Documentation/networking/index.rst            |   2 +-
 .../networking/netlink_spec/.gitignore        |   1 -
 .../networking/netlink_spec/readme.txt        |   4 -
 Documentation/sphinx/min_requirements.txt     |   8 +
 Documentation/sphinx/parser_yaml.py           |  84 ++++
 Documentation/userspace-api/netlink/index.rst |   2 +-
 .../userspace-api/netlink/netlink-raw.rst     |   6 +-
 Documentation/userspace-api/netlink/specs.rst |   2 +-
 MAINTAINERS                                   |   1 +
 tools/net/ynl/pyynl/lib/__init__.py           |   2 +
 tools/net/ynl/pyynl/lib/doc_generator.py      | 398 ++++++++++++++++++
 tools/net/ynl/pyynl/ynl_gen_rst.py            | 384 +----------------
 16 files changed, 614 insertions(+), 414 deletions(-)
 create mode 100644 Documentation/netlink/specs/index.rst
 delete mode 100644 Documentation/networking/netlink_spec/.gitignore
 delete mode 100644 Documentation/networking/netlink_spec/readme.txt
 create mode 100644 Documentation/sphinx/min_requirements.txt
 create mode 100755 Documentation/sphinx/parser_yaml.py
 create mode 100644 tools/net/ynl/pyynl/lib/doc_generator.py
Signature · 1 line
2.49.0
#1 lore raw

PATCH v6 1/15 docs: conf.py: properly handle include and exclude patterns

When one does:
make SPHINXDIRS="foo" htmldocs

All patterns would be relative to Documentation/foo, which causes the include/exclude patterns like:

	include_patterns = [
		...
		f'foo/*.{ext}',
	]

to break. This is not what it is expected. Address it by adding a logic to dynamically adjust the pattern when SPHINXDIRS is used.

That allows adding parsers for other file types.

It should be noticed that include_patterns was added on Sphinx 5.1:
https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-include_patterns

So, a backward-compatible code is needed when we start using it for real.

---
 Documentation/conf.py | 67 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 63 insertions(+), 4 deletions(-)
Documentation/conf.py +63 -4
index 12de52a2b17e..4ba4ee45e599 100644
@@ -17,6 +17,66 @@ import os
 import sphinx
 import shutil
 
+# Get Sphinx version
+major, minor, patch = sphinx.version_info[:3]
+
+# Include_patterns were added on Sphinx 5.1
+if (major < 5) or (major == 5 and minor < 1):
+    has_include_patterns = False
+else:
+    has_include_patterns = True
+    # Include patterns that don't contain directory names, in glob format
+    include_patterns = ['**.rst']
+
+# Location of Documentation/ directory
+doctree = os.path.abspath('.')
+
+# Exclude of patterns that don't contain directory names, in glob format.
+exclude_patterns = []
+
+# List of patterns that contain directory names in glob format.
+dyn_include_patterns = []
+dyn_exclude_patterns = ['output']
+
+# Properly handle include/exclude patterns
+# ----------------------------------------
+
+def update_patterns(app):
+
+    """
+    On Sphinx, all directories are relative to what it is passed as
+    SOURCEDIR parameter for sphinx-build. Due to that, all patterns
+    that have directory names on it need to be dynamically set, after
+    converting them to a relative patch.
+
+    As Sphinx doesn't include any patterns outside SOURCEDIR, we should
+    exclude relative patterns that start with "../".
+    """
+
+    sourcedir = app.srcdir  # full path to the source directory
+    builddir = os.environ.get("BUILDDIR")
+
+    # setup include_patterns dynamically
+    if has_include_patterns:
+        for p in dyn_include_patterns:
+            full = os.path.join(doctree, p)
+
+            rel_path = os.path.relpath(full, start = app.srcdir)
+            if rel_path.startswith("../"):
+                continue
+
+            app.config.include_patterns.append(rel_path)
+
+    # setup exclude_patterns dynamically
+    for p in dyn_exclude_patterns:
+        full = os.path.join(doctree, p)
+
+        rel_path = os.path.relpath(full, start = app.srcdir)
+        if rel_path.startswith("../"):
+            continue
+
+        app.config.exclude_patterns.append(rel_path)
+
 # helper
 # ------
 
@@ -219,10 +279,6 @@ language = 'en'
 # Else, today_fmt is used as the format for a strftime call.
 #today_fmt = '%B %d, %Y'
 
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = ['output']
-
 # The reST default role (used for this markup: `text`) to use for all
 # documents.
 #default_role = None
@@ -516,3 +572,6 @@ kerneldoc_srctree = '..'
 # the last statement in the conf.py file
 # ------------------------------------------------------------------------------
 loadConfig(globals())
+
+def setup(app):
+	app.connect('builder-inited', update_patterns)
Signature · 1 line
2.49.0
#5 lore raw

PATCH v6 3/15 docs: netlink: netlink-raw.rst: use :ref: instead of :doc:

In reply to Mauro Carvalho Chehab

Currently, rt documents are referred with:

Documentation/userspace-api/netlink/netlink-raw.rst: :doc:rt-link<../../networking/netlink_spec/rt-link> Documentation/userspace-api/netlink/netlink-raw.rst: :doc:tc<../../networking/netlink_spec/tc> Documentation/userspace-api/netlink/netlink-raw.rst: :doc:tc<../../networking/netlink_spec/tc>

Having :doc: references with relative paths doesn't always work, as it may have troubles when O= is used. Also that's hard to maintain, and may break if we change the way rst files are generated from yaml. Better to use instead a reference for the netlink family.

So, replace them by Sphinx cross-reference tag that are created by ynl_gen_rst.py.

---
 Documentation/userspace-api/netlink/netlink-raw.rst | 6 +++---
 tools/net/ynl/pyynl/ynl_gen_rst.py                  | 5 +++--
 2 files changed, 6 insertions(+), 5 deletions(-)
Documentation/userspace-api/netlink/netlink-raw.rst +3 -3
index 31fc91020eb3..aae296c170c5 100644
@@ -62,8 +62,8 @@ Sub-messages
 ------------
 
 Several raw netlink families such as
-:doc:`rt-link<../../networking/netlink_spec/rt-link>` and
-:doc:`tc<../../networking/netlink_spec/tc>` use attribute nesting as an
+:ref:`rt-link<netlink-rt-link>` and
+:ref:`tc<netlink-tc>` use attribute nesting as an
 abstraction to carry module specific information.
 
 Conceptually it looks as follows::
@@ -162,7 +162,7 @@ then this is an error.
 Nested struct definitions
 -------------------------
 
-Many raw netlink families such as :doc:`tc<../../networking/netlink_spec/tc>`
+Many raw netlink families such as :ref:`tc<netlink-tc>`
 make use of nested struct definitions. The ``netlink-raw`` schema makes it
 possible to embed a struct within a struct definition using the ``struct``
 property. For example, the following struct definition embeds the
tools/net/ynl/pyynl/ynl_gen_rst.py +3 -2
index 0cb6348e28d3..7bfb8ceeeefc 100755
@@ -314,10 +314,11 @@ def parse_yaml(obj: Dict[str, Any]) -> str:
 
     # Main header
 
-    lines.append(rst_header())
-
     family = obj['name']
 
+    lines.append(rst_header())
+    lines.append(rst_label("netlink-" + family))
+
     title = f"Family ``{family}`` netlink specification"
     lines.append(rst_title(title))
     lines.append(rst_paragraph(".. contents:: :depth: 3\n"))
Signature · 1 line
2.49.0
#7 lore raw

PATCH v6 5/15 docs: netlink: index.rst: add a netlink index file

In reply to Mauro Carvalho Chehab

Instead of generating the index file, use glob to automatically include all data from yaml.

---
 Documentation/netlink/specs/index.rst | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 Documentation/netlink/specs/index.rst
Documentation/netlink/specs/index.rst new file +13 -0
new file mode 100644
index 000000000000..7f7cf4a096f2
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _specs:
+
+=============================
+Netlink Family Specifications
+=============================
+
+.. toctree::
+   :maxdepth: 1
+   :glob:
+
+   *
Signature · 1 line
2.49.0
#9 lore raw

PATCH v6 7/15 docs: sphinx: add a parser for yaml files for Netlink specs

In reply to Mauro Carvalho Chehab

Add a simple sphinx.Parser to handle yaml files and add the the code to handle Netlink specs. All other yaml files are ignored.

The code was written in a way that parsing yaml for different subsystems and even for different parts of Netlink are easy.

All it takes to have a different parser is to add an import line similar to:

from netlink_yml_parser import YnlDocGenerator

adding the corresponding parser somewhere at the extension:

netlink_parser = YnlDocGenerator()

And then add a logic inside parse() to handle different doc outputs, depending on the file location, similar to:

if "/netlink/specs/" in fname:
msg = self.netlink_parser.parse_yaml_file(fname)

---
 Documentation/sphinx/parser_yaml.py | 76 +++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100755 Documentation/sphinx/parser_yaml.py
Documentation/sphinx/parser_yaml.py new file +76 -0
new file mode 100755
index 000000000000..635945e1c5ba
@@ -0,0 +1,76 @@
+"""
+Sphinx extension for processing YAML files
+"""
+
+import os
+import re
+import sys
+
+from pprint import pformat
+
+from docutils.parsers.rst import Parser as RSTParser
+from docutils.statemachine import ViewList
+
+from sphinx.util import logging
+from sphinx.parsers import Parser
+
+srctree = os.path.abspath(os.environ["srctree"])
+sys.path.insert(0, os.path.join(srctree, "tools/net/ynl/pyynl"))
+
+from netlink_yml_parser import YnlDocGenerator        # pylint: disable=C0413
+
+logger = logging.getLogger(__name__)
+
+class YamlParser(Parser):
+    """Custom parser for YAML files."""
+
+    # Need at least two elements on this set
+    supported = ('yaml', 'yml')
+
+    netlink_parser = YnlDocGenerator()
+
+    def do_parse(self, inputstring, document, msg):
+        """Parse YAML and generate a document tree."""
+
+        self.setup_parse(inputstring, document)
+
+        result = ViewList()
+
+        try:
+            # Parse message with RSTParser
+            for i, line in enumerate(msg.split('\n')):
+                result.append(line, document.current_source, i)
+
+            rst_parser = RSTParser()
+            rst_parser.parse('\n'.join(result), document)
+
+        except Exception as e:
+            document.reporter.error("YAML parsing error: %s" % pformat(e))
+
+        self.finish_parse()
+
+    # Overrides docutils.parsers.Parser. See sphinx.parsers.RSTParser
+    def parse(self, inputstring, document):
+        """Check if a YAML is meant to be parsed."""
+
+        fname = document.current_source
+
+        # Handle netlink yaml specs
+        if "/netlink/specs/" in fname:
+            msg = self.netlink_parser.parse_yaml_file(fname)
+            self.do_parse(inputstring, document, msg)
+
+        # All other yaml files are ignored
+
+def setup(app):
+    """Setup function for the Sphinx extension."""
+
+    # Add YAML parser
+    app.add_source_parser(YamlParser)
+    app.add_source_suffix('.yaml', 'yaml')
+
+    return {
+        'version': '1.0',
+        'parallel_read_safe': True,
+        'parallel_write_safe': True,
+    }
Signature · 1 line
2.49.0
#10 lore raw

PATCH v6 8/15 docs: use parser_yaml extension to handle Netlink specs

In reply to Mauro Carvalho Chehab

Instead of manually calling ynl_gen_rst.py, use a Sphinx extension. This way, no .rst files would be written to the Kernel source directories.

We are using here a toctree with :glob: property. This way, there is no need to touch the netlink/specs/index.rst file every time a new Netlink spec is added/renamed/removed.

---
 Documentation/Makefile                        | 17 ----------------
 Documentation/conf.py                         | 20 ++++++++++++++-----
 Documentation/networking/index.rst            |  2 +-
 .../networking/netlink_spec/readme.txt        |  4 ----
 Documentation/sphinx/parser_yaml.py           |  4 ++--
 5 files changed, 18 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/networking/netlink_spec/readme.txt
Documentation/Makefile +0 -17
index b98477df5ddf..820f07e0afe6 100644
@@ -104,22 +104,6 @@ quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
 		cp $(if $(patsubst /%,,$(DOCS_CSS)),$(abspath $(srctree)/$(DOCS_CSS)),$(DOCS_CSS)) $(BUILDDIR)/$3/_static/; \
 	fi
 
-YNL_INDEX:=$(srctree)/Documentation/networking/netlink_spec/index.rst
-YNL_RST_DIR:=$(srctree)/Documentation/networking/netlink_spec
-YNL_YAML_DIR:=$(srctree)/Documentation/netlink/specs
-YNL_TOOL:=$(srctree)/tools/net/ynl/pyynl/ynl_gen_rst.py
-
-YNL_RST_FILES_TMP := $(patsubst %.yaml,%.rst,$(wildcard $(YNL_YAML_DIR)/*.yaml))
-YNL_RST_FILES := $(patsubst $(YNL_YAML_DIR)%,$(YNL_RST_DIR)%, $(YNL_RST_FILES_TMP))
-
-$(YNL_INDEX): $(YNL_RST_FILES)
-	$(Q)$(YNL_TOOL) -o $@ -x
-
-$(YNL_RST_DIR)/%.rst: $(YNL_YAML_DIR)/%.yaml $(YNL_TOOL)
-	$(Q)$(YNL_TOOL) -i $< -o $@
-
-htmldocs texinfodocs latexdocs epubdocs xmldocs: $(YNL_INDEX)
-
 htmldocs:
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
@@ -186,7 +170,6 @@ refcheckdocs:
 	$(Q)cd $(srctree);scripts/documentation-file-ref-check
 
 cleandocs:
-	$(Q)rm -f $(YNL_INDEX) $(YNL_RST_FILES)
 	$(Q)rm -rf $(BUILDDIR)
 	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media clean
 
Documentation/conf.py +15 -5
index 4ba4ee45e599..6af61e26cec5 100644
@@ -38,6 +38,15 @@ exclude_patterns = []
 dyn_include_patterns = []
 dyn_exclude_patterns = ['output']
 
+# Currently, only netlink/specs has a parser for yaml.
+# Prefer using include patterns if available, as it is faster
+if has_include_patterns:
+    dyn_include_patterns.append('netlink/specs/*.yaml')
+else:
+    dyn_exclude_patterns.append('netlink/*.yaml')
+    dyn_exclude_patterns.append('devicetree/bindings/**.yaml')
+    dyn_exclude_patterns.append('core-api/kho/bindings/**.yaml')
+
 # Properly handle include/exclude patterns
 # ----------------------------------------
 
@@ -105,7 +114,7 @@ needs_sphinx = '3.4.3'
 extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
               'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
               'maintainers_include', 'sphinx.ext.autosectionlabel',
-              'kernel_abi', 'kernel_feat', 'translations']
+              'kernel_abi', 'kernel_feat', 'translations', 'parser_yaml']
 
 # Since Sphinx version 3, the C function parser is more pedantic with regards
 # to type checking. Due to that, having macros at c:function cause problems.
@@ -203,10 +212,11 @@ else:
 # Add any paths that contain templates here, relative to this directory.
 templates_path = ['sphinx/templates']
 
-# The suffix(es) of source filenames.
-# You can specify multiple suffix as a list of string:
-# source_suffix = ['.rst', '.md']
-source_suffix = '.rst'
+# The suffixes of source filenames that will be automatically parsed
+source_suffix = {
+        '.rst': 'restructuredtext',
+        '.yaml': 'yaml',
+}
 
 # The encoding of source files.
 #source_encoding = 'utf-8-sig'
Documentation/networking/index.rst +1 -1
index ac90b82f3ce9..b7a4969e9bc9 100644
@@ -57,7 +57,7 @@ Contents:
    filter
    generic-hdlc
    generic_netlink
-   netlink_spec/index
+   ../netlink/specs/index
    gen_stats
    gtp
    ila
Documentation/networking/netlink_spec/readme.txt deleted +0 -4
deleted file mode 100644
index 030b44aca4e6..000000000000
@@ -1,4 +0,0 @@
-SPDX-License-Identifier: GPL-2.0
-
-This file is populated during the build of the documentation (htmldocs) by the
-tools/net/ynl/pyynl/ynl_gen_rst.py script.
Documentation/sphinx/parser_yaml.py +2 -2
index 635945e1c5ba..2b2af239a1c2 100755
@@ -15,9 +15,9 @@ from sphinx.util import logging
 from sphinx.parsers import Parser
 
 srctree = os.path.abspath(os.environ["srctree"])
-sys.path.insert(0, os.path.join(srctree, "tools/net/ynl/pyynl"))
+sys.path.insert(0, os.path.join(srctree, "tools/net/ynl/pyynl/lib"))
 
-from netlink_yml_parser import YnlDocGenerator        # pylint: disable=C0413
+from doc_generator import YnlDocGenerator        # pylint: disable=C0413
 
 logger = logging.getLogger(__name__)
 
Signature · 1 line
2.49.0
#4 lore raw

PATCH v6 2/15 docs: Makefile: disable check rules on make cleandocs

In reply to Mauro Carvalho Chehab

It doesn't make sense to check for missing ABI and documents when cleaning the tree.

---
 Documentation/Makefile | 2 ++
 1 file changed, 2 insertions(+)
Documentation/Makefile +2 -0
index d30d66ddf1ad..b98477df5ddf 100644
@@ -5,6 +5,7 @@
 # for cleaning
 subdir- := devicetree/bindings
 
+ifneq ($(MAKECMDGOALS),cleandocs)
 # Check for broken documentation file references
 ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y)
 $(shell $(srctree)/scripts/documentation-file-ref-check --warn)
@@ -14,6 +15,7 @@ endif
 ifeq ($(CONFIG_WARN_ABI_ERRORS),y)
 $(shell $(srctree)/scripts/get_abi.py --dir $(srctree)/Documentation/ABI validate)
 endif
+endif
 
 # You can set these variables from the command line.
 SPHINXBUILD   = sphinx-build
Signature · 1 line
2.49.0
#6 lore raw

PATCH v6 4/15 tools: ynl_gen_rst.py: Split library from command line tool

In reply to Mauro Carvalho Chehab

As we'll be using the Netlink specs parser inside a Sphinx extension, move the library part from the command line parser.

No functional changes.

---
 tools/net/ynl/pyynl/lib/__init__.py      |   2 +
 tools/net/ynl/pyynl/lib/doc_generator.py | 409 +++++++++++++++++++++++
 tools/net/ynl/pyynl/ynl_gen_rst.py       | 361 +-------------------
 3 files changed, 419 insertions(+), 353 deletions(-)
 create mode 100644 tools/net/ynl/pyynl/lib/doc_generator.py
tools/net/ynl/pyynl/lib/__init__.py +2 -0
index 71518b9842ee..5f266ebe4526 100644
@@ -4,6 +4,8 @@ from .nlspec import SpecAttr, SpecAttrSet, SpecEnumEntry, SpecEnumSet, \
     SpecFamily, SpecOperation, SpecSubMessage, SpecSubMessageFormat
 from .ynl import YnlFamily, Netlink, NlError
 
+from .doc_generator import YnlDocGenerator
+
 __all__ = ["SpecAttr", "SpecAttrSet", "SpecEnumEntry", "SpecEnumSet",
            "SpecFamily", "SpecOperation", "SpecSubMessage", "SpecSubMessageFormat",
            "YnlFamily", "Netlink", "NlError"]
tools/net/ynl/pyynl/lib/doc_generator.py new file +409 -0

409 lines not on this page · raw message

tools/net/ynl/pyynl/ynl_gen_rst.py +8 -353

401 lines not on this page · raw message

Signature · 1 line
2.49.0
#8 lore raw

PATCH v6 6/15 tools: ynl_gen_rst.py: cleanup coding style

In reply to Mauro Carvalho Chehab

Cleanup some coding style issues pointed by pylint and flake8.

No functional changes.

---
 tools/net/ynl/pyynl/lib/doc_generator.py | 75 ++++++++----------------
 1 file changed, 26 insertions(+), 49 deletions(-)
tools/net/ynl/pyynl/lib/doc_generator.py +26 -49
index 839e78b39de3..f71360f0ceb7 100644
@@ -18,17 +18,12 @@
 """
 
 from typing import Any, Dict, List
-import os.path
-import sys
-import argparse
-import logging
 import yaml
 
 
-# ==============
-# RST Formatters
-# ==============
 class RstFormatters:
+    """RST Formatters"""
+
     SPACE_PER_LEVEL = 4
 
     @staticmethod
@@ -36,81 +31,67 @@ class RstFormatters:
         """Return space to format"""
         return " " * (level * RstFormatters.SPACE_PER_LEVEL)
 
-
     @staticmethod
     def bold(text: str) -> str:
         """Format bold text"""
         return f"**{text}**"
 
-
     @staticmethod
     def inline(text: str) -> str:
         """Format inline text"""
         return f"``{text}``"
 
-
     @staticmethod
     def sanitize(text: str) -> str:
         """Remove newlines and multiple spaces"""
         # This is useful for some fields that are spread across multiple lines
         return str(text).replace("\n", " ").strip()
 
-
     def rst_fields(self, key: str, value: str, level: int = 0) -> str:
         """Return a RST formatted field"""
         return self.headroom(level) + f":{key}: {value}"
 
-
     def rst_definition(self, key: str, value: Any, level: int = 0) -> str:
         """Format a single rst definition"""
         return self.headroom(level) + key + "\n" + self.headroom(level + 1) + str(value)
 
-
     def rst_paragraph(self, paragraph: str, level: int = 0) -> str:
         """Return a formatted paragraph"""
         return self.headroom(level) + paragraph
 
-
     def rst_bullet(self, item: str, level: int = 0) -> str:
         """Return a formatted a bullet"""
         return self.headroom(level) + f"- {item}"
 
-
     @staticmethod
     def rst_subsection(title: str) -> str:
         """Add a sub-section to the document"""
         return f"{title}\n" + "-" * len(title)
 
-
     @staticmethod
     def rst_subsubsection(title: str) -> str:
         """Add a sub-sub-section to the document"""
         return f"{title}\n" + "~" * len(title)
 
-
     @staticmethod
     def rst_section(namespace: str, prefix: str, title: str) -> str:
         """Add a section to the document"""
         return f".. _{namespace}-{prefix}-{title}:\n\n{title}\n" + "=" * len(title)
 
-
     @staticmethod
     def rst_subtitle(title: str) -> str:
         """Add a subtitle to the document"""
         return "\n" + "-" * len(title) + f"\n{title}\n" + "-" * len(title) + "\n\n"
 
-
     @staticmethod
     def rst_title(title: str) -> str:
         """Add a title to the document"""
         return "=" * len(title) + f"\n{title}\n" + "=" * len(title) + "\n\n"
 
-
     def rst_list_inline(self, list_: List[str], level: int = 0) -> str:
         """Format a list using inlines"""
         return self.headroom(level) + "[" + ", ".join(self.inline(i) for i in list_) + "]"
 
-
     @staticmethod
     def rst_ref(namespace: str, prefix: str, name: str) -> str:
         """Add a hyperlink to the document"""
@@ -119,10 +100,9 @@ class RstFormatters:
                     'nested-attributes': 'attribute-set',
                     'struct': 'definition'}
         if prefix in mappings:
-            prefix = mappings[prefix]
+            prefix = mappings.get(prefix, "")
         return f":ref:`{namespace}-{prefix}-{name}`"
 
-
     def rst_header(self) -> str:
         """The headers for all the auto generated RST files"""
         lines = []
@@ -132,7 +112,6 @@ class RstFormatters:
 
         return "\n".join(lines)
 
-
     @staticmethod
     def rst_toctree(maxdepth: int = 2) -> str:
         """Generate a toctree RST primitive"""
@@ -143,16 +122,13 @@ class RstFormatters:
 
         return "\n".join(lines)
 
-
     @staticmethod
     def rst_label(title: str) -> str:
         """Return a formatted label"""
         return f".. _{title}:\n\n"
 
-# =======
-# Parsers
-# =======
 class YnlDocGenerator:
+    """YAML Netlink specs Parser"""
 
     fmt = RstFormatters()
 
@@ -164,7 +140,6 @@ class YnlDocGenerator:
 
         return "\n".join(lines)
 
-
     def parse_do(self, do_dict: Dict[str, Any], level: int = 0) -> str:
         """Parse 'do' section and return a formatted string"""
         lines = []
@@ -177,16 +152,16 @@ class YnlDocGenerator:
 
         return "\n".join(lines)
 
-
     def parse_do_attributes(self, attrs: Dict[str, Any], level: int = 0) -> str:
         """Parse 'attributes' section"""
         if "attributes" not in attrs:
             return ""
-        lines = [self.fmt.rst_fields("attributes", self.fmt.rst_list_inline(attrs["attributes"]), level + 1)]
+        lines = [self.fmt.rst_fields("attributes",
+                                     self.fmt.rst_list_inline(attrs["attributes"]),
+                                     level + 1)]
 
         return "\n".join(lines)
 
-
     def parse_operations(self, operations: List[Dict[str, Any]], namespace: str) -> str:
         """Parse operations block"""
         preprocessed = ["name", "doc", "title", "do", "dump", "flags"]
@@ -194,7 +169,8 @@ class YnlDocGenerator:
         lines = []
 
         for operation in operations:
-            lines.append(self.fmt.rst_section(namespace, 'operation', operation["name"]))
+            lines.append(self.fmt.rst_section(namespace, 'operation',
+                                              operation["name"]))
             lines.append(self.fmt.rst_paragraph(operation["doc"]) + "\n")
 
             for key in operation.keys():
@@ -206,7 +182,8 @@ class YnlDocGenerator:
                     value = self.fmt.rst_ref(namespace, key, value)
                 lines.append(self.fmt.rst_fields(key, value, 0))
             if 'flags' in operation:
-                lines.append(self.fmt.rst_fields('flags', self.fmt.rst_list_inline(operation['flags'])))
+                lines.append(self.fmt.rst_fields('flags',
+                                                 self.fmt.rst_list_inline(operation['flags'])))
 
             if "do" in operation:
                 lines.append(self.fmt.rst_paragraph(":do:", 0))
@@ -220,7 +197,6 @@ class YnlDocGenerator:
 
         return "\n".join(lines)
 
-
     def parse_entries(self, entries: List[Dict[str, Any]], level: int) -> str:
         """Parse a list of entries"""
         ignored = ["pad"]
@@ -235,17 +211,19 @@ class YnlDocGenerator:
                 if type_:
                     field_name += f" ({self.fmt.inline(type_)})"
                 lines.append(
-                    self.fmt.rst_fields(field_name, self.fmt.sanitize(entry.get("doc", "")), level)
+                    self.fmt.rst_fields(field_name,
+                                        self.fmt.sanitize(entry.get("doc", "")),
+                                        level)
                 )
             elif isinstance(entry, list):
                 lines.append(self.fmt.rst_list_inline(entry, level))
             else:
-                lines.append(self.fmt.rst_bullet(self.fmt.inline(self.fmt.sanitize(entry)), level))
+                lines.append(self.fmt.rst_bullet(self.fmt.inline(self.fmt.sanitize(entry)),
+                                                 level))
 
         lines.append("\n")
         return "\n".join(lines)
 
-
     def parse_definitions(self, defs: Dict[str, Any], namespace: str) -> str:
         """Parse definitions section"""
         preprocessed = ["name", "entries", "members"]
@@ -270,7 +248,6 @@ class YnlDocGenerator:
 
         return "\n".join(lines)
 
-
     def parse_attr_sets(self, entries: List[Dict[str, Any]], namespace: str) -> str:
         """Parse attribute from attribute-set"""
         preprocessed = ["name", "type"]
@@ -279,7 +256,8 @@ class YnlDocGenerator:
         lines = []
 
         for entry in entries:
-            lines.append(self.fmt.rst_section(namespace, 'attribute-set', entry["name"]))
+            lines.append(self.fmt.rst_section(namespace, 'attribute-set',
+                                              entry["name"]))
             for attr in entry["attributes"]:
                 type_ = attr.get("type")
                 attr_line = attr["name"]
@@ -301,13 +279,13 @@ class YnlDocGenerator:
 
         return "\n".join(lines)
 
-
     def parse_sub_messages(self, entries: List[Dict[str, Any]], namespace: str) -> str:
         """Parse sub-message definitions"""
         lines = []
 
         for entry in entries:
-            lines.append(self.fmt.rst_section(namespace, 'sub-message', entry["name"]))
+            lines.append(self.fmt.rst_section(namespace, 'sub-message',
+                                              entry["name"]))
             for fmt in entry["formats"]:
                 value = fmt["value"]
 
@@ -315,13 +293,14 @@ class YnlDocGenerator:
                 for attr in ['fixed-header', 'attribute-set']:
                     if attr in fmt:
                         lines.append(self.fmt.rst_fields(attr,
-                                                self.fmt.rst_ref(namespace, attr, fmt[attr]),
-                                                1))
+                                                         self.fmt.rst_ref(namespace,
+                                                                          attr,
+                                                                          fmt[attr]),
+                                                         1))
                 lines.append("\n")
 
         return "\n".join(lines)
 
-
     def parse_yaml(self, obj: Dict[str, Any]) -> str:
         """Format the whole YAML into a RST string"""
         lines = []
@@ -344,7 +323,8 @@ class YnlDocGenerator:
         # Operations
         if "operations" in obj:
             lines.append(self.fmt.rst_subtitle("Operations"))
-            lines.append(self.parse_operations(obj["operations"]["list"], family))
+            lines.append(self.parse_operations(obj["operations"]["list"],
+                                               family))
 
         # Multicast groups
         if "mcast-groups" in obj:
@@ -368,11 +348,9 @@ class YnlDocGenerator:
 
         return "\n".join(lines)
 
-
     # Main functions
     # ==============
 
-
     def parse_yaml_file(self, filename: str) -> str:
         """Transform the YAML specified by filename into an RST-formatted string"""
         with open(filename, "r", encoding="utf-8") as spec_file:
@@ -381,7 +359,6 @@ class YnlDocGenerator:
 
         return content
 
-
     def generate_main_index_rst(self, output: str, index_dir: str) -> None:
         """Generate the `networking_spec/index` content and write to the file"""
         lines = []
Signature · 1 line
2.49.0
#11 lore raw

PATCH v6 9/15 docs: uapi: netlink: update netlink specs link

In reply to Mauro Carvalho Chehab

With the recent parser_yaml extension, and the removal of the auto-generated ReST source files, the location of netlink specs changed.

Update uAPI accordingly.

---
 Documentation/userspace-api/netlink/index.rst | 2 +-
 Documentation/userspace-api/netlink/specs.rst | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
Documentation/userspace-api/netlink/index.rst +1 -1
index c1b6765cc963..83ae25066591 100644
@@ -18,4 +18,4 @@ Netlink documentation for users.
 
 See also:
  - :ref:`Documentation/core-api/netlink.rst <kernel_netlink>`
- - :ref:`Documentation/networking/netlink_spec/index.rst <specs>`
+ - :ref:`Documentation/netlink/specs/index.rst <specs>`
Documentation/userspace-api/netlink/specs.rst +1 -1
index 1b50d97d8d7c..debb4bfca5c4 100644
@@ -15,7 +15,7 @@ kernel headers directly.
 Internally kernel uses the YAML specs to generate:
 
  - the C uAPI header
- - documentation of the protocol as a ReST file - see :ref:`Documentation/networking/netlink_spec/index.rst <specs>`
+ - documentation of the protocol as a ReST file - see :ref:`Documentation/netlink/specs/index.rst <specs>`
  - policy tables for input attribute validation
  - operation tables
 
Signature · 1 line
2.49.0
#12 lore raw

PATCH v6 10/15 tools: ynl_gen_rst.py: drop support for generating index files

In reply to Mauro Carvalho Chehab

As we're now using an index file with a glob, there's no need to generate index files anymore.

---
 tools/net/ynl/pyynl/lib/doc_generator.py | 26 ------------------------
 tools/net/ynl/pyynl/ynl_gen_rst.py       | 26 ------------------------
 2 files changed, 52 deletions(-)
tools/net/ynl/pyynl/lib/doc_generator.py +0 -26
index f71360f0ceb7..866551726723 100644
@@ -358,29 +358,3 @@ class YnlDocGenerator:
             content = self.parse_yaml(yaml_data)
 
         return content
-
-    def generate_main_index_rst(self, output: str, index_dir: str) -> None:
-        """Generate the `networking_spec/index` content and write to the file"""
-        lines = []
-
-        lines.append(self.fmt.rst_header())
-        lines.append(self.fmt.rst_label("specs"))
-        lines.append(self.fmt.rst_title("Netlink Family Specifications"))
-        lines.append(self.fmt.rst_toctree(1))
-
-        index_fname = os.path.basename(output)
-        base, ext = os.path.splitext(index_fname)
-
-        if not index_dir:
-            index_dir = os.path.dirname(output)
-
-        logging.debug(f"Looking for {ext} files in %s", index_dir)
-        for filename in sorted(os.listdir(index_dir)):
-            if not filename.endswith(ext) or filename == index_fname:
-                continue
-            base, ext = os.path.splitext(filename)
-            lines.append(f"   {base}\n")
-
-        logging.debug("Writing an index file at %s", output)
-
-        return "".join(lines)
tools/net/ynl/pyynl/ynl_gen_rst.py +0 -26
index b5a665eeaa5a..90ae19aac89d 100755
@@ -31,9 +31,6 @@ def parse_arguments() -> argparse.Namespace:
 
     # Index and input are mutually exclusive
     group = parser.add_mutually_exclusive_group()
-    group.add_argument(
-        "-x", "--index", action="store_true", help="Generate the index page"
-    )
     group.add_argument("-i", "--input", help="YAML file name")
 
     args = parser.parse_args()
@@ -63,25 +60,6 @@ def write_to_rstfile(content: str, filename: str) -> None:
         rst_file.write(content)
 
 
-def generate_main_index_rst(output: str) -> None:
-    """Generate the `networking_spec/index` content and write to the file"""
-
-    lines.append(rst_header())
-    lines.append(rst_label("specs"))
-    lines.append(rst_title("Netlink Family Specifications"))
-    lines.append(rst_toctree(1))
-
-    index_dir = os.path.dirname(output)
-    logging.debug("Looking for .rst files in %s", index_dir)
-    for filename in sorted(os.listdir(index_dir)):
-        if not filename.endswith(".rst") or filename == "index.rst":
-            continue
-        lines.append(f"   {filename.replace('.rst', '')}\n")
-
-    logging.debug("Writing an index file at %s", output)
-    write_to_rstfile(msg, output)
-
-
 def main() -> None:
     """Main function that reads the YAML files and generates the RST files"""
 
@@ -100,10 +78,6 @@ def main() -> None:
 
         write_to_rstfile(content, args.output)
 
-    if args.index:
-        # Generate the index RST file
-        generate_main_index_rst(args.output)
-
 
 if __name__ == "__main__":
     main()
Signature · 1 line
2.49.0
#13 lore raw

PATCH v6 11/15 docs: netlink: remove obsolete .gitignore from unused directory

In reply to Mauro Carvalho Chehab

The previous code was generating source rst files under Documentation/networking/netlink_spec/. With the Sphinx YAML parser, this is now gone. So, stop ignoring *.rst files inside netlink specs directory.

---
 Documentation/networking/netlink_spec/.gitignore | 1 -
 1 file changed, 1 deletion(-)
 delete mode 100644 Documentation/networking/netlink_spec/.gitignore
Documentation/networking/netlink_spec/.gitignore deleted +0 -1
deleted file mode 100644
index 30d85567b592..000000000000
@@ -1 +0,0 @@
-*.rst
Signature · 1 line
2.49.0
#14 lore raw

PATCH v6 12/15 MAINTAINERS: add netlink_yml_parser.py to linux-doc

In reply to Mauro Carvalho Chehab

The documentation build depends on the parsing code at ynl_gen_rst.py. Ensure that changes to it will be c/c to linux-doc ML and maintainers by adding an entry for it. This way, if a change there would affect the build, or the minimal version required for Python, doc developers may know in advance.

---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
index a92290fffa16..caa3425e5755 100644
@@ -7202,6 +7202,7 @@ F:	scripts/get_abi.py
 F:	scripts/kernel-doc*
 F:	scripts/lib/abi/*
 F:	scripts/lib/kdoc/*
+F:	tools/net/ynl/pyynl/netlink_yml_parser.py
 F:	scripts/sphinx-pre-install
 X:	Documentation/ABI/
 X:	Documentation/admin-guide/media/
Signature · 1 line
2.49.0
#15 lore raw

PATCH v6 13/15 tools: netlink_yml_parser.py: add line numbers to parsed data

In reply to Mauro Carvalho Chehab

When something goes wrong, we want Sphinx error to point to the right line number from the original source, not from the processed ReST data.

---
 tools/net/ynl/pyynl/lib/doc_generator.py | 34 ++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)
tools/net/ynl/pyynl/lib/doc_generator.py +32 -2
index 866551726723..a9d8ab6f2639 100644
@@ -20,6 +20,16 @@
 from typing import Any, Dict, List
 import yaml
 
+LINE_STR = '__lineno__'
+
+class NumberedSafeLoader(yaml.SafeLoader):
+    """Override the SafeLoader class to add line number to parsed data"""
+
+    def construct_mapping(self, node):
+        mapping = super().construct_mapping(node)
+        mapping[LINE_STR] = node.start_mark.line
+
+        return mapping
 
 class RstFormatters:
     """RST Formatters"""
@@ -127,6 +137,11 @@ class RstFormatters:
         """Return a formatted label"""
         return f".. _{title}:\n\n"
 
+    @staticmethod
+    def rst_lineno(lineno: int) -> str:
+        """Return a lineno comment"""
+        return f".. LINENO {lineno}\n"
+
 class YnlDocGenerator:
     """YAML Netlink specs Parser"""
 
@@ -144,6 +159,9 @@ class YnlDocGenerator:
         """Parse 'do' section and return a formatted string"""
         lines = []
         for key in do_dict.keys():
+            if key == LINE_STR:
+                lines.append(self.fmt.rst_lineno(do_dict[key]))
+                continue
             lines.append(self.fmt.rst_paragraph(self.fmt.bold(key), level + 1))
             if key in ['request', 'reply']:
                 lines.append(self.parse_do_attributes(do_dict[key], level + 1) + "\n")
@@ -174,6 +192,10 @@ class YnlDocGenerator:
             lines.append(self.fmt.rst_paragraph(operation["doc"]) + "\n")
 
             for key in operation.keys():
+                if key == LINE_STR:
+                    lines.append(self.fmt.rst_lineno(operation[key]))
+                    continue
+
                 if key in preprocessed:
                     # Skip the special fields
                     continue
@@ -233,6 +255,9 @@ class YnlDocGenerator:
         for definition in defs:
             lines.append(self.fmt.rst_section(namespace, 'definition', definition["name"]))
             for k in definition.keys():
+                if k == LINE_STR:
+                    lines.append(self.fmt.rst_lineno(definition[k]))
+                    continue
                 if k in preprocessed + ignored:
                     continue
                 lines.append(self.fmt.rst_fields(k, self.fmt.sanitize(definition[k]), 0))
@@ -268,6 +293,9 @@ class YnlDocGenerator:
                 lines.append(self.fmt.rst_subsubsection(attr_line))
 
                 for k in attr.keys():
+                    if k == LINE_STR:
+                        lines.append(self.fmt.rst_lineno(attr[k]))
+                        continue
                     if k in preprocessed + ignored:
                         continue
                     if k in linkable:
@@ -306,6 +334,8 @@ class YnlDocGenerator:
         lines = []
 
         # Main header
+        lineno = obj.get('__lineno__', 0)
+        lines.append(self.fmt.rst_lineno(lineno))
 
         family = obj['name']
 
@@ -354,7 +384,7 @@ class YnlDocGenerator:
     def parse_yaml_file(self, filename: str) -> str:
         """Transform the YAML specified by filename into an RST-formatted string"""
         with open(filename, "r", encoding="utf-8") as spec_file:
-            yaml_data = yaml.safe_load(spec_file)
-            content = self.parse_yaml(yaml_data)
+            numbered_yaml = yaml.load(spec_file, Loader=NumberedSafeLoader)
+            content = self.parse_yaml(numbered_yaml)
 
         return content
Signature · 1 line
2.49.0
#16 lore raw

PATCH v6 14/15 docs: parser_yaml.py: add support for line numbers from the parser

In reply to Mauro Carvalho Chehab

Instead of printing line numbers from the temp converted ReST file, get them from the original source.

---
 Documentation/sphinx/parser_yaml.py      | 12 ++++++++++--
 tools/net/ynl/pyynl/lib/doc_generator.py | 16 ++++++++++++----
 2 files changed, 22 insertions(+), 6 deletions(-)
Documentation/sphinx/parser_yaml.py +10 -2
index 2b2af239a1c2..5360fcfd4fde 100755
@@ -29,6 +29,8 @@ class YamlParser(Parser):
 
     netlink_parser = YnlDocGenerator()
 
+    re_lineno = re.compile(r"\.\. LINENO ([0-9]+)$")
+
     def do_parse(self, inputstring, document, msg):
         """Parse YAML and generate a document tree."""
 
@@ -38,8 +40,14 @@ class YamlParser(Parser):
 
         try:
             # Parse message with RSTParser
-            for i, line in enumerate(msg.split('\n')):
-                result.append(line, document.current_source, i)
+            lineoffset = 0;
+            for line in msg.split('\n'):
+                match = self.re_lineno.match(line)
+                if match:
+                    lineoffset = int(match.group(1))
+                    continue
+
+                result.append(line, document.current_source, lineoffset)
 
             rst_parser = RSTParser()
             rst_parser.parse('\n'.join(result), document)
tools/net/ynl/pyynl/lib/doc_generator.py +12 -4
index a9d8ab6f2639..7f4f98983cdf 100644
@@ -158,9 +158,11 @@ class YnlDocGenerator:
     def parse_do(self, do_dict: Dict[str, Any], level: int = 0) -> str:
         """Parse 'do' section and return a formatted string"""
         lines = []
+        if LINE_STR in do_dict:
+            lines.append(self.fmt.rst_lineno(do_dict[LINE_STR]))
+
         for key in do_dict.keys():
             if key == LINE_STR:
-                lines.append(self.fmt.rst_lineno(do_dict[key]))
                 continue
             lines.append(self.fmt.rst_paragraph(self.fmt.bold(key), level + 1))
             if key in ['request', 'reply']:
@@ -187,13 +189,15 @@ class YnlDocGenerator:
         lines = []
 
         for operation in operations:
+            if LINE_STR in operation:
+                lines.append(self.fmt.rst_lineno(operation[LINE_STR]))
+
             lines.append(self.fmt.rst_section(namespace, 'operation',
                                               operation["name"]))
             lines.append(self.fmt.rst_paragraph(operation["doc"]) + "\n")
 
             for key in operation.keys():
                 if key == LINE_STR:
-                    lines.append(self.fmt.rst_lineno(operation[key]))
                     continue
 
                 if key in preprocessed:
@@ -253,10 +257,12 @@ class YnlDocGenerator:
         lines = []
 
         for definition in defs:
+            if LINE_STR in definition:
+                lines.append(self.fmt.rst_lineno(definition[LINE_STR]))
+
             lines.append(self.fmt.rst_section(namespace, 'definition', definition["name"]))
             for k in definition.keys():
                 if k == LINE_STR:
-                    lines.append(self.fmt.rst_lineno(definition[k]))
                     continue
                 if k in preprocessed + ignored:
                     continue
@@ -284,6 +290,9 @@ class YnlDocGenerator:
             lines.append(self.fmt.rst_section(namespace, 'attribute-set',
                                               entry["name"]))
             for attr in entry["attributes"]:
+                if LINE_STR in attr:
+                    lines.append(self.fmt.rst_lineno(attr[LINE_STR]))
+
                 type_ = attr.get("type")
                 attr_line = attr["name"]
                 if type_:
@@ -294,7 +303,6 @@ class YnlDocGenerator:
 
                 for k in attr.keys():
                     if k == LINE_STR:
-                        lines.append(self.fmt.rst_lineno(attr[k]))
                         continue
                     if k in preprocessed + ignored:
                         continue
Signature · 1 line
2.49.0
#17 lore raw

PATCH v6 15/15 docs: sphinx: add a file with the requirements for lowest version

In reply to Mauro Carvalho Chehab

Those days, it is hard to install a virtual env that would build docs with Sphinx 3.4.3, as even python 3.13 is not compatible anymore with it.

	/usr/bin/python3.9 -m venv sphinx_3.4.3
	. sphinx_3.4.3/bin/activate
	pip install -r Documentation/sphinx/min_requirements.txt
---
 Documentation/doc-guide/sphinx.rst        | 15 +++++++++++++++
 Documentation/sphinx/min_requirements.txt |  8 ++++++++
 2 files changed, 23 insertions(+)
 create mode 100644 Documentation/sphinx/min_requirements.txt
Documentation/doc-guide/sphinx.rst +15 -0
index 5a91df105141..13943eb532ac 100644
@@ -131,6 +131,21 @@ It supports two optional parameters:
 ``--no-virtualenv``
 	Use OS packaging for Sphinx instead of Python virtual environment.
 
+Installing Sphinx Minimal Version
+---------------------------------
+
+When changing Sphinx build system, it is important to ensure that
+the minimal version will still be supported. Nowadays, it is
+becoming harder to do that on modern distributions, as it is not
+possible to install with Python 3.13 and above.
+
+The recommended way is to use the lowest supported Python version
+as defined at Documentation/process/changes.rst, creating
+a venv with it with, and install minimal requirements with::
+
+	/usr/bin/python3.9 -m venv sphinx_min
+	. sphinx_min/bin/activate
+	pip install -r Documentation/sphinx/min_requirements.txt
 
 Sphinx Build
 ============
Documentation/sphinx/min_requirements.txt new file +8 -0
new file mode 100644
index 000000000000..89ea36d5798f
@@ -0,0 +1,8 @@
+Sphinx==3.4.3
+jinja2<3.1
+docutils<0.18
+sphinxcontrib-applehelp==1.0.4
+sphinxcontrib-devhelp==1.0.2
+sphinxcontrib-htmlhelp==2.0.1
+sphinxcontrib-qthelp==1.0.3
+sphinxcontrib-serializinghtml==1.1.5
Signature · 1 line
2.49.0
#2 lore raw

Re: [PATCH v6 01/15] docs: conf.py: properly handle include and exclude patterns

In reply to Mauro Carvalho Chehab
Quoted 54 lines · Mauro Carvalho Chehab

When one does:
make SPHINXDIRS="foo" htmldocs

All patterns would be relative to Documentation/foo, which causes the include/exclude patterns like:

	include_patterns = [
		...
		f'foo/*.{ext}',
	]

to break. This is not what it is expected. Address it by adding a logic to dynamically adjust the pattern when SPHINXDIRS is used.

That allows adding parsers for other file types.

It should be noticed that include_patterns was added on Sphinx 5.1:
https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-include_patterns

So, a backward-compatible code is needed when we start using it for real.

---
 Documentation/conf.py | 67 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 63 insertions(+), 4 deletions(-)
Documentation/conf.py +16 -0
index 12de52a2b17e..4ba4ee45e599 100644
@@ -17,6 +17,66 @@ import os
 import sphinx
 import shutil
 
+# Get Sphinx version
+major, minor, patch = sphinx.version_info[:3]
+
+# Include_patterns were added on Sphinx 5.1
+if (major < 5) or (major == 5 and minor < 1):
+    has_include_patterns = False
+else:
+    has_include_patterns = True
+    # Include patterns that don't contain directory names, in glob format
+    include_patterns = ['**.rst']
+
+# Location of Documentation/ directory
+doctree = os.path.abspath('.')
+
+# Exclude of patterns that don't contain directory names, in glob format.
+exclude_patterns = []

Documentation/conf.py import os · line 45

Quoted 10 lines
Documentation/conf.py +10 -0
+
+# List of patterns that contain directory names in glob format.
+dyn_include_patterns = []
+dyn_exclude_patterns = ['output']
+
+# Properly handle include/exclude patterns
+# ----------------------------------------
+
+def update_patterns(app):
+

PEP-257 says we don't want a line before docstring:

https://peps.python.org/pep-0257/#multi-line-docstrings

#18 lore raw
In reply to Mauro Carvalho Chehab

Hi Mauro,

Quoted 24 lines · Mauro Carvalho Chehab

As discussed at:

   https://lore.kernel.org/all/[email protected]/

changeset f061c9f7d058 ("Documentation: Document each netlink family") added a logic which generates *.rst files inside $(srctree). This is bad when O=<BUILDDIR> is used.

A recent change renamed the yaml files used by Netlink, revealing a bad side effect: as "make cleandocs" don't clean the produced files and symbols appear duplicated for people that don't build the kernel from scratch.

This series adds an yaml parser extension and uses an index file with glob for *. We opted to write such extension in a way that no actual yaml conversion code is inside it. This makes it flexible enough to handle other types of yaml files in the future. The actual yaml conversion logic were placed at netlink_yml_parser.py.

As requested by YNL maintainers, this version has netlink_yml_parser.py inside tools/net/ynl/pyynl/ directory. I don't like mixing libraries with binaries, nor to have Python libraries spread all over the Kernel. IMO, the best is to put all of them on a common place (scripts/lib, python/lib, lib/python, ...) but, as this can be solved later, for now let's keep it this way.

Quoted 8 lines

---

v6:
- YNL doc parser is now at tools/net/ynl/pyynl/lib/doc_generator.py;
- two patches got merged;
- added instructions to test docs with Sphinx 3.4.3 (minimal supported version);
- minor fixes.

Quick tests against Sphinx 3.4.3 using container images based on debian:bullseye and almalinux:9, both of which have 3.4.3 as their distro packages, emits a *bunch* of warnings like the following:

/<srcdir>/Documentation/netlink/specs/conntrack.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/devlink.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/dpll.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/ethtool.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/fou.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") [...]

I suspect there should be a minimal required minimal version of PyYAML.

"pip freeze" based on almalinux:9 says:

    PyYAML==5.4.1

"pip freeze" based on debian:bullseye says:

    PyYAML==5.3.1

What is the minimal required version here?

And if users of those old distros need to manually upgrade PyYAML, why don't you suggest them to upgrade Sphinx as well?

Thanks, Akira

Quoted 5 lines

v5:
- some patch reorg;
- netlink_yml_parser.py is now together with ynl tools;
- minor fixes.

[...]

#19 lore raw

Em Thu, 19 Jun 2025 00:46:15 +0900
Akira Yokosawa <[email protected]> escreveu:

Quoted 40 lines

Hi Mauro,

Quoted 24 lines · Mauro Carvalho Chehab

As discussed at:

   https://lore.kernel.org/all/[email protected]/

changeset f061c9f7d058 ("Documentation: Document each netlink family") added a logic which generates *.rst files inside $(srctree). This is bad when O=<BUILDDIR> is used.

A recent change renamed the yaml files used by Netlink, revealing a bad side effect: as "make cleandocs" don't clean the produced files and symbols appear duplicated for people that don't build the kernel from scratch.

This series adds an yaml parser extension and uses an index file with glob for *. We opted to write such extension in a way that no actual yaml conversion code is inside it. This makes it flexible enough to handle other types of yaml files in the future. The actual yaml conversion logic were placed at netlink_yml_parser.py.

As requested by YNL maintainers, this version has netlink_yml_parser.py inside tools/net/ynl/pyynl/ directory. I don't like mixing libraries with binaries, nor to have Python libraries spread all over the Kernel. IMO, the best is to put all of them on a common place (scripts/lib, python/lib, lib/python, ...) but, as this can be solved later, for now let's keep it this way.

Quoted 8 lines

---

v6:
- YNL doc parser is now at tools/net/ynl/pyynl/lib/doc_generator.py;
- two patches got merged;
- added instructions to test docs with Sphinx 3.4.3 (minimal supported version);
- minor fixes.

Quick tests against Sphinx 3.4.3 using container images based on debian:bullseye and almalinux:9, both of which have 3.4.3 as their distro packages, emits a *bunch* of warnings like the following:

Quoted 8 lines

/<srcdir>/Documentation/netlink/specs/conntrack.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/devlink.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/dpll.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/ethtool.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/fou.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") [...]

I suspect there should be a minimal required minimal version of PyYAML.

Likely yes. From my side, I didn't change anything related to PyYAML, except by adding a loader at the latest patch to add line numbers.

The above warnings don't seem related. So, probably this was already an issue.

Funny enough, I did, on my venv:

	$ pip install PyYAML==5.1
	$ tools/net/ynl/pyynl/ynl_gen_rst.py -i Documentation/netlink/specs/dpll.yaml -o Documentation/output/netlink/specs/dpll.rst -v
	...
	$ make clean; make SPHINXDIRS="netlink/specs" htmldocs
	...

but didn't get any issue (I have a later version installed outside venv - not sure it it will do the right thing).

That's what I have at venv:

----------------------------- ---------
Package Version
----------------------------- ---------

alabaster                     0.7.13
babel                         2.17.0
certifi                       2025.6.15
charset-normalizer            3.4.2
docutils                      0.17.1
idna                          3.10
imagesize                     1.4.1
Jinja2                        2.8.1
MarkupSafe                    1.1.1
packaging                     25.0
pip                           25.1.1
Pygments                      2.19.1
PyYAML                        5.1
requests                      2.32.4
setuptools                    80.1.0
snowballstemmer               3.0.1
Sphinx                        3.4.3
sphinxcontrib-applehelp       1.0.4
sphinxcontrib-devhelp         1.0.2
sphinxcontrib-htmlhelp        2.0.1
sphinxcontrib-jsmath          1.0.1
sphinxcontrib-qthelp          1.0.3

sphinxcontrib-serializinghtml 1.1.5
urllib3 2.4.0
----------------------------- ---------

Quoted 9 lines

"pip freeze" based on almalinux:9 says:

    PyYAML==5.4.1

"pip freeze" based on debian:bullseye says:

    PyYAML==5.3.1

What is the minimal required version here?

Breno, what's the minimal version? Please update requirements.txt to ensure that, and modify ./scripts/sphinx-pre-install to check for it.

Quoted 3 lines

And if users of those old distros need to manually upgrade PyYAML, why don't you suggest them to upgrade Sphinx as well?

The criteria we used to define minimal version for python/sphinx was having them released at the end of 2020/beginning 2021. So, up to ~4 years old. We also double-checked latest LTS versions from major distros.

With that, PyYAML 5.4.1 met the ~4 years old, and so 5.3.1 and 5.1.

funny enough:

	$ git grep tab_width Documentation/netlink/

doesn't return anything. Yet, tab_width is used by sphinx extensions. The in-kernel ones do it the right way using get:

tab_width = self.options.get('tab-width',
self.state.document.settings.tab_width)

But perhaps some other extension you might have installed on your environment has issues, or maybe Documentation/sphinx/parser_yaml.py need to expand tabs with certain versions of docutils.

Please compare the versions that you're using on your test environment with the ones I used here.

Regards,
Mauro

#3 lore raw

Re: [PATCH v6 01/15] docs: conf.py: properly handle include and exclude patterns

In reply to Breno Leitao

Em Wed, 18 Jun 2025 08:42:51 -0700
Breno Leitao <[email protected]> escreveu:

Quoted 68 lines · Mauro Carvalho Chehab
Quoted 54 lines

When one does:
make SPHINXDIRS="foo" htmldocs

All patterns would be relative to Documentation/foo, which causes the include/exclude patterns like:

	include_patterns = [
		...
		f'foo/*.{ext}',
	]

to break. This is not what it is expected. Address it by adding a logic to dynamically adjust the pattern when SPHINXDIRS is used.

That allows adding parsers for other file types.

It should be noticed that include_patterns was added on Sphinx 5.1:
https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-include_patterns

So, a backward-compatible code is needed when we start using it for real.

---
 Documentation/conf.py | 67 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 63 insertions(+), 4 deletions(-)
Documentation/conf.py +16 -0
index 12de52a2b17e..4ba4ee45e599 100644
@@ -17,6 +17,66 @@ import os
 import sphinx
 import shutil
 
+# Get Sphinx version
+major, minor, patch = sphinx.version_info[:3]
+
+# Include_patterns were added on Sphinx 5.1
+if (major < 5) or (major == 5 and minor < 1):
+    has_include_patterns = False
+else:
+    has_include_patterns = True
+    # Include patterns that don't contain directory names, in glob format
+    include_patterns = ['**.rst']
+
+# Location of Documentation/ directory
+doctree = os.path.abspath('.')
+
+# Exclude of patterns that don't contain directory names, in glob format.
+exclude_patterns = []

Documentation/conf.py import os · line 45

Quoted 10 lines
Documentation/conf.py +10 -0
+
+# List of patterns that contain directory names in glob format.
+dyn_include_patterns = []
+dyn_exclude_patterns = ['output']
+
+# Properly handle include/exclude patterns
+# ----------------------------------------
+
+def update_patterns(app):
+  

PEP-257 says we don't want a line before docstring:

Quoted 1 line

https://peps.python.org/pep-0257/#multi-line-docstrings

True, but:

$ pylint Documentation/conf.py 
************* Module conf
Documentation/conf.py:357:0: W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
Documentation/conf.py:587:0: W0311: Bad indentation. Found 1 spaces, expected 4 (bad-indentation)
Documentation/conf.py:567:1: W0511: FIXME: Do not add the index file here; the result will be too big. Adding (fixme)
Documentation/conf.py:1:0: C0114: Missing module docstring (missing-module-docstring)
Documentation/conf.py:229:0: W0622: Redefining built-in 'copyright' (redefined-builtin)
Documentation/conf.py:21:22: I1101: Module 'sphinx' has no 'version_info' member, but source is unavailable. Consider adding this module to extension-pkg-allow-list if you want to perform analysis based on run-time introspection of living objects. (c-extension-no-member)
Documentation/conf.py:25:4: C0103: Constant name "has_include_patterns" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:27:4: C0103: Constant name "has_include_patterns" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:65:4: W0612: Unused variable 'sourcedir' (unused-variable)
Documentation/conf.py:66:4: W0612: Unused variable 'builddir' (unused-variable)
Documentation/conf.py:104:0: E0401: Unable to import 'load_config' (import-error)
Documentation/conf.py:104:0: C0413: Import "from load_config import loadConfig" should be placed at the top of the module (wrong-import-position)
Documentation/conf.py:109:0: C0103: Constant name "needs_sphinx" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:186:0: C0103: Constant name "autosectionlabel_prefix_document" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:187:0: C0103: Constant name "autosectionlabel_maxdepth" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:200:8: C0103: Constant name "load_imgmath" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:202:8: C0103: Constant name "load_imgmath" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:204:25: C0209: Formatting a regular string which could be an f-string (consider-using-f-string)
Documentation/conf.py:208:4: C0103: Constant name "math_renderer" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:210:4: C0103: Constant name "math_renderer" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:225:0: C0103: Constant name "master_doc" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:228:0: C0103: Constant name "project" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:229:0: C0103: Constant name "copyright" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:230:0: C0103: Constant name "author" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:253:0: W0702: No exception type(s) specified (bare-except)
Documentation/conf.py:243:4: C0103: Constant name "makefile_version" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:244:4: C0103: Constant name "makefile_patchlevel" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:245:16: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
Documentation/conf.py:245:16: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
Documentation/conf.py:259:8: C0103: Constant name "version" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:259:18: C0103: Constant name "release" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:266:0: C0116: Missing function or method docstring (missing-function-docstring)
Documentation/conf.py:284:0: C0103: Constant name "language" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:308:0: C0103: Constant name "pygments_style" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:317:0: C0103: Constant name "todo_include_todos" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:319:0: C0103: Constant name "primary_domain" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:320:0: C0103: Constant name "highlight_language" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:328:0: C0103: Constant name "html_theme" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:334:3: R1714: Consider merging these comparisons with 'in' by using 'html_theme in ('sphinx_rtd_theme', 'sphinx_rtd_dark_mode')'. Use a set instead if elements are hashable. (consider-using-in)
Documentation/conf.py:353:16: W0104: Statement seems to have no effect (pointless-statement)
Documentation/conf.py:364:8: C0103: Constant name "html_theme" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:382:17: C0209: Formatting a regular string which could be an f-string (consider-using-f-string)
Documentation/conf.py:392:0: C0103: Constant name "smartquotes_action" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:404:0: C0103: Constant name "html_logo" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:407:0: C0103: Constant name "htmlhelp_basename" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:487:8: C0103: Constant name "has" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:490:16: C0103: Constant name "has" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:494:36: C0209: Formatting a regular string which could be an f-string (consider-using-f-string)
Documentation/conf.py:551:0: C0103: Constant name "epub_title" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:552:0: C0103: Constant name "epub_author" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:553:0: C0103: Constant name "epub_publisher" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:554:0: C0103: Constant name "epub_copyright" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:571:29: W1406: The u prefix for strings is no longer necessary in Python >=3.0 (redundant-u-string-prefix)
Documentation/conf.py:571:40: W1406: The u prefix for strings is no longer necessary in Python >=3.0 (redundant-u-string-prefix)
Documentation/conf.py:571:51: W1406: The u prefix for strings is no longer necessary in Python >=3.0 (redundant-u-string-prefix)
Documentation/conf.py:577:0: C0103: Constant name "kerneldoc_bin" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:578:0: C0103: Constant name "kerneldoc_srctree" doesn't conform to UPPER_CASE naming style (invalid-name)
Documentation/conf.py:586:0: C0116: Missing function or method docstring (missing-function-docstring)
Documentation/conf.py:18:0: C0411: standard import "shutil" should be placed before third party import "sphinx" (wrong-import-order)
Documentation/conf.py:350:16: W0611: Unused import sphinx_rtd_dark_mode (unused-import)

This file needs a major cleanup, as it is currently not following any Python code style, and still has some Phython 2.x legacy coding styles.

Perhaps it is time to take some care of it and on other sphinx/*.py files that aren't compliant ;-)

Thanks,
Mauro

#20 lore raw
In reply to Mauro Carvalho Chehab
Quoted 64 lines · Mauro Carvalho Chehab

Em Thu, 19 Jun 2025 00:46:15 +0900
Akira Yokosawa <[email protected]> escreveu:

Quoted 4 lines

Quick tests against Sphinx 3.4.3 using container images based on debian:bullseye and almalinux:9, both of which have 3.4.3 as their distro packages, emits a *bunch* of warnings like the following:

Quoted 8 lines

/<srcdir>/Documentation/netlink/specs/conntrack.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/devlink.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/dpll.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/ethtool.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/fou.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") [...]

I suspect there should be a minimal required minimal version of PyYAML.

Likely yes. From my side, I didn't change anything related to PyYAML, except by adding a loader at the latest patch to add line numbers.

The above warnings don't seem related. So, probably this was already an issue.

Funny enough, I did, on my venv:

	$ pip install PyYAML==5.1
	$ tools/net/ynl/pyynl/ynl_gen_rst.py -i Documentation/netlink/specs/dpll.yaml -o Documentation/output/netlink/specs/dpll.rst -v
	...
	$ make clean; make SPHINXDIRS="netlink/specs" htmldocs
	...

but didn't get any issue (I have a later version installed outside venv - not sure it it will do the right thing).

That's what I have at venv:

----------------------------- ---------
Package Version
----------------------------- ---------

alabaster                     0.7.13
babel                         2.17.0
certifi                       2025.6.15
charset-normalizer            3.4.2
docutils                      0.17.1
idna                          3.10
imagesize                     1.4.1
Jinja2                        2.8.1
MarkupSafe                    1.1.1
packaging                     25.0
pip                           25.1.1
Pygments                      2.19.1
PyYAML                        5.1
requests                      2.32.4
setuptools                    80.1.0
snowballstemmer               3.0.1
Sphinx                        3.4.3
sphinxcontrib-applehelp       1.0.4
sphinxcontrib-devhelp         1.0.2
sphinxcontrib-htmlhelp        2.0.1
sphinxcontrib-jsmath          1.0.1
sphinxcontrib-qthelp          1.0.3

sphinxcontrib-serializinghtml 1.1.5
urllib3 2.4.0
----------------------------- ---------

[...]

Quoted 2 lines

Please compare the versions that you're using on your test environment with the ones I used here.

It looks to me like the minimal required version of docutils is 0.17.1 for PyYAML integration. Both almalinux:9 and debian:11 have 0.16.

Sphinx 4.3.2 of Ubuntu 22.04 comes with docutils 0.17.1, and it is free of the warnings from PyYAML.

Thanks, Akira

#21 lore raw

Em Thu, 19 Jun 2025 10:34:59 +0900
Akira Yokosawa <[email protected]> escreveu:

Quoted 67 lines · Mauro Carvalho Chehab
Quoted 64 lines

Em Thu, 19 Jun 2025 00:46:15 +0900
Akira Yokosawa <[email protected]> escreveu:

Quoted 4 lines

Quick tests against Sphinx 3.4.3 using container images based on debian:bullseye and almalinux:9, both of which have 3.4.3 as their distro packages, emits a *bunch* of warnings like the following:

Quoted 8 lines

/<srcdir>/Documentation/netlink/specs/conntrack.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/devlink.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/dpll.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/ethtool.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") /<srcdir>/Documentation/netlink/specs/fou.yaml:: WARNING: YAML parsing error: AttributeError("'Values' object has no attribute 'tab_width'") [...]

I suspect there should be a minimal required minimal version of PyYAML.

Likely yes. From my side, I didn't change anything related to PyYAML, except by adding a loader at the latest patch to add line numbers.

The above warnings don't seem related. So, probably this was already an issue.

Funny enough, I did, on my venv:

	$ pip install PyYAML==5.1
	$ tools/net/ynl/pyynl/ynl_gen_rst.py -i Documentation/netlink/specs/dpll.yaml -o Documentation/output/netlink/specs/dpll.rst -v
	...
	$ make clean; make SPHINXDIRS="netlink/specs" htmldocs
	...

but didn't get any issue (I have a later version installed outside venv - not sure it it will do the right thing).

That's what I have at venv:

----------------------------- ---------
Package Version
----------------------------- ---------

alabaster                     0.7.13
babel                         2.17.0
certifi                       2025.6.15
charset-normalizer            3.4.2
docutils                      0.17.1
idna                          3.10
imagesize                     1.4.1
Jinja2                        2.8.1
MarkupSafe                    1.1.1
packaging                     25.0
pip                           25.1.1
Pygments                      2.19.1
PyYAML                        5.1
requests                      2.32.4
setuptools                    80.1.0
snowballstemmer               3.0.1
Sphinx                        3.4.3
sphinxcontrib-applehelp       1.0.4
sphinxcontrib-devhelp         1.0.2
sphinxcontrib-htmlhelp        2.0.1
sphinxcontrib-jsmath          1.0.1
sphinxcontrib-qthelp          1.0.3

sphinxcontrib-serializinghtml 1.1.5
urllib3 2.4.0
----------------------------- ---------

[...]

Quoted 8 lines
Quoted 2 lines

Please compare the versions that you're using on your test environment with the ones I used here.

It looks to me like the minimal required version of docutils is 0.17.1 for PyYAML integration. Both almalinux:9 and debian:11 have 0.16.

Sphinx 4.3.2 of Ubuntu 22.04 comes with docutils 0.17.1, and it is free of the warnings from PyYAML.

Yes, it seems so. As I commented on my past e-mail, I think we need a validation logic that will warn if versions are incompatible. Using the experimental checks you and me did, and checking the minimal version on Sphinx release notes (*), it seems to be that a good start point is this:

            ========  ============  ============
            Sphinx    Min Docutils  Max Docutils
            Version   Version       Version
            --------  ------------  ------------
            < 4.0.0   0.17.1        0.17.1
            < 6.0.0   0.17.1        0.18.1
            < 7.0.0   0.18.0        0.18.1
            >= 7.0.0  0.20.0        0.21.2
            ========  ============  ============

Eventually, we may need to blacklist or whitelist other combinations, but this would require a lot of time.

(*) I asked a LLM AI to check Sphinx release notes and docutils
versions at the time Sphinx versions were released to aid creating such table. I also added your feedback about docutils 0.19 and your and my tests with docutils < 0.17.1.

Thanks,
Mauro