Skip to contentSkip to conversation

xen/riscv: introduce p2m functionality

PATCH Superseded Oleksii Kurochko 3 participants 84 messages Jul 31, 2025 – Aug 22, 2025 RISC-V

v3 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#1 lore raw

PATCH v3 1/20 xen/riscv: implement sbi_remote_hfence_gvma()

In reply to Oleksii Kurochko

Instruct the remote harts to execute one or more HFENCE.GVMA instructions, covering the range of guest physical addresses between start_addr and start_addr + size for all VMIDs.

The remote fence operation applies to the entire address space if either:
- start_addr and size are both 0, or
- size is equal to 2^XLEN-1.

---
Changes in V3:
- Update the comment message above declaration of sbi_remote_hfence_gvma() and update the commit message in sync.
- Drop ASSERT() in sbi_remote_hfence_gvma().

---
 xen/arch/riscv/include/asm/sbi.h | 19 +++++++++++++++++++
 xen/arch/riscv/sbi.c             |  7 +++++++
 2 files changed, 26 insertions(+)
xen/arch/riscv/include/asm/sbi.h +19 -0
index 527d773277..0277aab747 100644
@@ -89,6 +89,25 @@ bool sbi_has_rfence(void);
 int sbi_remote_sfence_vma(const cpumask_t *cpu_mask, vaddr_t start,
                           size_t size);
 
+/*
+ * Instructs the remote harts to execute one or more HFENCE.GVMA
+ * instructions, covering the range of guest physical addresses
+ * between start_addr and start_addr + size for all VMIDs.
+ *
+ * Returns 0 if IPI was sent to all the targeted harts successfully
+ * or negative value if start_addr or size is not valid.
+ *
+ * The remote fence operation applies to the entire address space if either:
+ *  - start_addr and size are both 0, or
+ *  - size is equal to 2^XLEN-1.
+ *
+ * @cpu_mask a cpu mask containing all the target CPUs (in Xen space).
+ * @param start virtual address start
+ * @param size virtual address range size
+ */
+int sbi_remote_hfence_gvma(const cpumask_t *cpu_mask, vaddr_t start,
+                           size_t size);
+
 /*
  * Initialize SBI library
  *
xen/arch/riscv/sbi.c +7 -0
index 4209520389..1809f614c5 100644
@@ -258,6 +258,13 @@ int sbi_remote_sfence_vma(const cpumask_t *cpu_mask, vaddr_t start,
                       cpu_mask, start, size, 0, 0);
 }
 
+int sbi_remote_hfence_gvma(const cpumask_t *cpu_mask, vaddr_t start,
+                           size_t size)
+{
+    return sbi_rfence(SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA,
+                      cpu_mask, start, size, 0, 0);
+}
+
 /* This function must always succeed. */
 #define sbi_get_spec_version()  \
     sbi_ext_base_func(SBI_EXT_BASE_GET_SPEC_VERSION)
Signature · 1 line
2.50.1
#5 lore raw

PATCH v3 2/20 xen/riscv: introduce sbi_remote_hfence_gvma_vmid()

In reply to Oleksii Kurochko

It instructs the remote harts to execute one or more HFENCE.GVMA instructions by making an SBI call, covering the range of guest physical addresses between start_addr and start_addr + size only for the given VMID.

The remote fence operation applies to the entire address space if either:
- start_addr and size are both 0, or
- size is equal to 2^XLEN-1.

---
Changes in V3:
- Drop ASSERT() in sbi_remote_hfence_gvma_vmid() as failure will happen anyway if rfence isn't initialized.
- Drop "This function call is only valid for harts implementing hypervisor extension." from the commit message and the comment above the declaration of sbi_remote_hfence_gvma_vmid().
- Use proper FID for sbi_remote_hfence_gvma_vmid().
---
Changes in V2:
- New patch.

---
 xen/arch/riscv/include/asm/sbi.h | 13 +++++++++++++
 xen/arch/riscv/sbi.c             |  7 +++++++
 2 files changed, 20 insertions(+)
xen/arch/riscv/include/asm/sbi.h +13 -0
index 0277aab747..10930dea93 100644
@@ -108,6 +108,19 @@ int sbi_remote_sfence_vma(const cpumask_t *cpu_mask, vaddr_t start,
 int sbi_remote_hfence_gvma(const cpumask_t *cpu_mask, vaddr_t start,
                            size_t size);
 
+/*
+ * Instruct the remote harts to execute one or more HFENCE.GVMA instructions,
+ * covering the range of guest physical addresses between start_addr and
+ * start_addr + size only for the given VMID.
+ *
+ * @cpu_mask a cpu mask containing all the target CPUs (in Xen space).
+ * @param start virtual address start
+ * @param size virtual address range size
+ * @param vmid virtual machine id
+ */
+int sbi_remote_hfence_gvma_vmid(const cpumask_t *cpu_mask, vaddr_t start,
+                                size_t size, unsigned long vmid);
+
 /*
  * Initialize SBI library
  *
xen/arch/riscv/sbi.c +7 -0
index 1809f614c5..425dce44c6 100644
@@ -265,6 +265,13 @@ int sbi_remote_hfence_gvma(const cpumask_t *cpu_mask, vaddr_t start,
                       cpu_mask, start, size, 0, 0);
 }
 
+int sbi_remote_hfence_gvma_vmid(const cpumask_t *cpu_mask, vaddr_t start,
+                                size_t size, unsigned long vmid)
+{
+    return sbi_rfence(SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID,
+                      cpu_mask, start, size, vmid, 0);
+}
+
 /* This function must always succeed. */
 #define sbi_get_spec_version()  \
     sbi_ext_base_func(SBI_EXT_BASE_GET_SPEC_VERSION)
Signature · 1 line
2.50.1
#0 lore raw

v3 cover xen/riscv: introduce p2m functionality

In this patch series are introduced necessary functions to build and manage RISC-V guest page tables and MMIO/RAM mappings.

---
Changes in V3:
- Introduce metadata table to store P2M types.
- Use x86's way to allocate VMID.
- Abstract Arm-specific p2m type name for device MMIO mappings.
- All other updates please look at specific patch.
---
Changes in V2:
- Merged to staging:
- [PATCH v1 1/6] xen/riscv: add inclusion of xen/bitops.h to asm/cmpxchg.h
- New patches:
- xen/riscv: implement sbi_remote_hfence_gvma{_vmid}().
- Split patch "xen/riscv: implement p2m mapping functionality" into smaller one patches:
- xen/riscv: introduce page_set_xenheap_gfn()
- xen/riscv: implement guest_physmap_add_entry() for mapping GFNs to MFNs
- xen/riscv: implement p2m_set_entry() and __p2m_set_entry()
- xen/riscv: Implement p2m_free_entry() and related helpers
- xen/riscv: Implement superpage splitting for p2m mappings
- xen/riscv: implement p2m_next_level()
- xen/riscv: Implement p2m_entry_from_mfn() and support PBMT configuration
- Move root p2m table allocation to separate patch:
xen/riscv: add root page table allocation
- Drop dependency of this patch series from the patch witn an introduction of SvPBMT as it was merged.
- Patch "[PATCH v1 4/6] xen/riscv: define pt_t and pt_walk_t structures" was renamed to xen/riscv: introduce pte_{set,get}_mfn() as after dropping of bitfields for PTE structure, this patch introduce only pte_{set,get}_mfn().
- Rename "xen/riscv: define pt_t and pt_walk_t structures" to "xen/riscv: introduce pte_{set,get}_mfn()" as pt_t and pt_walk_t were dropped.
- Introduce guest domain's VMID allocation and manegement.
- Add patches necessary to implement p2m lookup:
- xen/riscv: implement mfn_valid() and page reference, ownership handling helpers
- xen/riscv: add support of page lookup by GFN
- Re-sort patch series.
- All other changes are patch-specific. Please check them.
---

Oleksii Kurochko (20):
xen/riscv: implement sbi_remote_hfence_gvma()
xen/riscv: introduce sbi_remote_hfence_gvma_vmid() xen/riscv: introduce VMID allocation and manegement xen/riscv: introduce things necessary for p2m initialization xen/riscv: construct the P2M pages pool for guests xen/riscv: add root page table allocation
xen/riscv: introduce pte_{set,get}_mfn()
xen/riscv: add new p2m types and helper macros for type classification xen/dom0less: abstract Arm-specific p2m type name for device MMIO
mappings
xen/riscv: introduce page_{get,set}_xenheap_gfn() xen/riscv: implement function to map memory in guest p2m xen/riscv: implement p2m_set_range()
xen/riscv: Implement p2m_free_subtree() and related helpers xen/riscv: Implement p2m_pte_from_mfn() and support PBMT configuration xen/riscv: implement p2m_next_level()
xen/riscv: Implement superpage splitting for p2m mappings xen/riscv: implement put_page()
xen/riscv: implement mfn_valid() and page reference, ownership
handling helpers
xen/riscv: add support of page lookup by GFN
xen/riscv: introduce metadata table to store P2M type

 xen/arch/arm/include/asm/p2m.h              |    2 +
 xen/arch/riscv/Makefile                     |    3 +
 xen/arch/riscv/include/asm/Makefile         |    1 -
 xen/arch/riscv/include/asm/domain.h         |   23 +
 xen/arch/riscv/include/asm/flushtlb.h       |    5 +
 xen/arch/riscv/include/asm/mm.h             |   72 +-
 xen/arch/riscv/include/asm/p2m.h            |  145 ++-
 xen/arch/riscv/include/asm/page.h           |   38 +
 xen/arch/riscv/include/asm/paging.h         |   19 +
 xen/arch/riscv/include/asm/riscv_encoding.h |    6 +
 xen/arch/riscv/include/asm/sbi.h            |   32 +
 xen/arch/riscv/include/asm/vmid.h           |    8 +
 xen/arch/riscv/mm.c                         |   73 +-
 xen/arch/riscv/p2m.c                        | 1107 +++++++++++++++++++
 xen/arch/riscv/paging.c                     |  112 ++
 xen/arch/riscv/sbi.c                        |   14 +
 xen/arch/riscv/setup.c                      |    3 +
 xen/arch/riscv/vmid.c                       |  165 +++
 xen/common/device-tree/dom0less-build.c     |    2 +-
 19 files changed, 1809 insertions(+), 21 deletions(-)
 create mode 100644 xen/arch/riscv/include/asm/paging.h
 create mode 100644 xen/arch/riscv/include/asm/vmid.h
 create mode 100644 xen/arch/riscv/p2m.c
 create mode 100644 xen/arch/riscv/paging.c
 create mode 100644 xen/arch/riscv/vmid.c
Signature · 1 line
2.50.1
#17 lore raw

PATCH v3 4/20 xen/riscv: introduce things necessary for p2m initialization

Introduce the following things:
- Update p2m_domain structure, which describe per p2m-table state, with:
- lock to protect updates to p2m.
- pool with pages used to construct p2m.
- clean_pte which indicate if it is requires to clean the cache when writing an entry.
- back pointer to domain structure.
- p2m_init() to initalize members introduced in p2m_domain structure.
- Call of paging_domain_init() in p2m_init() to initlize paging spinlock and freelist head.

---
Changes in V3:
- s/p2m_type/p2m_types.
- Drop init. of p2m->clean_pte in p2m_init() as CONFIG_HAS_PASSTHROUGH is going to be selected unconditionaly. Plus CONFIG_HAS_PASSTHROUGH isn't ready to be used for RISC-V.
Add compilation error to not forget to init p2m->clean_pte.
- Move defintion of p2m->domain up in p2m_init().
- Add iommu_use_hap_pt() when p2m->clean_pte is initialized.
- Add the comment above p2m_types member of p2m_domain struct.
- Add need_flush member to p2m_domain structure.
- Move introduction of p2m_write_(un)lock() and p2m_tlb_flush_sync() to the patch where they are really used:
xen/riscv: implement guest_physmap_add_entry() for mapping GFNs to MFN
- Add p2m member to arch_domain structure.
- Drop p2m_types from struct p2m_domain as P2M type for PTE will be stored differently.
- Drop default_access as it isn't going to be used for now.
- Move defintion of p2m_is_write_locked() to "implement function to map memory in guest p2m" where it is really used.
---
Changes in V2:
- Use introduced erlier sbi_remote_hfence_gvma_vmid() for proper implementation of p2m_force_tlb_flush_sync() as TLB flushing needs to happen for each pCPU which potentially has cached a mapping, what is tracked by d->dirty_cpumask.
- Drop unnecessary blanks.
- Fix code style for # of pre-processor directive.
- Drop max_mapped_gfn and lowest_mapped_gfn as they aren't used now.
- [p2m_init()] Set p2m->clean_pte=false if CONFIG_HAS_PASSTHROUGH=n.
- [p2m_init()] Update the comment above p2m->domain = d;
- Drop p2m->need_flush as it seems to be always true for RISC-V and as a consequence drop p2m_tlb_flush_sync().
- Move to separate patch an introduction of root page table allocation.

---
 xen/arch/riscv/Makefile             |  1 +
 xen/arch/riscv/include/asm/domain.h |  5 +++++
 xen/arch/riscv/include/asm/p2m.h    | 34 +++++++++++++++++++++++++++++
 xen/arch/riscv/p2m.c                | 32 +++++++++++++++++++++++++++
 4 files changed, 72 insertions(+)
 create mode 100644 xen/arch/riscv/p2m.c
xen/arch/riscv/Makefile +1 -0
index 745a85e116..e2499210c8 100644
@@ -7,6 +7,7 @@ obj-y += intc.o
 obj-y += irq.o
 obj-y += mm.o
 obj-y += pt.o
+obj-y += p2m.o
 obj-$(CONFIG_RISCV_64) += riscv64/
 obj-y += sbi.o
 obj-y += setup.o
xen/arch/riscv/include/asm/domain.h +5 -0
index aac1040658..e688980efa 100644
@@ -5,6 +5,8 @@
 #include <xen/xmalloc.h>
 #include <public/hvm/params.h>
 
+#include <asm/p2m.h>
+
 struct vcpu_vmid {
     uint64_t generation;
     uint16_t vmid;
@@ -24,6 +26,9 @@ struct arch_vcpu {
 
 struct arch_domain {
     struct hvm_domain hvm;
+
+    /* Virtual MMU */
+    struct p2m_domain p2m;
 };
 
 #include <xen/sched.h>
xen/arch/riscv/include/asm/p2m.h +34 -0
index 28f57a74f2..f8051ed893 100644
@@ -3,11 +3,45 @@
 #define ASM__RISCV__P2M_H
 
 #include <xen/errno.h>
+#include <xen/mm.h>
+#include <xen/rwlock.h>
+#include <xen/types.h>
 
 #include <asm/page-bits.h>
 
 #define paddr_bits PADDR_BITS
 
+/* Get host p2m table */
+#define p2m_get_hostp2m(d) (&(d)->arch.p2m)
+
+/* Per-p2m-table state */
+struct p2m_domain {
+    /*
+     * Lock that protects updates to the p2m.
+     */
+    rwlock_t lock;
+
+    /* Pages used to construct the p2m */
+    struct page_list_head pages;
+
+    /* Indicate if it is required to clean the cache when writing an entry */
+    bool clean_pte;
+
+    /* Back pointer to domain */
+    struct domain *domain;
+
+    /*
+     * P2M updates may required TLBs to be flushed (invalidated).
+     *
+     * Flushes may be deferred by setting 'need_flush' and then flushing
+     * when the p2m write lock is released.
+     *
+     * If an immediate flush is required (e.g, if a super page is
+     * shattered), call p2m_tlb_flush_sync().
+     */
+    bool need_flush;
+};
+
 /*
  * List of possible type for each page in the p2m entry.
  * The number of available bit per page in the pte for this purpose is 2 bits.
xen/arch/riscv/p2m.c new file +32 -0
new file mode 100644
index 0000000000..ae937e9bdd
@@ -0,0 +1,32 @@
+#include <xen/mm.h>
+#include <xen/rwlock.h>
+#include <xen/sched.h>
+
+int p2m_init(struct domain *d)
+{
+    struct p2m_domain *p2m = p2m_get_hostp2m(d);
+
+    /*
+     * "Trivial" initialisation is now complete.  Set the backpointer so the
+     * users of p2m could get an access to domain structure.
+     */
+    p2m->domain = d;
+
+    rwlock_init(&p2m->lock);
+    INIT_PAGE_LIST_HEAD(&p2m->pages);
+
+    /*
+     * Currently, the infrastructure required to enable CONFIG_HAS_PASSTHROUGH
+     * is not ready for RISC-V support.
+     *
+     * When CONFIG_HAS_PASSTHROUGH=y, p2m->clean_pte must be properly
+     * initialized.
+     * At the moment, it defaults to false because the p2m structure is
+     * zero-initialized.
+     */
+#ifdef CONFIG_HAS_PASSTHROUGH
+#   error "Add init of p2m->clean_pte"
+#endif
+
+    return 0;
+}
Signature · 1 line
2.50.1
#8 lore raw

PATCH v3 3/20 xen/riscv: introduce VMID allocation and manegement

In reply to Oleksii Kurochko

Current implementation is based on x86's way to allocate VMIDs:
VMIDs partition the physical TLB. In the current implementation VMIDs are introduced to reduce the number of TLB flushes. Each time the guest's virtual address space changes, instead of flushing the TLB, a new VMID is assigned. This reduces the number of TLB flushes to at most 1/#VMIDs. The biggest advantage is that hot parts of the hypervisor's code and data retain in the TLB.

VMIDs are a hart-local resource. As preemption of VMIDs is not possible, VMIDs are assigned in a round-robin scheme. To minimize the overhead of VMID invalidation, at the time of a TLB flush, VMIDs are tagged with a 64-bit generation. Only on a generation overflow the code needs to invalidate all VMID information stored at the VCPUs with are run on the specific physical processor. This overflow appears after about 2^80 host processor cycles, so we do not optimize this case, but simply disable VMID useage to retain correctness.

Only minor changes are made compared to the x86 implementation. These include using RISC-V-specific terminology, adding a check to ensure the type used for storing the VMID has enough bits to hold VMIDLEN, and introducing a new function vmidlen_detect() to clarify the VMIDLEN value.

---
Changes in V3:
- Reimplemnt VMID allocation similar to what x86 has implemented.
---
Changes in V2:
- New patch.

---
 xen/arch/riscv/Makefile               |   1 +
 xen/arch/riscv/include/asm/domain.h   |   6 +
 xen/arch/riscv/include/asm/flushtlb.h |   5 +
 xen/arch/riscv/include/asm/vmid.h     |   8 ++
 xen/arch/riscv/setup.c                |   3 +
 xen/arch/riscv/vmid.c                 | 165 ++++++++++++++++++++++++++
 6 files changed, 188 insertions(+)
 create mode 100644 xen/arch/riscv/include/asm/vmid.h
 create mode 100644 xen/arch/riscv/vmid.c
xen/arch/riscv/Makefile +1 -0
index e2b8aa42c8..745a85e116 100644
@@ -16,6 +16,7 @@ obj-y += smpboot.o
 obj-y += stubs.o
 obj-y += time.o
 obj-y += traps.o
+obj-y += vmid.o
 obj-y += vm_event.o
 
 $(TARGET): $(TARGET)-syms
xen/arch/riscv/include/asm/domain.h +6 -0
index c3d965a559..aac1040658 100644
@@ -5,6 +5,11 @@
 #include <xen/xmalloc.h>
 #include <public/hvm/params.h>
 
+struct vcpu_vmid {
+    uint64_t generation;
+    uint16_t vmid;
+};
+
 struct hvm_domain
 {
     uint64_t              params[HVM_NR_PARAMS];
@@ -14,6 +19,7 @@ struct arch_vcpu_io {
 };
 
 struct arch_vcpu {
+    struct vcpu_vmid vmid;
 };
 
 struct arch_domain {
xen/arch/riscv/include/asm/flushtlb.h +5 -0
index 51c8f753c5..f391ae6eb7 100644
@@ -7,6 +7,11 @@
 
 #include <asm/sbi.h>
 
+static inline void local_hfence_gvma_all(void)
+{
+    asm volatile ( "hfence.gvma zero, zero" ::: "memory" );
+}
+
 /* Flush TLB of local processor for address va. */
 static inline void flush_tlb_one_local(vaddr_t va)
 {
xen/arch/riscv/include/asm/vmid.h new file +8 -0
new file mode 100644
index 0000000000..2f1f7ec9a2
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef ASM_RISCV_VMID_H
+#define ASM_RISCV_VMID_H
+
+void vmid_init(void);
+
+#endif /* ASM_RISCV_VMID_H */
xen/arch/riscv/setup.c +3 -0
index 483cdd7e17..549228d73f 100644
@@ -25,6 +25,7 @@
 #include <asm/sbi.h>
 #include <asm/setup.h>
 #include <asm/traps.h>
+#include <asm/vmid.h>
 
 /* Xen stack for bringing up the first CPU. */
 unsigned char __initdata cpu0_boot_stack[STACK_SIZE]
@@ -148,6 +149,8 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
     console_init_postirq();
 
+    vmid_init();
+
     printk("All set up\n");
 
     machine_halt();
xen/arch/riscv/vmid.c new file +165 -0

165 lines not on this page · raw message

Signature · 1 line
2.50.1
#25 lore raw

PATCH v3 6/20 xen/riscv: add root page table allocation

In reply to Oleksii Kurochko

Introduce support for allocating and initializing the root page table required for RISC-V stage-2 address translation.

To implement root page table allocation the following is introduced:
- p2m_get_clean_page() and p2m_alloc_root_table(), p2m_allocate_root() helpers to allocate and zero a 16 KiB root page table, as mandated by the RISC-V privileged specification for Sv32x4/Sv39x4/Sv48x4/Sv57x4 modes.
- Update p2m_init() to inititialize p2m_root_order.
- Add maddr_to_page() and page_to_maddr() macros for easier address manipulation.
- Introduce paging_ret_pages_to_domheap() to return some pages before allocate 16 KiB pages for root page table.
- Allocate root p2m table after p2m pool is initialized.
- Add construct_hgatp() to construct the hgatp register value based on p2m->root, p2m->hgatp_mode and VMID.

---
Changes in v3:
- Drop insterting of p2m->vmid in hgatp_from_page() as now vmid is allocated per-CPU, not per-domain, so it will be inserted later somewhere in context_switch or before returning control to a guest.
- use BIT() to init nr_pages in p2m_allocate_root() instead of open-code BIT() macros.
- Fix order in clear_and_clean_page().
- s/panic("Specify more xen,domain-p2m-mem-mb\n")/return NULL.
- Use lock around a procedure of returning back pages necessary for p2m root table.
- Update the comment about allocation of page for root page table.
- Update an argument of hgatp_from_page() to "struct page_info *p2m_root_page" to be consistent with the function name.
- Use p2m_get_hostp2m(d) instead of open-coding it.
- Update the comment above the call of p2m_alloc_root_table().
- Update the comments in p2m_allocate_root().
- Move part which returns some page to domheap before root page table allocation to paging.c.
- Pass p2m_domain * instead of struct domain * for p2m_alloc_root_table().
- Introduce construct_hgatp() instead of hgatp_from_page().
- Add vmid and hgatp_mode member of struct p2m_domain.
- Add explanatory comment above clean_dcache_va_range() in clear_and_clean_page().
- Introduce P2M_ROOT_ORDER and P2M_ROOT_PAGES.
- Drop vmid member from p2m_domain as now we are using per-pCPU VMID allocation.
- Update a declaration of construct_hgatp() to recieve VMID as it isn't per-VM anymore.
- Drop hgatp member of p2m_domain struct as with the new VMID scheme allocation construction of hgatp will be needed more often.
- Drop is_hardware_domain() case in p2m_allocate_root(), just always allocate root using p2m pool pages.
- Refactor p2m_alloc_root_table() and p2m_alloc_table().
---
Changes in v2:
- This patch was created from "xen/riscv: introduce things necessary for p2m initialization" with the following changes:
- [clear_and_clean_page()] Add missed call of clean_dcache_va_range().
- Drop p2m_get_clean_page() as it is going to be used only once to allocate root page table. Open-code it explicittly in p2m_allocate_root(). Also, it will help avoid duplication of the code connected to order and nr_pages of p2m root page table.
- Instead of using order 2 for alloc_domheap_pages(), use

     get_order_from_bytes(KB(16)).
   - Clear and clean a proper amount of allocated pages in p2m_allocate_root().
   - Drop _info from the function name hgatp_from_page_info() and its argument
     page_info.
   - Introduce HGATP_MODE_MASK and use MASK_INSR() instead of shift to calculate
     value of hgatp.
   - Drop unnecessary parentheses in definition of page_to_maddr().
   - Add support of VMID.
   - Drop TLB flushing in p2m_alloc_root_table() and do that once when VMID
     is re-used. [Look at p2m_alloc_vmid()]
   - Allocate p2m root table after p2m pool is fully initialized: first
     return pages to p2m pool them allocate p2m root table.
---
 xen/arch/riscv/include/asm/mm.h             |  4 +
 xen/arch/riscv/include/asm/p2m.h            | 12 +++
 xen/arch/riscv/include/asm/paging.h         |  2 +
 xen/arch/riscv/include/asm/riscv_encoding.h |  6 ++
 xen/arch/riscv/p2m.c                        | 90 +++++++++++++++++++++
 xen/arch/riscv/paging.c                     | 30 +++++++
 6 files changed, 144 insertions(+)
xen/arch/riscv/include/asm/mm.h +4 -0
index 9283616c02..dd8cdc9782 100644
@@ -167,6 +167,10 @@ extern struct page_info *frametable_virt_start;
 #define mfn_to_page(mfn)    (frametable_virt_start + mfn_x(mfn))
 #define page_to_mfn(pg)     _mfn((pg) - frametable_virt_start)
 
+/* Convert between machine addresses and page-info structures. */
+#define maddr_to_page(ma) mfn_to_page(maddr_to_mfn(ma))
+#define page_to_maddr(pg) mfn_to_maddr(page_to_mfn(pg))
+
 static inline void *page_to_virt(const struct page_info *pg)
 {
     return mfn_to_virt(mfn_x(page_to_mfn(pg)));
xen/arch/riscv/include/asm/p2m.h +12 -0
index f8051ed893..3c37a708db 100644
@@ -9,6 +9,10 @@
 
 #include <asm/page-bits.h>
 
+extern unsigned int p2m_root_order;
+#define P2M_ROOT_ORDER  p2m_root_order
+#define P2M_ROOT_PAGES  BIT(P2M_ROOT_ORDER, U)
+
 #define paddr_bits PADDR_BITS
 
 /* Get host p2m table */
@@ -24,6 +28,12 @@ struct p2m_domain {
     /* Pages used to construct the p2m */
     struct page_list_head pages;
 
+    /* The root of the p2m tree. May be concatenated */
+    struct page_info *root;
+
+    /* G-stage (stage-2) address translation mode */
+    unsigned long hgatp_mode;
+
     /* Indicate if it is required to clean the cache when writing an entry */
     bool clean_pte;
 
@@ -127,6 +137,8 @@ static inline void p2m_altp2m_check(struct vcpu *v, uint16_t idx)
     /* Not supported on RISCV. */
 }
 
+unsigned long construct_hgatp(struct p2m_domain *p2m, uint16_t vmid);
+
 #endif /* ASM__RISCV__P2M_H */
 
 /*
xen/arch/riscv/include/asm/paging.h +2 -0
index 8fdaeeb2e4..557fbd1abc 100644
@@ -10,4 +10,6 @@ int paging_domain_init(struct domain *d);
 int paging_freelist_init(struct domain *d, unsigned long pages,
                          bool *preempted);
 
+bool paging_ret_pages_to_domheap(struct domain *d, unsigned int nr_pages);
+
 #endif /* ASM_RISCV_PAGING_H */
xen/arch/riscv/include/asm/riscv_encoding.h +6 -0
index 6cc8f4eb45..8362df8784 100644
@@ -133,11 +133,13 @@
 #define HGATP_MODE_SV48X4		_UL(9)
 
 #define HGATP32_MODE_SHIFT		31
+#define HGATP32_MODE_MASK		_UL(0x80000000)
 #define HGATP32_VMID_SHIFT		22
 #define HGATP32_VMID_MASK		_UL(0x1FC00000)
 #define HGATP32_PPN			_UL(0x003FFFFF)
 
 #define HGATP64_MODE_SHIFT		60
+#define HGATP64_MODE_MASK		_ULL(0xF000000000000000)
 #define HGATP64_VMID_SHIFT		44
 #define HGATP64_VMID_MASK		_ULL(0x03FFF00000000000)
 #define HGATP64_PPN			_ULL(0x00000FFFFFFFFFFF)
@@ -170,6 +172,7 @@
 #define HGATP_VMID_SHIFT		HGATP64_VMID_SHIFT
 #define HGATP_VMID_MASK			HGATP64_VMID_MASK
 #define HGATP_MODE_SHIFT		HGATP64_MODE_SHIFT
+#define HGATP_MODE_MASK			HGATP64_MODE_MASK
 #else
 #define MSTATUS_SD			MSTATUS32_SD
 #define SSTATUS_SD			SSTATUS32_SD
@@ -181,8 +184,11 @@
 #define HGATP_VMID_SHIFT		HGATP32_VMID_SHIFT
 #define HGATP_VMID_MASK			HGATP32_VMID_MASK
 #define HGATP_MODE_SHIFT		HGATP32_MODE_SHIFT
+#define HGATP_MODE_MASK			HGATP32_MODE_MASK
 #endif
 
+#define GUEST_ROOT_PAGE_TABLE_SIZE	KB(16)
+
 #define TOPI_IID_SHIFT			16
 #define TOPI_IID_MASK			0xfff
 #define TOPI_IPRIO_MASK		0xff
xen/arch/riscv/p2m.c +90 -0

114 lines not on this page · raw message

xen/arch/riscv/paging.c +30 -0
index 8882be5ac9..bbe1186900 100644
@@ -54,6 +54,36 @@ int paging_freelist_init(struct domain *d, unsigned long pages,
 
     return 0;
 }
+
+bool paging_ret_pages_to_domheap(struct domain *d, unsigned int nr_pages)
+{
+    struct page_info *page;
+
+    ASSERT(spin_is_locked(&d->arch.paging.lock));
+
+    if ( ACCESS_ONCE(d->arch.paging.total_pages) < nr_pages )
+        return false;
+
+    for ( unsigned int i = 0; i < nr_pages; i++ )
+    {
+        /* Return memory to domheap. */
+        page = page_list_remove_head(&d->arch.paging.freelist);
+        if( page )
+        {
+            ACCESS_ONCE(d->arch.paging.total_pages)--;
+            free_domheap_page(page);
+        }
+        else
+        {
+            printk(XENLOG_ERR
+                   "Failed to free P2M pages, P2M freelist is empty.\n");
+            return false;
+        }
+    }
+
+    return true;
+}
+
 /* Domain paging struct initialization. */
 int paging_domain_init(struct domain *d)
 {
Signature · 1 line
2.50.1
#20 lore raw

PATCH v3 5/20 xen/riscv: construct the P2M pages pool for guests

In reply to Oleksii Kurochko

Implement p2m_set_allocation() to construct p2m pages pool for guests based on required number of pages.

This is implemented by:
- Adding a struct paging_domain which contains a freelist, a counter variable and a spinlock to struct arch_domain to indicate the free p2m pages and the number of p2m total pages in the p2m pages pool.
- Adding a helper p2m_set_allocation to set the p2m pages pool size. This helper should be called before allocating memory for a guest and is called from domain_p2m_set_allocation(), the latter is a part of common dom0less code.
- Adding paging_freelist_init() to struct paging_domain.

---
Changes in v3:
- Drop usage of p2m_ prefix inside struct paging_domain().
- Introduce paging_domain_init() to init paging struct.
---
Changes in v2:
- Drop the comment above inclusion of <xen/event.h> in riscv/p2m.c.
- Use ACCESS_ONCE() for lhs and rhs for the expressions in p2m_set_allocation().

---
 xen/arch/riscv/Makefile             |  1 +
 xen/arch/riscv/include/asm/Makefile |  1 -
 xen/arch/riscv/include/asm/domain.h | 12 ++++++
 xen/arch/riscv/include/asm/paging.h | 13 ++++++
 xen/arch/riscv/p2m.c                | 19 +++++++++
 xen/arch/riscv/paging.c             | 64 +++++++++++++++++++++++++++++
 6 files changed, 109 insertions(+), 1 deletion(-)
 create mode 100644 xen/arch/riscv/include/asm/paging.h
 create mode 100644 xen/arch/riscv/paging.c
xen/arch/riscv/Makefile +1 -0
index e2499210c8..6b912465b9 100644
@@ -6,6 +6,7 @@ obj-y += imsic.o
 obj-y += intc.o
 obj-y += irq.o
 obj-y += mm.o
+obj-y += paging.o
 obj-y += pt.o
 obj-y += p2m.o
 obj-$(CONFIG_RISCV_64) += riscv64/
xen/arch/riscv/include/asm/Makefile +0 -1
index bfdf186c68..3824f31c39 100644
@@ -6,7 +6,6 @@ generic-y += hardirq.h
 generic-y += hypercall.h
 generic-y += iocap.h
 generic-y += irq-dt.h
-generic-y += paging.h
 generic-y += percpu.h
 generic-y += perfc_defn.h
 generic-y += random.h
xen/arch/riscv/include/asm/domain.h +12 -0
index e688980efa..316e7c6c84 100644
@@ -2,6 +2,8 @@
 #ifndef ASM__RISCV__DOMAIN_H
 #define ASM__RISCV__DOMAIN_H
 
+#include <xen/mm.h>
+#include <xen/spinlock.h>
 #include <xen/xmalloc.h>
 #include <public/hvm/params.h>
 
@@ -24,11 +26,21 @@ struct arch_vcpu {
     struct vcpu_vmid vmid;
 };
 
+struct paging_domain {
+    spinlock_t lock;
+    /* Free pages from the pre-allocated pool */
+    struct page_list_head freelist;
+    /* Number of pages from the pre-allocated pool */
+    unsigned long total_pages;
+};
+
 struct arch_domain {
     struct hvm_domain hvm;
 
     /* Virtual MMU */
     struct p2m_domain p2m;
+
+    struct paging_domain paging;
 };
 
 #include <xen/sched.h>
xen/arch/riscv/include/asm/paging.h new file +13 -0
new file mode 100644
index 0000000000..8fdaeeb2e4
@@ -0,0 +1,13 @@
+#ifndef ASM_RISCV_PAGING_H
+#define ASM_RISCV_PAGING_H
+
+#include <asm-generic/paging.h>
+
+struct domain;
+
+int paging_domain_init(struct domain *d);
+
+int paging_freelist_init(struct domain *d, unsigned long pages,
+                         bool *preempted);
+
+#endif /* ASM_RISCV_PAGING_H */
xen/arch/riscv/p2m.c +19 -0
index ae937e9bdd..214b4861d2 100644
@@ -2,6 +2,8 @@
 #include <xen/rwlock.h>
 #include <xen/sched.h>
 
+#include <asm/paging.h>
+
 int p2m_init(struct domain *d)
 {
     struct p2m_domain *p2m = p2m_get_hostp2m(d);
@@ -12,6 +14,8 @@ int p2m_init(struct domain *d)
      */
     p2m->domain = d;
 
+    paging_domain_init(d);
+
     rwlock_init(&p2m->lock);
     INIT_PAGE_LIST_HEAD(&p2m->pages);
 
@@ -30,3 +34,18 @@ int p2m_init(struct domain *d)
 
     return 0;
 }
+
+/*
+ * Set the pool of pages to the required number of pages.
+ * Returns 0 for success, non-zero for failure.
+ * Call with d->arch.paging.lock held.
+ */
+int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)
+{
+    int rc;
+
+    if ( (rc = paging_freelist_init(d, pages, preempted)) )
+        return rc;
+
+    return 0;
+}
xen/arch/riscv/paging.c new file +64 -0

64 lines not on this page · raw message

Signature · 1 line
2.50.1
#35 lore raw

PATCH v3 7/20 xen/riscv: introduce pte_{set,get}_mfn()

In reply to Oleksii Kurochko

Introduce helpers pte_{set,get}_mfn() to simplify setting and getting of mfn.

Also, introduce PTE_PPN_MASK and add BUILD_BUG_ON() to be sure that PTE_PPN_MASK remains the same for all MMU modes except Sv32.

---
Changes in V3:
- Add Acked-by: Jan Beulich <[email protected]>.
---
Changes in V2:
- Patch "[PATCH v1 4/6] xen/riscv: define pt_t and pt_walk_t structures" was renamed to xen/riscv: introduce pte_{set,get}_mfn() as after dropping of bitfields for PTE structure, this patch introduce only pte_{set,get}_mfn().
- As pt_t and pt_walk_t were dropped, update implementation of pte_{set,get}_mfn() to use bit operations and shifts instead of bitfields.
- Introduce PTE_PPN_MASK to be able to use MASK_INSR for setting/getting PPN.
- Add BUILD_BUG_ON(RV_STAGE1_MODE > SATP_MODE_SV57) to be sure that when new MMU mode will be added, someone checks that PPN is still bits 53:10.

---
 xen/arch/riscv/include/asm/page.h | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
xen/arch/riscv/include/asm/page.h +24 -0
index ddcc4da0a3..66cb192316 100644
@@ -112,6 +112,30 @@ typedef struct {
 #endif
 } pte_t;
 
+#if RV_STAGE1_MODE != SATP_MODE_SV32
+#define PTE_PPN_MASK _UL(0x3FFFFFFFFFFC00)
+#else
+#define PTE_PPN_MASK _U(0xFFFFFC00)
+#endif
+
+static inline void pte_set_mfn(pte_t *p, mfn_t mfn)
+{
+    /*
+     * At the moment spec provides Sv32 - Sv57.
+     * If one day new MMU mode will be added it will be needed
+     * to check that PPN mask still continue to cover bits 53:10.
+     */
+    BUILD_BUG_ON(RV_STAGE1_MODE > SATP_MODE_SV57);
+
+    p->pte &= ~PTE_PPN_MASK;
+    p->pte |= MASK_INSR(mfn_x(mfn), PTE_PPN_MASK);
+}
+
+static inline mfn_t pte_get_mfn(pte_t p)
+{
+    return _mfn(MASK_EXTR(p.pte, PTE_PPN_MASK));
+}
+
 static inline bool pte_is_valid(pte_t p)
 {
     return p.pte & PTE_VALID;
Signature · 1 line
2.50.1
#36 lore raw

PATCH v3 8/20 xen/riscv: add new p2m types and helper macros for type classification

In reply to Oleksii Kurochko

- Extended p2m_type_t with additional types: p2m_mmio_direct, p2m_grant_map_{rw,ro}.
- Added macros to classify memory types: P2M_RAM_TYPES, P2M_GRANT_TYPES.
- Introduced helper predicates: p2m_is_ram(), p2m_is_any_ram().
- Define p2m_mmio_direct to tell handle_passthrough_prop() from common code how to map device memory.

---
Changes in V3:
- Drop p2m_ram_ro.
- Rename p2m_mmio_direct_dev to p2m_mmio_direct_io to make it more RISC-V specicific.
- s/p2m_mmio_direct_dev/p2m_mmio_direct_io.
---
Changes in V2:
- Drop stuff connected to foreign mapping as it isn't necessary for RISC-V right now.

---
 xen/arch/riscv/include/asm/p2m.h | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
xen/arch/riscv/include/asm/p2m.h +22 -0
index 3c37a708db..5f253da1dd 100644
@@ -62,8 +62,30 @@ struct p2m_domain {
 typedef enum {
     p2m_invalid = 0,    /* Nothing mapped here */
     p2m_ram_rw,         /* Normal read/write domain RAM */
+    p2m_mmio_direct_io, /* Read/write mapping of genuine Device MMIO area,
+                           PTE_PBMT_IO will be used for such mappings */
+    p2m_ext_storage,    /* Following types'll be stored outsude PTE bits: */
+    p2m_grant_map_rw,   /* Read/write grant mapping */
+    p2m_grant_map_ro,   /* Read-only grant mapping */
 } p2m_type_t;
 
+#define p2m_mmio_direct p2m_mmio_direct_io
+
+/* We use bitmaps and mask to handle groups of types */
+#define p2m_to_mask(t_) BIT(t_, UL)
+
+/* RAM types, which map to real machine frames */
+#define P2M_RAM_TYPES (p2m_to_mask(p2m_ram_rw))
+
+/* Grant mapping types, which map to a real frame in another VM */
+#define P2M_GRANT_TYPES (p2m_to_mask(p2m_grant_map_rw) | \
+                         p2m_to_mask(p2m_grant_map_ro))
+
+/* Useful predicates */
+#define p2m_is_ram(t_) (p2m_to_mask(t_) & P2M_RAM_TYPES)
+#define p2m_is_any_ram(t_) (p2m_to_mask(t_) & \
+                            (P2M_RAM_TYPES | P2M_GRANT_TYPES))
+
 #include <xen/p2m-common.h>
 
 static inline int get_page_and_type(struct page_info *page,
Signature · 1 line
2.50.1
#51 lore raw

PATCH v3 12/20 xen/riscv: implement p2m_set_range()

In reply to Oleksii Kurochko

This patch introduces p2m_set_range() and its core helper p2m_set_entry() for RISC-V, based loosely on the Arm implementation, with several RISC-V-specific modifications.

The main changes are:
- Simplification of Break-Before-Make (BBM) approach as according to RISC-V spec:
It is permitted for multiple address-translation cache entries to co-exist for the same address. This represents the fact that in a conventional TLB hierarchy, it is possible for multiple entries to match a single address if, for example, a page is upgraded to a superpage without first clearing the original non-leaf PTE’s valid bit and executing an SFENCE.VMA with rs1=x0, or if multiple TLBs exist in parallel at a given level of the hierarchy. In this case, just as if an SFENCE.VMA is not executed between a write to the memory-management tables and subsequent implicit read of the same address: it is unpredictable whether the old non-leaf PTE or the new leaf PTE is used, but the behavior is otherwise well defined.
In contrast to the Arm architecture, where BBM is mandatory and failing to use it in some cases can lead to CPU instability, RISC-V guarantees stability, and the behavior remains safe — though unpredictable in terms of which translation will be used.
- Unlike Arm, the valid bit is not repurposed for other uses in this implementation. Instead, entry validity is determined based solely on P2M PTE's valid bit.

The main functionality is in p2m_set_entry(), which handles mappings aligned to page table block entries (e.g., 1GB, 2MB, or 4KB with 4KB granularity).

p2m_set_range() breaks a region down into block-aligned mappings and calls p2m_set_entry() accordingly.

Stub implementations (to be completed later) include:
- p2m_free_subtree()
- p2m_next_level()
- p2m_pte_from_mfn()

Note: Support for shattering block entries is not implemented in this patch and will be added separately.

Additionally, some straightforward helper functions are now implemented:
- p2m_write_pte()
- p2m_remove_pte()
- p2m_get_root_pointer()

---
Changes in V3:
- Drop p2m_access_t connected stuff as it isn't going to be used, at least now.
- Move defintion of P2M_ROOT_ORDER and P2M_ROOT_PAGES to earlier patches.
- Update the comment above lowest_mapped_gfn declaration.
- Update the comment above p2m_get_root_pointer(): s/"...ofset of the root table"/"...ofset into root table".
- s/p2m_remove_pte/p2m_clean_pte.
- Use plain 0 instead of 0x00 in p2m_clean_pte().
- s/p2m_entry_from_mfn/p2m_pte_from_mfn.
- s/GUEST_TABLE_*/P2M_TABLE_*.
- Update the comment above p2m_next_level(): "GFN entry" -> "corresponding the entry corresponding to the GFN".
- s/__p2m_set_entry/_p2m_set_entry.
- drop "s" for sgfn and smfn prefixes of _p2m_set_entry()'s arguments as this function work only with one GFN and one MFN.
- Return correct return code when p2m_next_level() faild in _p2m_set_entry(), also drop "else" and just handle case (rc != P2M_TABLE_NORMAL) separately.
- Code style fixes.
- Use unsigned int for "order" in p2m_set_entry().
- s/p2m_set_entry/p2m_free_subtree.
- Update ASSERT() in __p2m_set_enty() to check that page_order is propertly aligned.
- Return -EACCES instead of -ENOMEM in the chase when domain is dying and someone called p2m_set_entry.
- s/p2m_set_entry/p2m_set_range.
- s/__p2m_set_entry/p2m_set_entry
- s/p2me_is_valid/p2m_is_valid()
- Return a number of successfully mapped GFNs in case if not all were mapped in p2m_set_range().
- Use BIT(order, UL) instead of 1 << order.
- Drop IOMMU flushing code from p2m_set_entry().
- set p2m->need_flush=true when entry in p2m_set_entry() is changed.
- Introduce p2m_mapping_order() to support superpages.
- Drop p2m_is_valid() and use pte_is_valid() instead as there is no tricks with copying of valid bit anymore.
- Update p2m_pte_from_mfn() prototype: drop p2m argument.
---
Changes in V2:
- New patch. It was a part of a big patch "xen/riscv: implement p2m mapping functionality" which was splitted to smaller.
- Update the way when p2m TLB is flushed:
- RISC-V does't require BBM so there is no need to remove PTE before making new so drop 'if /*pte_is_valid(orig_pte) */' and remove PTE only removing has been requested.
- Drop p2m->need_flush |= !!pte_is_valid(orig_pte); for the case when PTE's removing is happening as RISC-V could cache invalid PTE and thereby it requires to do a flush each time and it doesn't matter if PTE is valid or not at the moment when PTE removing is happening.
- Drop a check if PTE is valid in case of PTE is modified as it was mentioned above as BBM isn't required so TLB flushing could be defered and there is no need to do it before modifying of PTE.
- Drop p2m->need_flush as it seems like it will be always true.
- Drop foreign mapping things as it isn't necessary for RISC-V right now.
- s/p2m_is_valid/p2me_is_valid.
- Move definition and initalization of p2m->{max_mapped_gfn,lowest_mapped_gfn} to this patch.

---
 xen/arch/riscv/include/asm/p2m.h |  12 ++
 xen/arch/riscv/p2m.c             | 250 ++++++++++++++++++++++++++++++-
 2 files changed, 261 insertions(+), 1 deletion(-)
xen/arch/riscv/include/asm/p2m.h +12 -0
index ada3c398b4..26ad87b8df 100644
@@ -7,11 +7,13 @@
 #include <xen/rwlock.h>
 #include <xen/types.h>
 
+#include <asm/page.h>
 #include <asm/page-bits.h>
 
 extern unsigned int p2m_root_order;
 #define P2M_ROOT_ORDER  p2m_root_order
 #define P2M_ROOT_PAGES  BIT(P2M_ROOT_ORDER, U)
+#define P2M_ROOT_LEVEL  HYP_PT_ROOT_LEVEL
 
 #define paddr_bits PADDR_BITS
 
@@ -50,6 +52,16 @@ struct p2m_domain {
      * shattered), call p2m_tlb_flush_sync().
      */
     bool need_flush;
+
+    /* Highest guest frame that's ever been mapped in the p2m */
+    gfn_t max_mapped_gfn;
+
+    /*
+     * Lowest mapped gfn in the p2m. When releasing mapped gfn's in a
+     * preemptible manner this is updated to track where to resume
+     * the search. Apart from during teardown this can only decrease.
+     */
+    gfn_t lowest_mapped_gfn;
 };
 
 /*
xen/arch/riscv/p2m.c +249 -1

274 lines not on this page · raw message

Signature · 1 line
2.50.1
#56 lore raw

PATCH v3 13/20 xen/riscv: Implement p2m_free_subtree() and related helpers

In reply to Oleksii Kurochko

This patch introduces a working implementation of p2m_free_subtree() for RISC-V based on ARM's implementation of p2m_free_entry(), enabling proper cleanup of page table entries in the P2M (physical-to-machine) mapping.

Only few things are changed:
- Introduce and use p2m_get_type() to get a type of p2m entry as RISC-V's PTE doesn't have enough space to store all necessary types so a type is stored outside PTE. But, at the moment, handle only types which fit into PTE's bits.

Key additions include:
- p2m_free_subtree(): Recursively frees page table entries at all levels. It handles both regular and superpage mappings and ensures that TLB entries are flushed before freeing intermediate tables.
- p2m_put_page() and helpers:
- p2m_put_4k_page(): Clears GFN from xenheap pages if applicable.
- p2m_put_2m_superpage(): Releases foreign page references in a 2MB superpage.
- p2m_get_type(): Extracts the stored p2m_type from the PTE bits.
- p2m_free_page(): Returns a page to a domain's freelist.
- Introduce p2m_is_foreign() and connected to it things.

Defines XEN_PT_ENTRIES in asm/page.h to simplify loops over page table entries.

---
Changes in V3:
- Use p2m_tlb_flush_sync(p2m) instead of p2m_force_tlb_flush_sync() in p2m_free_subtree().
- Drop p2m_is_valid() implementation as pte_is_valid() is going to be used instead.
- Drop p2m_is_superpage() and introduce pte_is_superpage() instead.
- s/p2m_free_entry/p2m_free_subtree.
- s/p2m_type_radix_get/p2m_get_type.
- Update implementation of p2m_get_type() to get type both from PTE bits, other cases will be covered in a separate patch. This requires an introduction of new P2M_TYPE_PTE_BITS_MASK macros.
- Drop p2m argument of p2m_get_type() as it isn't needed anymore.
- Put cheapest checks first in p2m_is_superpage().
- Use switch() in p2m_put_page().
- Update the comment in p2m_put_foreign_page().
- Code style fixes.
- Move p2m_foreign stuff to this commit.
- Drop p2m argument of p2m_put_page() as itsn't used anymore.
---
Changes in V2:
- New patch. It was a part of 2ma big patch "xen/riscv: implement p2m mapping functionality" which was splitted to smaller.
- s/p2m_is_superpage/p2me_is_superpage.

---
 xen/arch/riscv/include/asm/p2m.h    |  18 +++-
 xen/arch/riscv/include/asm/page.h   |   6 ++
 xen/arch/riscv/include/asm/paging.h |   2 +
 xen/arch/riscv/p2m.c                | 137 +++++++++++++++++++++++++++-
 xen/arch/riscv/paging.c             |   7 ++
 5 files changed, 168 insertions(+), 2 deletions(-)
xen/arch/riscv/include/asm/p2m.h +17 -1
index 26ad87b8df..fbc73448a7 100644
@@ -79,10 +79,20 @@ typedef enum {
     p2m_ext_storage,    /* Following types'll be stored outsude PTE bits: */
     p2m_grant_map_rw,   /* Read/write grant mapping */
     p2m_grant_map_ro,   /* Read-only grant mapping */
+    p2m_map_foreign_rw, /* Read/write RAM pages from foreign domain */
+    p2m_map_foreign_ro, /* Read-only RAM pages from foreign domain */
 } p2m_type_t;
 
 #define p2m_mmio_direct p2m_mmio_direct_io
 
+/*
+ * Bits 8 and 9 are reserved for use by supervisor software;
+ * the implementation shall ignore this field.
+ * We are going to use to save in these bits frequently used types to avoid
+ * get/set of a type from radix tree.
+ */
+#define P2M_TYPE_PTE_BITS_MASK  0x300
+
 /* We use bitmaps and mask to handle groups of types */
 #define p2m_to_mask(t_) BIT(t_, UL)
 
@@ -93,10 +103,16 @@ typedef enum {
 #define P2M_GRANT_TYPES (p2m_to_mask(p2m_grant_map_rw) | \
                          p2m_to_mask(p2m_grant_map_ro))
 
+                            /* Foreign mappings types */
+#define P2M_FOREIGN_TYPES (p2m_to_mask(p2m_map_foreign_rw) | \
+                           p2m_to_mask(p2m_map_foreign_ro))
+
 /* Useful predicates */
 #define p2m_is_ram(t_) (p2m_to_mask(t_) & P2M_RAM_TYPES)
 #define p2m_is_any_ram(t_) (p2m_to_mask(t_) & \
-                            (P2M_RAM_TYPES | P2M_GRANT_TYPES))
+                            (P2M_RAM_TYPES | P2M_GRANT_TYPES | \
+                             P2M_FOREIGN_TYPES))
+#define p2m_is_foreign(t_) (p2m_to_mask(t_) & P2M_FOREIGN_TYPES)
 
 #include <xen/p2m-common.h>
 
xen/arch/riscv/include/asm/page.h +6 -0
index 66cb192316..cb303af0c0 100644
@@ -20,6 +20,7 @@
 #define XEN_PT_LEVEL_SIZE(lvl)      (_AT(paddr_t, 1) << XEN_PT_LEVEL_SHIFT(lvl))
 #define XEN_PT_LEVEL_MAP_MASK(lvl)  (~(XEN_PT_LEVEL_SIZE(lvl) - 1))
 #define XEN_PT_LEVEL_MASK(lvl)      (VPN_MASK << XEN_PT_LEVEL_SHIFT(lvl))
+#define XEN_PT_ENTRIES              (_AT(unsigned int, 1) << PAGETABLE_ORDER)
 
 /*
  * PTE format:
@@ -182,6 +183,11 @@ static inline bool pte_is_mapping(pte_t p)
     return (p.pte & PTE_VALID) && (p.pte & PTE_ACCESS_MASK);
 }
 
+static inline bool pte_is_superpage(pte_t p, unsigned int level)
+{
+    return (level > 0) && pte_is_mapping(p);
+}
+
 static inline int clean_and_invalidate_dcache_va_range(const void *p,
                                                        unsigned long size)
 {
xen/arch/riscv/include/asm/paging.h +2 -0
index 557fbd1abc..c9063b7f76 100644
@@ -12,4 +12,6 @@ int paging_freelist_init(struct domain *d, unsigned long pages,
 
 bool paging_ret_pages_to_domheap(struct domain *d, unsigned int nr_pages);
 
+void paging_free_page(struct domain *d, struct page_info *pg);
+
 #endif /* ASM_RISCV_PAGING_H */
xen/arch/riscv/p2m.c +136 -1

153 lines not on this page · raw message

xen/arch/riscv/paging.c +7 -0
index bbe1186900..853e0e14c6 100644
@@ -84,6 +84,13 @@ bool paging_ret_pages_to_domheap(struct domain *d, unsigned int nr_pages)
     return true;
 }
 
+void paging_free_page(struct domain *d, struct page_info *pg)
+{
+    spin_lock(&d->arch.paging.lock);
+    page_list_add_tail(pg, &d->arch.paging.freelist);
+    spin_unlock(&d->arch.paging.lock);
+}
+
 /* Domain paging struct initialization. */
 int paging_domain_init(struct domain *d)
 {
Signature · 1 line
2.50.1
#61 lore raw

PATCH v3 14/20 xen/riscv: Implement p2m_pte_from_mfn() and support PBMT configuration

In reply to Oleksii Kurochko

This patch adds the initial logic for constructing PTEs from MFNs in the RISC-V p2m subsystem. It includes:
- Implementation of p2m_pte_from_mfn(): Generates a valid PTE using the given MFN, p2m_type_t, including permission encoding and PBMT attribute setup.
- New helper p2m_set_permission(): Encodes access rights (r, w, x) into the PTE based on both p2m type and access permissions.
- p2m_set_type(): Stores the p2m type in PTE's bits. The storage of types, which don't fit PTE bits, will be implemented separately later.

PBMT type encoding support:
- Introduces an enum pbmt_type_t to represent the PBMT field values.
- Maps types like p2m_mmio_direct_dev to p2m_mmio_direct_io, others default to pbmt_pma.

---
Changes in V3:
- s/p2m_entry_from_mfn/p2m_pte_from_mfn.
- s/pbmt_type_t/pbmt_type.
- s/pbmt_max/pbmt_count.
- s/p2m_type_radix_set/p2m_set_type.
- Rework p2m_set_type() to handle only types which are fited into PTEs bits. Other types will be covered separately.
Update arguments of p2m_set_type(): there is no any reason for p2m anymore.
- p2m_set_permissions() updates:
- Update the code in p2m_set_permission() for cases p2m_raw_rw and p2m_mmio_direct_io to set proper type permissions.
- Add cases for p2m_grant_map_rw and p2m_grant_map_ro.
- Use ASSERT_UNEACHABLE() instead of BUG() in switch cases of p2m_set_permissions.
- Add blank lines non-fall-through case blocks in switch cases.
- Set MFN before permissions are set in p2m_pte_from_mfn().
- Update prototype of p2m_entry_from_mfn().
---
Changes in V2:
- New patch. It was a part of a big patch "xen/riscv: implement p2m mapping functionality" which was splitted to smaller.

---
 xen/arch/riscv/include/asm/page.h |  8 +++
 xen/arch/riscv/p2m.c              | 81 +++++++++++++++++++++++++++++--
 2 files changed, 85 insertions(+), 4 deletions(-)
xen/arch/riscv/include/asm/page.h +8 -0
index cb303af0c0..4fa0556073 100644
@@ -74,6 +74,14 @@
 #define PTE_SMALL       BIT(10, UL)
 #define PTE_POPULATE    BIT(11, UL)
 
+enum pbmt_type {
+    pbmt_pma,
+    pbmt_nc,
+    pbmt_io,
+    pbmt_rsvd,
+    pbmt_count,
+};
+
 #define PTE_ACCESS_MASK (PTE_READABLE | PTE_WRITABLE | PTE_EXECUTABLE)
 
 #define PTE_PBMT_MASK   (PTE_PBMT_NOCACHE | PTE_PBMT_IO)
xen/arch/riscv/p2m.c +77 -4

104 lines not on this page · raw message

Signature · 1 line
2.50.1
#71 lore raw

PATCH v3 17/20 xen/riscv: implement put_page()

In reply to Oleksii Kurochko

Implement put_page(), as it will be used by p2m_put_code().

Although CONFIG_STATIC_MEMORY has not yet been introduced for RISC-V, a stub for PGC_static is added to avoid cluttering the code of put_page_nr() with #ifdefs.

---
 xen/arch/riscv/include/asm/mm.h |  7 +++++++
 xen/arch/riscv/mm.c             | 25 ++++++++++++++++++++-----
 2 files changed, 27 insertions(+), 5 deletions(-)
xen/arch/riscv/include/asm/mm.h +7 -0
index 7950d132c1..b914813e52 100644
@@ -273,6 +273,13 @@ static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr)
 /* Page is Xen heap? */
 #define _PGC_xen_heap     PG_shift(2)
 #define PGC_xen_heap      PG_mask(1, 2)
+#ifdef CONFIG_STATIC_MEMORY
+/* Page is static memory */
+#define _PGC_static       PG_shift(3)
+#define PGC_static        PG_mask(1, 3)
+#else
+#define PGC_static     0
+#endif
 /* Page is broken? */
 #define _PGC_broken       PG_shift(7)
 #define PGC_broken        PG_mask(1, 7)
xen/arch/riscv/mm.c +20 -5
index 1ef015f179..3cac16f1b7 100644
@@ -362,11 +362,6 @@ unsigned long __init calc_phys_offset(void)
     return phys_offset;
 }
 
-void put_page(struct page_info *page)
-{
-    BUG_ON("unimplemented");
-}
-
 void arch_dump_shared_mem_info(void)
 {
     BUG_ON("unimplemented");
@@ -627,3 +622,23 @@ void flush_page_to_ram(unsigned long mfn, bool sync_icache)
     if ( sync_icache )
         invalidate_icache();
 }
+
+void put_page(struct page_info *page)
+{
+    unsigned long nx, x, y = page->count_info;
+
+    do {
+        ASSERT((y & PGC_count_mask) >= 1);
+        x  = y;
+        nx = x - 1;
+    }
+    while ( unlikely((y = cmpxchg(&page->count_info, x, nx)) != x) );
+
+    if ( unlikely((nx & PGC_count_mask) == 0) )
+    {
+        if ( unlikely(nx & PGC_static) )
+            free_domstatic_page(page);
+        else
+            free_domheap_page(page);
+    }
+}
Signature · 1 line
2.50.1
#65 lore raw

PATCH v3 15/20 xen/riscv: implement p2m_next_level()

In reply to Oleksii Kurochko

Implement the p2m_next_level() function, which enables traversal and dynamic allocation of intermediate levels (if necessary) in the RISC-V p2m (physical-to-machine) page table hierarchy.

To support this, the following helpers are introduced:
- page_to_p2m_table(): Constructs non-leaf PTEs pointing to next-level page tables with correct attributes.
- p2m_alloc_page(): Allocates page table pages, supporting both hardware and guest domains.
- p2m_create_table(): Allocates and initializes a new page table page and installs it into the hierarchy.

---
Changes in V3:
- s/p2me_is_mapping/p2m_is_mapping to be in syc with other p2m_is_*() functions.
- clear_and_clean_page() in p2m_create_table() instead of clear_page() to be sure that page is cleared and d-cache is flushed for it.
- Move ASSERT(level != 0) in p2m_next_level() ahead of trying to allocate a page table.
- Update p2m_create_table() to allocate metadata page to store p2m type in it for each entry of page table.
- Introduce paging_alloc_page() and use it inside p2m_alloc_page().
- Add allocated page to p2m->pages list in p2m_alloc_page() to simplify a caller code a little bit.
- Drop p2m_is_mapping() and use pte_is_mapping() instead as P2M PTE's valid bit doesn't have another purpose anymore.
- Update an implementation and prototype of page_to_p2m_table(), it is enough to pass only a page as an argument.
---
Changes in V2:
- New patch. It was a part of a big patch "xen/riscv: implement p2m mapping functionality" which was splitted to smaller.
- s/p2m_is_mapping/p2m_is_mapping.

---
 xen/arch/riscv/include/asm/paging.h |  2 +
 xen/arch/riscv/p2m.c                | 80 ++++++++++++++++++++++++++++-
 xen/arch/riscv/paging.c             | 11 ++++
 3 files changed, 91 insertions(+), 2 deletions(-)
xen/arch/riscv/include/asm/paging.h +2 -0
index c9063b7f76..3642bcfc7a 100644
@@ -14,4 +14,6 @@ bool paging_ret_pages_to_domheap(struct domain *d, unsigned int nr_pages);
 
 void paging_free_page(struct domain *d, struct page_info *pg);
 
+struct page_info * paging_alloc_page(struct domain *d);
+
 #endif /* ASM_RISCV_PAGING_H */
xen/arch/riscv/p2m.c +78 -2

93 lines not on this page · raw message

xen/arch/riscv/paging.c +11 -0
index 853e0e14c6..72ff183260 100644
@@ -91,6 +91,17 @@ void paging_free_page(struct domain *d, struct page_info *pg)
     spin_unlock(&d->arch.paging.lock);
 }
 
+struct page_info * paging_alloc_page(struct domain *d)
+{
+    struct page_info *pg;
+
+    spin_lock(&d->arch.paging.lock);
+    pg = page_list_remove_head(&d->arch.paging.freelist);
+    spin_unlock(&d->arch.paging.lock);
+
+    return pg;
+}
+
 /* Domain paging struct initialization. */
 int paging_domain_init(struct domain *d)
 {
Signature · 1 line
2.50.1
#42 lore raw

PATCH v3 10/20 xen/riscv: introduce page_{get,set}_xenheap_gfn()

In reply to Oleksii Kurochko

Introduce page_set_xenheap_gfn() to encode the GFN associated with a Xen heap page directly into the type_info field of struct page_info.

Introduce page_get_xenheap_gfn() to retrieve the GFN from a Xen heap page.

Reserve the upper 10 bits of type_info for the usage counter and frame type; use the remaining lower bits to store the grant table frame GFN. This is sufficient for all supported RISC-V MMU modes: Sv32 uses 22-bit GFNs, while Sv39, Sv47, and Sv57 use up to 44-bit GFNs.

Define PGT_gfn_mask and PGT_gfn_width to ensure a consistent bit layout across all RISC-V MMU modes, avoiding the need for mode-specific ifdefs.

---
Changes in v3:
- Update the comment above defintions of PGT_gfn_width, PGT_gfn_mask.
- Add page_get_xenheap_gfn().
- Make commit message clearer.
---
Changes in v2:
- This changes were part of "xen/riscv: implement p2m mapping functionality". No additional changes were done.

---
 xen/arch/riscv/include/asm/mm.h | 43 ++++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)
xen/arch/riscv/include/asm/mm.h +40 -3
index dd8cdc9782..7950d132c1 100644
@@ -12,6 +12,7 @@
 #include <xen/sections.h>
 #include <xen/types.h>
 
+#include <asm/cmpxchg.h>
 #include <asm/page.h>
 #include <asm/page-bits.h>
 
@@ -247,9 +248,17 @@ static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr)
 #define PGT_writable_page PG_mask(1, 1)  /* has writable mappings?         */
 #define PGT_type_mask     PG_mask(1, 1)  /* Bits 31 or 63.                 */
 
-/* Count of uses of this frame as its current type. */
-#define PGT_count_width   PG_shift(2)
-#define PGT_count_mask    ((1UL << PGT_count_width) - 1)
+ /* 9-bit count of uses of this frame as its current type. */
+#define PGT_count_mask    PG_mask(0x3FF, 10)
+
+/*
+ * Stored in bits [22:0] (Sv32) or [44:0] (Sv39,48,57) GFN if page is
+ * xenheap page.
+ */
+#define PGT_gfn_width     PG_shift(10)
+#define PGT_gfn_mask      (BIT(PGT_gfn_width, UL) - 1)
+
+#define PGT_INVALID_XENHEAP_GFN   _gfn(PGT_gfn_mask)
 
 /*
  * Page needs to be scrubbed. Since this bit can only be set on a page that is
@@ -301,6 +310,34 @@ static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr)
 
 #define PFN_ORDER(pg) ((pg)->v.free.order)
 
+/*
+ * All accesses to the GFN portion of type_info field should always be
+ * protected by the P2M lock. In case when it is not feasible to satisfy
+ * that requirement (risk of deadlock, lock inversion, etc) it is important
+ * to make sure that all non-protected updates to this field are atomic.
+ */
+static inline gfn_t page_get_xenheap_gfn(const struct page_info *p)
+{
+    gfn_t gfn = _gfn(ACCESS_ONCE(p->u.inuse.type_info) & PGT_gfn_mask);
+
+    ASSERT(is_xen_heap_page(p));
+
+    return gfn_eq(gfn, PGT_INVALID_XENHEAP_GFN) ? INVALID_GFN : gfn;
+}
+
+static inline void page_set_xenheap_gfn(struct page_info *p, gfn_t gfn)
+{
+    gfn_t gfn_ = gfn_eq(gfn, INVALID_GFN) ? PGT_INVALID_XENHEAP_GFN : gfn;
+    unsigned long x, nx, y = p->u.inuse.type_info;
+
+    ASSERT(is_xen_heap_page(p));
+
+    do {
+        x = y;
+        nx = (x & ~PGT_gfn_mask) | gfn_x(gfn_);
+    } while ( (y = cmpxchg(&p->u.inuse.type_info, x, nx)) != x );
+}
+
 extern unsigned char cpu0_boot_stack[];
 
 void setup_initial_pagetables(void);
Signature · 1 line
2.50.1
#81 lore raw

PATCH v3 20/20 xen/riscv: introduce metadata table to store P2M type

In reply to Oleksii Kurochko

RISC-V's PTE has only two available bits that can be used to store the P2M type. This is insufficient to represent all the current RISC-V P2M types. Therefore, some P2M types must be stored outside the PTE bits.

To address this, a metadata table is introduced to store P2M types that cannot fit in the PTE itself. Not all P2M types are stored in the metadata table—only those that require it.

The metadata table is linked to the intermediate page table via the struct page_info's list field of the corresponding intermediate page.

To simplify the allocation and linking of intermediate and metadata page tables, p2m_{alloc,free}_table() functions are implemented.

These changes impact p2m_split_superpage(), since when a superpage is split, it is necessary to update the metadata table of the new intermediate page table — if the entry being split has its P2M type set to p2m_ext_storage in its P2M_TYPES bits. In addition to updating the metadata of the new intermediate page table, the corresponding entry in the metadata for the original superpage is invalidated.

Also, update p2m_{get,set}_type to work with P2M types which don't fit into PTE bits.

---
Changes in V3:
- Add is_p2m_foreign() macro and connected stuff.
- Change struct domain *d argument of p2m_get_page_from_gfn() to
struct p2m_domain.
- Update the comment above p2m_get_entry().
- s/_t/p2mt for local variable in p2m_get_entry().
- Drop local variable addr in p2m_get_entry() and use gfn_to_gaddr(gfn)
to define offsets array.
- Code style fixes.
- Update a check of rc code from p2m_next_level() in p2m_get_entry()
and drop "else" case.
- Do not call p2m_get_type() if p2m_get_entry()'s t argument is NULL.
- Use struct p2m_domain instead of struct domain for p2m_lookup() and
p2m_get_page_from_gfn().
- Move defintion of get_page() from "xen/riscv: implement mfn_valid() and page reference, ownership handling helpers"
---
Changes in V2:
- New patch.

---
 xen/arch/riscv/include/asm/mm.h |   9 ++
 xen/arch/riscv/p2m.c            | 205 +++++++++++++++++++++++++-------
 2 files changed, 170 insertions(+), 44 deletions(-)
xen/arch/riscv/include/asm/mm.h +9 -0
index d5be328906..7cf0988f44 100644
@@ -150,6 +150,15 @@ struct page_info
             /* Order-size of the free chunk this page is the head of. */
             unsigned int order;
         } free;
+
+        /* Page is used to store metadata: p2m type. */
+        struct {
+            /*
+             * Pointer to a page which store metadata for an intermediate page
+             * table.
+             */
+            struct page_info *metadata;
+        } md;
     } v;
 
     union {
xen/arch/riscv/p2m.c +161 -44

392 lines not on this page · raw message

Signature · 1 line
2.50.1
#67 lore raw

PATCH v3 16/20 xen/riscv: Implement superpage splitting for p2m mappings

In reply to Oleksii Kurochko

Add support for down large memory mappings ("superpages") in the RISC-V p2m mapping so that smaller, more precise mappings ("finer-grained entries") can be inserted into lower levels of the page table hierarchy.

To implement that the following is done:
- Introduce p2m_split_superpage(): Recursively shatters a superpage into smaller page table entries down to the target level, preserving original permissions and attributes.
- p2m_set_entry() updated to invoke superpage splitting when inserting entries at lower levels within a superpage-mapped region.

This implementation is based on the ARM code, with modifications to the part that follows the BBM (break-before-make) approach, some parts are simplified as according to RISC-V spec:
It is permitted for multiple address-translation cache entries to co-exist for the same address. This represents the fact that in a conventional TLB hierarchy, it is possible for multiple entries to match a single address if, for example, a page is upgraded to a superpage without first clearing the original non-leaf PTE’s valid bit and executing an SFENCE.VMA with rs1=x0, or if multiple TLBs exist in parallel at a given level of the hierarchy. In this case, just as if an SFENCE.VMA is not executed between a write to the memory-management tables and subsequent implicit read of the same address: it is unpredictable whether the old non-leaf PTE or the new leaf PTE is used, but the behavior is otherwise well defined.
In contrast to the Arm architecture, where BBM is mandatory and failing to use it in some cases can lead to CPU instability, RISC-V guarantees stability, and the behavior remains safe — though unpredictable in terms of which translation will be used.

Additionally, the page table walk logic has been adjusted, as ARM uses the opposite number of levels compared to RISC-V.

---
Changes in V3:
- Move page_list_add(page, &p2m->pages) inside p2m_alloc_page().
- Use 'unsigned long' for local vairiable 'i' in p2m_split_superpage().
- Update the comment above if ( next_level != target ) in p2m_split_superpage().
- Reverse cycle to iterate through page table levels in p2m_set_entry().
- Update p2m_split_superpage() with the same changes which are done in the patch "P2M: Don't try to free the existing PTE if we can't allocate a new table".
---
Changes in V2:
- New patch. It was a part of a big patch "xen/riscv: implement p2m mapping functionality" which was splitted to smaller.
- Update the commit above the cycle which creates new page table as RISC-V travserse page tables in an opposite to ARM order.
- RISC-V doesn't require BBM so there is no needed for invalidating and TLB flushing before updating PTE.

---
 xen/arch/riscv/p2m.c | 118 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 117 insertions(+), 1 deletion(-)
xen/arch/riscv/p2m.c +117 -1
index e04cfde8c7..e9e6818da2 100644
@@ -539,6 +539,91 @@ static void p2m_free_subtree(struct p2m_domain *p2m,
     p2m_free_page(p2m, pg);
 }
 
+static bool p2m_split_superpage(struct p2m_domain *p2m, pte_t *entry,
+                                unsigned int level, unsigned int target,
+                                const unsigned int *offsets)
+{
+    struct page_info *page;
+    unsigned long i;
+    pte_t pte, *table;
+    bool rv = true;
+
+    /* Convenience aliases */
+    mfn_t mfn = pte_get_mfn(*entry);
+    unsigned int next_level = level - 1;
+    unsigned int level_order = XEN_PT_LEVEL_ORDER(next_level);
+
+    /*
+     * This should only be called with target != level and the entry is
+     * a superpage.
+     */
+    ASSERT(level > target);
+    ASSERT(pte_is_superpage(*entry, level));
+
+    page = p2m_alloc_page(p2m->domain);
+    if ( !page )
+    {
+        /*
+         * The caller is in charge to free the sub-tree.
+         * As we didn't manage to allocate anything, just tell the
+         * caller there is nothing to free by invalidating the PTE.
+         */
+        memset(entry, 0, sizeof(*entry));
+        return false;
+    }
+
+    table = __map_domain_page(page);
+
+    /*
+     * We are either splitting a second level 1G page into 512 first level
+     * 2M pages, or a first level 2M page into 512 zero level 4K pages.
+     */
+    for ( i = 0; i < XEN_PT_ENTRIES; i++ )
+    {
+        pte_t *new_entry = table + i;
+
+        /*
+         * Use the content of the superpage entry and override
+         * the necessary fields. So the correct permission are kept.
+         */
+        pte = *entry;
+        pte_set_mfn(&pte, mfn_add(mfn, i << level_order));
+
+        write_pte(new_entry, pte);
+    }
+
+    /*
+     * Shatter superpage in the page to the level we want to make the
+     * changes.
+     * This is done outside the loop to avoid checking the offset
+     * for every entry to know whether the entry should be shattered.
+     */
+    if ( next_level != target )
+        rv = p2m_split_superpage(p2m, table + offsets[next_level],
+                                 level - 1, target, offsets);
+
+    if ( p2m->clean_pte )
+        clean_dcache_va_range(table, PAGE_SIZE);
+
+    /*
+     * TODO: an inefficiency here: the caller almost certainly wants to map
+     *       the same page again, to update the one entry that caused the
+     *       request to shatter the page.
+     */
+    unmap_domain_page(table);
+
+    /*
+     * Even if we failed, we should (according to the current implemetation
+     * of a way how sub-tree is freed if p2m_split_superpage hasn't been
+     * finished fully) install the newly allocated PTE
+     * entry.
+     * The caller will be in charge to free the sub-tree.
+     */
+    p2m_write_pte(entry, page_to_p2m_table(page), p2m->clean_pte);
+
+    return rv;
+}
+
 /*
  * Insert an entry in the p2m. This should be called with a mapping
  * equal to a page/superpage.
@@ -603,7 +688,38 @@ static int p2m_set_entry(struct p2m_domain *p2m,
      */
     if ( level > target )
     {
-        panic("Shattering isn't implemented\n");
+        /* We need to split the original page. */
+        pte_t split_pte = *entry;
+
+        ASSERT(pte_is_superpage(*entry, level));
+
+        if ( !p2m_split_superpage(p2m, &split_pte, level, target, offsets) )
+        {
+            /* Free the allocated sub-tree */
+            p2m_free_subtree(p2m, split_pte, level);
+
+            rc = -ENOMEM;
+            goto out;
+        }
+
+        p2m_write_pte(entry, split_pte, p2m->clean_pte);
+
+        p2m->need_flush = true;
+
+        /* Then move to the level we want to make real changes */
+        for ( ; level > target; level-- )
+        {
+            rc = p2m_next_level(p2m, true, level, &table, offsets[level]);
+
+            /*
+             * The entry should be found and either be a table
+             * or a superpage if level 0 is not targeted
+             */
+            ASSERT(rc == P2M_TABLE_NORMAL ||
+                   (rc == P2M_TABLE_SUPER_PAGE && target > 0));
+        }
+
+        entry = table + offsets[level];
     }
 
     /*
Signature · 1 line
2.50.1
#74 lore raw

PATCH v3 18/20 xen/riscv: implement mfn_valid() and page reference, ownership handling helpers

In reply to Oleksii Kurochko

Implement the mfn_valid() macro to verify whether a given MFN is valid by checking that it falls within the range [start_page, max_page). These bounds are initialized based on the start and end addresses of RAM.

As part of this patch, start_page is introduced and initialized with the PFN of the first RAM page.
Also, initialize pdx_group_valid() by calling set_pdx_range() when memory banks are being mapped.

Also, after providing a non-stub implementation of the mfn_valid() macro,
the following compilation errors started to occur:
riscv64-linux-gnu-ld: prelink.o: in function `__next_node':
/build/xen/./include/xen/nodemask.h:202: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `get_free_buddy':
/build/xen/common/page_alloc.c:881: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `alloc_heap_pages':
/build/xen/common/page_alloc.c:1043: undefined reference to `page_get_owner_and_reference'
riscv64-linux-gnu-ld: /build/xen/common/page_alloc.c:1098: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `ns16550_interrupt':
/build/xen/drivers/char/ns16550.c:205: undefined reference to `get_page'
riscv64-linux-gnu-ld: ./.xen-syms.0: hidden symbol `page_get_owner_and_reference' isn't defined
riscv64-linux-gnu-ld: final link failed: bad value
make[2]: *** [arch/riscv/Makefile:35: xen-syms] Error 1
To resolve these errors, the following functions have also been introduced,
based on their Arm counterparts:
- page_get_owner_and_reference() and its variant to safely acquire a
reference to a page and retrieve its owner.
- A stub for page_is_ram_type() that currently always returns 0 and asserts unreachable, as RAM type checking is not yet implemented.

---
Changes in V3:
- Update defintion of mfn_valid().
- Use __ro_after_init for variable start_page.
- Drop ASSERT_UNREACHABLE() in page_get_owner_and_nr_reference().
- Update the comment inside do/while in page_get_owner_and_nr_reference().
- Define _PGC_static and drop "#ifdef CONFIG_STATIC_MEMORY" in put_page_nr().
- Initialize pdx_group_valid() by calling set_pdx_range() when memory banks are mapped.
- Drop page_get_owner_and_nr_reference() and implement page_get_owner_and_reference() without reusing of a page_get_owner_and_nr_reference() to avoid potential dead code.
- Move defintion of get_page() to "xen/riscv: add support of page lookup by GFN", where it is really used.
---
Changes in V2:
- New patch.

---
 xen/arch/riscv/include/asm/mm.h |  9 +++++++--
 xen/arch/riscv/mm.c             | 35 +++++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+), 2 deletions(-)
xen/arch/riscv/include/asm/mm.h +7 -2
index b914813e52..d5be328906 100644
@@ -5,6 +5,7 @@
 
 #include <public/xen.h>
 #include <xen/bug.h>
+#include <xen/compiler.h>
 #include <xen/const.h>
 #include <xen/mm-frame.h>
 #include <xen/pdx.h>
@@ -309,8 +310,12 @@ static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr)
 #define page_get_owner(p)    (p)->v.inuse.domain
 #define page_set_owner(p, d) ((p)->v.inuse.domain = (d))
 
-/* TODO: implement */
-#define mfn_valid(mfn) ({ (void)(mfn); 0; })
+extern unsigned long start_page;
+
+#define mfn_valid(mfn) ({                                           \
+    unsigned long mfn__ = mfn_x(mfn);                               \
+    likely((mfn__ >= start_page)) && likely(__mfn_valid(mfn__));    \
+})
 
 #define domain_set_alloc_bitsize(d) ((void)(d))
 #define domain_clamp_alloc_bitsize(d, b) ((void)(d), (b))
xen/arch/riscv/mm.c +35 -0
index 3cac16f1b7..3ad2b9cf93 100644
@@ -521,6 +521,8 @@ static void __init setup_directmap_mappings(unsigned long base_mfn,
 #error setup_{directmap,frametable}_mapping() should be implemented for RV_32
 #endif
 
+unsigned long __ro_after_init start_page;
+
 /*
  * Setup memory management
  *
@@ -570,9 +572,13 @@ void __init setup_mm(void)
         ram_end = max(ram_end, bank_end);
 
         setup_directmap_mappings(PFN_DOWN(bank_start), PFN_DOWN(bank_size));
+
+        set_pdx_range(paddr_to_pfn(bank_start), paddr_to_pfn(bank_end));
     }
 
     setup_frametable_mappings(ram_start, ram_end);
+
+    start_page = PFN_DOWN(ram_start);
     max_page = PFN_DOWN(ram_end);
 }
 
@@ -642,3 +648,32 @@ void put_page(struct page_info *page)
             free_domheap_page(page);
     }
 }
+
+int page_is_ram_type(unsigned long mfn, unsigned long mem_type)
+{
+    ASSERT_UNREACHABLE();
+
+    return 0;
+}
+
+struct domain *page_get_owner_and_reference(struct page_info *page)
+{
+    unsigned long x, y = page->count_info;
+    struct domain *owner;
+
+    do {
+        x = y;
+        /*
+         * Count ==  0: Page is not allocated, so we cannot take a reference.
+         * Count == -1: Reference count would wrap, which is invalid.
+         */
+        if ( unlikely(((x + 1) & PGC_count_mask) <= 1) )
+            return NULL;
+    }
+    while ( (y = cmpxchg(&page->count_info, x, x + 1)) != x );
+
+    owner = page_get_owner(page);
+    ASSERT(owner);
+
+    return owner;
+}
Signature · 1 line
2.50.1
#77 lore raw

PATCH v3 19/20 xen/riscv: add support of page lookup by GFN

In reply to Oleksii Kurochko

Introduce helper functions for safely querying the P2M (physical-to-machine) mapping:
- add p2m_read_lock(), p2m_read_unlock(), and p2m_is_locked() for managing P2M lock state.
- Implement p2m_get_entry() to retrieve mapping details for a given GFN, including MFN, page order, and validity.
- Add p2m_lookup() to encapsulate read-locked MFN retrieval.
- Introduce p2m_get_page_from_gfn() to convert a GFN into a page_info pointer, acquiring a reference to the page if valid.
- Introduce get_page().

Implementations are based on Arm's functions with some minor modifications:
- p2m_get_entry():
- Reverse traversal of page tables, as RISC-V uses the opposite level numbering compared to Arm.
- Removed the return of p2m_access_t from p2m_get_entry() since mem_access_settings is not introduced for RISC-V.
- Updated BUILD_BUG_ON() to check using the level 0 mask, which corresponds to Arm's THIRD_MASK.
- Replaced open-coded bit shifts with the BIT() macro.
- Other minor changes, such as using RISC-V-specific functions to validate P2M PTEs, and replacing Arm-specific GUEST_* macros with their RISC-V equivalents.

---
Changes in V3:
- Add is_p2m_foreign() macro and connected stuff.
- Change struct domain *d argument of p2m_get_page_from_gfn() to
struct p2m_domain.
- Update the comment above p2m_get_entry().
- s/_t/p2mt for local variable in p2m_get_entry().
- Drop local variable addr in p2m_get_entry() and use gfn_to_gaddr(gfn)
to define offsets array.
- Code style fixes.
- Update a check of rc code from p2m_next_level() in p2m_get_entry()
and drop "else" case.
- Do not call p2m_get_type() if p2m_get_entry()'s t argument is NULL.
- Use struct p2m_domain instead of struct domain for p2m_lookup() and
p2m_get_page_from_gfn().
- Move defintion of get_page() from "xen/riscv: implement mfn_valid() and page reference, ownership handling helpers"
---
Changes in V2:
- New patch.

---
 xen/arch/riscv/include/asm/p2m.h |  18 ++++
 xen/arch/riscv/mm.c              |  13 +++
 xen/arch/riscv/p2m.c             | 136 +++++++++++++++++++++++++++++++
 3 files changed, 167 insertions(+)
xen/arch/riscv/include/asm/p2m.h +18 -0
index fbc73448a7..dc3a77cc15 100644
@@ -202,6 +202,24 @@ static inline int p2m_is_write_locked(struct p2m_domain *p2m)
 
 unsigned long construct_hgatp(struct p2m_domain *p2m, uint16_t vmid);
 
+static inline void p2m_read_lock(struct p2m_domain *p2m)
+{
+    read_lock(&p2m->lock);
+}
+
+static inline void p2m_read_unlock(struct p2m_domain *p2m)
+{
+    read_unlock(&p2m->lock);
+}
+
+static inline int p2m_is_locked(struct p2m_domain *p2m)
+{
+    return rw_is_locked(&p2m->lock);
+}
+
+struct page_info *p2m_get_page_from_gfn(struct p2m_domain *p2m, gfn_t gfn,
+                                        p2m_type_t *t);
+
 #endif /* ASM__RISCV__P2M_H */
 
 /*
xen/arch/riscv/mm.c +13 -0
index 3ad2b9cf93..5e09d46a75 100644
@@ -677,3 +677,16 @@ struct domain *page_get_owner_and_reference(struct page_info *page)
 
     return owner;
 }
+
+bool get_page(struct page_info *page, const struct domain *domain)
+{
+    const struct domain *owner = page_get_owner_and_reference(page);
+
+    if ( likely(owner == domain) )
+        return true;
+
+    if ( owner != NULL )
+        put_page(page);
+
+    return false;
+}
xen/arch/riscv/p2m.c +136 -0

139 lines not on this page · raw message

Signature · 1 line
2.50.1
#39 lore raw

PATCH v3 9/20 xen/dom0less: abstract Arm-specific p2m type name for device MMIO mappings

In reply to Oleksii Kurochko

Rename p2m_mmio_direct_dev to a more architecture-neutral alias p2m_mmio_direct to avoid leaking Arm-specific naming into common Xen code, such as dom0less passthrough property handling.

This helps reduce platform-specific terminology in shared logic and improves clarity for future non-Arm ports (e.g. RISC-V or PowerPC).

No functional changes — the definition is preserved via a macro alias for Arm.

---
Changes in v3:
- New patch

---
 xen/arch/arm/include/asm/p2m.h          | 2 ++
 xen/common/device-tree/dom0less-build.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)
xen/arch/arm/include/asm/p2m.h +2 -0
index 2d53bf9b61..bade1eb71b 100644
@@ -137,6 +137,8 @@ typedef enum {
     p2m_max_real_type,  /* Types after this won't be store in the p2m */
 } p2m_type_t;
 
+#define p2m_mmio_direct p2m_mmio_direct_dev
+
 /* We use bitmaps and mask to handle groups of types */
 #define p2m_to_mask(_t) (1UL << (_t))
 
xen/common/device-tree/dom0less-build.c +1 -1
index 6bb038111d..5b97bf0343 100644
@@ -185,7 +185,7 @@ static int __init handle_passthrough_prop(struct kernel_info *kinfo,
                                gaddr_to_gfn(gstart),
                                PFN_DOWN(size),
                                maddr_to_mfn(mstart),
-                               p2m_mmio_direct_dev);
+                               p2m_mmio_direct);
         if ( res < 0 )
         {
             printk(XENLOG_ERR
Signature · 1 line
2.50.1
#45 lore raw

PATCH v3 11/20 xen/riscv: implement function to map memory in guest p2m

In reply to Oleksii Kurochko

Implement map_regions_p2mt() to map a region in the guest p2m with a specific p2m type. The memory attributes will be derived from the p2m type. This function is going to be called from dom0less common code.

To implement it, introduce:
- p2m_write_(un)lock() to ensure safe concurrent updates to the P2M. As part of this change, introduce p2m_tlb_flush_sync() and p2m_force_tlb_flush_sync().
- A stub for p2m_set_range() to map a range of GFNs to MFNs.
- p2m_insert_mapping().
- p2m_is_write_locked().

Drop guest_physmap_add_entry() and call map_regions_p2mt() directly from guest_physmap_add_page(), making guest_physmap_add_entry() unnecessary.

---
Changes in v3:
- Introudce p2m_write_lock() and p2m_is_write_locked().
- Introduce p2m_force_tlb_flush_sync() and p2m_flush_tlb() to flush TLBs after p2m table update.
- Change an argument of p2m_insert_mapping() from struct domain *d to p2m_domain *p2m.
- Drop guest_physmap_add_entry() and use map_regions_p2mt() to define guest_physmap_add_page().
- Add declaration of map_regions_p2mt() to asm/p2m.h.
- Rewrite commit message and subject.
- Drop p2m_access_t related stuff.
- Add defintion of p2m_is_write_locked().
---
Changes in v2:
- This changes were part of "xen/riscv: implement p2m mapping functionality". No additional signigicant changes were done.

---
 xen/arch/riscv/include/asm/p2m.h | 31 ++++++++++-----
 xen/arch/riscv/p2m.c             | 65 ++++++++++++++++++++++++++++++++
 2 files changed, 87 insertions(+), 9 deletions(-)
xen/arch/riscv/include/asm/p2m.h +22 -9
index 5f253da1dd..ada3c398b4 100644
@@ -121,21 +121,22 @@ static inline int guest_physmap_mark_populate_on_demand(struct domain *d,
     return -EOPNOTSUPP;
 }
 
-static inline int guest_physmap_add_entry(struct domain *d,
-                                          gfn_t gfn, mfn_t mfn,
-                                          unsigned long page_order,
-                                          p2m_type_t t)
-{
-    BUG_ON("unimplemented");
-    return -EINVAL;
-}
+/*
+ * Map a region in the guest p2m with a specific p2m type.
+ * The memory attributes will be derived from the p2m type.
+ */
+int map_regions_p2mt(struct domain *d,
+                     gfn_t gfn,
+                     unsigned long nr,
+                     mfn_t mfn,
+                     p2m_type_t p2mt);
 
 /* Untyped version for RAM only, for compatibility */
 static inline int __must_check
 guest_physmap_add_page(struct domain *d, gfn_t gfn, mfn_t mfn,
                        unsigned int page_order)
 {
-    return guest_physmap_add_entry(d, gfn, mfn, page_order, p2m_ram_rw);
+    return map_regions_p2mt(d, gfn, BIT(page_order, UL), mfn, p2m_ram_rw);
 }
 
 static inline mfn_t gfn_to_mfn(struct domain *d, gfn_t gfn)
@@ -159,6 +160,18 @@ static inline void p2m_altp2m_check(struct vcpu *v, uint16_t idx)
     /* Not supported on RISCV. */
 }
 
+static inline void p2m_write_lock(struct p2m_domain *p2m)
+{
+    write_lock(&p2m->lock);
+}
+
+void p2m_write_unlock(struct p2m_domain *p2m);
+
+static inline int p2m_is_write_locked(struct p2m_domain *p2m)
+{
+    return rw_is_write_locked(&p2m->lock);
+}
+
 unsigned long construct_hgatp(struct p2m_domain *p2m, uint16_t vmid);
 
 #endif /* ASM__RISCV__P2M_H */
xen/arch/riscv/p2m.c +65 -0

74 lines not on this page · raw message

Signature · 1 line
2.50.1
Acked-by on v3 1/20
#2 lore raw

Re: [PATCH v3 01/20] xen/riscv: implement sbi_remote_hfence_gvma()

In reply to Oleksii Kurochko
Quoted 9 lines · Oleksii Kurochko

Instruct the remote harts to execute one or more HFENCE.GVMA instructions, covering the range of guest physical addresses between start_addr and start_addr + size for all VMIDs.

The remote fence operation applies to the entire address space if either:
- start_addr and size are both 0, or
- size is equal to 2^XLEN-1.

However, ...

xen/arch/riscv/include/asm/sbi.h bool sbi_has_rfence(void); · line 95

Quoted 10 lines
xen/arch/riscv/include/asm/sbi.h +4 -0
@@ -89,6 +89,25 @@ bool sbi_has_rfence(void);
 int sbi_remote_sfence_vma(const cpumask_t *cpu_mask, vaddr_t start,
                           size_t size);
 
+/*
+ * Instructs the remote harts to execute one or more HFENCE.GVMA
+ * instructions, covering the range of guest physical addresses
+ * between start_addr and start_addr + size for all VMIDs.

... I'd like to ask that you avoid fuzzy terminology like this one. Afaict you mean [start, start + size). Help yourself and future readers by then also saying it exactly like this. (Happy to make a respective edit while committing.)

xen/arch/riscv/include/asm/sbi.h bool sbi_has_rfence(void); · line 98

Quoted 2 lines
xen/arch/riscv/include/asm/sbi.h +2 -0
+ * Returns 0 if IPI was sent to all the targeted harts successfully
+ * or negative value if start_addr or size is not valid.

This similarly is ambiguous: The union of the success case stated and the error case stated isn't obviously all possible states. The success statement in particular alludes to the possibility of an IPI not actually reaching its target.

xen/arch/riscv/include/asm/sbi.h bool sbi_has_rfence(void); · line 102

Quoted 3 lines
xen/arch/riscv/include/asm/sbi.h +3 -0
+ * The remote fence operation applies to the entire address space if either:
+ *  - start_addr and size are both 0, or
+ *  - size is equal to 2^XLEN-1.

Whose XLEN is this? The guest's? The host's? (I assume the latter, but it's not unambiguous, unless there's specific terminology that I'm unaware of, yet which would make this unambiguous.)

Jan

Acked-by on v3 2/20
#6 lore raw

Re: [PATCH v3 02/20] xen/riscv: introduce sbi_remote_hfence_gvma_vmid()

In reply to Oleksii Kurochko
Quoted 9 lines · Oleksii Kurochko

It instructs the remote harts to execute one or more HFENCE.GVMA instructions by making an SBI call, covering the range of guest physical addresses between start_addr and start_addr + size only for the given VMID.

The remote fence operation applies to the entire address space if either:
- start_addr and size are both 0, or
- size is equal to 2^XLEN-1.

with perhaps a similar on-commit edit as suggested for patch 1.

Jan

#40 lore raw

Re: [PATCH v3 09/20] xen/dom0less: abstract Arm-specific p2m type name for device MMIO mappings

In reply to Oleksii Kurochko
Quoted 11 lines · Oleksii Kurochko

Rename p2m_mmio_direct_dev to a more architecture-neutral alias p2m_mmio_direct to avoid leaking Arm-specific naming into common Xen code, such as dom0less passthrough property handling.

This helps reduce platform-specific terminology in shared logic and improves clarity for future non-Arm ports (e.g. RISC-V or PowerPC).

No functional changes — the definition is preserved via a macro alias for Arm.

I'm sorry, but no, ...

xen/arch/arm/include/asm/p2m.h typedef enum { · line 140

Quoted 7 lines
xen/arch/arm/include/asm/p2m.h +1 -0
@@ -137,6 +137,8 @@ typedef enum {
     p2m_max_real_type,  /* Types after this won't be store in the p2m */
 } p2m_type_t;
 
+#define p2m_mmio_direct p2m_mmio_direct_dev

... this isn't what I suggested. When Arm has three p2m_mmio_direct_*, randomly aliasing one to p2m_mmio_direct is imo more likely to create confusion than to help things. Imo you want to introduce ...

xen/common/device-tree/dom0less-build.c static int __init handle_passthrough_prop(struct kernel_info *kinfo, · line 188

Quoted 8 lines
xen/common/device-tree/dom0less-build.c +1 -1
@@ -185,7 +185,7 @@ static int __init handle_passthrough_prop(struct kernel_info *kinfo,
                                gaddr_to_gfn(gstart),
                                PFN_DOWN(size),
                                maddr_to_mfn(mstart),
-                               p2m_mmio_direct_dev);
+                               p2m_mmio_direct);

... a per-arch inline function which returns the type to use here. The name of the function would want to properly reflect the purpose; my limited DT knowledge may make arch_dt_passthrough_p2m_type() an entirely wrong suggestion.

Jan

#37 lore raw

Re: [PATCH v3 08/20] xen/riscv: add new p2m types and helper macros for type classification

In reply to Oleksii Kurochko
Quoted 8 lines · Oleksii Kurochko

- Extended p2m_type_t with additional types: p2m_mmio_direct, p2m_grant_map_{rw,ro}.
- Added macros to classify memory types: P2M_RAM_TYPES, P2M_GRANT_TYPES.
- Introduced helper predicates: p2m_is_ram(), p2m_is_any_ram().
- Define p2m_mmio_direct to tell handle_passthrough_prop() from common code how to map device memory.

Almost ready to be acked, except for ...

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +0 -0
@@ -62,8 +62,30 @@ struct p2m_domain {
 typedef enum {

xen/arch/riscv/include/asm/p2m.h struct p2m_domain { · line 72

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +6 -0
     p2m_invalid = 0,    /* Nothing mapped here */
     p2m_ram_rw,         /* Normal read/write domain RAM */
+    p2m_mmio_direct_io, /* Read/write mapping of genuine Device MMIO area,
+                           PTE_PBMT_IO will be used for such mappings */
+    p2m_ext_storage,    /* Following types'll be stored outsude PTE bits: */
+    p2m_grant_map_rw,   /* Read/write grant mapping */
+    p2m_grant_map_ro,   /* Read-only grant mapping */
 } p2m_type_t;
 
+#define p2m_mmio_direct p2m_mmio_direct_io

... this (see reply to patch 09).

xen/arch/riscv/include/asm/p2m.h struct p2m_domain { · line 75

Quoted 2 lines
xen/arch/riscv/include/asm/p2m.h +2 -0
+/* We use bitmaps and mask to handle groups of types */
+#define p2m_to_mask(t_) BIT(t_, UL)

I notice that you moved the underscore to the back of the parameters, compared to how Arm has it. I wonder though: What use are these underscores in the first place, here and below? (There are macros where conflicts could arise, but the ones here don't fall in that group, afaict.)

Jan

#9 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

In reply to Oleksii Kurochko
Quoted 4 lines · Oleksii Kurochko

Current implementation is based on x86's way to allocate VMIDs:
VMIDs partition the physical TLB. In the current implementation VMIDs are introduced to reduce the number of TLB flushes. Each time the guest's virtual address space changes,

virtual?

Quoted 5 lines

instead of flushing the TLB, a new VMID is
assigned. This reduces the number of TLB flushes to at most 1/#VMIDs. The biggest advantage is that hot parts of the hypervisor's code and data retain in the TLB.

Quoted 7 lines

VMIDs are a hart-local resource. As preemption of VMIDs is not possible, VMIDs are assigned in a round-robin scheme. To minimize the overhead of VMID invalidation, at the time of a TLB flush, VMIDs are tagged with a 64-bit generation. Only on a generation overflow the code needs to invalidate all VMID information stored at the VCPUs with are run on the specific physical processor. This overflow appears after about 2^80 host processor cycles,

Where's this number coming from? (If you provide numbers, I think they will want to be "reproducible" by the reader. Which I fear isn't the case here.)

xen/arch/riscv/setup.c void __init noreturn start_xen(unsigned long bootcpu_id, · line 152

Quoted 5 lines
xen/arch/riscv/setup.c +1 -0
@@ -148,6 +149,8 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
     console_init_postirq();
 
+    vmid_init();

This lives here only temporarily, I assume? Every hart will need to execute it, and hence (like we have it on x86) this may want to be a central place elsewhere.

Quoted 8 lines
xen/arch/riscv/vmid.c new file +5 -0
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <xen/domain.h>
+#include <xen/init.h>
+#include <xen/sections.h>

xen/arch/riscv/vmid.c line 15

Quoted 10 lines
xen/arch/riscv/vmid.c new file +10 -0
+#include <xen/lib.h>
+#include <xen/param.h>
+#include <xen/percpu.h>
+
+#include <asm/atomic.h>
+#include <asm/csr.h>
+#include <asm/flushtlb.h>
+
+/* Xen command-line option to enable VMIDs */
+static bool __read_mostly opt_vmid_enabled = true;

__ro_after_init ?

xen/arch/riscv/vmid.c line 21

Quoted 6 lines
xen/arch/riscv/vmid.c new file +6 -0
+boolean_param("vmid", opt_vmid_enabled);
+
+/*
+ * VMIDs partition the physical TLB. In the current implementation VMIDs are
+ * introduced to reduce the number of TLB flushes.  Each time the guest's
+ * virtual address space changes, instead of flushing the TLB, a new VMID is

The same odd "virtual" again? All the code here is about guest-physical, isn't it?

xen/arch/riscv/vmid.c line 33

Quoted 12 lines
xen/arch/riscv/vmid.c new file +12 -0
+ * assigned. This reduces the number of TLB flushes to at most 1/#VMIDs.
+ * The biggest advantage is that hot parts of the hypervisor's code and data
+ * retain in the TLB.
+ *
+ * Sketch of the Implementation:
+ *
+ * VMIDs are a hart-local resource.  As preemption of VMIDs is not possible,
+ * VMIDs are assigned in a round-robin scheme.  To minimize the overhead of
+ * VMID invalidation, at the time of a TLB flush, VMIDs are tagged with a
+ * 64-bit generation. Only on a generation overflow the code needs to
+ * invalidate all VMID information stored at the VCPUs with are run on the
+ * specific physical processor.  This overflow appears after about 2^80

And the same interesting number again.

xen/arch/riscv/vmid.c line 40

Quoted 7 lines
xen/arch/riscv/vmid.c new file +7 -0
+ * host processor cycles, so we do not optimize this case, but simply disable
+ * VMID useage to retain correctness.
+ */
+
+/* Per-Hart VMID management. */
+struct vmid_data {
+   uint64_t hart_vmid_generation;

Any reason not to simply use "generation"?

xen/arch/riscv/vmid.c line 48

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+   uint16_t next_vmid;
+   uint16_t max_vmid;
+   bool disabled;
+};
+
+static DEFINE_PER_CPU(struct vmid_data, vmid_data);
+
+static unsigned long vmidlen_detect(void)

__init ? Or wait, are you (deliberately) permitting different VMIDLEN across harts?

xen/arch/riscv/vmid.c line 50

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+{
+    unsigned long vmid_bits;

Why "long" (also for the function return type)?

xen/arch/riscv/vmid.c line 58

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear. In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

xen/arch/riscv/vmid.c line 77

Quoted 12 lines
xen/arch/riscv/vmid.c new file +9 -0
+    return vmid_bits;
+}
+
+void vmid_init(void)
+{
+    static bool g_disabled = false;
 
 
 
+    unsigned long vmid_len = vmidlen_detect();
+    struct vmid_data *data = &this_cpu(vmid_data);
+    unsigned long max_availalbe_bits = sizeof(data->max_vmid) << 3;

Nit: Typo in "available". Also now that we have it, better use BITS_PER_BYTE here?

xen/arch/riscv/vmid.c line 81

Quoted 3 lines
xen/arch/riscv/vmid.c new file +3 -0
+    if ( vmid_len > max_availalbe_bits )
+        panic("%s: VMIDLEN is bigger then a type which represent VMID: %lu(%lu)\n",
+              __func__, vmid_len, max_availalbe_bits);

This shouldn't be a runtime check imo. What you want to check (at build time) is that the bits set in HGATP_VMID_MASK can be held in ->max_vmid.

xen/arch/riscv/vmid.c line 84

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+    data->max_vmid = BIT(vmid_len, U) - 1;
+    data->disabled = !opt_vmid_enabled || (vmid_len <= 1);

Actually, what exactly does it mean that "VMIDs are disabled"? There's no enable bit that I could find anywhere. Isn't it rather that in this case you need to arrange to flush always on VM entry (or always after a P2M change, depending how the TLB is split between guest and host use)? If you look at vmx_vmenter_helper(), its flipping of SECONDARY_EXEC_ENABLE_VPID tweaks CPU behavior, such that the flush would be implicit (when the bit is off). I don't expect RISC-V has any such "implicit" flushing behavior?

xen/arch/riscv/vmid.c line 91

Quoted 6 lines
xen/arch/riscv/vmid.c new file +6 -0
+    if ( g_disabled != data->disabled )
+    {
+        printk("%s: VMIDs %sabled.\n", __func__,
+               data->disabled ? "dis" : "en");
+        if ( !g_disabled )
+            g_disabled = data->disabled;

This doesn't match x86 code. g_disabled is a tristate there, which only the boot CPU would ever write to.

A clear shortcoming of the x86 code (that you copied) is that the log message doesn't identify the CPU in question. A sequence of "disabled" and "enabled" could thus result, without the last one (or in fact any one) making clear what the overall state is. I think you want to avoid this from the beginning.

Jan

#18 lore raw

Re: [PATCH v3 04/20] xen/riscv: introduce things necessary for p2m initialization

In reply to Oleksii Kurochko
Quoted 19 lines · Oleksii Kurochko
xen/arch/riscv/include/asm/p2m.h +8 -0
@@ -3,11 +3,45 @@
 #define ASM__RISCV__P2M_H
 
 #include <xen/errno.h>
+#include <xen/mm.h>
+#include <xen/rwlock.h>
+#include <xen/types.h>
 
 #include <asm/page-bits.h>
 
 #define paddr_bits PADDR_BITS
 
+/* Get host p2m table */
+#define p2m_get_hostp2m(d) (&(d)->arch.p2m)
+
+/* Per-p2m-table state */
+struct p2m_domain {

xen/arch/riscv/include/asm/p2m.h line 28

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+    /*
+     * Lock that protects updates to the p2m.
+     */
+    rwlock_t lock;
+
+    /* Pages used to construct the p2m */
+    struct page_list_head pages;
+
+    /* Indicate if it is required to clean the cache when writing an entry */
+    bool clean_pte;

I'm a little puzzled by this field still being here, despite the extensive revlog commentary. If you really feel you need to keep it, please ...

xen/arch/riscv/include/asm/p2m.h line 42

Quoted 13 lines
xen/arch/riscv/include/asm/p2m.h +13 -0
+    /* Back pointer to domain */
+    struct domain *domain;
+
+    /*
+     * P2M updates may required TLBs to be flushed (invalidated).
+     *
+     * Flushes may be deferred by setting 'need_flush' and then flushing
+     * when the p2m write lock is released.
+     *
+     * If an immediate flush is required (e.g, if a super page is
+     * shattered), call p2m_tlb_flush_sync().
+     */
+    bool need_flush;

... group booleans together, for better packing.

Jan

Acked-by on v3 5/20
#21 lore raw

Re: [PATCH v3 05/20] xen/riscv: construct the P2M pages pool for guests

In reply to Oleksii Kurochko
Quoted 14 lines · Oleksii Kurochko

Implement p2m_set_allocation() to construct p2m pages pool for guests based on required number of pages.

This is implemented by:
- Adding a struct paging_domain which contains a freelist, a counter variable and a spinlock to struct arch_domain to indicate the free p2m pages and the number of p2m total pages in the p2m pages pool.
- Adding a helper p2m_set_allocation to set the p2m pages pool size. This helper should be called before allocating memory for a guest and is called from domain_p2m_set_allocation(), the latter is a part of common dom0less code.
- Adding paging_freelist_init() to struct paging_domain.

Quoted 1 line
#26 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Oleksii Kurochko
Quoted 16 lines · Oleksii Kurochko

Introduce support for allocating and initializing the root page table required for RISC-V stage-2 address translation.

To implement root page table allocation the following is introduced:
- p2m_get_clean_page() and p2m_alloc_root_table(), p2m_allocate_root() helpers to allocate and zero a 16 KiB root page table, as mandated by the RISC-V privileged specification for Sv32x4/Sv39x4/Sv48x4/Sv57x4 modes.
- Update p2m_init() to inititialize p2m_root_order.
- Add maddr_to_page() and page_to_maddr() macros for easier address manipulation.
- Introduce paging_ret_pages_to_domheap() to return some pages before allocate 16 KiB pages for root page table.
- Allocate root p2m table after p2m pool is initialized.
- Add construct_hgatp() to construct the hgatp register value based on p2m->root, p2m->hgatp_mode and VMID.

Imo for this to be complete, freeing of the root table also wants taking care of. Much like imo p2m_init() would better immediately be accompanied by the respective teardown function. Once you start using them, you want to use them in pairs, after all.

Quoted 25 lines
xen/arch/riscv/include/asm/riscv_encoding.h +3 -0
@@ -133,11 +133,13 @@
 #define HGATP_MODE_SV48X4		_UL(9)
 
 #define HGATP32_MODE_SHIFT		31
+#define HGATP32_MODE_MASK		_UL(0x80000000)
 #define HGATP32_VMID_SHIFT		22
 #define HGATP32_VMID_MASK		_UL(0x1FC00000)
 #define HGATP32_PPN			_UL(0x003FFFFF)
 
 #define HGATP64_MODE_SHIFT		60
+#define HGATP64_MODE_MASK		_ULL(0xF000000000000000)
 #define HGATP64_VMID_SHIFT		44
 #define HGATP64_VMID_MASK		_ULL(0x03FFF00000000000)
 #define HGATP64_PPN			_ULL(0x00000FFFFFFFFFFF)
@@ -170,6 +172,7 @@
 #define HGATP_VMID_SHIFT		HGATP64_VMID_SHIFT
 #define HGATP_VMID_MASK			HGATP64_VMID_MASK
 #define HGATP_MODE_SHIFT		HGATP64_MODE_SHIFT
+#define HGATP_MODE_MASK			HGATP64_MODE_MASK
 #else
 #define MSTATUS_SD			MSTATUS32_SD
 #define SSTATUS_SD			SSTATUS32_SD

xen/arch/riscv/include/asm/riscv_encoding.h line 190

Quoted 7 lines
xen/arch/riscv/include/asm/riscv_encoding.h +2 -0
@@ -181,8 +184,11 @@
 #define HGATP_VMID_SHIFT		HGATP32_VMID_SHIFT
 #define HGATP_VMID_MASK			HGATP32_VMID_MASK
 #define HGATP_MODE_SHIFT		HGATP32_MODE_SHIFT
+#define HGATP_MODE_MASK			HGATP32_MODE_MASK
 #endif
 
+#define GUEST_ROOT_PAGE_TABLE_SIZE	KB(16)

In another context I already mentioned that imo you want to be careful with the use of "guest" in identifiers. It's not the guest page tables which have an order-2 root table, but the P2M (Xen terminology) or G-stage / second stage (RISC-V spec terminology) ones. As long as you're only doing P2M work, this may not look significant. But once you actually start dealing with guest page tables, it easily can end up confusing.

xen/arch/riscv/p2m.c line 10

Quoted 13 lines
xen/arch/riscv/p2m.c +5 -0
@@ -1,8 +1,86 @@
+#include <xen/domain_page.h>
 #include <xen/mm.h>
 #include <xen/rwlock.h>
 #include <xen/sched.h>
 
 #include <asm/paging.h>
+#include <asm/p2m.h>
+#include <asm/riscv_encoding.h>
+
+unsigned int __read_mostly p2m_root_order;

If this is to be a variable at all, it ought to be __ro_after_init, and hence it shouldn't be written every time p2m_init() is run. If you want to to remain as a variable, what's wrong with

const unsigned int p2m_root_order = ilog2(GUEST_ROOT_PAGE_TABLE_SIZE) - PAGE_SHIFT;

or some such? But of course equally well you could have

#define P2M_ROOT_ORDER (ilog2(GUEST_ROOT_PAGE_TABLE_SIZE) - PAGE_SHIFT)

xen/arch/riscv/p2m.c line 20

Quoted 9 lines
xen/arch/riscv/p2m.c +9 -0
+static void clear_and_clean_page(struct page_info *page)
+{
+    clear_domain_page(page_to_mfn(page));
+
+    /*
+     * If the IOMMU doesn't support coherent walks and the p2m tables are
+     * shared between the CPU and IOMMU, it is necessary to clean the
+     * d-cache.
+     */

That is, ...

xen/arch/riscv/p2m.c line 21

Quoted 1 line
xen/arch/riscv/p2m.c +1 -0
+    clean_dcache_va_range(page, PAGE_SIZE);

... this call really wants to be conditional?

xen/arch/riscv/p2m.c line 24

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+}
+
+static struct page_info *p2m_allocate_root(struct domain *d)

With there also being p2m_alloc_root_table() and with that being the sole caller of the function here, I wonder: Is having this in a separate function really outweighing the possible confusion of which of the two functions to use?

Quoted 14 lines
xen/arch/riscv/p2m.c +14 -0
+{
+    struct page_info *page;
+
+    /*
+     * As mentioned in the Priviliged Architecture Spec (version 20240411)
+     * in Section 18.5.1, for the paged virtual-memory schemes  (Sv32x4,
+     * Sv39x4, Sv48x4, and Sv57x4), the root page table is 16 KiB and must
+     * be aligned to a 16-KiB boundary.
+     */
+    page = alloc_domheap_pages(d, P2M_ROOT_ORDER, MEMF_no_owner);
+    if ( !page )
+        return NULL;
+
+    for ( unsigned int i = 0; i < P2M_ROOT_PAGES; i++ )

xen/arch/riscv/p2m.c line 48

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+        clear_and_clean_page(page + i);
+
+    return page;
+}
+
+unsigned long construct_hgatp(struct p2m_domain *p2m, uint16_t vmid)
+{
+    unsigned long ppn;
+
+    ppn = PFN_DOWN(page_to_maddr(p2m->root)) & HGATP_PPN;

Why not page_to_pfn() or mfn_x(page_to_mfn())? I.e. why mix different groups of accessors?

As to "& HGATP_PPN" - that's making an assumption that you could avoid by using ...

xen/arch/riscv/p2m.c line 60

Quoted 11 lines
xen/arch/riscv/p2m.c +11 -0
+    /* TODO: add detection of hgatp_mode instead of hard-coding it. */
+#if RV_STAGE1_MODE == SATP_MODE_SV39
+    p2m->hgatp_mode = HGATP_MODE_SV39X4;
+#elif RV_STAGE1_MODE == SATP_MODE_SV48
+    p2m->hgatp_mode = HGATP_MODE_SV48X4;
+#else
+#   error "add HGATP_MODE"
+#endif
+
+    return ppn | MASK_INSR(p2m->hgatp_mode, HGATP_MODE_MASK) |
+                 MASK_INSR(vmid, HGATP_VMID_MASK);

... MASK_INSR() also on "ppn".

As to the writing of p2m->hgatp_mode - you don't want to do this here, when this is the function to calculate the value to put into hgatp. This field needs calculating only once, perhaps in p2m_init().

xen/arch/riscv/p2m.c line 67

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+static int p2m_alloc_root_table(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;
+    struct page_info *page;
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES;

Is this local variable really of any use?

xen/arch/riscv/p2m.c line 78

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;

Hmm, and the pool is then left shrunk by 4 pages?

Quoted 20 lines
xen/arch/riscv/paging.c +14 -0
@@ -54,6 +54,36 @@ int paging_freelist_init(struct domain *d, unsigned long pages,
 
     return 0;
 }
+
+bool paging_ret_pages_to_domheap(struct domain *d, unsigned int nr_pages)
+{
+    struct page_info *page;
+
+    ASSERT(spin_is_locked(&d->arch.paging.lock));
+
+    if ( ACCESS_ONCE(d->arch.paging.total_pages) < nr_pages )
+        return false;
+
+    for ( unsigned int i = 0; i < nr_pages; i++ )
+    {
+        /* Return memory to domheap. */
+        page = page_list_remove_head(&d->arch.paging.freelist);

xen/arch/riscv/paging.c int paging_freelist_init(struct domain *d, unsigned long pages, · line 80

Quoted 10 lines
xen/arch/riscv/paging.c +10 -0
+        if( page )
+        {
+            ACCESS_ONCE(d->arch.paging.total_pages)--;
+            free_domheap_page(page);
+        }
+        else
+        {
+            printk(XENLOG_ERR
+                   "Failed to free P2M pages, P2M freelist is empty.\n");
+            return false;

Looks pretty redundant with half of paging_freelist_init(), including the stray full stop in the log message.

Jan

#22 lore raw

Re: [PATCH v3 05/20] xen/riscv: construct the P2M pages pool for guests

In reply to Oleksii Kurochko

xen/arch/riscv/p2m.c int p2m_init(struct domain *d) · line 43

Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +7 -0
@@ -30,3 +34,18 @@ int p2m_init(struct domain *d)
 
     return 0;
 }
+
+/*
+ * Set the pool of pages to the required number of pages.
+ * Returns 0 for success, non-zero for failure.
+ * Call with d->arch.paging.lock held.
+ */
+int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)

Noticed only when looking at the subsequent patch: With this being ...

xen/arch/riscv/p2m.c int p2m_init(struct domain *d) · line 47

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+{
+    int rc;
+
+    if ( (rc = paging_freelist_init(d, pages, preempted)) )

... a caller of this function, the "init" in the name feels wrong.

Jan

#31 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Oleksii Kurochko
Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +11 -0
+static int p2m_alloc_root_table(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;
+    struct page_info *page;
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES;
+
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )

xen/arch/riscv/p2m.c line 83

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
+
+    p2m->root = page;
+
+    return 0;
+}

In the success case, shouldn't you bump the paging pool's total_pages by P2M_ROOT_PAGES? (As the freeing side is missing so far, it's not easy to tell whether there's [going to be] a balancing problem in the long run. In the short run there certainly is.)

Jan

#43 lore raw

Re: [PATCH v3 10/20] xen/riscv: introduce page_{get,set}_xenheap_gfn()

In reply to Oleksii Kurochko
Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/include/asm/mm.h +1 -0
@@ -12,6 +12,7 @@
 #include <xen/sections.h>
 #include <xen/types.h>
 
+#include <asm/cmpxchg.h>
 #include <asm/page.h>
 #include <asm/page-bits.h>
 

xen/arch/riscv/include/asm/mm.h static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr) · line 251

Quoted 7 lines
xen/arch/riscv/include/asm/mm.h +1 -3
@@ -247,9 +248,17 @@ static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr)
 #define PGT_writable_page PG_mask(1, 1)  /* has writable mappings?         */
 #define PGT_type_mask     PG_mask(1, 1)  /* Bits 31 or 63.                 */
 
-/* Count of uses of this frame as its current type. */
-#define PGT_count_width   PG_shift(2)
-#define PGT_count_mask    ((1UL << PGT_count_width) - 1)
+ /* 9-bit count of uses of this frame as its current type. */

Nit: Stray blank at start of line.

xen/arch/riscv/include/asm/mm.h static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr) · line 252

Quoted 1 line
xen/arch/riscv/include/asm/mm.h +1 -0
+#define PGT_count_mask    PG_mask(0x3FF, 10)

A 9-bit count corresponds to a mask of 0x1ff, doesn't it? With 0x3ff the count can spill over the type.

Jan

#3 lore raw

Re: [PATCH v3 01/20] xen/riscv: implement sbi_remote_hfence_gvma()

In reply to Jan Beulich
Quoted 20 lines · Jan Beulich
Quoted 9 lines · Oleksii Kurochko

Instruct the remote harts to execute one or more HFENCE.GVMA instructions, covering the range of guest physical addresses between start_addr and start_addr + size for all VMIDs.

The remote fence operation applies to the entire address space if either:
- start_addr and size are both 0, or
- size is equal to 2^XLEN-1.

However, ...

Quoted 6 lines
xen/arch/riscv/include/asm/sbi.h +0 -0
@@ -89,6 +89,25 @@ bool sbi_has_rfence(void);
  int sbi_remote_sfence_vma(const cpumask_t *cpu_mask, vaddr_t start,
                            size_t size);
 
Quoted 8 lines

xen/arch/riscv/include/asm/sbi.h bool sbi_has_rfence(void); · line 95

Quoted 4 lines
xen/arch/riscv/include/asm/sbi.h +4 -0
+/*
+ * Instructs the remote harts to execute one or more HFENCE.GVMA
+ * instructions, covering the range of guest physical addresses
+ * between start_addr and start_addr + size for all VMIDs.

... I'd like to ask that you avoid fuzzy terminology like this one. Afaict you mean [start, start + size). Help yourself and future readers by then also saying it exactly like this. (Happy to make a respective edit while committing.)

I just tried the following wording in SBI spec.

I agree that using [start, start+size) is clearer as each time I'm going to check SBI code to verify if 'start+size' is included or not.

It would be happy if you could update this part of commit message during commit.

Quoted 7 lines

xen/arch/riscv/include/asm/sbi.h bool sbi_has_rfence(void); · line 98

Quoted 3 lines
xen/arch/riscv/include/asm/sbi.h +2 -0
+ * Returns 0 if IPI was sent to all the targeted harts successfully
+ * or negative value if start_addr or size is not valid.

This similarly is ambiguous: The union of the success case stated and the error case stated isn't obviously all possible states. The success statement in particular alludes to the possibility of an IPI not actually reaching its target.

The same as above this is what SBI spec. tells.

I've not checked SBI code deeply, but it seems like the code is waiting while IPI will be reached as looking at the code:

	/**
	 * As this this function only handlers scalar values of hart mask, it must be
	 * set to all online harts if the intention is to send IPIs to all the harts.
	 * If hmask is zero, no IPIs will be sent.
	 */
	int sbi_ipi_send_many(ulong hmask, ulong hbase, u32 event, void *data)
	{
                ...
	
		/* Send IPIs */
		do {
			retry_needed = false;
			sbi_hartmask_for_each_hart(i, &target_mask) {
				rc = sbi_ipi_send(scratch, i, event, data);
				if (rc == SBI_IPI_UPDATE_RETRY)
					retry_needed = true;
				else
					sbi_hartmask_clear_hart(i, &target_mask);
			}
		} while (retry_needed);
	
		/* Sync IPIs */
		sbi_ipi_sync(scratch, event);
	
		return 0;
	}
and
	static int sbi_ipi_sync(struct sbi_scratch *scratch, u32 event)
	{
		const struct sbi_ipi_event_ops *ipi_ops;
	
		if ((SBI_IPI_EVENT_MAX <= event) ||
		    !ipi_ops_array[event])
			return SBI_EINVAL;
		ipi_ops = ipi_ops_array[event];
	
		if (ipi_ops->sync)
			ipi_ops->sync(scratch);
	
		return 0;
	}
which calls:
	static void tlb_sync(struct sbi_scratch *scratch)
	{
		atomic_t *tlb_sync =
				sbi_scratch_offset_ptr(scratch, tlb_sync_off);
	
		while (atomic_read(tlb_sync) > 0) {
			/*
			 * While we are waiting for remote hart to set the sync,
			 * consume fifo requests to avoid deadlock.
			 */
			tlb_process_once(scratch);
		}
	
		return;
	}
Quoted 7 lines

xen/arch/riscv/include/asm/sbi.h bool sbi_has_rfence(void); · line 102

Quoted 4 lines
xen/arch/riscv/include/asm/sbi.h +3 -0
+ * The remote fence operation applies to the entire address space if either:
+ *  - start_addr and size are both 0, or
+ *  - size is equal to 2^XLEN-1.

Whose XLEN is this? The guest's? The host's? (I assume the latter, but it's not unambiguous, unless there's specific terminology that I'm unaware of, yet which would make this unambiguous.)

RISC-V spec quite mixes the terminology (3.1.6.2. Base ISA Control in mstatus Register) around XLEN:
For RV64 harts, the SXL and UXL fields are WARL fields that control the value of XLEN for S-mode and U-mode, respectively. The encoding of these fields is the same as the MXL field of misa, shown in Table 9. The effective XLEN in S-mode and U-mode are termed SXLEN and UXLEN, respectively

Basically, RISC-V privileged architecture defines different XLEN values for various privilege modes:
 - MXLEN for Machine mode
- SXLEN for Supervisor mode.
 - HSXLEN for Hypervisor-Supervisor mode.
 - VSXLEN for Virtual Supervisor mode.

Considering that SBI is an API that is provided for S-mode I expect that XLEN = SXLEN in this case, but SBI spec. is using just XLEN.

~ Oleksii

#7 lore raw

Re: [PATCH v3 02/20] xen/riscv: introduce sbi_remote_hfence_gvma_vmid()

In reply to Jan Beulich
Quoted 5 lines · Jan Beulich
Quoted 4 lines · Oleksii Kurochko

It instructs the remote harts to execute one or more HFENCE.GVMA instructions by making an SBI call, covering the range of guest physical addresses between start_addr and start_addr + size only for the given VMID.

Quoted 7 lines
Quoted 5 lines

The remote fence operation applies to the entire address space if either:
- start_addr and size are both 0, or
- size is equal to 2^XLEN-1.

with perhaps a similar on-commit edit as suggested for patch 1.

I would happy if you could do that during merge. Thanks.

~ Oleksii

#4 lore raw

Re: [PATCH v3 01/20] xen/riscv: implement sbi_remote_hfence_gvma()

In reply to Oleksii Kurochko
Quoted 62 lines · Oleksii Kurochko
Quoted 7 lines · Jan Beulich
Quoted 2 lines · Oleksii Kurochko

+ * Returns 0 if IPI was sent to all the targeted harts successfully
+ * or negative value if start_addr or size is not valid.

This similarly is ambiguous: The union of the success case stated and the error case stated isn't obviously all possible states. The success statement in particular alludes to the possibility of an IPI not actually reaching its target.

The same as above this is what SBI spec. tells.

I've not checked SBI code deeply, but it seems like the code is waiting while IPI will be reached as looking at the code:

	/**
	 * As this this function only handlers scalar values of hart mask, it must be
	 * set to all online harts if the intention is to send IPIs to all the harts.
	 * If hmask is zero, no IPIs will be sent.
	 */
	int sbi_ipi_send_many(ulong hmask, ulong hbase, u32 event, void *data)
	{
                 ...
	
		/* Send IPIs */
		do {
			retry_needed = false;
			sbi_hartmask_for_each_hart(i, &target_mask) {
				rc = sbi_ipi_send(scratch, i, event, data);
				if (rc == SBI_IPI_UPDATE_RETRY)
					retry_needed = true;
				else
					sbi_hartmask_clear_hart(i, &target_mask);
			}
		} while (retry_needed);
	
		/* Sync IPIs */
		sbi_ipi_sync(scratch, event);
	
		return 0;
	}
and
	static int sbi_ipi_sync(struct sbi_scratch *scratch, u32 event)
	{
		const struct sbi_ipi_event_ops *ipi_ops;
	
		if ((SBI_IPI_EVENT_MAX <= event) ||
		    !ipi_ops_array[event])
			return SBI_EINVAL;
		ipi_ops = ipi_ops_array[event];
	
		if (ipi_ops->sync)
			ipi_ops->sync(scratch);
	
		return 0;
	}
which calls:
	static void tlb_sync(struct sbi_scratch *scratch)
	{
		atomic_t *tlb_sync =
				sbi_scratch_offset_ptr(scratch, tlb_sync_off);
	
		while (atomic_read(tlb_sync) > 0) {
			/*
Quoted 8 lines
			 * While we are waiting for remote hart to set the sync,
			 * consume fifo requests to avoid deadlock.
			 */
			tlb_process_once(scratch);
		}
	
		return;
	}

I'll leave that comment as-is then, even if I'm not really happy with it.

Quoted 21 lines
Quoted 6 lines
Quoted 3 lines

+ * The remote fence operation applies to the entire address space if either:
+ * - start_addr and size are both 0, or
+ * - size is equal to 2^XLEN-1.

Whose XLEN is this? The guest's? The host's? (I assume the latter, but it's not unambiguous, unless there's specific terminology that I'm unaware of, yet which would make this unambiguous.)

RISC-V spec quite mixes the terminology (3.1.6.2. Base ISA Control in mstatus Register) around XLEN:
For RV64 harts, the SXL and UXL fields are WARL fields that control the value of XLEN for S-mode and U-mode, respectively. The encoding of these fields is the same as the MXL field of misa, shown in Table 9. The effective XLEN in S-mode and U-mode are termed SXLEN and UXLEN, respectively

Basically, RISC-V privileged architecture defines different XLEN values for various privilege modes:
 - MXLEN for Machine mode
- SXLEN for Supervisor mode.
 - HSXLEN for Hypervisor-Supervisor mode.
 - VSXLEN for Virtual Supervisor mode.

Quoted 2 lines

Considering that SBI is an API that is provided for S-mode I expect that XLEN = SXLEN in this case, but SBI spec. is using just XLEN.

Very helpful.

Jan

#46 lore raw

Re: [PATCH v3 11/20] xen/riscv: implement function to map memory in guest p2m

In reply to Oleksii Kurochko
Quoted 4 lines · Oleksii Kurochko

Implement map_regions_p2mt() to map a region in the guest p2m with a specific p2m type. The memory attributes will be derived from the p2m type. This function is going to be called from dom0less common code.

s/is going to be/is/ ? Such a call exists already, after all.

Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +0 -0
@@ -121,21 +121,22 @@ static inline int guest_physmap_mark_populate_on_demand(struct domain *d,
     return -EOPNOTSUPP;
 }
 

xen/arch/riscv/include/asm/p2m.h static inline int guest_physmap_mark_populate_on_demand(struct domain *d, · line 125

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +2 -8
-static inline int guest_physmap_add_entry(struct domain *d,
-                                          gfn_t gfn, mfn_t mfn,
-                                          unsigned long page_order,
-                                          p2m_type_t t)
-{
-    BUG_ON("unimplemented");
-    return -EINVAL;
-}
+/*
+ * Map a region in the guest p2m with a specific p2m type.

What is "the guest p2m"? In your answer, please consider the possible (and at some point likely necessary) existence of altp2m and nestedp2m. In patch 04 you introduce p2m_get_hostp2m(), and I expect it's that what you mean here.

Quoted 4 lines
xen/arch/riscv/p2m.c +0 -0
@@ -9,6 +9,41 @@
 

xen/arch/riscv/p2m.c line 19

Quoted 10 lines
xen/arch/riscv/p2m.c +8 -0
 unsigned int __read_mostly p2m_root_order;
 
+/*
+ * Force a synchronous P2M TLB flush.
+ *
+ * Must be called with the p2m lock held.
+ */
+static void p2m_force_tlb_flush_sync(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;

Pointer-to-const please. Personally, given the implementation of this function (and also ...

xen/arch/riscv/p2m.c line 32

Quoted 12 lines
xen/arch/riscv/p2m.c +12 -0
+    ASSERT(p2m_is_write_locked(p2m));
+
+    sbi_remote_hfence_gvma(d->dirty_cpumask, 0, 0);
+
+    p2m->need_flush = false;
+}
+
+void p2m_tlb_flush_sync(struct p2m_domain *p2m)
+{
+    if ( p2m->need_flush )
+        p2m_force_tlb_flush_sync(p2m);
+}

... this one) I'd further ask for the function parameters to also be pointer-to-const, but Andrew may object to that. Andrew - it continues to be unclear to me under what conditions you agree with adding const, and under what conditions you would object to me asking for such. Please can you take the time to clarify this?

xen/arch/riscv/p2m.c line 39

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+/* Unlock the flush and do a P2M TLB flush if necessary */
+void p2m_write_unlock(struct p2m_domain *p2m)
+{
+    /*
+     * The final flush is done with the P2M write lock taken to avoid
+     * someone else modifying the P2M wbefore the TLB invalidation has

Nit: Stray 'w'.

xen/arch/riscv/p2m.c line 42

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+     * completed.
+     */
+    p2m_tlb_flush_sync(p2m);

Wasn't the plan to have this be conditional?

Quoted 24 lines
xen/arch/riscv/p2m.c +20 -0
@@ -139,3 +174,33 @@ int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)
 
     return 0;
 }
+
+static int p2m_set_range(struct p2m_domain *p2m,
+                         gfn_t sgfn,
+                         unsigned long nr,
+                         mfn_t smfn,
+                         p2m_type_t t)
+{
+    return -EOPNOTSUPP;
+}
+
+static int p2m_insert_mapping(struct p2m_domain *p2m, gfn_t start_gfn,
+                              unsigned long nr, mfn_t mfn, p2m_type_t t)
+{
+    int rc;
+
+    p2m_write_lock(p2m);
+    rc = p2m_set_range(p2m, start_gfn, nr, mfn, t);
+    p2m_write_unlock(p2m);
+
+    return rc;

xen/arch/riscv/p2m.c int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 206

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+}
+
+int map_regions_p2mt(struct domain *d,
+                     gfn_t gfn,
+                     unsigned long nr,
+                     mfn_t mfn,
+                     p2m_type_t p2mt)
+{
+    return p2m_insert_mapping(p2m_get_hostp2m(d), gfn, nr, mfn, p2mt);
+}

And eventually both helper functions will gain further callers? Otherwise it's a little hard to see why they would both need to be separate functions.

Jan

#52 lore raw

Re: [PATCH v3 12/20] xen/riscv: implement p2m_set_range()

In reply to Oleksii Kurochko
Quoted 1 line · Oleksii Kurochko

This patch introduces p2m_set_range() and its core helper p2m_set_entry() for

Nit: This patch doesn't introduce p2m_set_range(); it merely fleshes it out.

xen/arch/riscv/include/asm/p2m.h line 16

Quoted 13 lines
xen/arch/riscv/include/asm/p2m.h +2 -0
@@ -7,11 +7,13 @@
 #include <xen/rwlock.h>
 #include <xen/types.h>
 
+#include <asm/page.h>
 #include <asm/page-bits.h>
 
 extern unsigned int p2m_root_order;
 #define P2M_ROOT_ORDER  p2m_root_order
 #define P2M_ROOT_PAGES  BIT(P2M_ROOT_ORDER, U)
+#define P2M_ROOT_LEVEL  HYP_PT_ROOT_LEVEL

I think I commented on this before, and I would have hoped for at least a remark in the description to appear (perhaps even a comment here): It's okay(ish) to tie these together for now, but in the longer run I don't expect this is going to be wanted. If e.g. we ran Xen in Sv57 mode, there would be no reason at all to force all P2Ms to use 5 levels of page tables.

Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +2 -0
@@ -175,13 +179,257 @@ int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)
     return 0;
 }
 
+/*
+ * Find and map the root page table. The caller is responsible for

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 193

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+ * unmapping the table.
+ *
+ * The function will return NULL if the offset into the root table is
+ * invalid.
+ */
+static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
+{
+    unsigned long root_table_indx;
+
+    root_table_indx = gfn_x(gfn) >> XEN_PT_LEVEL_ORDER(P2M_ROOT_LEVEL);

Right now page table layouts / arrangements are indeed similar enough to share accessor constructs. Nevertheless I find it problematic (doc-wise at the very least) that a Xen page table construct is used to access a P2M page table. If and when these needed to be decoupled, it would likely help of the distinction was already made, by - for now - simply introducing aliases (here e.g. P2M_LEVEL_ORDER(), expanding to XEN_PT_LEVEL_ORDER() for the time being).

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 204

Quoted 11 lines
xen/arch/riscv/include/asm/p2m.h +11 -0
+    if ( root_table_indx >= P2M_ROOT_PAGES )
+        return NULL;
+
+    return __map_domain_page(p2m->root + root_table_indx);
+}
+
+static inline void p2m_write_pte(pte_t *p, pte_t pte, bool clean_pte)
+{
+    write_pte(p, pte);
+    if ( clean_pte )
+        clean_dcache_va_range(p, sizeof(*p));

Not necessarily for right away, but if multiple adjacent PTEs are written without releasing the lock, this then redundant cache flushing can be a performance issue.

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 211

Quoted 7 lines
xen/arch/riscv/include/asm/p2m.h +7 -0
+}
+
+static inline void p2m_clean_pte(pte_t *p, bool clean_pte)
+{
+    pte_t pte;
+
+    memset(&pte, 0, sizeof(pte));

Why memset()? Why not simply give the variable an appropriate initializer? Or use ...

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 212

Quoted 1 line
xen/arch/riscv/include/asm/p2m.h +1 -0
+    p2m_write_pte(p, pte, clean_pte);

... a compound literal here, like you do ...

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 219

Quoted 7 lines
xen/arch/riscv/include/asm/p2m.h +7 -0
+}
+
+static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+
+    return (pte_t) { .pte = 0 };

... here? (Just {} would also do, if I'm not mistaken.)

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 229

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+}
+
+#define P2M_TABLE_MAP_NONE 0
+#define P2M_TABLE_MAP_NOMEM 1
+#define P2M_TABLE_SUPER_PAGE 2
+#define P2M_TABLE_NORMAL 3
+
+/*
+ * Take the currently mapped table, find the corresponding the entry
+ * corresponding to the GFN, and map the next table, if available.

Nit: Double "corresponding".

Quoted 34 lines
xen/arch/riscv/include/asm/p2m.h +34 -0
+ * The previous table will be unmapped if the next level was mapped
+ * (e.g P2M_TABLE_NORMAL returned).
+ *
+ * `alloc_tbl` parameter indicates whether intermediate tables should
+ * be allocated when not present.
+ *
+ * Return values:
+ *  P2M_TABLE_MAP_NONE: a table allocation isn't permitted.
+ *  P2M_TABLE_MAP_NOMEM: allocating a new page failed.
+ *  P2M_TABLE_SUPER_PAGE: next level or leaf mapped normally.
+ *  P2M_TABLE_NORMAL: The next entry points to a superpage.
+ */
+static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl,
+                          unsigned int level, pte_t **table,
+                          unsigned int offset)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+
+    return P2M_TABLE_MAP_NONE;
+}
+
+/* Free pte sub-tree behind an entry */
+static void p2m_free_subtree(struct p2m_domain *p2m,
+                             pte_t entry, unsigned int level)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+}
+
+/*
+ * Insert an entry in the p2m. This should be called with a mapping
+ * equal to a page/superpage.
+ */
+static int p2m_set_entry(struct p2m_domain *p2m,
+                           gfn_t gfn,

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 273

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+                           unsigned long page_order,
+                           mfn_t mfn,
+                           p2m_type_t t)
+{
+    unsigned int level;
+    unsigned int target = page_order / PAGETABLE_ORDER;
+    pte_t *entry, *table, orig_pte;
+    int rc;
+    /* A mapping is removed if the MFN is invalid. */
+    bool removing_mapping = mfn_eq(mfn, INVALID_MFN);

Comment and code don't fit together. Many MFNs are invalid (any for which mfn_valid() returns false), yet you only check for INVALID_MFN here.

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 282

Quoted 9 lines
xen/arch/riscv/include/asm/p2m.h +9 -0
+    DECLARE_OFFSETS(offsets, gfn_to_gaddr(gfn));
+
+    ASSERT(p2m_is_write_locked(p2m));
+
+    /*
+     * Check if the level target is valid: we only support
+     * 4K - 2M - 1G mapping.
+     */
+    ASSERT((target <= 2) && !(page_order % PAGETABLE_ORDER));

If you think you need to check this, don't you also want to check that GFN and MFN (the latter if it isn't INVALID_MFN) fit the requested order?

Quoted 13 lines
xen/arch/riscv/include/asm/p2m.h +13 -0
+    table = p2m_get_root_pointer(p2m, gfn);
+    if ( !table )
+        return -EINVAL;
+
+    for ( level = P2M_ROOT_LEVEL; level > target; level-- )
+    {
+        /*
+         * Don't try to allocate intermediate page table if the mapping
+         * is about to be removed.
+         */
+        rc = p2m_next_level(p2m, !removing_mapping,
+                            level, &table, offsets[level]);
+        if ( (rc == P2M_TABLE_MAP_NONE) || (rc == P2M_TABLE_MAP_NOMEM) )

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 305

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+        {
+            rc = (rc == P2M_TABLE_MAP_NONE) ? -ENOENT : -ENOMEM;
+            /*
+             * We are here because p2m_next_level has failed to map
+             * the intermediate page table (e.g the table does not exist
+             * and they p2m tree is read-only). It is a valid case
+             * when removing a mapping as it may not exist in the
+             * page table. In this case, just ignore it.
+             */
+            rc = removing_mapping ?  0 : rc;

Nit: Stray blank.

Quoted 50 lines
xen/arch/riscv/include/asm/p2m.h +50 -0
+            goto out;
+        }
+
+        if ( rc != P2M_TABLE_NORMAL )
+            break;
+    }
+
+    entry = table + offsets[level];
+
+    /*
+     * If we are here with level > target, we must be at a leaf node,
+     * and we need to break up the superpage.
+     */
+    if ( level > target )
+    {
+        panic("Shattering isn't implemented\n");
+    }
+
+    /*
+     * We should always be there with the correct level because all the
+     * intermediate tables have been installed if necessary.
+     */
+    ASSERT(level == target);
+
+    orig_pte = *entry;
+
+    if ( removing_mapping )
+        p2m_clean_pte(entry, p2m->clean_pte);
+    else
+    {
+        pte_t pte = p2m_pte_from_mfn(mfn, t);
+
+        p2m_write_pte(entry, pte, p2m->clean_pte);
+
+        p2m->max_mapped_gfn = gfn_max(p2m->max_mapped_gfn,
+                                      gfn_add(gfn, BIT(page_order, UL) - 1));
+        p2m->lowest_mapped_gfn = gfn_min(p2m->lowest_mapped_gfn, gfn);
+    }
+
+    p2m->need_flush = true;
+
+    /*
+     * Currently, the infrastructure required to enable CONFIG_HAS_PASSTHROUGH
+     * is not ready for RISC-V support.
+     *
+     * When CONFIG_HAS_PASSTHROUGH=y, iommu_iotlb_flush() should be done
+     * here.
+     */
+#ifdef CONFIG_HAS_PASSTHROUGH
+#   error "add code to flush IOMMU TLB"

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 365

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+#endif
+
+    rc = 0;
+
+    /*
+     * Free the entry only if the original pte was valid and the base
+     * is different (to avoid freeing when permission is changed).
+     */
+    if ( pte_is_valid(orig_pte) &&
+         !mfn_eq(pte_get_mfn(*entry), pte_get_mfn(orig_pte)) )

I'm puzzled by this 2nd check: A permission change would - I expect - only occur to a leaf entry. If the new entry is a super-page one and the old wasn't, don't you still need to free the sub-tree, no matter whether the MFNs are the same? Plus consider the special case of MFN 0: If you clear an entry using MFN 0, you will find old and new PTEs' both having the same MFN.

Quoted 25 lines
xen/arch/riscv/include/asm/p2m.h +18 -1
 static int p2m_set_range(struct p2m_domain *p2m,
                          gfn_t sgfn,
                          unsigned long nr,
                          mfn_t smfn,
                          p2m_type_t t)
 {
-    return -EOPNOTSUPP;
+    int rc = 0;
+    unsigned long left = nr;
+
+    /*
+     * Any reference taken by the P2M mappings (e.g. foreign mapping) will
+     * be dropped in relinquish_p2m_mapping(). As the P2M will still
+     * be accessible after, we need to prevent mapping to be added when the
+     * domain is dying.
+     */
+    if ( unlikely(p2m->domain->is_dying) )
+        return -EACCES;
+
+    while ( left )
+    {
+        unsigned long order = p2m_mapping_order(sgfn, smfn, left);
+
+        rc = p2m_set_entry(p2m, sgfn, order, smfn, t);
+        if ( rc )

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 399

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+            break;
+
+        sgfn = gfn_add(sgfn, BIT(order, UL));
+        if ( !mfn_eq(smfn, INVALID_MFN) )
+           smfn = mfn_add(smfn, BIT(order, UL));
+
+        left -= BIT(order, UL);
+    }
+
+    return !left ? 0 : left == nr ? rc : (nr - left);

The function returning "int", you may be truncating the return value here. In the worst case indicating success (0) or an error (negative) when some of the upper bits were set.

Also looks like you could get away with a single conditional operator here:

    return !left || left == nr ? rc : (nr - left);

Jan

#10 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

In reply to Jan Beulich
Quoted 6 lines · Jan Beulich
Quoted 4 lines · Oleksii Kurochko

Current implementation is based on x86's way to allocate VMIDs:
VMIDs partition the physical TLB. In the current implementation VMIDs are introduced to reduce the number of TLB flushes. Each time the guest's virtual address space changes,

virtual?

I assumed that originally it meant that from Xen point of view it could be called guest's virtual as guest doesn't really work with real physical address, but it seems like it would be more clear to use guest-physical as you suggested below.

Quoted 12 lines
Quoted 5 lines

instead of flushing the TLB, a new VMID is
assigned. This reduces the number of TLB flushes to at most 1/#VMIDs. The biggest advantage is that hot parts of the hypervisor's code and data retain in the TLB.

Quoted 7 lines

VMIDs are a hart-local resource. As preemption of VMIDs is not possible, VMIDs are assigned in a round-robin scheme. To minimize the overhead of VMID invalidation, at the time of a TLB flush, VMIDs are tagged with a 64-bit generation. Only on a generation overflow the code needs to invalidate all VMID information stored at the VCPUs with are run on the specific physical processor. This overflow appears after about 2^80 host processor cycles,

Quoted 2 lines

Where's this number coming from? (If you provide numbers, I think they will want to be "reproducible" by the reader. Which I fear isn't the case here.)

The 2^80 cycles (based on x86-related numbers) result from:
1. And VM-Entry/-Exit cycle takes at least 1800 cycles (approximated by 2^10)
2. We have 64 ASIDs (2^6)
3. 2^64 generations.
I removed this part of the comment earlier because I assumed that the first item is quite CPU-dependent, even for x86, let alone for other architectures, which may have a different number (?).
However, this part of the comment was reintroduced during one of the merges.

Quoted 8 lines

xen/arch/riscv/setup.c void __init noreturn start_xen(unsigned long bootcpu_id, · line 152

Quoted 5 lines
xen/arch/riscv/setup.c +1 -0
@@ -148,6 +149,8 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
      console_init_postirq();
 
+    vmid_init();

This lives here only temporarily, I assume? Every hart will need to execute it, and hence (like we have it on x86) this may want to be a central place elsewhere.

I haven’t checked how it is done on x86; I probably should.

I planned to call it for each hart separately during secondary hart bring-up, since accessing the|hgatp| register of a hart is required to detect|VMIDLEN|. Therefore,|vmid_init()| should be called for secondary harts when their initialization code starts executing.

Quoted 11 lines
Quoted 11 lines
xen/arch/riscv/vmid.c new file +8 -0
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <xen/domain.h>
+#include <xen/init.h>
+#include <xen/sections.h>
+#include <xen/lib.h>
+#include <xen/param.h>
+#include <xen/percpu.h>
Quoted 8 lines

xen/arch/riscv/vmid.c line 15

Quoted 7 lines
xen/arch/riscv/vmid.c new file +7 -0
+
+#include <asm/atomic.h>
+#include <asm/csr.h>
+#include <asm/flushtlb.h>
+
+/* Xen command-line option to enable VMIDs */
+static bool __read_mostly opt_vmid_enabled = true;

__ro_after_init ?

Agree, __ro_afer_init would be better.

Quoted 8 lines

xen/arch/riscv/vmid.c line 21

Quoted 6 lines
xen/arch/riscv/vmid.c new file +6 -0
+boolean_param("vmid", opt_vmid_enabled);
+
+/*
+ * VMIDs partition the physical TLB. In the current implementation VMIDs are
+ * introduced to reduce the number of TLB flushes.  Each time the guest's
+ * virtual address space changes, instead of flushing the TLB, a new VMID is

The same odd "virtual" again? All the code here is about guest-physical, isn't it?

Answered above.

Quoted 12 lines

xen/arch/riscv/vmid.c line 33

Quoted 12 lines
xen/arch/riscv/vmid.c new file +12 -0
+ * assigned. This reduces the number of TLB flushes to at most 1/#VMIDs.
+ * The biggest advantage is that hot parts of the hypervisor's code and data
+ * retain in the TLB.
+ *
+ * Sketch of the Implementation:
+ *
+ * VMIDs are a hart-local resource.  As preemption of VMIDs is not possible,
+ * VMIDs are assigned in a round-robin scheme.  To minimize the overhead of
+ * VMID invalidation, at the time of a TLB flush, VMIDs are tagged with a
+ * 64-bit generation. Only on a generation overflow the code needs to
+ * invalidate all VMID information stored at the VCPUs with are run on the
+ * specific physical processor.  This overflow appears after about 2^80
Quoted 1 line

And the same interesting number again.

Answered above.

Quoted 8 lines

xen/arch/riscv/vmid.c line 40

Quoted 7 lines
xen/arch/riscv/vmid.c new file +7 -0
+ * host processor cycles, so we do not optimize this case, but simply disable
+ * VMID useage to retain correctness.
+ */
+
+/* Per-Hart VMID management. */
+struct vmid_data {
+   uint64_t hart_vmid_generation;

Any reason not to simply use "generation"?

No specific reason for that, it could be renamed to "generation".

Quoted 10 lines

xen/arch/riscv/vmid.c line 48

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+   uint16_t next_vmid;
+   uint16_t max_vmid;
+   bool disabled;
+};
+
+static DEFINE_PER_CPU(struct vmid_data, vmid_data);
+
+static unsigned long vmidlen_detect(void)

__init ? Or wait, are you (deliberately) permitting different VMIDLEN across harts?

All what I was able in RISC-V spec is that:
The number of VMID bits is UNSPECIFIED and may be zero. The number of implemented VMID bits, termed VMIDLEN, may be determined by writing one to every bit position in the VMID field, then reading back the value in hgatp to see which bit positions in the VMID field hold a one. The least- significant bits of VMID are implemented first: that is, if VMIDLEN > 0, VMID[VMIDLEN-1:0] is writable. The maximal value of VMIDLEN, termed VMIDMAX, is 7 for Sv32x4 or 14 for Sv39x4, Sv48x4, and Sv57x4..
And I couldn't find explicitly that VMIDLEN will be the same across harts.

Therefore, IMO, while the specification doesn't guarantee VMID will be different, the "unspecified" nature and the per-hart discovery mechanism of VMIDLEN in the hgatp CSR allows for VMIDLEN to be different on different harts in an implementation without violating the RISC-V privileged specification.

Quoted 4 lines

xen/arch/riscv/vmid.c line 50

Quoted 3 lines
xen/arch/riscv/vmid.c new file +2 -0
+{
+    unsigned long vmid_bits;

Why "long" (also for the function return type)?

Because csr_read() returns unsigned long as HGATP register has 'unsigned long' length.

But it could be done in this way:

    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
    vmid_bits =  MASK_EXTR(csr_read(CSR_HGATP), HGATP_VMID_MASK);
    vmid_bits = ffs_g(vmid_bits);
    csr_write(CSR_HGATP, old);

And then use uint16_t for vmid_bits and use uin16_t as a return type.

Quoted 19 lines

xen/arch/riscv/vmid.c line 58

Quoted 9 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();
Quoted 2 lines

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear.

It could be an issue (or, at least, it is recommended) when hgatp.MODE is changed:
If hgatp.MODE is changed for a given VMID, an HFENCE.GVMA with rs1=x0 (and rs2 set to either x0 or the VMID) must be executed to order subsequent guest translations with the MODE change—even if the old MODE or new MODE is Bare.
On other hand it is guaranteed that, at least, on Reset (and so I assume for power on) that:
If the hypervisor extension is implemented, the hgatp.MODE and vsatp.MODE fields are reset to 0.

So it seems like if no guest is ran then there is no need even to write hgatp.MODE as zero, but it might be sense to do that explicitly just to be sure.

I thought it was possible to have a running guest and perform a CPU hotplug. In that case, I expect that during the hotplug,|vmidlen_detect()| will be called and return the|vmid_bits| value, which is used as the active VMID. At that moment, the local TLB could be speculatively polluted, I think. Likely, it makes sense to call vmidlen_detect() only once for each hart during initial bringup.

Quoted 5 lines

In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

It make sense (but I don't know if it is a possible case) to be sure that HGATP.MODE remains the same, so there is no need to have TLB flush. If HGATP.MODE is changed then it will be needed to do TLB flush as I mentioned above.

If we agreed to keep local_hfence_gvma_all() then I think it isn't really any sense to restore 'old' or OR-ing it with HGATP_VMID_MASK.

Generally if 'old' is guaranteed to be zero (and, probably, it makes sense to check that in vmidlen_detect() and panic if it isn't zero) and if vmidlen_detect() function will be called before any guest domain(s) will be ran then I could agree that we don't need local_hfence_gvma_all() here.

As an option we can do local_hfence_gvma_all() only if 'old' value wasn't set to zero.

Does it make sense?

Quoted 12 lines

xen/arch/riscv/vmid.c line 77

Quoted 10 lines
xen/arch/riscv/vmid.c new file +9 -0
+    return vmid_bits;
+}
+
+void vmid_init(void)
+{
+    static bool g_disabled = false;
+    unsigned long vmid_len = vmidlen_detect();
+    struct vmid_data *data = &this_cpu(vmid_data);
+    unsigned long max_availalbe_bits = sizeof(data->max_vmid) << 3;

Nit: Typo in "available". Also now that we have it, better use BITS_PER_BYTE here?

Sure, I will use BITS_PER_BYTE.

Quoted 6 lines

xen/arch/riscv/vmid.c line 81

Quoted 4 lines
xen/arch/riscv/vmid.c new file +3 -0
+    if ( vmid_len > max_availalbe_bits )
+        panic("%s: VMIDLEN is bigger then a type which represent VMID: %lu(%lu)\n",
+              __func__, vmid_len, max_availalbe_bits);

This shouldn't be a runtime check imo. What you want to check (at build time) is that the bits set in HGATP_VMID_MASK can be held in ->max_vmid.

Oh, I just noticed that this check isn't even really correct because of data->max_vmid is inited after this check.

Anyway, build time check would be better.

Quoted 7 lines

xen/arch/riscv/vmid.c line 84

Quoted 3 lines
xen/arch/riscv/vmid.c new file +2 -0
+    data->max_vmid = BIT(vmid_len, U) - 1;
+    data->disabled = !opt_vmid_enabled || (vmid_len <= 1);

Actually, what exactly does it mean that "VMIDs are disabled"? There's no enable bit that I could find anywhere. Isn't it rather that in this case you need to arrange to flush always on VM entry (or always after a P2M change, depending how the TLB is split between guest and host use)?

"VMIDs are disabled" here means that TLB flush will happen each time p2m is changed.

Quoted 4 lines

If you look at vmx_vmenter_helper(), its flipping of SECONDARY_EXEC_ENABLE_VPID tweaks CPU behavior, such that the flush would be implicit (when the bit is off). I don't expect RISC-V has any such "implicit" flushing behavior?

RISC-V relies on explicit software-managed fence instructions for TLB flushing.

It seems like vmid_handle_vmenter() should be updated then to return true if VMIDs are disabled:
bool vmid_handle_vmenter(struct vcpu_vmid *vmid)

  {
      struct vmid_data *data = &this_cpu(vmid_data);

...

      /*
       * When we assign VMID 1, flush all TLB entries as we are starting a new
       * generation, and all old VMID allocations are now stale.
       */
      return (vmid->vmid == 1);

disabled:

      vmid->vmid = 0;

- return 0;
+ return true;
}

Quoted 9 lines

xen/arch/riscv/vmid.c line 91

Quoted 7 lines
xen/arch/riscv/vmid.c new file +6 -0
+    if ( g_disabled != data->disabled )
+    {
+        printk("%s: VMIDs %sabled.\n", __func__,
+               data->disabled ? "dis" : "en");
+        if ( !g_disabled )
+            g_disabled = data->disabled;

This doesn't match x86 code. g_disabled is a tristate there, which only the boot CPU would ever write to.

Why g_disabled is written only by boot CPU? Does x86 have only two options or VMIDs are enabled for all CPUs or it is disabled for all of them?

For RISC-V as I mentioned above it is needed to check all harts as the spec. doesn't explicitly mention that VMIDLEN is equal for all harts...

Quoted 6 lines

A clear shortcoming of the x86 code (that you copied) is that the log message doesn't identify the CPU in question. A sequence of "disabled" and "enabled" could thus result, without the last one (or in fact any one) making clear what the overall state is. I think you want to avoid this from the beginning.

... Thereby it seems like declaration of g_disabled should be moved outside vmid_init() function and add a new function which will return g_disabled value (or just make g_disabled not static and rename to something like g_vmids_disabled).

And the print message once after all harts will be initialized, somewhere in setup.c in start_xen() after:

for_each_present_cpu ( i )
{
if( (num_online_cpus()< nr_cpu_ids)&& !cpu_online(i)) {
intret = cpu_up(i);
if( ret != 0)
printk("Failed to bring up CPU %u (error %d)\n", i, ret); }
}
(RISC-V doesn't have such code at the moment)

~ Oleksii

#19 lore raw

Re: [PATCH v3 04/20] xen/riscv: introduce things necessary for p2m initialization

In reply to Jan Beulich
Quoted 24 lines · Jan Beulich
Quoted 23 lines · Oleksii Kurochko
xen/arch/riscv/include/asm/p2m.h +12 -0
@@ -3,11 +3,45 @@
  #define ASM__RISCV__P2M_H
 
  #include <xen/errno.h>
+#include <xen/mm.h>
+#include <xen/rwlock.h>
+#include <xen/types.h>
 
  #include <asm/page-bits.h>
 
  #define paddr_bits PADDR_BITS
 
+/* Get host p2m table */
+#define p2m_get_hostp2m(d) (&(d)->arch.p2m)
+
+/* Per-p2m-table state */
+struct p2m_domain {
+    /*
+     * Lock that protects updates to the p2m.
+     */
+    rwlock_t lock;
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h line 28

Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +6 -0
+
+    /* Pages used to construct the p2m */
+    struct page_list_head pages;
+
+    /* Indicate if it is required to clean the cache when writing an entry */
+    bool clean_pte;

I'm a little puzzled by this field still being here, despite the extensive revlog commentary. If you really feel you need to keep it, please ...

I think still it could be useful to have clean_pte, but likely not in this patch. I will move an introduction of it to one of the next patch where it is started really to be used.

Quoted 14 lines
Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +3 -0
+    /* Back pointer to domain */
+    struct domain *domain;
+

xen/arch/riscv/include/asm/p2m.h line 42

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+    /*
+     * P2M updates may required TLBs to be flushed (invalidated).
+     *
+     * Flushes may be deferred by setting 'need_flush' and then flushing
+     * when the p2m write lock is released.
+     *
+     * If an immediate flush is required (e.g, if a super page is
+     * shattered), call p2m_tlb_flush_sync().
+     */
+    bool need_flush;
Quoted 1 line

... group booleans together, for better packing.

I will take that into account. Thanks.

~ Oleksii

#23 lore raw

Re: [PATCH v3 05/20] xen/riscv: construct the P2M pages pool for guests

In reply to Jan Beulich
Quoted 14 lines · Jan Beulich

xen/arch/riscv/p2m.c int p2m_init(struct domain *d) · line 43

Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +7 -0
@@ -30,3 +34,18 @@ int p2m_init(struct domain *d)
 
      return 0;
  }
+
+/*
+ * Set the pool of pages to the required number of pages.
+ * Returns 0 for success, non-zero for failure.
+ * Call with d->arch.paging.lock held.
+ */
+int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)

Noticed only when looking at the subsequent patch: With this being ...

Quoted 5 lines

xen/arch/riscv/p2m.c int p2m_init(struct domain *d) · line 47

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+{
+    int rc;
+
+    if ( (rc = paging_freelist_init(d, pages, preempted)) )

... a caller of this function, the "init" in the name feels wrong.

I thought about paging_freelist_alloc(), but it feels wrong too as it sounds like freelist is being allocated inside this functions, but what really happens that pages are allocated and just added/removed to/from freelist.

Maybe something like paging_freelist_resize() or *_adjust() would be better?

~ Oleksii

#11 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

In reply to Oleksii Kurochko
Quoted 11 lines · Oleksii Kurochko
Quoted 9 lines · Jan Beulich

xen/arch/riscv/setup.c void __init noreturn start_xen(unsigned long bootcpu_id, · line 152

Quoted 5 lines · Oleksii Kurochko
xen/arch/riscv/setup.c +1 -0
@@ -148,6 +149,8 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
      console_init_postirq();
 
+    vmid_init();

This lives here only temporarily, I assume? Every hart will need to execute it, and hence (like we have it on x86) this may want to be a central place elsewhere.

Quoted 6 lines

I haven’t checked how it is done on x86; I probably should.

I planned to call it for each hart separately during secondary hart bring-up, since accessing the|hgatp| register of a hart is required to detect|VMIDLEN|. Therefore,|vmid_init()| should be called for secondary harts when their initialization code starts executing.

But is this going to be the only per-hart thing that will need doing? Otherwise the same larger "container" function may want calling instead.

Quoted 14 lines
Quoted 3 lines

xen/arch/riscv/vmid.c line 48

Quoted 1 line
xen/arch/riscv/vmid.c new file +1 -0
+static unsigned long vmidlen_detect(void)

__init ? Or wait, are you (deliberately) permitting different VMIDLEN across harts?

All what I was able in RISC-V spec is that:
The number of VMID bits is UNSPECIFIED and may be zero. The number of implemented VMID bits, termed VMIDLEN, may be determined by writing one to every bit position in the VMID field, then reading back the value in hgatp to see which bit positions in the VMID field hold a one. The least- significant bits of VMID are implemented first: that is, if VMIDLEN > 0, VMID[VMIDLEN-1:0] is writable. The maximal value of VMIDLEN, termed VMIDMAX, is 7 for Sv32x4 or 14 for Sv39x4, Sv48x4, and Sv57x4..
And I couldn't find explicitly that VMIDLEN will be the same across harts.

Quoted 5 lines

Therefore, IMO, while the specification doesn't guarantee VMID will be different, the "unspecified" nature and the per-hart discovery mechanism of VMIDLEN in the hgatp CSR allows for VMIDLEN to be different on different harts in an implementation without violating the RISC-V privileged specification.

Okay, since that's easily feasible with the present implementation, why not keep it like that then.

Quoted 6 lines
Quoted 3 lines

xen/arch/riscv/vmid.c line 50

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+{
+    unsigned long vmid_bits;

Why "long" (also for the function return type)?

Because csr_read() returns unsigned long as HGATP register has 'unsigned long' length.

Oh, right, I should have commented on the function return type only. Yet then I also can't resist stating that this kind of use of a variable, which initially is assigned a value that doesn't really fit its name, is easily misleading towards giving such comments.

Quoted 6 lines

But it could be done in this way:

     csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
     vmid_bits =  MASK_EXTR(csr_read(CSR_HGATP), HGATP_VMID_MASK);
     vmid_bits = ffs_g(vmid_bits);
     csr_write(CSR_HGATP, old);

And then use uint16_t for vmid_bits and use uin16_t as a return type.

Please check ./CODING_STYLE again as to the use of fixed-width types.

Quoted 32 lines
Quoted 18 lines

xen/arch/riscv/vmid.c line 58

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();
Quoted 2 lines

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear.

It could be an issue (or, at least, it is recommended) when hgatp.MODE is changed:
If hgatp.MODE is changed for a given VMID, an HFENCE.GVMA with rs1=x0 (and rs2 set to either x0 or the VMID) must be executed to order subsequent guest translations with the MODE change—even if the old MODE or new MODE is Bare.
On other hand it is guaranteed that, at least, on Reset (and so I assume for power on) that:
If the hypervisor extension is implemented, the hgatp.MODE and vsatp.MODE fields are reset to 0.

Quoted 5 lines

So it seems like if no guest is ran then there is no need even to write hgatp.MODE as zero, but it might be sense to do that explicitly just to be sure.

I thought it was possible to have a running guest and perform a CPU hotplug.

But that guest will run on another hart.

Quoted 5 lines

In that case, I expect that during the hotplug,|vmidlen_detect()| will be called and return the|vmid_bits| value, which is used as the active VMID. At that moment, the local TLB could be speculatively polluted, I think. Likely, it makes sense to call vmidlen_detect() only once for each hart during initial bringup.

That may bring you more problems than it solves. You'd need to stash away the value originally read somewhere. And that somewhere isn't per-CPU data.

Quoted 19 lines
Quoted 5 lines

In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

It make sense (but I don't know if it is a possible case) to be sure that HGATP.MODE remains the same, so there is no need to have TLB flush. If HGATP.MODE is changed then it will be needed to do TLB flush as I mentioned above.

If we agreed to keep local_hfence_gvma_all() then I think it isn't really any sense to restore 'old' or OR-ing it with HGATP_VMID_MASK.

Generally if 'old' is guaranteed to be zero (and, probably, it makes sense to check that in vmidlen_detect() and panic if it isn't zero) and if vmidlen_detect() function will be called before any guest domain(s) will be ran then I could agree that we don't need local_hfence_gvma_all() here.

Quoted 4 lines

As an option we can do local_hfence_gvma_all() only if 'old' value wasn't set to zero.

Does it make sense?

Well - I'd like the pre-conditions to be understood better. For example, can a hart really speculate into guest mode, when the hart is only in the process of being brought up?

Quoted 9 lines
Quoted 6 lines

xen/arch/riscv/vmid.c line 84

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+    data->max_vmid = BIT(vmid_len, U) - 1;
+    data->disabled = !opt_vmid_enabled || (vmid_len <= 1);

Actually, what exactly does it mean that "VMIDs are disabled"? There's no enable bit that I could find anywhere. Isn't it rather that in this case you need to arrange to flush always on VM entry (or always after a P2M change, depending how the TLB is split between guest and host use)?

"VMIDs are disabled" here means that TLB flush will happen each time p2m is changed.

That's better described as "VMIDs aren't used" then?

Quoted 11 lines
Quoted 8 lines

xen/arch/riscv/vmid.c line 91

Quoted 6 lines
xen/arch/riscv/vmid.c new file +6 -0
+    if ( g_disabled != data->disabled )
+    {
+        printk("%s: VMIDs %sabled.\n", __func__,
+               data->disabled ? "dis" : "en");
+        if ( !g_disabled )
+            g_disabled = data->disabled;

This doesn't match x86 code. g_disabled is a tristate there, which only the boot CPU would ever write to.

Why g_disabled is written only by boot CPU? Does x86 have only two options or VMIDs are enabled for all CPUs or it is disabled for all of them?

Did you look at the x86 code again, or the patch that I sent for it?

Quoted 2 lines

For RISC-V as I mentioned above it is needed to check all harts as the spec. doesn't explicitly mention that VMIDLEN is equal for all harts...

Even if in practice x86 systems are symmetric in this regard, you will have seen that we support varying values there as well. Up to and including ASIDs being in use on some CPUs, but not on others. So that code can serve as a reference for you, I think.

Quoted 10 lines
Quoted 5 lines

A clear shortcoming of the x86 code (that you copied) is that the log message doesn't identify the CPU in question. A sequence of "disabled" and "enabled" could thus result, without the last one (or in fact any one) making clear what the overall state is. I think you want to avoid this from the beginning.

... Thereby it seems like declaration of g_disabled should be moved outside vmid_init() function and add a new function which will return g_disabled value (or just make g_disabled not static and rename to something like g_vmids_disabled).

No, why? While I didn't Cc you on my patch submission, I specifically replied to it with you (alone) on the To: list, just so you can look there first before suggesting (sorry) odd things.

Jan

#24 lore raw

Re: [PATCH v3 05/20] xen/riscv: construct the P2M pages pool for guests

In reply to Oleksii Kurochko
Quoted 22 lines · Oleksii Kurochko
Quoted 14 lines · Jan Beulich

xen/arch/riscv/p2m.c int p2m_init(struct domain *d) · line 43

Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +7 -0
@@ -30,3 +34,18 @@ int p2m_init(struct domain *d)
 
      return 0;
  }
+
+/*
+ * Set the pool of pages to the required number of pages.
+ * Returns 0 for success, non-zero for failure.
+ * Call with d->arch.paging.lock held.
+ */
+int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)

Noticed only when looking at the subsequent patch: With this being ...

Quoted 5 lines

xen/arch/riscv/p2m.c int p2m_init(struct domain *d) · line 47

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+{
+    int rc;
+
+    if ( (rc = paging_freelist_init(d, pages, preempted)) )

... a caller of this function, the "init" in the name feels wrong.

Quoted 5 lines

I thought about paging_freelist_alloc(), but it feels wrong too as it sounds like freelist is being allocated inside this functions, but what really happens that pages are allocated and just added/removed to/from freelist.

Maybe something like paging_freelist_resize() or *_adjust() would be better?

Yes; whichever of the two you like better.

Jan

#57 lore raw

Re: [PATCH v3 13/20] xen/riscv: Implement p2m_free_subtree() and related helpers

In reply to Oleksii Kurochko
Quoted 24 lines · Oleksii Kurochko
xen/arch/riscv/include/asm/p2m.h +10 -0
@@ -79,10 +79,20 @@ typedef enum {
     p2m_ext_storage,    /* Following types'll be stored outsude PTE bits: */
     p2m_grant_map_rw,   /* Read/write grant mapping */
     p2m_grant_map_ro,   /* Read-only grant mapping */
+    p2m_map_foreign_rw, /* Read/write RAM pages from foreign domain */
+    p2m_map_foreign_ro, /* Read-only RAM pages from foreign domain */
 } p2m_type_t;
 
 #define p2m_mmio_direct p2m_mmio_direct_io
 
+/*
+ * Bits 8 and 9 are reserved for use by supervisor software;
+ * the implementation shall ignore this field.
+ * We are going to use to save in these bits frequently used types to avoid
+ * get/set of a type from radix tree.
+ */
+#define P2M_TYPE_PTE_BITS_MASK  0x300
+
 /* We use bitmaps and mask to handle groups of types */
 #define p2m_to_mask(t_) BIT(t_, UL)
 

xen/arch/riscv/include/asm/p2m.h typedef enum { · line 106

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +1 -0
@@ -93,10 +103,16 @@ typedef enum {
 #define P2M_GRANT_TYPES (p2m_to_mask(p2m_grant_map_rw) | \
                          p2m_to_mask(p2m_grant_map_ro))
 
+                            /* Foreign mappings types */

Nit: Why so far to the right?

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 205

Quoted 12 lines
xen/arch/riscv/p2m.c +6 -0
@@ -197,6 +197,16 @@ static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
     return __map_domain_page(p2m->root + root_table_indx);
 }
 
+static p2m_type_t p2m_get_type(const pte_t pte)
+{
+    p2m_type_t type = MASK_EXTR(pte.pte, P2M_TYPE_PTE_BITS_MASK);
+
+    if ( type == p2m_ext_storage )
+        panic("unimplemented\n");

That is, as per p2m.h additions you pretend to add support for foreign types here, but then you don't?

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 269

Quoted 13 lines
xen/arch/riscv/p2m.c +9 -0
@@ -248,11 +258,136 @@ static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl,
     return P2M_TABLE_MAP_NONE;
 }
 
+static void p2m_put_foreign_page(struct page_info *pg)
+{
+    /*
+     * It’s safe to call put_page() here because arch_flush_tlb_mask()
+     * will be invoked if the page is reallocated before the end of
+     * this loop, which will trigger a flush of the guest TLBs.
+     */
+    put_page(pg);
+}

How can one know the comment is true? arch_flush_tlb_mask() still lives in stubs.c, and hence what it is eventually going to do (something like Arm's vs more like x86'es) is entirely unknown right now.

Quoted 9 lines
xen/arch/riscv/p2m.c +9 -0
+/* Put any references on the single 4K page referenced by mfn. */
+static void p2m_put_4k_page(mfn_t mfn, p2m_type_t type)
+{
+    /* TODO: Handle other p2m types */
+
+    if ( p2m_is_foreign(type) )
+    {
+        ASSERT(mfn_valid(mfn));
+        p2m_put_foreign_page(mfn_to_page(mfn));

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 289

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    }
+
+    /*
+     * Detect the xenheap page and mark the stored GFN as invalid.
+     * We don't free the underlying page until the guest requested to do so.
+     * So we only need to tell the page is not mapped anymore in the P2M by
+     * marking the stored GFN as invalid.
+     */
+    if ( p2m_is_ram(type) && is_xen_heap_mfn(mfn) )
+        page_set_xenheap_gfn(mfn_to_page(mfn), INVALID_GFN);

Isn't this for grants? p2m_is_ram() doesn't cover p2m_grant_map_*.

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+}
+
+/* Put any references on the superpage referenced by mfn. */
+static void p2m_put_2m_superpage(mfn_t mfn, p2m_type_t type)
+{

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 304

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    struct page_info *pg;
+    unsigned int i;
+
+    ASSERT(mfn_valid(mfn));
+
+    pg = mfn_to_page(mfn);
+
+    for ( i = 0; i < XEN_PT_ENTRIES; i++, pg++ )
+        p2m_put_foreign_page(pg);
+}

In p2m_put_4k_page() you check the type, whereas here you don't.

Quoted 13 lines
xen/arch/riscv/p2m.c +13 -0
+/* Put any references on the page referenced by pte. */
+static void p2m_put_page(const pte_t pte, unsigned int level)
+{
+    mfn_t mfn = pte_get_mfn(pte);
+    p2m_type_t p2m_type = p2m_get_type(pte);
+
+    ASSERT(pte_is_valid(pte));
+
+    /*
+     * TODO: Currently we don't handle level 2 super-page, Xen is not
+     * preemptible and therefore some work is needed to handle such
+     * superpages, for which at some point Xen might end up freeing memory
+     * and therefore for such a big mapping it could end up in a very long

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 328

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+     * operation.
+     */
+    switch ( level )
+    {
+    case 1:
+        return p2m_put_2m_superpage(mfn, p2m_type);
+
+    case 0:
+        return p2m_put_4k_page(mfn, p2m_type);
+    }

Yet despite the comment not even an assertion for level 2 and up?

Quoted 5 lines
xen/arch/riscv/p2m.c +0 -1
 /* Free pte sub-tree behind an entry */
 static void p2m_free_subtree(struct p2m_domain *p2m,
                              pte_t entry, unsigned int level)
 {
-    panic("%s: hasn't been implemented yet\n", __func__);

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 351

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    unsigned int i;
+    pte_t *table;
+    mfn_t mfn;
+    struct page_info *pg;
+
+    /* Nothing to do if the entry is invalid. */
+    if ( !pte_is_valid(entry) )
+        return;
+
+    if ( pte_is_superpage(entry, level) || (level == 0) )

Perhaps swap the two conditions around?

Quoted 11 lines
xen/arch/riscv/p2m.c +11 -0
+    {
+#ifdef CONFIG_IOREQ_SERVER
+        /*
+         * If this gets called then either the entry was replaced by an entry
+         * with a different base (valid case) or the shattering of a superpage
+         * has failed (error case).
+         * So, at worst, the spurious mapcache invalidation might be sent.
+         */
+        if ( p2m_is_ram(p2m_get_type(p2m, entry)) &&
+             domain_has_ioreq_server(p2m->domain) )
+            ioreq_request_mapcache_invalidate(p2m->domain);

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 372

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+#endif
+
+        p2m_put_page(entry, level);
+
+        return;
+    }
+
+    table = map_domain_page(pte_get_mfn(entry));
+    for ( i = 0; i < XEN_PT_ENTRIES; i++ )
+        p2m_free_subtree(p2m, table[i], level - 1);

In p2m_put_page() you comment towards concerns for level >= 2; no similar concerns for the resulting recursion here?

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+    unmap_domain_page(table);
+
+    /*
+     * Make sure all the references in the TLB have been removed before
+     * freing the intermediate page table.
+     * XXX: Should we defer the free of the page table to avoid the
+     * flush?

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 390

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+     */
+    p2m_tlb_flush_sync(p2m);
+
+    mfn = pte_get_mfn(entry);
+    ASSERT(mfn_valid(mfn));
+
+    pg = mfn_to_page(mfn);
+
+    page_list_del(pg, &p2m->pages);
+    p2m_free_page(p2m, pg);

Once again I wonder whether this code path was actually tested: p2m_free_page() also invokes page_list_del(), and double deletions typically won't end very well.

Jan

#12 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

In reply to Jan Beulich
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Oleksii Kurochko
Quoted 9 lines · Jan Beulich

xen/arch/riscv/setup.c void __init noreturn start_xen(unsigned long bootcpu_id, · line 152

Quoted 5 lines · Oleksii Kurochko
xen/arch/riscv/setup.c +1 -0
@@ -148,6 +149,8 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
       console_init_postirq();
 
+    vmid_init();

This lives here only temporarily, I assume? Every hart will need to execute it, and hence (like we have it on x86) this may want to be a central place elsewhere.

Quoted 8 lines
Quoted 6 lines

I haven’t checked how it is done on x86; I probably should.

I planned to call it for each hart separately during secondary hart bring-up, since accessing the|hgatp| register of a hart is required to detect|VMIDLEN|. Therefore,|vmid_init()| should be called for secondary harts when their initialization code starts executing.

But is this going to be the only per-hart thing that will need doing? Otherwise the same larger "container" function may want calling instead.

Yes, it is going to be the only per-hart operation.

There is|__cpu_up()| (not yet upstreamed [1]), which calls

|sbi_hsm_hart_start(hartid, boot_addr, hsm_data)| to start a hart, and I planned
to place|vmid_init()| somewhere in the code executed at|boot_addr|.

[1]https://gitlab.com/xen-project/people/olkur/xen/-/blob/latest/xen/arch/riscv/smpboot.c#L40

Quoted 10 lines
Quoted 5 lines
Quoted 3 lines

xen/arch/riscv/vmid.c line 50

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+{
+    unsigned long vmid_bits;

Why "long" (also for the function return type)?

Because csr_read() returns unsigned long as HGATP register has 'unsigned long' length.

Oh, right, I should have commented on the function return type only. Yet then I also can't resist stating that this kind of use of a variable, which initially is assigned a value that doesn't really fit its name, is easily misleading towards giving such comments.

Quoted 7 lines
Quoted 6 lines

But it could be done in this way:

      csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
      vmid_bits =  MASK_EXTR(csr_read(CSR_HGATP), HGATP_VMID_MASK);
      vmid_bits = ffs_g(vmid_bits);
      csr_write(CSR_HGATP, old);

And then use uint16_t for vmid_bits and use uin16_t as a return type.

Please check ./CODING_STYLE again as to the use of fixed-width types.

I meant unsigned short, uint16_t was just short to write. I'll try to be more specific.

Quoted 65 lines
Quoted 32 lines
Quoted 19 lines

xen/arch/riscv/vmid.c line 58

Quoted 9 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();
Quoted 2 lines

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear.

It could be an issue (or, at least, it is recommended) when hgatp.MODE is changed:
If hgatp.MODE is changed for a given VMID, an HFENCE.GVMA with rs1=x0 (and rs2 set to either x0 or the VMID) must be executed to order subsequent guest translations with the MODE change—even if the old MODE or new MODE is Bare.
On other hand it is guaranteed that, at least, on Reset (and so I assume for power on) that:
If the hypervisor extension is implemented, the hgatp.MODE and vsatp.MODE fields are reset to 0.

Quoted 5 lines

So it seems like if no guest is ran then there is no need even to write hgatp.MODE as zero, but it might be sense to do that explicitly just to be sure.

I thought it was possible to have a running guest and perform a CPU hotplug.

But that guest will run on another hart.

Quoted 5 lines

In that case, I expect that during the hotplug,|vmidlen_detect()| will be called and return the|vmid_bits| value, which is used as the active VMID. At that moment, the local TLB could be speculatively polluted, I think. Likely, it makes sense to call vmidlen_detect() only once for each hart during initial bringup.

That may bring you more problems than it solves. You'd need to stash away the value originally read somewhere. And that somewhere isn't per-CPU data.

Quoted 18 lines
Quoted 5 lines

In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

It make sense (but I don't know if it is a possible case) to be sure that HGATP.MODE remains the same, so there is no need to have TLB flush. If HGATP.MODE is changed then it will be needed to do TLB flush as I mentioned above.

If we agreed to keep local_hfence_gvma_all() then I think it isn't really any sense to restore 'old' or OR-ing it with HGATP_VMID_MASK.

Generally if 'old' is guaranteed to be zero (and, probably, it makes sense to check that in vmidlen_detect() and panic if it isn't zero) and if vmidlen_detect() function will be called before any guest domain(s) will be ran then I could agree that we don't need local_hfence_gvma_all() here.

Quoted 7 lines
Quoted 4 lines

As an option we can do local_hfence_gvma_all() only if 'old' value wasn't set to zero.

Does it make sense?

Well - I'd like the pre-conditions to be understood better. For example, can a hart really speculate into guest mode, when the hart is only in the process of being brought up?

I couldn't explicit words that a hart can't speculate into guest mode either on bring up or during its work.

But there are some moments in the spec which tells:
Implementations with virtual memory are permitted to perform address translations speculatively and earlier than required by an explicit memory access, and are permitted to cache them in address translation cache structures—including possibly caching the identity mappings from effective address to physical address used in Bare translation modes and M-mode.
And here:
Implementations may also execute the address-translation algorithm speculatively at any time, for any virtual address, as long as satp is active (as defined in Section 10.1.11). Such speculative executions have the effect of pre-populating the address-translation cache.
Where it is explicitly mentioned that speculation can happen in *any time*. And at the same time:
Speculative executions of the address-translation algorithm behave as non-speculative executions of the algorithm do, except that they must not set the dirty bit for a PTE, they must not trigger an exception, and they must not create address-translation cache entries if those entries would have been invalidated by any SFENCE.VMA instruction executed by the hart since the speculative execution of the algorithm began.
What I read as if TLB was empty before it will stay empty.

Also, despite of the fact here it is mentioned that when V=0 two-stage address translation is inactivated:
The current virtualization mode, denoted V, indicates whether the hart is currently executing in a guest. When V=1, the hart is either in virtual S-mode (VS-mode), or in virtual U-mode (VU-mode) atop a guest OS running in VS-mode. When V=0, the hart is either in M-mode, in HS-mode, or in U-mode atop an OS running in HS-mode. The virtualization mode also indicates whether two-stage address translation is active (V=1) or inactive (V=0).
But on the same side, writing to hgatp register activates it:
The hgatp register is considered active for the purposes of
the address-translation algorithm unless the effective privilege mode is U and hstatus.HU=0.
And if so + considering that speculation could happen at any time, and we are in HS-mode, not it U mode then I would say that it could really speculate into guest mode.

Quoted 10 lines
Quoted 9 lines
Quoted 7 lines

xen/arch/riscv/vmid.c line 84

Quoted 3 lines
xen/arch/riscv/vmid.c new file +2 -0
+    data->max_vmid = BIT(vmid_len, U) - 1;
+    data->disabled = !opt_vmid_enabled || (vmid_len <= 1);

Actually, what exactly does it mean that "VMIDs are disabled"? There's no enable bit that I could find anywhere. Isn't it rather that in this case you need to arrange to flush always on VM entry (or always after a P2M change, depending how the TLB is split between guest and host use)?

"VMIDs are disabled" here means that TLB flush will happen each time p2m is changed.

That's better described as "VMIDs aren't used" then?

It sounds a little bit just like an opposite to "disabled" (i.e. means basically the same), but I am okay to use "used" instead.

Quoted 25 lines
Quoted 11 lines
Quoted 9 lines

xen/arch/riscv/vmid.c line 91

Quoted 7 lines
xen/arch/riscv/vmid.c new file +6 -0
+    if ( g_disabled != data->disabled )
+    {
+        printk("%s: VMIDs %sabled.\n", __func__,
+               data->disabled ? "dis" : "en");
+        if ( !g_disabled )
+            g_disabled = data->disabled;

This doesn't match x86 code. g_disabled is a tristate there, which only the boot CPU would ever write to.

Why g_disabled is written only by boot CPU? Does x86 have only two options or VMIDs are enabled for all CPUs or it is disabled for all of them?

Did you look at the x86 code again, or the patch that I sent for it?

Quoted 2 lines

For RISC-V as I mentioned above it is needed to check all harts as the spec. doesn't explicitly mention that VMIDLEN is equal for all harts...

Even if in practice x86 systems are symmetric in this regard, you will have seen that we support varying values there as well. Up to and including ASIDs being in use on some CPUs, but not on others. So that code can serve as a reference for you, I think.

Quoted 5 lines
Quoted 5 lines

A clear shortcoming of the x86 code (that you copied) is that the log message doesn't identify the CPU in question. A sequence of "disabled" and "enabled" could thus result, without the last one (or in fact any one) making clear what the overall state is. I think you want to avoid this from the beginning.

Quoted 7 lines
Quoted 4 lines

... Thereby it seems like declaration of g_disabled should be moved outside vmid_init() function and add a new function which will return g_disabled value (or just make g_disabled not static and rename to something like g_vmids_disabled).

No, why? While I didn't Cc you on my patch submission, I specifically replied to it with you (alone) on the To: list, just so you can look there first before suggesting (sorry) odd things.

I haven't received this e-mail, but I was able to find it on lore.kernel.org. Thanks.

~ Oleksii

#13 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

Quoted 140 lines · Oleksii Kurochko
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Oleksii Kurochko
Quoted 9 lines · Jan Beulich

xen/arch/riscv/setup.c void __init noreturn start_xen(unsigned long bootcpu_id, · line 152

Quoted 5 lines · Oleksii Kurochko
xen/arch/riscv/setup.c +1 -0
@@ -148,6 +149,8 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
       console_init_postirq();
 
+    vmid_init();

This lives here only temporarily, I assume? Every hart will need to execute it, and hence (like we have it on x86) this may want to be a central place elsewhere.

Quoted 8 lines
Quoted 6 lines

I haven’t checked how it is done on x86; I probably should.

I planned to call it for each hart separately during secondary hart bring-up, since accessing the|hgatp| register of a hart is required to detect|VMIDLEN|. Therefore,|vmid_init()| should be called for secondary harts when their initialization code starts executing.

But is this going to be the only per-hart thing that will need doing? Otherwise the same larger "container" function may want calling instead.

Yes, it is going to be the only per-hart operation.

There is|__cpu_up()| (not yet upstreamed [1]), which calls

|sbi_hsm_hart_start(hartid, boot_addr, hsm_data)| to start a hart, and I planned
to place|vmid_init()| somewhere in the code executed at|boot_addr|.

[1]https://gitlab.com/xen-project/people/olkur/xen/-/blob/latest/xen/arch/riscv/smpboot.c#L40

Quoted 10 lines
Quoted 5 lines
Quoted 3 lines

xen/arch/riscv/vmid.c line 50

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+{
+    unsigned long vmid_bits;

Why "long" (also for the function return type)?

Because csr_read() returns unsigned long as HGATP register has 'unsigned long' length.

Oh, right, I should have commented on the function return type only. Yet then I also can't resist stating that this kind of use of a variable, which initially is assigned a value that doesn't really fit its name, is easily misleading towards giving such comments.

Quoted 7 lines
Quoted 6 lines

But it could be done in this way:

      csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
      vmid_bits =  MASK_EXTR(csr_read(CSR_HGATP), HGATP_VMID_MASK);
      vmid_bits = ffs_g(vmid_bits);
      csr_write(CSR_HGATP, old);

And then use uint16_t for vmid_bits and use uin16_t as a return type.

Please check ./CODING_STYLE again as to the use of fixed-width types.

I meant unsigned short, uint16_t was just short to write. I'll try to be more specific.

Quoted 65 lines
Quoted 32 lines
Quoted 19 lines

xen/arch/riscv/vmid.c line 58

Quoted 9 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();
Quoted 2 lines

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear.

It could be an issue (or, at least, it is recommended) when hgatp.MODE is changed:
If hgatp.MODE is changed for a given VMID, an HFENCE.GVMA with rs1=x0 (and rs2 set to either x0 or the VMID) must be executed to order subsequent guest translations with the MODE change—even if the old MODE or new MODE is Bare.
On other hand it is guaranteed that, at least, on Reset (and so I assume for power on) that:
If the hypervisor extension is implemented, the hgatp.MODE and vsatp.MODE fields are reset to 0.

Quoted 5 lines

So it seems like if no guest is ran then there is no need even to write hgatp.MODE as zero, but it might be sense to do that explicitly just to be sure.

I thought it was possible to have a running guest and perform a CPU hotplug.

But that guest will run on another hart.

Quoted 5 lines

In that case, I expect that during the hotplug,|vmidlen_detect()| will be called and return the|vmid_bits| value, which is used as the active VMID. At that moment, the local TLB could be speculatively polluted, I think. Likely, it makes sense to call vmidlen_detect() only once for each hart during initial bringup.

That may bring you more problems than it solves. You'd need to stash away the value originally read somewhere. And that somewhere isn't per-CPU data.

Quoted 18 lines
Quoted 5 lines

In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

It make sense (but I don't know if it is a possible case) to be sure that HGATP.MODE remains the same, so there is no need to have TLB flush. If HGATP.MODE is changed then it will be needed to do TLB flush as I mentioned above.

If we agreed to keep local_hfence_gvma_all() then I think it isn't really any sense to restore 'old' or OR-ing it with HGATP_VMID_MASK.

Generally if 'old' is guaranteed to be zero (and, probably, it makes sense to check that in vmidlen_detect() and panic if it isn't zero) and if vmidlen_detect() function will be called before any guest domain(s) will be ran then I could agree that we don't need local_hfence_gvma_all() here.

Quoted 7 lines
Quoted 4 lines

As an option we can do local_hfence_gvma_all() only if 'old' value wasn't set to zero.

Does it make sense?

Well - I'd like the pre-conditions to be understood better. For example, can a hart really speculate into guest mode, when the hart is only in the process of being brought up?

I couldn't explicit words that a hart can't speculate into guest mode either on bring up or during its work.

But there are some moments in the spec which tells:
Implementations with virtual memory are permitted to perform address translations speculatively and earlier than required by an explicit memory access, and are permitted to cache them in address translation cache structures—including possibly caching the identity mappings from effective address to physical address used in Bare translation modes and M-mode.
And here:
Implementations may also execute the address-translation algorithm speculatively at any time, for any virtual address, as long as satp is active (as defined in Section 10.1.11). Such speculative executions have the effect of pre-populating the address-translation cache.
Where it is explicitly mentioned that speculation can happen in *any time*.

Quoted 8 lines

And at the same time:
Speculative executions of the address-translation algorithm behave as non-speculative executions of the algorithm do, except that they must not set the dirty bit for a PTE, they must not trigger an exception, and they must not create address-translation cache entries if those entries would have been invalidated by any SFENCE.VMA instruction executed by the hart since the speculative execution of the algorithm began.
What I read as if TLB was empty before it will stay empty.

I read that as "flushing the TLB invalidates entries created by speculative execution before the TLB flush". That is the bare minimum needed for TLB flushing to work. You have to do the TLB flush *after* changing the PTEs, not before.

This is true on at least x86 but I expect it to hold in general.

Signature · 2 lines
Sincerely,
Demi Marie Obenour (she/her/hers)
#14 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

Quoted 144 lines · Demi Marie Obenour
Quoted 135 lines · Oleksii Kurochko
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Oleksii Kurochko
Quoted 9 lines · Jan Beulich

xen/arch/riscv/setup.c void __init noreturn start_xen(unsigned long bootcpu_id, · line 152

Quoted 5 lines · Oleksii Kurochko
xen/arch/riscv/setup.c +1 -0
@@ -148,6 +149,8 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
        console_init_postirq();
 
+    vmid_init();

This lives here only temporarily, I assume? Every hart will need to execute it, and hence (like we have it on x86) this may want to be a central place elsewhere.

Quoted 8 lines
Quoted 6 lines

I haven’t checked how it is done on x86; I probably should.

I planned to call it for each hart separately during secondary hart bring-up, since accessing the|hgatp| register of a hart is required to detect|VMIDLEN|. Therefore,|vmid_init()| should be called for secondary harts when their initialization code starts executing.

But is this going to be the only per-hart thing that will need doing? Otherwise the same larger "container" function may want calling instead.

Yes, it is going to be the only per-hart operation.

There is|__cpu_up()| (not yet upstreamed [1]), which calls

|sbi_hsm_hart_start(hartid, boot_addr, hsm_data)| to start a hart, and I planned
to place|vmid_init()| somewhere in the code executed at|boot_addr|.

[1]https://gitlab.com/xen-project/people/olkur/xen/-/blob/latest/xen/arch/riscv/smpboot.c#L40

Quoted 10 lines
Quoted 5 lines
Quoted 3 lines

xen/arch/riscv/vmid.c line 50

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+{
+    unsigned long vmid_bits;

Why "long" (also for the function return type)?

Because csr_read() returns unsigned long as HGATP register has 'unsigned long' length.

Oh, right, I should have commented on the function return type only. Yet then I also can't resist stating that this kind of use of a variable, which initially is assigned a value that doesn't really fit its name, is easily misleading towards giving such comments.

Quoted 7 lines
Quoted 6 lines

But it could be done in this way:

       csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
       vmid_bits =  MASK_EXTR(csr_read(CSR_HGATP), HGATP_VMID_MASK);
       vmid_bits = ffs_g(vmid_bits);
       csr_write(CSR_HGATP, old);

And then use uint16_t for vmid_bits and use uin16_t as a return type.

Please check ./CODING_STYLE again as to the use of fixed-width types.

I meant unsigned short, uint16_t was just short to write. I'll try to be more specific.

Quoted 64 lines
Quoted 31 lines
Quoted 18 lines

xen/arch/riscv/vmid.c line 58

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();
Quoted 2 lines

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear.

It could be an issue (or, at least, it is recommended) when hgatp.MODE is changed:
If hgatp.MODE is changed for a given VMID, an HFENCE.GVMA with rs1=x0 (and rs2 set to either x0 or the VMID) must be executed to order subsequent guest translations with the MODE change—even if the old MODE or new MODE is Bare.
On other hand it is guaranteed that, at least, on Reset (and so I assume for power on) that:
If the hypervisor extension is implemented, the hgatp.MODE and vsatp.MODE fields are reset to 0.

Quoted 5 lines

So it seems like if no guest is ran then there is no need even to write hgatp.MODE as zero, but it might be sense to do that explicitly just to be sure.

I thought it was possible to have a running guest and perform a CPU hotplug.

But that guest will run on another hart.

Quoted 5 lines

In that case, I expect that during the hotplug,|vmidlen_detect()| will be called and return the|vmid_bits| value, which is used as the active VMID. At that moment, the local TLB could be speculatively polluted, I think. Likely, it makes sense to call vmidlen_detect() only once for each hart during initial bringup.

That may bring you more problems than it solves. You'd need to stash away the value originally read somewhere. And that somewhere isn't per-CPU data.

Quoted 18 lines
Quoted 5 lines

In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

It make sense (but I don't know if it is a possible case) to be sure that HGATP.MODE remains the same, so there is no need to have TLB flush. If HGATP.MODE is changed then it will be needed to do TLB flush as I mentioned above.

If we agreed to keep local_hfence_gvma_all() then I think it isn't really any sense to restore 'old' or OR-ing it with HGATP_VMID_MASK.

Generally if 'old' is guaranteed to be zero (and, probably, it makes sense to check that in vmidlen_detect() and panic if it isn't zero) and if vmidlen_detect() function will be called before any guest domain(s) will be ran then I could agree that we don't need local_hfence_gvma_all() here.

Quoted 7 lines
Quoted 4 lines

As an option we can do local_hfence_gvma_all() only if 'old' value wasn't set to zero.

Does it make sense?

Well - I'd like the pre-conditions to be understood better. For example, can a hart really speculate into guest mode, when the hart is only in the process of being brought up?

I couldn't explicit words that a hart can't speculate into guest mode either on bring up or during its work.

But there are some moments in the spec which tells:
Implementations with virtual memory are permitted to perform address translations speculatively and earlier than required by an explicit memory access, and are permitted to cache them in address translation cache structures—including possibly caching the identity mappings from effective address to physical address used in Bare translation modes and M-mode.
And here:
Implementations may also execute the address-translation algorithm speculatively at any time, for any virtual address, as long as satp is active (as defined in Section 10.1.11). Such speculative executions have the effect of pre-populating the address-translation cache.
Where it is explicitly mentioned that speculation can happen in *any time*.

Quoted 8 lines

And at the same time:
Speculative executions of the address-translation algorithm behave as non-speculative executions of the algorithm do, except that they must not set the dirty bit for a PTE, they must not trigger an exception, and they must not create address-translation cache entries if those entries would have been invalidated by any SFENCE.VMA instruction executed by the hart since the speculative execution of the algorithm began.
What I read as if TLB was empty before it will stay empty.

Quoted 2 lines

I read that as "flushing the TLB invalidates entries created by speculative execution before the TLB flush".

But this part:
they must not create address-translation cache entries if those entries would have been invalidated by any SFENCE.VMA instruction

Doesn't it mean that entries which was invalidated by SFENCE.VMA can't be inserted into the TLB during speculative execution?

So, if the speculative page walk started before|SFENCE.VMA|,|SFENCE.VMA|
indicates: “All previous TLB entries might be invalid". Therefore, any speculative TLB entry/that started before/ must*not* be inserted into the TLB afterward.

So, hardware tracks if a|SFENCE.VMA| occurred/after/ speculation started. If so, any speculative address translations must be*discarded* or *not committed*.

Quoted 5 lines

That is the bare minimum needed for TLB
flushing to work. You have to do the TLB flush *after* changing the PTEs, not before.

This is true on at least x86 but I expect it to hold in general.

Agree with that.

~ Oleksii

#15 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

In reply to Oleksii Kurochko
Quoted 20 lines · Oleksii Kurochko
Quoted 19 lines · Jan Beulich
Quoted 7 lines · Oleksii Kurochko
Quoted 4 lines · Jan Beulich

xen/arch/riscv/vmid.c line 50

Quoted 2 lines · Oleksii Kurochko
xen/arch/riscv/vmid.c new file +2 -0
+{
+    unsigned long vmid_bits;

Why "long" (also for the function return type)?

Because csr_read() returns unsigned long as HGATP register has 'unsigned long' length.

Oh, right, I should have commented on the function return type only. Yet then I also can't resist stating that this kind of use of a variable, which initially is assigned a value that doesn't really fit its name, is easily misleading towards giving such comments.

Quoted 6 lines

But it could be done in this way:

      csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
      vmid_bits =  MASK_EXTR(csr_read(CSR_HGATP), HGATP_VMID_MASK);
      vmid_bits = ffs_g(vmid_bits);
      csr_write(CSR_HGATP, old);

And then use uint16_t for vmid_bits and use uin16_t as a return type.

Quoted 4 lines
Quoted 1 line

Please check ./CODING_STYLE again as to the use of fixed-width types.

I meant unsigned short, uint16_t was just short to write. I'll try to be more specific.

I'd also recommend against unsigned short when there are no space concerns. unsigned int is what wants using in the general case.

Quoted 75 lines
Quoted 64 lines
Quoted 31 lines
Quoted 18 lines

xen/arch/riscv/vmid.c line 58

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();
Quoted 2 lines

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear.

It could be an issue (or, at least, it is recommended) when hgatp.MODE is changed:
If hgatp.MODE is changed for a given VMID, an HFENCE.GVMA with rs1=x0 (and rs2 set to either x0 or the VMID) must be executed to order subsequent guest translations with the MODE change—even if the old MODE or new MODE is Bare.
On other hand it is guaranteed that, at least, on Reset (and so I assume for power on) that:
If the hypervisor extension is implemented, the hgatp.MODE and vsatp.MODE fields are reset to 0.

Quoted 5 lines

So it seems like if no guest is ran then there is no need even to write hgatp.MODE as zero, but it might be sense to do that explicitly just to be sure.

I thought it was possible to have a running guest and perform a CPU hotplug.

But that guest will run on another hart.

Quoted 5 lines

In that case, I expect that during the hotplug,|vmidlen_detect()| will be called and return the|vmid_bits| value, which is used as the active VMID. At that moment, the local TLB could be speculatively polluted, I think. Likely, it makes sense to call vmidlen_detect() only once for each hart during initial bringup.

That may bring you more problems than it solves. You'd need to stash away the value originally read somewhere. And that somewhere isn't per-CPU data.

Quoted 18 lines
Quoted 5 lines

In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

It make sense (but I don't know if it is a possible case) to be sure that HGATP.MODE remains the same, so there is no need to have TLB flush. If HGATP.MODE is changed then it will be needed to do TLB flush as I mentioned above.

If we agreed to keep local_hfence_gvma_all() then I think it isn't really any sense to restore 'old' or OR-ing it with HGATP_VMID_MASK.

Generally if 'old' is guaranteed to be zero (and, probably, it makes sense to check that in vmidlen_detect() and panic if it isn't zero) and if vmidlen_detect() function will be called before any guest domain(s) will be ran then I could agree that we don't need local_hfence_gvma_all() here.

Quoted 7 lines
Quoted 4 lines

As an option we can do local_hfence_gvma_all() only if 'old' value wasn't set to zero.

Does it make sense?

Well - I'd like the pre-conditions to be understood better. For example, can a hart really speculate into guest mode, when the hart is only in the process of being brought up?

I couldn't explicit words that a hart can't speculate into guest mode either on bring up or during its work.

Quoted 12 lines

But there are some moments in the spec which tells:
Implementations with virtual memory are permitted to perform address translations speculatively and earlier than required by an explicit memory access, and are permitted to cache them in address translation cache structures—including possibly caching the identity mappings from effective address to physical address used in Bare translation modes and M-mode.
And here:
Implementations may also execute the address-translation algorithm speculatively at any time, for any virtual address, as long as satp is active (as defined in Section 10.1.11). Such speculative executions have the effect of pre-populating the address-translation cache.

That's satp though, not hgatp.

Quoted 10 lines

Where it is explicitly mentioned that speculation can happen in *any time*. And at the same time:
Speculative executions of the address-translation algorithm behave as non-speculative executions of the algorithm do, except that they must not set the dirty bit for a PTE, they must not trigger an exception, and they must not create address-translation cache entries if those entries would have been invalidated by any SFENCE.VMA instruction executed by the hart since the speculative execution of the algorithm began.
What I read as if TLB was empty before it will stay empty.

Quoted 16 lines

Also, despite of the fact here it is mentioned that when V=0 two-stage address translation is inactivated:
The current virtualization mode, denoted V, indicates whether the hart is currently executing in a guest. When V=1, the hart is either in virtual S-mode (VS-mode), or in virtual U-mode (VU-mode) atop a guest OS running in VS-mode. When V=0, the hart is either in M-mode, in HS-mode, or in U-mode atop an OS running in HS-mode. The virtualization mode also indicates whether two-stage address translation is active (V=1) or inactive (V=0).
But on the same side, writing to hgatp register activates it:
The hgatp register is considered active for the purposes of the address-translation algorithm unless the effective privilege mode is U and hstatus.HU=0.
And if so + considering that speculation could happen at any time, and we are in HS-mode, not it U mode then I would say that it could really speculate into guest mode.

Hmm, that leaves some things to be desired. What I'm particularly puzzled by is that there's nothing said either way towards speculation through SRET. That's the important aspect here aiui, because without that the hart can't speculate into guest mode.

But yes, in the absence of any clear indication to the contrary, I think you want to keep the local_hfence_gvma_all() (with a suitable comment).

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

xen/arch/riscv/vmid.c line 84

Quoted 2 lines
xen/arch/riscv/vmid.c new file +2 -0
+    data->max_vmid = BIT(vmid_len, U) - 1;
+    data->disabled = !opt_vmid_enabled || (vmid_len <= 1);

Actually, what exactly does it mean that "VMIDs are disabled"? There's no enable bit that I could find anywhere. Isn't it rather that in this case you need to arrange to flush always on VM entry (or always after a P2M change, depending how the TLB is split between guest and host use)?

Quoted 6 lines
Quoted 3 lines
Quoted 2 lines

"VMIDs are disabled" here means that TLB flush will happen each time p2m is changed.

That's better described as "VMIDs aren't used" then?

It sounds a little bit just like an opposite to "disabled" (i.e. means basically the same), but I am okay to use "used" instead.

If you want to stick to using "disabled", then how about "VMID use is disabled"? (You probably meanwhile understood that what I'm after is it becoming clear that this is a software decision, not something you can enforce in hardware.)

Jan

#27 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Jan Beulich
Quoted 17 lines · Jan Beulich
Quoted 16 lines · Oleksii Kurochko

Introduce support for allocating and initializing the root page table required for RISC-V stage-2 address translation.

To implement root page table allocation the following is introduced:
- p2m_get_clean_page() and p2m_alloc_root_table(), p2m_allocate_root() helpers to allocate and zero a 16 KiB root page table, as mandated by the RISC-V privileged specification for Sv32x4/Sv39x4/Sv48x4/Sv57x4 modes.
- Update p2m_init() to inititialize p2m_root_order.
- Add maddr_to_page() and page_to_maddr() macros for easier address manipulation.
- Introduce paging_ret_pages_to_domheap() to return some pages before allocate 16 KiB pages for root page table.
- Allocate root p2m table after p2m pool is initialized.
- Add construct_hgatp() to construct the hgatp register value based on p2m->root, p2m->hgatp_mode and VMID.

Quoted 4 lines

Imo for this to be complete, freeing of the root table also wants taking care of. Much like imo p2m_init() would better immediately be accompanied by the respective teardown function. Once you start using them, you want to use them in pairs, after all.

I decided to ignore freeing of the root table and tearing down p2m mapping as it is going to be used during a domain destroy, which isn't supported at the moment, and thereby an implementation of them could be delayed when they really will be used.

Quoted 32 lines
Quoted 32 lines
xen/arch/riscv/include/asm/riscv_encoding.h +4 -0
@@ -133,11 +133,13 @@
  #define HGATP_MODE_SV48X4		_UL(9)
 
  #define HGATP32_MODE_SHIFT		31
+#define HGATP32_MODE_MASK		_UL(0x80000000)
  #define HGATP32_VMID_SHIFT		22
  #define HGATP32_VMID_MASK		_UL(0x1FC00000)
  #define HGATP32_PPN			_UL(0x003FFFFF)
 
  #define HGATP64_MODE_SHIFT		60
+#define HGATP64_MODE_MASK		_ULL(0xF000000000000000)
  #define HGATP64_VMID_SHIFT		44
  #define HGATP64_VMID_MASK		_ULL(0x03FFF00000000000)
  #define HGATP64_PPN			_ULL(0x00000FFFFFFFFFFF)
@@ -170,6 +172,7 @@
  #define HGATP_VMID_SHIFT		HGATP64_VMID_SHIFT
  #define HGATP_VMID_MASK			HGATP64_VMID_MASK
  #define HGATP_MODE_SHIFT		HGATP64_MODE_SHIFT
+#define HGATP_MODE_MASK			HGATP64_MODE_MASK
  #else
  #define MSTATUS_SD			MSTATUS32_SD
  #define SSTATUS_SD			SSTATUS32_SD
@@ -181,8 +184,11 @@
  #define HGATP_VMID_SHIFT		HGATP32_VMID_SHIFT
  #define HGATP_VMID_MASK			HGATP32_VMID_MASK
  #define HGATP_MODE_SHIFT		HGATP32_MODE_SHIFT
+#define HGATP_MODE_MASK			HGATP32_MODE_MASK
  #endif
 
Quoted 7 lines

xen/arch/riscv/include/asm/riscv_encoding.h line 190

Quoted 1 line
xen/arch/riscv/include/asm/riscv_encoding.h +1 -0
+#define GUEST_ROOT_PAGE_TABLE_SIZE	KB(16)

In another context I already mentioned that imo you want to be careful with the use of "guest" in identifiers. It's not the guest page tables which have an order-2 root table, but the P2M (Xen terminology) or G-stage / second stage (RISC-V spec terminology) ones. As long as you're only doing P2M work, this may not look significant. But once you actually start dealing with guest page tables, it easily can end up confusing.

I thought that GUEST_ROOT_PAGE_TABLE is equal to G-stage root page table. But it is confusing even now, then I'll use GSTAGE_ROOT_PAGE_TABLE_SIZE instead.

Quoted 18 lines
Quoted 4 lines

xen/arch/riscv/p2m.c line 10

Quoted 10 lines
xen/arch/riscv/p2m.c +5 -0
@@ -1,8 +1,86 @@
+#include <xen/domain_page.h>
  #include <xen/mm.h>
  #include <xen/rwlock.h>
  #include <xen/sched.h>
 
  #include <asm/paging.h>
+#include <asm/p2m.h>
+#include <asm/riscv_encoding.h>
+
+unsigned int __read_mostly p2m_root_order;

If this is to be a variable at all, it ought to be __ro_after_init, and hence it shouldn't be written every time p2m_init() is run. If you want to to remain as a variable, what's wrong with

Quoted 5 lines

const unsigned int p2m_root_order = ilog2(GUEST_ROOT_PAGE_TABLE_SIZE) - PAGE_SHIFT;

or some such? But of course equally well you could have

#define P2M_ROOT_ORDER (ilog2(GUEST_ROOT_PAGE_TABLE_SIZE) - PAGE_SHIFT)

The only one reason p2m_root_order was introduced as variable it was that I had a compilation issue when define P2M_ROOT_ORDER in such way:
#define P2M_ROOT_ORDER get_order_from_bytes(GUEST_ROOT_PAGE_TABLE_SIZE)
But I can't reproduce it anymore.

Anyway, your option is better as it should be faster.

Quoted 12 lines

xen/arch/riscv/p2m.c line 20

Quoted 10 lines
xen/arch/riscv/p2m.c +9 -0
+static void clear_and_clean_page(struct page_info *page)
+{
+    clear_domain_page(page_to_mfn(page));
+
+    /*
+     * If the IOMMU doesn't support coherent walks and the p2m tables are
+     * shared between the CPU and IOMMU, it is necessary to clean the
+     * d-cache.
+     */

That is, ...

Quoted 2 lines

xen/arch/riscv/p2m.c line 21

Quoted 1 line
xen/arch/riscv/p2m.c +1 -0
+    clean_dcache_va_range(page, PAGE_SIZE);

... this call really wants to be conditional?

It makes sense. I will add "if ( p2m->clean_pte )" and update clear_and_clean_page() declaration.

Quoted 8 lines

xen/arch/riscv/p2m.c line 24

Quoted 4 lines
xen/arch/riscv/p2m.c +3 -0
+}
+
+static struct page_info *p2m_allocate_root(struct domain *d)

With there also being p2m_alloc_root_table() and with that being the sole caller of the function here, I wonder: Is having this in a separate function really outweighing the possible confusion of which of the two functions to use?

p2m_allocate_root() will be also used in further patches to allocate root's metadata page(s), but, also, in the same function p2m_alloc_root_table().

Probably, to avoid confusion it makes sense to rename p2m_allocate_root() to p2m_allocate_root_page().

Quoted 19 lines
Quoted 19 lines
xen/arch/riscv/p2m.c +18 -0
+{
+    struct page_info *page;
+
+    /*
+     * As mentioned in the Priviliged Architecture Spec (version 20240411)
+     * in Section 18.5.1, for the paged virtual-memory schemes  (Sv32x4,
+     * Sv39x4, Sv48x4, and Sv57x4), the root page table is 16 KiB and must
+     * be aligned to a 16-KiB boundary.
+     */
+    page = alloc_domheap_pages(d, P2M_ROOT_ORDER, MEMF_no_owner);
+    if ( !page )
+        return NULL;
+
+    for ( unsigned int i = 0; i < P2M_ROOT_PAGES; i++ )
+        clear_and_clean_page(page + i);
+
+    return page;
+}
Quoted 8 lines

xen/arch/riscv/p2m.c line 48

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+
+unsigned long construct_hgatp(struct p2m_domain *p2m, uint16_t vmid)
+{
+    unsigned long ppn;
+
+    ppn = PFN_DOWN(page_to_maddr(p2m->root)) & HGATP_PPN;

Why not page_to_pfn() or mfn_x(page_to_mfn())? I.e. why mix different groups of accessors?

No specific reason, just missed such option.

Quoted 17 lines

As to "& HGATP_PPN" - that's making an assumption that you could avoid by using ...

xen/arch/riscv/p2m.c line 60

Quoted 11 lines
xen/arch/riscv/p2m.c +11 -0
+    /* TODO: add detection of hgatp_mode instead of hard-coding it. */
+#if RV_STAGE1_MODE == SATP_MODE_SV39
+    p2m->hgatp_mode = HGATP_MODE_SV39X4;
+#elif RV_STAGE1_MODE == SATP_MODE_SV48
+    p2m->hgatp_mode = HGATP_MODE_SV48X4;
+#else
+#   error "add HGATP_MODE"
+#endif
+
+    return ppn | MASK_INSR(p2m->hgatp_mode, HGATP_MODE_MASK) |
+                 MASK_INSR(vmid, HGATP_VMID_MASK);

... MASK_INSR() also on "ppn".

Quoted 3 lines

As to the writing of p2m->hgatp_mode - you don't want to do this here, when this is the function to calculate the value to put into hgatp. This field needs calculating only once, perhaps in p2m_init().

Agree, it makes sense to move hgatp_mode detection to p2m_init().

Quoted 7 lines

xen/arch/riscv/p2m.c line 67

Quoted 6 lines
xen/arch/riscv/p2m.c +5 -0
+static int p2m_alloc_root_table(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;
+    struct page_info *page;
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES;

Is this local variable really of any use?

It will be needed for one of the next patches and to have less change in further patch, I've decided to introduce it here.

Quoted 11 lines

xen/arch/riscv/p2m.c line 78

Quoted 11 lines
xen/arch/riscv/p2m.c +10 -0
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
Quoted 1 line

Hmm, and the pool is then left shrunk by 4 pages?

Yes until they are used for root table it shouldn't be in p2m pool (freelist), when root table will be freed then it makes sense to return them back. Am I missing something?

Probably, you meant that it is needed to update p2m->pages?

Quoted 25 lines
Quoted 25 lines
xen/arch/riscv/paging.c +18 -0
@@ -54,6 +54,36 @@ int paging_freelist_init(struct domain *d, unsigned long pages,
 
      return 0;
  }
+
+bool paging_ret_pages_to_domheap(struct domain *d, unsigned int nr_pages)
+{
+    struct page_info *page;
+
+    ASSERT(spin_is_locked(&d->arch.paging.lock));
+
+    if ( ACCESS_ONCE(d->arch.paging.total_pages) < nr_pages )
+        return false;
+
+    for ( unsigned int i = 0; i < nr_pages; i++ )
+    {
+        /* Return memory to domheap. */
+        page = page_list_remove_head(&d->arch.paging.freelist);
+        if( page )
+        {
+            ACCESS_ONCE(d->arch.paging.total_pages)--;
+            free_domheap_page(page);
Quoted 8 lines

xen/arch/riscv/paging.c int paging_freelist_init(struct domain *d, unsigned long pages, · line 80

Quoted 6 lines
xen/arch/riscv/paging.c +6 -0
+        }
+        else
+        {
+            printk(XENLOG_ERR
+                   "Failed to free P2M pages, P2M freelist is empty.\n");
+            return false;

Looks pretty redundant with half of paging_freelist_init(), including the stray full stop in the log message.

I will introduce then a separate function (for a code, which is inside for-loop) and use it here and in paging_freelist_init().

Thanks.

~ Oleksii

#32 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Jan Beulich
Quoted 18 lines · Jan Beulich
Quoted 17 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +17 -0
+static int p2m_alloc_root_table(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;
+    struct page_info *page;
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES;
+
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
+
Quoted 8 lines

xen/arch/riscv/p2m.c line 83

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+    p2m->root = page;
+
+    return 0;
+}

In the success case, shouldn't you bump the paging pool's total_pages by P2M_ROOT_PAGES? (As the freeing side is missing so far, it's not easy to tell whether there's [going to be] a balancing problem in the long run. In the short run there certainly is.)

I think that total_pages should be updated only in case when page is added to freelist.
In the case of p2m root table, we just returning some pages to domheap and durint that decreasing an amount of total_pages as freelist has lesser pages, and then just allocate pages from domheap without adding them to freelist.

~ Oleksii

#16 lore raw

Re: [PATCH v3 03/20] xen/riscv: introduce VMID allocation and manegement

In reply to Jan Beulich
Quoted 114 lines · Jan Beulich
Quoted 74 lines
Quoted 64 lines
Quoted 31 lines
Quoted 18 lines

xen/arch/riscv/vmid.c line 58

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    unsigned long old;
+
+    /* Figure-out number of VMID bits in HW */
+    old = csr_read(CSR_HGATP);
+
+    csr_write(CSR_HGATP, old | HGATP_VMID_MASK);
+    vmid_bits = csr_read(CSR_HGATP);
+    vmid_bits =  MASK_EXTR(vmid_bits, HGATP_VMID_MASK);

Nit: Stray blank.

xen/arch/riscv/vmid.c line 66

Quoted 8 lines
xen/arch/riscv/vmid.c new file +8 -0
+    vmid_bits = flsl(vmid_bits);
+    csr_write(CSR_HGATP, old);
+
+    /*
+     * We polluted local TLB so flush all guest TLB as
+     * a speculative access can happen at any time.
+     */
+    local_hfence_gvma_all();
Quoted 2 lines

There's no guest running. If you wrote hgat.MODE as zero, as per my understanding now new TLB entries could even purely theoretically appear.

It could be an issue (or, at least, it is recommended) when hgatp.MODE is changed:
If hgatp.MODE is changed for a given VMID, an HFENCE.GVMA with rs1=x0 (and rs2 set to either x0 or the VMID) must be executed to order subsequent guest translations with the MODE change—even if the old MODE or new MODE is Bare.
On other hand it is guaranteed that, at least, on Reset (and so I assume for power on) that:
If the hypervisor extension is implemented, the hgatp.MODE and vsatp.MODE fields are reset to 0.

Quoted 5 lines

So it seems like if no guest is ran then there is no need even to write hgatp.MODE as zero, but it might be sense to do that explicitly just to be sure.

I thought it was possible to have a running guest and perform a CPU hotplug.

But that guest will run on another hart.

Quoted 5 lines

In that case, I expect that during the hotplug,|vmidlen_detect()| will be called and return the|vmid_bits| value, which is used as the active VMID. At that moment, the local TLB could be speculatively polluted, I think. Likely, it makes sense to call vmidlen_detect() only once for each hart during initial bringup.

That may bring you more problems than it solves. You'd need to stash away the value originally read somewhere. And that somewhere isn't per-CPU data.

Quoted 18 lines
Quoted 5 lines

In fact, with no guest running (yet) I'm having a hard time seeing why you shouldn't be able to simply write the register with just HGATP_VMID_MASK, i.e. without OR-ing in "old". It's even questionable whether "old" needs restoring; writing plain zero afterwards ought to suffice. You're in charcge of the register, after all.

It make sense (but I don't know if it is a possible case) to be sure that HGATP.MODE remains the same, so there is no need to have TLB flush. If HGATP.MODE is changed then it will be needed to do TLB flush as I mentioned above.

If we agreed to keep local_hfence_gvma_all() then I think it isn't really any sense to restore 'old' or OR-ing it with HGATP_VMID_MASK.

Generally if 'old' is guaranteed to be zero (and, probably, it makes sense to check that in vmidlen_detect() and panic if it isn't zero) and if vmidlen_detect() function will be called before any guest domain(s) will be ran then I could agree that we don't need local_hfence_gvma_all() here.

Quoted 7 lines
Quoted 4 lines

As an option we can do local_hfence_gvma_all() only if 'old' value wasn't set to zero.

Does it make sense?

Well - I'd like the pre-conditions to be understood better. For example, can a hart really speculate into guest mode, when the hart is only in the process of being brought up?

I couldn't explicit words that a hart can't speculate into guest mode either on bring up or during its work.

Quoted 12 lines

But there are some moments in the spec which tells:
Implementations with virtual memory are permitted to perform address translations speculatively and earlier than required by an explicit memory access, and are permitted to cache them in address translation cache structures—including possibly caching the identity mappings from effective address to physical address used in Bare translation modes and M-mode.
And here:
Implementations may also execute the address-translation algorithm speculatively at any time, for any virtual address, as long as satp is active (as defined in Section 10.1.11). Such speculative executions have the effect of pre-populating the address-translation cache.

That's satp though, not hgatp.

Quoted 10 lines

Where it is explicitly mentioned that speculation can happen in*any time*. And at the same time:
Speculative executions of the address-translation algorithm behave as non-speculative executions of the algorithm do, except that they must not set the dirty bit for a PTE, they must not trigger an exception, and they must not create address-translation cache entries if those entries would have been invalidated by any SFENCE.VMA instruction executed by the hart since the speculative execution of the algorithm began.
What I read as if TLB was empty before it will stay empty.

Quoted 16 lines

Also, despite of the fact here it is mentioned that when V=0 two-stage address translation is inactivated:
The current virtualization mode, denoted V, indicates whether the hart is currently executing in a guest. When V=1, the hart is either in virtual S-mode (VS-mode), or in virtual U-mode (VU-mode) atop a guest OS running in VS-mode. When V=0, the hart is either in M-mode, in HS-mode, or in U-mode atop an OS running in HS-mode. The virtualization mode also indicates whether two-stage address translation is active (V=1) or inactive (V=0).
But on the same side, writing to hgatp register activates it:
The hgatp register is considered active for the purposes of the address-translation algorithm unless the effective privilege mode is U and hstatus.HU=0.
And if so + considering that speculation could happen at any time, and we are in HS-mode, not it U mode then I would say that it could really speculate into guest mode.

Quoted 7 lines

Hmm, that leaves some things to be desired. What I'm particularly puzzled by is that there's nothing said either way towards speculation through SRET. That's the important aspect here aiui, because without that the hart can't speculate into guest mode.

But yes, in the absence of any clear indication to the contrary, I think you want to keep the local_hfence_gvma_all() (with a suitable comment).

Interesting that for VS-stage translation is explicitly mention that it is possible to stop speculation:
No mechanism is provided to atomically change vsatp and hgatp together. Hence, to prevent speculative execution causing one guest’s VS-stage translations to be cached under another guest’s VMID, world-switch code should zero vsatp, then swap hgatp, then finally write the new vsatp value. Similarly, if henvcfg.PBMTE need be world-switched, it should be switched after zeroing vsatp but before writing the new vsatp value, obviating the need to execute an HFENCE.VVMA instruction.
So if VSATP is 0 then there is no speculation as there is no need to execute HFENCE.VVMA.

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 7 lines

xen/arch/riscv/vmid.c line 84

Quoted 3 lines
xen/arch/riscv/vmid.c new file +2 -0
+    data->max_vmid = BIT(vmid_len, U) - 1;
+    data->disabled = !opt_vmid_enabled || (vmid_len <= 1);

Actually, what exactly does it mean that "VMIDs are disabled"? There's no enable bit that I could find anywhere. Isn't it rather that in this case you need to arrange to flush always on VM entry (or always after a P2M change, depending how the TLB is split between guest and host use)?

"VMIDs are disabled" here means that TLB flush will happen each time p2m is changed.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

That's better described as "VMIDs aren't used" then?

It sounds a little bit just like an opposite to "disabled" (i.e. means basically the same), but I am okay to use "used" instead.

If you want to stick to using "disabled", then how about "VMID use is disabled"? (You probably meanwhile understood that what I'm after is it becoming clear that this is a software decision, not something you can enforce in hardware.)

"VMID use is disabled" really sounds more clear. Thanks.

~ Oleksii

#41 lore raw

Re: [PATCH v3 09/20] xen/dom0less: abstract Arm-specific p2m type name for device MMIO mappings

In reply to Jan Beulich
Quoted 20 lines · Jan Beulich
Quoted 11 lines · Oleksii Kurochko

Rename p2m_mmio_direct_dev to a more architecture-neutral alias p2m_mmio_direct to avoid leaking Arm-specific naming into common Xen code, such as dom0less passthrough property handling.

This helps reduce platform-specific terminology in shared logic and improves clarity for future non-Arm ports (e.g. RISC-V or PowerPC).

No functional changes — the definition is preserved via a macro alias for Arm.

I'm sorry, but no, ...

Quoted 6 lines
xen/arch/arm/include/asm/p2m.h +0 -0
@@ -137,6 +137,8 @@ typedef enum {
      p2m_max_real_type,  /* Types after this won't be store in the p2m */
  } p2m_type_t;
 
Quoted 4 lines

xen/arch/arm/include/asm/p2m.h typedef enum { · line 140

Quoted 1 line
xen/arch/arm/include/asm/p2m.h +1 -0
+#define p2m_mmio_direct p2m_mmio_direct_dev

... this isn't what I suggested. When Arm has three p2m_mmio_direct_*, randomly aliasing one to p2m_mmio_direct is imo more likely to create confusion than to help things. Imo you want to introduce ...

This is not randomly, this what Arm uses for device's node(s), which is going to be passthroughed...

Quoted 13 lines

xen/common/device-tree/dom0less-build.c static int __init handle_passthrough_prop(struct kernel_info *kinfo, · line 188

Quoted 9 lines
xen/common/device-tree/dom0less-build.c +1 -1
@@ -185,7 +185,7 @@ static int __init handle_passthrough_prop(struct kernel_info *kinfo,
                                 gaddr_to_gfn(gstart),
                                 PFN_DOWN(size),
                                 maddr_to_mfn(mstart),
-                               p2m_mmio_direct_dev);
+                               p2m_mmio_direct);

... a per-arch inline function which returns the type to use here. The name of the function would want to properly reflect the purpose; my limited DT knowledge may make arch_dt_passthrough_p2m_type() an entirely wrong suggestion.

... But make it even more generic by providing an inline function which just return p2m_type_t would be really better.

~ Oleksii

#28 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Oleksii Kurochko
Quoted 12 lines · Oleksii Kurochko
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +10 -0
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
Quoted 5 lines
Quoted 1 line

Hmm, and the pool is then left shrunk by 4 pages?

Yes until they are used for root table it shouldn't be in p2m pool (freelist), when root table will be freed then it makes sense to return them back. Am I missing something?

I'm commenting specifically on the error path here.

Quoted 1 line

Probably, you meant that it is needed to update p2m->pages?

That (I think) I commented on elsewhere, yes.

Jan

#38 lore raw

Re: [PATCH v3 08/20] xen/riscv: add new p2m types and helper macros for type classification

In reply to Jan Beulich
Quoted 27 lines · Jan Beulich
Quoted 8 lines · Oleksii Kurochko

- Extended p2m_type_t with additional types: p2m_mmio_direct, p2m_grant_map_{rw,ro}.
- Added macros to classify memory types: P2M_RAM_TYPES, P2M_GRANT_TYPES.
- Introduced helper predicates: p2m_is_ram(), p2m_is_any_ram().
- Define p2m_mmio_direct to tell handle_passthrough_prop() from common code how to map device memory.

Almost ready to be acked, except for ...

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +0 -0
@@ -62,8 +62,30 @@ struct p2m_domain {
  typedef enum {

xen/arch/riscv/include/asm/p2m.h struct p2m_domain { · line 72

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +6 -0
      p2m_invalid = 0,    /* Nothing mapped here */
      p2m_ram_rw,         /* Normal read/write domain RAM */
+    p2m_mmio_direct_io, /* Read/write mapping of genuine Device MMIO area,
+                           PTE_PBMT_IO will be used for such mappings */
+    p2m_ext_storage,    /* Following types'll be stored outsude PTE bits: */
+    p2m_grant_map_rw,   /* Read/write grant mapping */
+    p2m_grant_map_ro,   /* Read-only grant mapping */
  } p2m_type_t;
 
+#define p2m_mmio_direct p2m_mmio_direct_io

... this (see reply to patch 09).

Quoted 7 lines

xen/arch/riscv/include/asm/p2m.h struct p2m_domain { · line 75

Quoted 2 lines
xen/arch/riscv/include/asm/p2m.h +2 -0
+/* We use bitmaps and mask to handle groups of types */
+#define p2m_to_mask(t_) BIT(t_, UL)

I notice that you moved the underscore to the back of the parameters, compared to how Arm has it. I wonder though: What use are these underscores in the first place, here and below? (There are macros where conflicts could arise, but the ones here don't fall in that group, afaict.)

Good point, there is really no name conflicts here, so underscore could be just dropped.

~ Oleksii

#33 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Oleksii Kurochko
Quoted 29 lines · Oleksii Kurochko
Quoted 18 lines · Jan Beulich
Quoted 17 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +17 -0
+static int p2m_alloc_root_table(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;
+    struct page_info *page;
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES;
+
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
+
Quoted 8 lines

xen/arch/riscv/p2m.c line 83

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+    p2m->root = page;
+
+    return 0;
+}

In the success case, shouldn't you bump the paging pool's total_pages by P2M_ROOT_PAGES? (As the freeing side is missing so far, it's not easy to tell whether there's [going to be] a balancing problem in the long run. In the short run there certainly is.)

Quoted 5 lines

I think that total_pages should be updated only in case when page is added to freelist.
In the case of p2m root table, we just returning some pages to domheap and durint that decreasing an amount of total_pages as freelist has lesser pages, and then just allocate pages from domheap without adding them to freelist.

But how's freeing of a root table going to look like? Logically that group of 4 pages would be put back into the pool. And from that the pool's total_pages should reflect that right after successful allocation.

Jan

#29 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Jan Beulich
Quoted 13 lines · Jan Beulich
Quoted 12 lines · Oleksii Kurochko
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +10 -0
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
Quoted 5 lines
Quoted 4 lines
Quoted 1 line

Hmm, and the pool is then left shrunk by 4 pages?

Yes until they are used for root table it shouldn't be in p2m pool (freelist), when root table will be freed then it makes sense to return them back. Am I missing something?

I'm commenting specifically on the error path here.

Ohh, got it.

In this case, should we really care about this 4 pages as a domain can't be ran without allocated page root table and a panic() will be occured anyway according to the create_domUs() common code (construct_domU() -> domain_p2m_set_allocation() -> p2m_set_allocation() -> p2m_alloc_root_table()):
...
rc = construct_domU(&ki, node);
if ( rc )
panic("Could not set up domain %s (rc = %d)\n",
dt_node_name(node), rc);
...
(Note: I missed to return a value returned by p2m_alloc_root_table() in p2m_set_allocation() so it isn't really propagated, at the moment, but I will fix that in the next patch version) ...

Quoted 2 lines
Quoted 1 line

Probably, you meant that it is needed to update p2m->pages?

That (I think) I commented on elsewhere, yes.

...

if it is needed really to update p2m->pages when a page is allocated, I think it will be better to in p2m_allocate_root() immediately after alloc_domheap_pages() is called in p2m_allocate_root().

~ Oleksii

#30 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

Quoted 22 lines · Oleksii Kurochko
Quoted 13 lines · Jan Beulich
Quoted 12 lines · Oleksii Kurochko
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +10 -0
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
Quoted 5 lines
Quoted 4 lines
Quoted 1 line

Hmm, and the pool is then left shrunk by 4 pages?

Yes until they are used for root table it shouldn't be in p2m pool (freelist), when root table will be freed then it makes sense to return them back. Am I missing something?

I'm commenting specifically on the error path here.

Ohh, got it.

Quoted 9 lines

In this case, should we really care about this 4 pages as a domain can't be ran without allocated page root table and a panic() will be occured anyway according to the create_domUs() common code (construct_domU() -> domain_p2m_set_allocation() -> p2m_set_allocation() -> p2m_alloc_root_table()):
...
rc = construct_domU(&ki, node);
if ( rc )
panic("Could not set up domain %s (rc = %d)\n",
dt_node_name(node), rc);

Well, that's for dom0less. Even for tool-stack created VMs there would be no problem. But root tables required on demand (altp2m, nested) would be different. So what you do here may be good enough for now, but likely will want improving later on. (Such temporary restrictions may want putting down somewhere.)

Jan

#34 lore raw

Re: [PATCH v3 06/20] xen/riscv: add root page table allocation

In reply to Jan Beulich
Quoted 28 lines · Jan Beulich
Quoted 27 lines · Oleksii Kurochko
Quoted 26 lines · Jan Beulich
Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +11 -0
+static int p2m_alloc_root_table(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;
+    struct page_info *page;
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES;
+
+    /*
+     * Return back nr_root_pages to assure the root table memory is also
+     * accounted against the P2M pool of the domain.
+     */
+    if ( !paging_ret_pages_to_domheap(d, nr_root_pages) )

xen/arch/riscv/p2m.c line 83

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+        return -ENOMEM;
+
+    page = p2m_allocate_root(d);
+    if ( !page )
+        return -ENOMEM;
+
+    p2m->root = page;
+
+    return 0;
+}

In the success case, shouldn't you bump the paging pool's total_pages by P2M_ROOT_PAGES? (As the freeing side is missing so far, it's not easy to tell whether there's [going to be] a balancing problem in the long run. In the short run there certainly is.)

Quoted 6 lines
Quoted 5 lines

I think that total_pages should be updated only in case when page is added to freelist.
In the case of p2m root table, we just returning some pages to domheap and durint that decreasing an amount of total_pages as freelist has lesser pages, and then just allocate pages from domheap without adding them to freelist.

But how's freeing of a root table going to look like?

We have saved pointer to first page of P2M_ROOT_PAGES allocated for root page table which is stored in p2m->root. Then when a domain is going to be destroyed, then do something like:

    for ( i = 0; i < P2M_ROOT_PAGES; i++ )
        clear_and_clean_page(p2m->root + i);

...

Quoted 3 lines

Logically that group
of 4 pages would be put back into the pool. And from that the pool's total_pages should reflect that right after successful allocation.

... I think instead of having the loop mentioned above we could add root table pages to p2m->pages (as you suggested) in p2m_allocate_root() and then a domain is being destroyed just do the following:
while ( (pg = page_list_remove_head(&p2m->pages)) )

  {
      p2m_free_page(p2m->domain, pg);

And it will be a job of internals of p2m_free_page() -> paging_free_page() to adjust freelist's total_pages and return back page(s) allocated for root table to the freelist. (Note: the current implementation of paging_free_page() just add a page to freelist without updating of freelist's total_pages what looks incorrect. And it will be enough as total_pages is present only for freelist and there is not separate total_pages (or something similar) for p2m->pages).

~ Oleksii

#44 lore raw

Re: [PATCH v3 10/20] xen/riscv: introduce page_{get,set}_xenheap_gfn()

In reply to Jan Beulich
Quoted 21 lines · Jan Beulich
Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/include/asm/mm.h +1 -0
@@ -12,6 +12,7 @@
  #include <xen/sections.h>
  #include <xen/types.h>
 
+#include <asm/cmpxchg.h>
  #include <asm/page.h>
  #include <asm/page-bits.h>
 

xen/arch/riscv/include/asm/mm.h static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr) · line 251

Quoted 7 lines
xen/arch/riscv/include/asm/mm.h +1 -3
@@ -247,9 +248,17 @@ static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr)
  #define PGT_writable_page PG_mask(1, 1)  /* has writable mappings?         */
  #define PGT_type_mask     PG_mask(1, 1)  /* Bits 31 or 63.                 */
 
-/* Count of uses of this frame as its current type. */
-#define PGT_count_width   PG_shift(2)
-#define PGT_count_mask    ((1UL << PGT_count_width) - 1)
+ /* 9-bit count of uses of this frame as its current type. */

Nit: Stray blank at start of line.

Quoted 3 lines

xen/arch/riscv/include/asm/mm.h static inline bool arch_mfns_in_directmap(unsigned long mfn, unsigned long nr) · line 252

Quoted 1 line
xen/arch/riscv/include/asm/mm.h +1 -0
+#define PGT_count_mask    PG_mask(0x3FF, 10)

A 9-bit count corresponds to a mask of 0x1ff, doesn't it? With 0x3ff the count can spill over the type.

It should be really 0x1ff, thanks.

~ Oleksii

#47 lore raw

Re: [PATCH v3 11/20] xen/riscv: implement function to map memory in guest p2m

In reply to Jan Beulich
Quoted 13 lines · Jan Beulich
Quoted 4 lines · Oleksii Kurochko

Implement map_regions_p2mt() to map a region in the guest p2m with a specific p2m type. The memory attributes will be derived from the p2m type. This function is going to be called from dom0less common code.

s/is going to be/is/ ? Such a call exists already, after all.

Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +0 -0
@@ -121,21 +121,22 @@ static inline int guest_physmap_mark_populate_on_demand(struct domain *d,
      return -EOPNOTSUPP;
  }
 
Quoted 14 lines

xen/arch/riscv/include/asm/p2m.h static inline int guest_physmap_mark_populate_on_demand(struct domain *d, · line 125

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +2 -8
-static inline int guest_physmap_add_entry(struct domain *d,
-                                          gfn_t gfn, mfn_t mfn,
-                                          unsigned long page_order,
-                                          p2m_type_t t)
-{
-    BUG_ON("unimplemented");
-    return -EINVAL;
-}
+/*
+ * Map a region in the guest p2m with a specific p2m type.

What is "the guest p2m"? In your answer, please consider the possible (and at some point likely necessary) existence of altp2m and nestedp2m. In patch 04 you introduce p2m_get_hostp2m(), and I expect it's that what you mean here.

In the current one context it is host p2m. I can update the comment with:
"guest's hostp2m".

Quoted 44 lines
Quoted 5 lines
xen/arch/riscv/p2m.c +0 -0
@@ -9,6 +9,41 @@
 

xen/arch/riscv/p2m.c line 19

Quoted 10 lines
xen/arch/riscv/p2m.c +8 -0
  unsigned int __read_mostly p2m_root_order;
 
+/*
+ * Force a synchronous P2M TLB flush.
+ *
+ * Must be called with the p2m lock held.
+ */
+static void p2m_force_tlb_flush_sync(struct p2m_domain *p2m)
+{
+    struct domain *d = p2m->domain;

Pointer-to-const please. Personally, given the implementation of this function (and also ...

xen/arch/riscv/p2m.c line 32

Quoted 12 lines
xen/arch/riscv/p2m.c +12 -0
+    ASSERT(p2m_is_write_locked(p2m));
+
+    sbi_remote_hfence_gvma(d->dirty_cpumask, 0, 0);
+
+    p2m->need_flush = false;
+}
+
+void p2m_tlb_flush_sync(struct p2m_domain *p2m)
+{
+    if ( p2m->need_flush )
+        p2m_force_tlb_flush_sync(p2m);
+}

... this one) I'd further ask for the function parameters to also be pointer-to-const, but Andrew may object to that. Andrew - it continues to be unclear to me under what conditions you agree with adding const, and under what conditions you would object to me asking for such. Please can you take the time to clarify this?

xen/arch/riscv/p2m.c line 39

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+/* Unlock the flush and do a P2M TLB flush if necessary */
+void p2m_write_unlock(struct p2m_domain *p2m)
+{
+    /*
+     * The final flush is done with the P2M write lock taken to avoid
+     * someone else modifying the P2M wbefore the TLB invalidation has

Nit: Stray 'w'.

Quoted 4 lines

xen/arch/riscv/p2m.c line 42

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+     * completed.
+     */
+    p2m_tlb_flush_sync(p2m);

Wasn't the plan to have this be conditional?

Not really, probably, I misunderstood you before.

Previously, I only had|p2m_force_tlb_flush_sync()| here, instead of

|p2m_tlb_flush_sync()|, and the latter includes a condition check on
|p2m->need_flush|.
Quoted 29 lines
Quoted 29 lines
xen/arch/riscv/p2m.c +24 -0
@@ -139,3 +174,33 @@ int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)
 
      return 0;
  }
+
+static int p2m_set_range(struct p2m_domain *p2m,
+                         gfn_t sgfn,
+                         unsigned long nr,
+                         mfn_t smfn,
+                         p2m_type_t t)
+{
+    return -EOPNOTSUPP;
+}
+
+static int p2m_insert_mapping(struct p2m_domain *p2m, gfn_t start_gfn,
+                              unsigned long nr, mfn_t mfn, p2m_type_t t)
+{
+    int rc;
+
+    p2m_write_lock(p2m);
+    rc = p2m_set_range(p2m, start_gfn, nr, mfn, t);
+    p2m_write_unlock(p2m);
+
+    return rc;
+}
+
+int map_regions_p2mt(struct domain *d,
+                     gfn_t gfn,
Quoted 8 lines

xen/arch/riscv/p2m.c int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 206

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+                     unsigned long nr,
+                     mfn_t mfn,
+                     p2m_type_t p2mt)
+{
+    return p2m_insert_mapping(p2m_get_hostp2m(d), gfn, nr, mfn, p2mt);
+}

And eventually both helper functions will gain further callers? Otherwise it's a little hard to see why they would both need to be separate functions.

Good point.
Actually, I think that it is enough to have map_regions_p2mt() as it is used for dom0less common code, and re-use it every where potentially p2m_insert_mapping() will be needed.

~ Oleksii

#48 lore raw

Re: [PATCH v3 11/20] xen/riscv: implement function to map memory in guest p2m

Quoted 13 lines · Oleksii Kurochko
Quoted 12 lines · Jan Beulich

xen/arch/riscv/p2m.c line 39

Quoted 6 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +6 -0
+/* Unlock the flush and do a P2M TLB flush if necessary */
+void p2m_write_unlock(struct p2m_domain *p2m)
+{
+    /*
+     * The final flush is done with the P2M write lock taken to avoid
+     * someone else modifying the P2M wbefore the TLB invalidation has

Nit: Stray 'w'.

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+     * completed.
+     */
+    p2m_tlb_flush_sync(p2m);
Quoted 7 lines
Quoted 1 line

Wasn't the plan to have this be conditional?

Not really, probably, I misunderstood you before.

Previously, I only had|p2m_force_tlb_flush_sync()| here, instead of

|p2m_tlb_flush_sync()|, and the latter includes a condition check on
|p2m->need_flush|.

Just to re-iterate my point: Not every unlock will require a flush. Hence why I expect the flush to be conditional upon there being an indication that some change was done that requires flushing.

Jan

#49 lore raw

Re: [PATCH v3 11/20] xen/riscv: implement function to map memory in guest p2m

Quoted 15 lines · Jan Beulich
Quoted 14 lines · Oleksii Kurochko
Quoted 13 lines · Jan Beulich

xen/arch/riscv/p2m.c line 39

Quoted 6 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +6 -0
+/* Unlock the flush and do a P2M TLB flush if necessary */
+void p2m_write_unlock(struct p2m_domain *p2m)
+{
+    /*
+     * The final flush is done with the P2M write lock taken to avoid
+     * someone else modifying the P2M wbefore the TLB invalidation has

Nit: Stray 'w'.

xen/arch/riscv/p2m.c line 42

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+     * completed.
+     */
+    p2m_tlb_flush_sync(p2m);

Wasn't the plan to have this be conditional?

Quoted 9 lines
Quoted 5 lines

Not really, probably, I misunderstood you before.

Previously, I only had|p2m_force_tlb_flush_sync()| here, instead of

|p2m_tlb_flush_sync()|, and the latter includes a condition check on
|p2m->need_flush|.

Just to re-iterate my point: Not every unlock will require a flush. Hence why I expect the flush to be conditional upon there being an indication that some change was done that requires flushing.

The flush is actually conditional; the condition is inside |p2m_tlb_flush_sync()|:
void p2m_tlb_flush_sync(struct p2m_domain *p2m)

  {
    if ( p2m->need_flush )
      p2m_force_tlb_flush_sync(p2m);

}

~ Oleksii

#50 lore raw

Re: [PATCH v3 11/20] xen/riscv: implement function to map memory in guest p2m

Quoted 26 lines · Oleksii Kurochko
Quoted 15 lines · Jan Beulich
Quoted 14 lines · Oleksii Kurochko
Quoted 13 lines · Jan Beulich

xen/arch/riscv/p2m.c line 39

Quoted 6 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +6 -0
+/* Unlock the flush and do a P2M TLB flush if necessary */
+void p2m_write_unlock(struct p2m_domain *p2m)
+{
+    /*
+     * The final flush is done with the P2M write lock taken to avoid
+     * someone else modifying the P2M wbefore the TLB invalidation has

Nit: Stray 'w'.

xen/arch/riscv/p2m.c line 42

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+     * completed.
+     */
+    p2m_tlb_flush_sync(p2m);

Wasn't the plan to have this be conditional?

Quoted 9 lines
Quoted 5 lines

Not really, probably, I misunderstood you before.

Previously, I only had|p2m_force_tlb_flush_sync()| here, instead of

|p2m_tlb_flush_sync()|, and the latter includes a condition check on
|p2m->need_flush|.

Just to re-iterate my point: Not every unlock will require a flush. Hence why I expect the flush to be conditional upon there being an indication that some change was done that requires flushing.

Quoted 7 lines

The flush is actually conditional; the condition is inside |p2m_tlb_flush_sync()|:

   void p2m_tlb_flush_sync(struct p2m_domain *p2m)
   {
     if ( p2m->need_flush )
       p2m_force_tlb_flush_sync(p2m);
   }

Hmm, I'd consider this misleading function naming then. Especially with "force" and "sync" being kind of redundant with one another already anyway. See x86'es naming.

Jan

#62 lore raw

Re: [PATCH v3 14/20] xen/riscv: Implement p2m_pte_from_mfn() and support PBMT configuration

In reply to Oleksii Kurochko
Quoted 8 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +1 -0
@@ -1,3 +1,4 @@
+#include <xen/bug.h>
 #include <xen/domain_page.h>
 #include <xen/mm.h>
 #include <xen/rwlock.h>

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 205

Quoted 8 lines
xen/arch/riscv/p2m.c +5 -0
@@ -197,6 +198,18 @@ static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
     return __map_domain_page(p2m->root + root_table_indx);
 }
 
+static int p2m_set_type(pte_t *pte, p2m_type_t t)
+{
+    int rc = 0;
+
+    if ( t > p2m_ext_storage )

Seeing this separator enumerator in use, it becomes pretty clear that its name needs to change, so one doesn't need to go look at its definition to understand whether it's inclusive or exclusive. (This isn't helped by there presently being a spare entry, which, when made use of, might then cause problems with expressions like this one as well.)

Quoted 6 lines
xen/arch/riscv/p2m.c +1 -1
@@ -222,11 +235,71 @@ static inline void p2m_clean_pte(pte_t *p, bool clean_pte)
     p2m_write_pte(p, pte, clean_pte);
 }
 
-static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t)
+static void p2m_set_permission(pte_t *e, p2m_type_t t)

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 247

Quoted 10 lines
xen/arch/riscv/p2m.c +8 -1
 {
-    panic("%s: hasn't been implemented yet\n", __func__);
+    e->pte &= ~PTE_ACCESS_MASK;
+
+    switch ( t )
+    {
+    case p2m_grant_map_rw:
+    case p2m_ram_rw:
+        e->pte |= PTE_READABLE | PTE_WRITABLE;
+        break;

While I agree for r/w grants, shouldn't r/w RAM also be executable?

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 249

Quoted 1 line
xen/arch/riscv/p2m.c +1 -0
+    case p2m_ext_storage:

Why exactly would this placeholder ...

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 252

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+    case p2m_mmio_direct_io:
+        e->pte |= PTE_ACCESS_MASK;
+        break;

... gain full access? It shouldn't make it here at all, should it?

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 255

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+
+    case p2m_invalid:
+        e->pte &= ~(PTE_ACCESS_MASK | PTE_VALID);

Redundantly masking off PTE_ACCESS_MASK? (Plus, for the entry to be invalid, turning off PTE_VALID alone ought to suffice anyway?)

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+        break;
+
+    case p2m_grant_map_ro:
+        e->pte |= PTE_READABLE;
+        break;

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 270

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+
+    default:
+        ASSERT_UNREACHABLE();
+        break;
+    }
+}
+
+static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
+{
+    pte_t e = (pte_t) { PTE_VALID };

This and the rest of the function demand that mfn != INVALID_MFN, no matter whether ...

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 284

Quoted 13 lines
xen/arch/riscv/p2m.c +13 -0
+    switch ( t )
+    {
+    case p2m_mmio_direct_io:
+        e.pte |= PTE_PBMT_IO;
+        break;
+
+    default:
+        break;
+    }
+
+    pte_set_mfn(&e, mfn);
+
+    ASSERT(!(mfn_to_maddr(mfn) & ~PADDR_MASK));

... PADDR_MASK is actually narrow enough to catch that case. Maybe best to add an explicit assertion to that effect?

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 293

Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+    if ( !is_table )
+    {
+        p2m_set_permission(&e, t);
+
+        if ( t < p2m_ext_storage )
+            p2m_set_type(&e, t);
+        else
+            panic("unimplemeted\n");

The check is already done inside p2m_set_type() - why open-code it here?

Jan

#66 lore raw

Re: [PATCH v3 15/20] xen/riscv: implement p2m_next_level()

In reply to Oleksii Kurochko

xen/arch/riscv/p2m.c static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table) · line 306

Quoted 8 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +2 -0
@@ -302,6 +302,48 @@ static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
     return e;
 }
 
+/* Generate table entry with correct attributes. */
+static pte_t page_to_p2m_table(struct page_info *page)

You don't mean to alter what page points to, so pointer-to-const please.

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 372

Quoted 7 lines
xen/arch/riscv/p2m.c +2 -1
@@ -326,9 +368,43 @@ static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl,
                           unsigned int level, pte_t **table,
                           unsigned int offset)
 {
-    panic("%s: hasn't been implemented yet\n", __func__);
+    pte_t *entry;
+    int ret;

Please can this move into the more narrow scope it's (solely) used in?

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 376

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+    mfn_t mfn;
+
+    /* The function p2m_next_level() is never called at the last level */
+    ASSERT(level != 0);

The revlog says "move", but ...

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+    entry = *table + offset;
+
+    if ( !pte_is_valid(*entry) )
+    {

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 391

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+        if ( !alloc_tbl )
+            return P2M_TABLE_MAP_NONE;
+
+        ret = p2m_create_table(p2m, entry);
+        if ( ret )
+            return P2M_TABLE_MAP_NOMEM;
+    }
+
+    /* The function p2m_next_level() is never called at the last level */
+    ASSERT(level != 0);

... the original one's still here.

xen/arch/riscv/paging.c void paging_free_page(struct domain *d, struct page_info *pg) · line 94

Quoted 7 lines
xen/arch/riscv/paging.c +1 -0
@@ -91,6 +91,17 @@ void paging_free_page(struct domain *d, struct page_info *pg)
     spin_unlock(&d->arch.paging.lock);
 }
 
+struct page_info * paging_alloc_page(struct domain *d)

Nit: Stray blank after *.

Jan

#68 lore raw

Re: [PATCH v3 16/20] xen/riscv: Implement superpage splitting for p2m mappings

In reply to Oleksii Kurochko
Quoted 29 lines · Oleksii Kurochko

Add support for down large memory mappings ("superpages") in the RISC-V p2m mapping so that smaller, more precise mappings ("finer-grained entries") can be inserted into lower levels of the page table hierarchy.

To implement that the following is done:
- Introduce p2m_split_superpage(): Recursively shatters a superpage into smaller page table entries down to the target level, preserving original permissions and attributes.
- p2m_set_entry() updated to invoke superpage splitting when inserting entries at lower levels within a superpage-mapped region.

This implementation is based on the ARM code, with modifications to the part that follows the BBM (break-before-make) approach, some parts are simplified as according to RISC-V spec:
It is permitted for multiple address-translation cache entries to co-exist for the same address. This represents the fact that in a conventional TLB hierarchy, it is possible for multiple entries to match a single address if, for example, a page is upgraded to a superpage without first clearing the original non-leaf PTE’s valid bit and executing an SFENCE.VMA with rs1=x0, or if multiple TLBs exist in parallel at a given level of the hierarchy. In this case, just as if an SFENCE.VMA is not executed between a write to the memory-management tables and subsequent implicit read of the same address: it is unpredictable whether the old non-leaf PTE or the new leaf PTE is used, but the behavior is otherwise well defined.
In contrast to the Arm architecture, where BBM is mandatory and failing to use it in some cases can lead to CPU instability, RISC-V guarantees stability, and the behavior remains safe — though unpredictable in terms of which translation will be used.

Quoted 2 lines

Additionally, the page table walk logic has been adjusted, as ARM uses the opposite number of levels compared to RISC-V.

As before, I think you mean "numbering".

Quoted 35 lines
xen/arch/riscv/p2m.c +29 -0
@@ -539,6 +539,91 @@ static void p2m_free_subtree(struct p2m_domain *p2m,
     p2m_free_page(p2m, pg);
 }
 
+static bool p2m_split_superpage(struct p2m_domain *p2m, pte_t *entry,
+                                unsigned int level, unsigned int target,
+                                const unsigned int *offsets)
+{
+    struct page_info *page;
+    unsigned long i;
+    pte_t pte, *table;
+    bool rv = true;
+
+    /* Convenience aliases */
+    mfn_t mfn = pte_get_mfn(*entry);
+    unsigned int next_level = level - 1;
+    unsigned int level_order = XEN_PT_LEVEL_ORDER(next_level);
+
+    /*
+     * This should only be called with target != level and the entry is
+     * a superpage.
+     */
+    ASSERT(level > target);
+    ASSERT(pte_is_superpage(*entry, level));
+
+    page = p2m_alloc_page(p2m->domain);
+    if ( !page )
+    {
+        /*
+         * The caller is in charge to free the sub-tree.
+         * As we didn't manage to allocate anything, just tell the
+         * caller there is nothing to free by invalidating the PTE.
+         */

xen/arch/riscv/p2m.c static void p2m_free_subtree(struct p2m_domain *p2m, · line 580

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+        memset(entry, 0, sizeof(*entry));
+        return false;
+    }
+
+    table = __map_domain_page(page);
+
+    /*
+     * We are either splitting a second level 1G page into 512 first level
+     * 2M pages, or a first level 2M page into 512 zero level 4K pages.
+     */

Such a comment is at risk of (silently) going stale when support for 512G mappings is added. I wonder if it's really that informative to have here.

xen/arch/riscv/p2m.c static void p2m_free_subtree(struct p2m_domain *p2m, · line 588

Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+    for ( i = 0; i < XEN_PT_ENTRIES; i++ )
+    {
+        pte_t *new_entry = table + i;
+
+        /*
+         * Use the content of the superpage entry and override
+         * the necessary fields. So the correct permission are kept.
+         */

It's not just permissions though? The memory type field also needs retaining (and is being retained this way). Maybe better say "attributes"?

Jan

#72 lore raw

Re: [PATCH v3 17/20] xen/riscv: implement put_page()

In reply to Oleksii Kurochko
Quoted 1 line · Oleksii Kurochko

Implement put_page(), as it will be used by p2m_put_code().

I would have ack-ed the code change, but the description is irritating:
Who or what is p2m_put_code() (going to be)?

Quoted 3 lines

Although CONFIG_STATIC_MEMORY has not yet been introduced for RISC-V, a stub for PGC_static is added to avoid cluttering the code of put_page_nr() with #ifdefs.

There isn't any put_page_nr() being introduced (anymore), though.

Jan

Acked-by on v3 18/20
#75 lore raw

Re: [PATCH v3 18/20] xen/riscv: implement mfn_valid() and page reference, ownership handling helpers

In reply to Oleksii Kurochko
Quoted 21 lines · Oleksii Kurochko

Implement the mfn_valid() macro to verify whether a given MFN is valid by checking that it falls within the range [start_page, max_page). These bounds are initialized based on the start and end addresses of RAM.

As part of this patch, start_page is introduced and initialized with the PFN of the first RAM page.
Also, initialize pdx_group_valid() by calling set_pdx_range() when memory banks are being mapped.

Also, after providing a non-stub implementation of the mfn_valid() macro,
the following compilation errors started to occur:
riscv64-linux-gnu-ld: prelink.o: in function `__next_node':
/build/xen/./include/xen/nodemask.h:202: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `get_free_buddy':
/build/xen/common/page_alloc.c:881: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `alloc_heap_pages':
/build/xen/common/page_alloc.c:1043: undefined reference to `page_get_owner_and_reference'
riscv64-linux-gnu-ld: /build/xen/common/page_alloc.c:1098: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `ns16550_interrupt':
/build/xen/drivers/char/ns16550.c:205: undefined reference to `get_page'
riscv64-linux-gnu-ld: ./.xen-syms.0: hidden symbol `page_get_owner_and_reference' isn't defined

Quoted 8 lines

riscv64-linux-gnu-ld: final link failed: bad value
make[2]: *** [arch/riscv/Makefile:35: xen-syms] Error 1
To resolve these errors, the following functions have also been introduced, based on their Arm counterparts:
- page_get_owner_and_reference() and its variant to safely acquire a reference to a page and retrieve its owner.
- A stub for page_is_ram_type() that currently always returns 0 and asserts unreachable, as RAM type checking is not yet implemented.

For this latter part I can only repeat that the code is reachable, and hence it is wrong to put ASSERT_UNREACHABLE() there. That's true for Arm's code as well.

Quoted 1 line

With said line dropped:

Jan

#78 lore raw

Re: [PATCH v3 19/20] xen/riscv: add support of page lookup by GFN

In reply to Oleksii Kurochko
Quoted 24 lines · Oleksii Kurochko

Introduce helper functions for safely querying the P2M (physical-to-machine) mapping:
- add p2m_read_lock(), p2m_read_unlock(), and p2m_is_locked() for managing P2M lock state.
- Implement p2m_get_entry() to retrieve mapping details for a given GFN, including MFN, page order, and validity.
- Add p2m_lookup() to encapsulate read-locked MFN retrieval.
- Introduce p2m_get_page_from_gfn() to convert a GFN into a page_info pointer, acquiring a reference to the page if valid.
- Introduce get_page().

Implementations are based on Arm's functions with some minor modifications:
- p2m_get_entry():
- Reverse traversal of page tables, as RISC-V uses the opposite level numbering compared to Arm.
- Removed the return of p2m_access_t from p2m_get_entry() since mem_access_settings is not introduced for RISC-V.
- Updated BUILD_BUG_ON() to check using the level 0 mask, which corresponds to Arm's THIRD_MASK.
- Replaced open-coded bit shifts with the BIT() macro.
- Other minor changes, such as using RISC-V-specific functions to validate P2M PTEs, and replacing Arm-specific GUEST_* macros with their RISC-V equivalents.

Quoted 4 lines

---
Changes in V3:
- Add is_p2m_foreign() macro and connected stuff.

What is this about?

Quoted 7 lines
xen/arch/riscv/include/asm/p2m.h +1 -0
@@ -202,6 +202,24 @@ static inline int p2m_is_write_locked(struct p2m_domain *p2m)
 
 unsigned long construct_hgatp(struct p2m_domain *p2m, uint16_t vmid);
 
+static inline void p2m_read_lock(struct p2m_domain *p2m)

xen/arch/riscv/include/asm/p2m.h static inline int p2m_is_write_locked(struct p2m_domain *p2m) · line 215

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+{
+    read_lock(&p2m->lock);
+}
+
+static inline void p2m_read_unlock(struct p2m_domain *p2m)
+{
+    read_unlock(&p2m->lock);
+}
+
+static inline int p2m_is_locked(struct p2m_domain *p2m)

bool return type (also for p2m_is_write_locked() in patch 11)? Also perhaps pointer-to-const parameter?

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 859

Quoted 11 lines
xen/arch/riscv/p2m.c +5 -0
@@ -852,3 +852,139 @@ int map_regions_p2mt(struct domain *d,
 {
     return p2m_insert_mapping(p2m_get_hostp2m(d), gfn, nr, mfn, p2mt);
 }
+
+/*
+ * Get the details of a given gfn.
+ *
+ * If the entry is present, the associated MFN will be returned type filled up.

This sentence doesn't really parse, perhaps due to missing words.

Quoted 12 lines
xen/arch/riscv/p2m.c +12 -0
+ * The page_order will correspond to the order of the mapping in the page
+ * table (i.e it could be a superpage).
+ *
+ * If the entry is not present, INVALID_MFN will be returned and the
+ * page_order will be set according to the order of the invalid range.
+ *
+ * valid will contain the value of bit[0] (e.g valid bit) of the
+ * entry.
+ */
+static mfn_t p2m_get_entry(struct p2m_domain *p2m, gfn_t gfn,
+                           p2m_type_t *t,
+                           unsigned int *page_order,

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 881

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+                           bool *valid)
+{
+    unsigned int level = 0;
+    pte_t entry, *table;
+    int rc;
+    mfn_t mfn = INVALID_MFN;
+    DECLARE_OFFSETS(offsets, gfn_to_gaddr(gfn));
+
+    ASSERT(p2m_is_locked(p2m));
+    BUILD_BUG_ON(XEN_PT_LEVEL_MAP_MASK(0) != PAGE_MASK);

What function-wide property is this check about? Even when moved ...

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 886

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+    if ( valid )
+        *valid = false;
+
+    /* XXX: Check if the mapping is lower than the mapped gfn */

(Nested: What is this about?)

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 892

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+    /* This gfn is higher than the highest the p2m map currently holds */
+    if ( gfn_x(gfn) > gfn_x(p2m->max_mapped_gfn) )
+    {
+        for ( level = P2M_ROOT_LEVEL; level; level-- )
+            if ( (gfn_x(gfn) & (XEN_PT_LEVEL_MASK(level) >> PAGE_SHIFT)) >

... into the more narrow scope where another XEN_PT_LEVEL_MASK() exists I can't really spot what the check is to guard against.

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 904

Quoted 12 lines
xen/arch/riscv/p2m.c +12 -0
+                 gfn_x(p2m->max_mapped_gfn) )
+                break;
+
+        goto out;
+    }
+
+    table = p2m_get_root_pointer(p2m, gfn);
+
+    /*
+     * the table should always be non-NULL because the gfn is below
+     * p2m->max_mapped_gfn and the root table pages are always present.
+     */

Nit: Style.

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 914

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    if ( !table )
+    {
+        ASSERT_UNREACHABLE();
+        level = P2M_ROOT_LEVEL;
+        goto out;
+    }
+
+    for ( level = P2M_ROOT_LEVEL; level; level-- )
+    {
+        rc = p2m_next_level(p2m, true, level, &table, offsets[level]);

Why would you blindly allocate a page table (hierarchy) here? If anything, this may need doing upon caller request (as it's only up the call chain where the necessary knowledge exists). For example, ...

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 956

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+static mfn_t p2m_lookup(struct p2m_domain *p2m, gfn_t gfn, p2m_type_t *t)
+{
+    mfn_t mfn;
+
+    p2m_read_lock(p2m);
+    mfn = p2m_get_entry(p2m, gfn, t, NULL, NULL);

... this (by its name) pretty likely won't want allocation, while ...

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 964

Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+    p2m_read_unlock(p2m);
+
+    return mfn;
+}
+
+struct page_info *p2m_get_page_from_gfn(struct p2m_domain *p2m, gfn_t gfn,
+                                        p2m_type_t *t)
+{

... this will. Yet then ...

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 967

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+    struct page_info *page;
+    p2m_type_t p2mt = p2m_invalid;
+    mfn_t mfn = p2m_lookup(p2m, gfn, t);

... you use the earlier one here.

Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+    if ( !mfn_valid(mfn) )
+        return NULL;
+
+    if ( t )
+        p2mt = *t;
+
+    page = mfn_to_page(mfn);
+

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 986

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    /*
+     * get_page won't work on foreign mapping because the page doesn't
+     * belong to the current domain.
+     */
+    if ( p2m_is_foreign(p2mt) )
+    {
+        struct domain *fdom = page_get_owner_and_reference(page);
+        ASSERT(fdom != NULL);
+        ASSERT(fdom != p2m->domain);
+        return page;

In a release build (with no assertions) this will be wrong if either of the two condition would not be satisfied. See x86'es respective code.

Jan

#63 lore raw

Re: [PATCH v3 14/20] xen/riscv: Implement p2m_pte_from_mfn() and support PBMT configuration

In reply to Jan Beulich
Quoted 12 lines · Jan Beulich
Quoted 11 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +1 -0
@@ -1,3 +1,4 @@
+#include <xen/bug.h>
  #include <xen/domain_page.h>
  #include <xen/mm.h>
  #include <xen/rwlock.h>
@@ -197,6 +198,18 @@ static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
      return __map_domain_page(p2m->root + root_table_indx);
  }
 
Quoted 10 lines

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 205

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+static int p2m_set_type(pte_t *pte, p2m_type_t t)
+{
+    int rc = 0;
+
+    if ( t > p2m_ext_storage )

Seeing this separator enumerator in use, it becomes pretty clear that its name needs to change, so one doesn't need to go look at its definition to understand whether it's inclusive or exclusive. (This isn't helped by there presently being a spare entry, which, when made use of, might then cause problems with expressions like this one as well.)

Then|p2m_pte_type_count| might be a better name, as it indicates how many types are stored directly in the PTE bits.

Quoted 19 lines
Quoted 7 lines
xen/arch/riscv/p2m.c +1 -1
@@ -222,11 +235,71 @@ static inline void p2m_clean_pte(pte_t *p, bool clean_pte)
      p2m_write_pte(p, pte, clean_pte);
  }
 
-static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t)
+static void p2m_set_permission(pte_t *e, p2m_type_t t)

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 247

Quoted 10 lines
xen/arch/riscv/p2m.c +8 -1
  {
-    panic("%s: hasn't been implemented yet\n", __func__);
+    e->pte &= ~PTE_ACCESS_MASK;
+
+    switch ( t )
+    {
+    case p2m_grant_map_rw:
+    case p2m_ram_rw:
+        e->pte |= PTE_READABLE | PTE_WRITABLE;
+        break;

While I agree for r/w grants, shouldn't r/w RAM also be executable?

Quoted 7 lines

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 249

Quoted 1 line
xen/arch/riscv/p2m.c +1 -0
+    case p2m_ext_storage:

Why exactly would this placeholder ...

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 252

Quoted 3 lines
xen/arch/riscv/p2m.c +3 -0
+    case p2m_mmio_direct_io:
+        e->pte |= PTE_ACCESS_MASK;
+        break;

... gain full access? It shouldn't make it here at all, should it?

I missed to add break between them, but I don't remember why I put it here.
It could be freely moved before "default".

And, yes, you are right it seems like is shouldn't be handled at all in this function as this function isn't expected to be called with this type as this type only is used to indicate that a real type is stored somwehere.

Quoted 6 lines

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 255

Quoted 4 lines
xen/arch/riscv/p2m.c +3 -0
+
+    case p2m_invalid:
+        e->pte &= ~(PTE_ACCESS_MASK | PTE_VALID);

Redundantly masking off PTE_ACCESS_MASK? (Plus, for the entry to be invalid, turning off PTE_VALID alone ought to suffice anyway?)

Agree, turning off PTE_VALID would be just enough.

Quoted 18 lines
Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+        break;
+
+    case p2m_grant_map_ro:
+        e->pte |= PTE_READABLE;
+        break;

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 270

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+
+    default:
+        ASSERT_UNREACHABLE();
+        break;
+    }
+}
+
+static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
+{
+    pte_t e = (pte_t) { PTE_VALID };

This and the rest of the function demand that mfn != INVALID_MFN, no matter whether ...

Quoted 15 lines

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 284

Quoted 13 lines
xen/arch/riscv/p2m.c +13 -0
+    switch ( t )
+    {
+    case p2m_mmio_direct_io:
+        e.pte |= PTE_PBMT_IO;
+        break;
+
+    default:
+        break;
+    }
+
+    pte_set_mfn(&e, mfn);
+
+    ASSERT(!(mfn_to_maddr(mfn) & ~PADDR_MASK));

... PADDR_MASK is actually narrow enough to catch that case. Maybe best to add an explicit assertion to that effect?

Then it should be enough instead of what we have now:
ASSERT(mfn_valid(mfn));

Quoted 10 lines

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 293

Quoted 9 lines
xen/arch/riscv/p2m.c +8 -0
+    if ( !is_table )
+    {
+        p2m_set_permission(&e, t);
+
+        if ( t < p2m_ext_storage )
+            p2m_set_type(&e, t);
+        else
+            panic("unimplemeted\n");

The check is already done inside p2m_set_type() - why open-code it here?

It isn't really matters now (so could be dropped), but in further patch this part of code will look like:

        metadata[indx].pte = p2m_invalid;

        if ( t < p2m_ext_storage )
            p2m_set_type(&e, t, indx);
        else
        {
            e.pte |= MASK_INSR(p2m_ext_storage, P2M_TYPE_PTE_BITS_MASK);
            p2m_set_type(metadata, t, indx);
        }

So my intention was to re-use p2m_set_type() without changing of a prototype. So, if a type is stored in PTE bits then we pass PTE directly, if not - then pass metadata.

Thanks.

~ Oleksii

#64 lore raw

Re: [PATCH v3 14/20] xen/riscv: Implement p2m_pte_from_mfn() and support PBMT configuration

Quoted 24 lines · Oleksii Kurochko
Quoted 7 lines · Jan Beulich

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 270

Quoted 3 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +3 -0
+static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
+{
+    pte_t e = (pte_t) { PTE_VALID };

This and the rest of the function demand that mfn != INVALID_MFN, no matter whether ...

Quoted 15 lines

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 284

Quoted 13 lines
xen/arch/riscv/p2m.c +13 -0
+    switch ( t )
+    {
+    case p2m_mmio_direct_io:
+        e.pte |= PTE_PBMT_IO;
+        break;
+
+    default:
+        break;
+    }
+
+    pte_set_mfn(&e, mfn);
+
+    ASSERT(!(mfn_to_maddr(mfn) & ~PADDR_MASK));

... PADDR_MASK is actually narrow enough to catch that case. Maybe best to add an explicit assertion to that effect?

Quoted 2 lines

Then it should be enough instead of what we have now:

   ASSERT(mfn_valid(mfn));

No, that would exclude MMIO living beyond max_page.

Quoted 21 lines
Quoted 9 lines

xen/arch/riscv/p2m.c static inline void p2m_clean_pte(pte_t *p, bool clean_pte) · line 293

Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+    if ( !is_table )
+    {
+        p2m_set_permission(&e, t);
+
+        if ( t < p2m_ext_storage )
+            p2m_set_type(&e, t);
+        else
+            panic("unimplemeted\n");

The check is already done inside p2m_set_type() - why open-code it here?

It isn't really matters now (so could be dropped), but in further patch this part of code will look like:

         metadata[indx].pte = p2m_invalid;

         if ( t < p2m_ext_storage )
             p2m_set_type(&e, t, indx);
         else
         {
             e.pte |= MASK_INSR(p2m_ext_storage, P2M_TYPE_PTE_BITS_MASK);
             p2m_set_type(metadata, t, indx);
         }
Quoted 3 lines

So my intention was to re-use p2m_set_type() without changing of a prototype. So, if a type is stored in PTE bits then we pass PTE directly, if not - then pass metadata.

Then at the very least p2m_set_type() may not be a good name; a function of this name imo should set the type, whatever it takes to do so. But I'm unconvinced of the model as a whole.

Jan

#69 lore raw

Re: [PATCH v3 16/20] xen/riscv: Implement superpage splitting for p2m mappings

In reply to Jan Beulich
Quoted 30 lines · Jan Beulich
Quoted 29 lines · Oleksii Kurochko

Add support for down large memory mappings ("superpages") in the RISC-V p2m mapping so that smaller, more precise mappings ("finer-grained entries") can be inserted into lower levels of the page table hierarchy.

To implement that the following is done:
- Introduce p2m_split_superpage(): Recursively shatters a superpage into smaller page table entries down to the target level, preserving original permissions and attributes.
- p2m_set_entry() updated to invoke superpage splitting when inserting entries at lower levels within a superpage-mapped region.

This implementation is based on the ARM code, with modifications to the part that follows the BBM (break-before-make) approach, some parts are simplified as according to RISC-V spec:
It is permitted for multiple address-translation cache entries to co-exist for the same address. This represents the fact that in a conventional TLB hierarchy, it is possible for multiple entries to match a single address if, for example, a page is upgraded to a superpage without first clearing the original non-leaf PTE’s valid bit and executing an SFENCE.VMA with rs1=x0, or if multiple TLBs exist in parallel at a given level of the hierarchy. In this case, just as if an SFENCE.VMA is not executed between a write to the memory-management tables and subsequent implicit read of the same address: it is unpredictable whether the old non-leaf PTE or the new leaf PTE is used, but the behavior is otherwise well defined.
In contrast to the Arm architecture, where BBM is mandatory and failing to use it in some cases can lead to CPU instability, RISC-V guarantees stability, and the behavior remains safe — though unpredictable in terms of which translation will be used.

Quoted 3 lines
Quoted 2 lines

Additionally, the page table walk logic has been adjusted, as ARM uses the opposite number of levels compared to RISC-V.

As before, I think you mean "numbering".

Yes, level numbering would be better.

Quoted 40 lines
Quoted 40 lines
xen/arch/riscv/p2m.c +33 -0
@@ -539,6 +539,91 @@ static void p2m_free_subtree(struct p2m_domain *p2m,
      p2m_free_page(p2m, pg);
  }
 
+static bool p2m_split_superpage(struct p2m_domain *p2m, pte_t *entry,
+                                unsigned int level, unsigned int target,
+                                const unsigned int *offsets)
+{
+    struct page_info *page;
+    unsigned long i;
+    pte_t pte, *table;
+    bool rv = true;
+
+    /* Convenience aliases */
+    mfn_t mfn = pte_get_mfn(*entry);
+    unsigned int next_level = level - 1;
+    unsigned int level_order = XEN_PT_LEVEL_ORDER(next_level);
+
+    /*
+     * This should only be called with target != level and the entry is
+     * a superpage.
+     */
+    ASSERT(level > target);
+    ASSERT(pte_is_superpage(*entry, level));
+
+    page = p2m_alloc_page(p2m->domain);
+    if ( !page )
+    {
+        /*
+         * The caller is in charge to free the sub-tree.
+         * As we didn't manage to allocate anything, just tell the
+         * caller there is nothing to free by invalidating the PTE.
+         */
+        memset(entry, 0, sizeof(*entry));
+        return false;
+    }
+
Quoted 8 lines

xen/arch/riscv/p2m.c static void p2m_free_subtree(struct p2m_domain *p2m, · line 580

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+    table = __map_domain_page(page);
+
+    /*
+     * We are either splitting a second level 1G page into 512 first level
+     * 2M pages, or a first level 2M page into 512 zero level 4K pages.
+     */

Such a comment is at risk of (silently) going stale when support for 512G mappings is added. I wonder if it's really that informative to have here.

Good point, I think we could really drop it.
Regarding support for 512G mappings. Is it really make sense to support such big mappings? It seems like some operations as splitting or sub-entry freeing could be pretty long under some circumstances.

Quoted 11 lines

xen/arch/riscv/p2m.c static void p2m_free_subtree(struct p2m_domain *p2m, · line 588

Quoted 9 lines
xen/arch/riscv/p2m.c +8 -0
+    for ( i = 0; i < XEN_PT_ENTRIES; i++ )
+    {
+        pte_t *new_entry = table + i;
+
+        /*
+         * Use the content of the superpage entry and override
+         * the necessary fields. So the correct permission are kept.
+         */

It's not just permissions though? The memory type field also needs retaining (and is being retained this way). Maybe better say "attributes"?

Sure, I'll use "attributes" instead.

Thanks.

~ Oleksii

#73 lore raw

Re: [PATCH v3 17/20] xen/riscv: implement put_page()

In reply to Jan Beulich
Quoted 4 lines · Jan Beulich
Quoted 1 line · Oleksii Kurochko

Implement put_page(), as it will be used by p2m_put_code().

I would have ack-ed the code change, but the description is irritating:
Who or what is p2m_put_code() (going to be)?

It should be p2m_put_*-related code.

Quoted 5 lines
Quoted 4 lines

Although CONFIG_STATIC_MEMORY has not yet been introduced for RISC-V, a stub for PGC_static is added to avoid cluttering the code of put_page_nr() with #ifdefs.

There isn't any put_page_nr() being introduced (anymore), though.

I'll correct the commit message, it should be put_page() here.

Thanks.

~ Oleksii

#76 lore raw

Re: [PATCH v3 18/20] xen/riscv: implement mfn_valid() and page reference, ownership handling helpers

In reply to Jan Beulich
Quoted 30 lines · Jan Beulich
Quoted 21 lines · Oleksii Kurochko

Implement the mfn_valid() macro to verify whether a given MFN is valid by checking that it falls within the range [start_page, max_page). These bounds are initialized based on the start and end addresses of RAM.

As part of this patch, start_page is introduced and initialized with the PFN of the first RAM page.
Also, initialize pdx_group_valid() by calling set_pdx_range() when memory banks are being mapped.

Also, after providing a non-stub implementation of the mfn_valid() macro,
the following compilation errors started to occur:
riscv64-linux-gnu-ld: prelink.o: in function `__next_node':
/build/xen/./include/xen/nodemask.h:202: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `get_free_buddy':
/build/xen/common/page_alloc.c:881: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `alloc_heap_pages':
/build/xen/common/page_alloc.c:1043: undefined reference to `page_get_owner_and_reference'
riscv64-linux-gnu-ld: /build/xen/common/page_alloc.c:1098: undefined reference to `page_is_ram_type'
riscv64-linux-gnu-ld: prelink.o: in function `ns16550_interrupt':
/build/xen/drivers/char/ns16550.c:205: undefined reference to `get_page'
riscv64-linux-gnu-ld: ./.xen-syms.0: hidden symbol `page_get_owner_and_reference' isn't defined

Quoted 8 lines

riscv64-linux-gnu-ld: final link failed: bad value
make[2]: *** [arch/riscv/Makefile:35: xen-syms] Error 1
To resolve these errors, the following functions have also been introduced, based on their Arm counterparts:
- page_get_owner_and_reference() and its variant to safely acquire a reference to a page and retrieve its owner.
- A stub for page_is_ram_type() that currently always returns 0 and asserts unreachable, as RAM type checking is not yet implemented.

Quoted 2 lines

For this latter part I can only repeat that the code is reachable, and hence it is wrong to put ASSERT_UNREACHABLE() there. That's true for Arm's code as well.

I will drop this stuff in the next patch version.

Quoted 4 lines
Quoted 2 lines

With said line dropped:

Thanks.

~ Oleksii

#82 lore raw

Re: [PATCH v3 20/20] xen/riscv: introduce metadata table to store P2M type

In reply to Oleksii Kurochko
Quoted 11 lines · Oleksii Kurochko

RISC-V's PTE has only two available bits that can be used to store the P2M type. This is insufficient to represent all the current RISC-V P2M types. Therefore, some P2M types must be stored outside the PTE bits.

To address this, a metadata table is introduced to store P2M types that cannot fit in the PTE itself. Not all P2M types are stored in the metadata table—only those that require it.

The metadata table is linked to the intermediate page table via the struct page_info's list field of the corresponding intermediate page.

Quoted 7 lines

To simplify the allocation and linking of intermediate and metadata page tables, p2m_{alloc,free}_table() functions are implemented.

These changes impact p2m_split_superpage(), since when a superpage is split, it is necessary to update the metadata table of the new intermediate page table — if the entry being split has its P2M type set to p2m_ext_storage in its P2M_TYPES bits.

Oh, this was an aspect I didn't realize when commenting on the name of the enumerator. I think you want to keep the name for the purpose here, but you better wouldn't apply relational operators to it (and hence have a second value to serve that purpose).

Quoted 8 lines

In addition to updating
the metadata of the new intermediate page table, the corresponding entry in the metadata for the original superpage is invalidated.

Also, update p2m_{get,set}_type to work with P2M types which don't fit into PTE bits.

No Suggested-by: or anything?

xen/arch/riscv/include/asm/mm.h struct page_info · line 154

Quoted 8 lines
xen/arch/riscv/include/asm/mm.h +2 -0
@@ -150,6 +150,15 @@ struct page_info
             /* Order-size of the free chunk this page is the head of. */
             unsigned int order;
         } free;
+
+        /* Page is used to store metadata: p2m type. */

That's not correct. The page thus described is what the pointer below points to. Here it's more like "Page is used as an intermediate P2M page table".

xen/arch/riscv/include/asm/mm.h struct page_info · line 161

Quoted 7 lines
xen/arch/riscv/include/asm/mm.h +7 -0
+        struct {
+            /*
+             * Pointer to a page which store metadata for an intermediate page
+             * table.
+             */
+            struct page_info *metadata;
+        } md;

In the description you say you would re-use the list field.

Quoted 29 lines
xen/arch/riscv/p2m.c +15 -1
@@ -101,7 +101,16 @@ static int p2m_alloc_root_table(struct p2m_domain *p2m)
 {
     struct domain *d = p2m->domain;
     struct page_info *page;
-    const unsigned int nr_root_pages = P2M_ROOT_PAGES;
+    /*
+     * If the root page table starts at Level <= 2, and since only 1GB, 2MB,
+     * and 4KB mappings are supported (as enforced by the ASSERT() in
+     * p2m_set_entry()), it is necessary to allocate P2M_ROOT_PAGES for
+     * the root page table itself, plus an additional P2M_ROOT_PAGES for
+     * metadata storage. This is because only two free bits are available in
+     * the PTE, which are not sufficient to represent all possible P2M types.
+     */
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES *
+                                       ((P2M_ROOT_LEVEL <= 2) ? 2 : 1);
 
     /*
      * Return back nr_root_pages to assure the root table memory is also
@@ -114,6 +123,23 @@ static int p2m_alloc_root_table(struct p2m_domain *p2m)
     if ( !page )
         return -ENOMEM;
 
+    if ( P2M_ROOT_LEVEL <= 2 )
+    {
+        /*
+         * In the case where P2M_ROOT_LEVEL <= 2, it is necessary to allocate
+         * a page of the same size as that used for the root page table.

xen/arch/riscv/p2m.c static int p2m_alloc_root_table(struct p2m_domain *p2m) · line 140

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+         * Therefore, p2m_allocate_root() can be safely reused.
+         */
+        struct page_info *metadata = p2m_allocate_root(d);
+        if ( !metadata )
+        {
+            free_domheap_pages(page, P2M_ROOT_ORDER);
+            return -ENOMEM;
+        }
+
+        page->v.md.metadata = metadata;

Don't you need to install such a link for every one of the 4 pages?

Quoted 5 lines
xen/arch/riscv/p2m.c +0 -1
@@ -198,24 +224,25 @@ static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
     return __map_domain_page(p2m->root + root_table_indx);
 }
 
-static int p2m_set_type(pte_t *pte, p2m_type_t t)

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 233

Quoted 10 lines
xen/arch/riscv/p2m.c +5 -3
+static void p2m_set_type(pte_t *pte, const p2m_type_t t, const unsigned int i)
 {
-    int rc = 0;
-
     if ( t > p2m_ext_storage )
-        panic("unimplemeted\n");
+    {
+        ASSERT(pte);
+
+        pte[i].pte = t;

What does i identify here?

Quoted 9 lines
xen/arch/riscv/p2m.c +2 -3
+    }
     else
         pte->pte |= MASK_INSR(t, P2M_TYPE_PTE_BITS_MASK);
-
-    return rc;
 }
 
-static p2m_type_t p2m_get_type(const pte_t pte)
+static p2m_type_t p2m_get_type(const pte_t pte, const pte_t *metadata,

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 248

Quoted 10 lines
xen/arch/riscv/p2m.c +2 -1
+                               const unsigned int i)
 {
     p2m_type_t type = MASK_EXTR(pte.pte, P2M_TYPE_PTE_BITS_MASK);
 
     if ( type == p2m_ext_storage )
-        panic("unimplemented\n");
+        type = metadata[i].pte;
 
     return type;
 }

Overall this feels pretty fragile, as the caller has to pass several values which all need to be in sync with one another. If you ...

Quoted 13 lines
xen/arch/riscv/p2m.c +4 -1
@@ -265,7 +292,10 @@ static void p2m_set_permission(pte_t *e, p2m_type_t t)
     }
 }
 
-static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
+static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t,
+                              struct page_info *metadata_pg,
+                              const unsigned int indx,
+                              bool is_table)
 {
     pte_t e = (pte_t) { PTE_VALID };
 

xen/arch/riscv/p2m.c static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table) · line 318

Quoted 4 lines
xen/arch/riscv/p2m.c +1 -0
@@ -285,12 +315,21 @@ static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
 
     if ( !is_table )
     {
+        pte_t *metadata = __map_domain_page(metadata_pg);

... map the page anyway, no matter whether ...

xen/arch/riscv/p2m.c static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table) · line 330

Quoted 13 lines
xen/arch/riscv/p2m.c +7 -2
         p2m_set_permission(&e, t);
 
+        metadata[indx].pte = p2m_invalid;
+
         if ( t < p2m_ext_storage )
-            p2m_set_type(&e, t);
+            p2m_set_type(&e, t, indx);
         else
-            panic("unimplemeted\n");
+        {
+            e.pte |= MASK_INSR(p2m_ext_storage, P2M_TYPE_PTE_BITS_MASK);
+            p2m_set_type(metadata, t, indx);
+        }

... you'll actually use it, maybe best to map both pages at the same point?

And as said elsewhere, no, I don't think you want to use p2m_set_type() for two entirely different purposes.

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 374

Quoted 12 lines
xen/arch/riscv/p2m.c +8 -0
@@ -323,22 +364,71 @@ static struct page_info *p2m_alloc_page(struct p2m_domain *p2m)
     return pg;
 }
 
+static void p2m_free_page(struct p2m_domain *p2m, struct page_info *pg);
+
+/*
+ * Allocate a page table with an additional extra page to store
+ * metadata for each entry of the page table.
+ * Link this metadata page to page table page's list field.
+ */
+static struct page_info * p2m_alloc_table(struct p2m_domain *p2m)

Nit: Stray blank after * again.

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 378

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+{
+    enum table_type
+    {
+        INTERMEDIATE_TABLE=0,

If you really think you need the "= 0", then please with blanks around '='.

Quoted 17 lines
xen/arch/riscv/p2m.c +17 -0
+        /*
+         * At the moment, metadata is going to store P2M type
+         * for each PTE of page table.
+         */
+        METADATA_TABLE,
+        TABLE_MAX
+    };
+
+    struct page_info *tables[TABLE_MAX];
+
+    for ( unsigned int i = 0; i < TABLE_MAX; i++ )
+    {
+        tables[i] = p2m_alloc_page(p2m);
+
+        if ( !tables[i] )
+            goto out;
+

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 405

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+        clear_and_clean_page(tables[i]);
+    }
+
+    tables[INTERMEDIATE_TABLE]->v.md.metadata = tables[METADATA_TABLE];
+
+    return tables[INTERMEDIATE_TABLE];
+
+ out:
+    for ( unsigned int i = 0; i < TABLE_MAX; i++ )
+        if ( tables[i] )

You didn't clear all of tables[] first, though. This kind of cleanup is often better done as

    while ( i-- > 0 )
        ...

You don't even need an if() then, as you know allocations succeeded for all earlier array slots.

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 409

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+            p2m_free_page(p2m, tables[i]);
+
+    return NULL;
+}

I'm also surprised you allocate the metadata table no matter whether you'll actually need it. That'll double your average paging pool usage, when in a typical case only very few entries would actually require this extra storage.

Quoted 14 lines
xen/arch/riscv/p2m.c +1 -2
@@ -453,10 +543,9 @@ static void p2m_put_2m_superpage(mfn_t mfn, p2m_type_t type)
 }
 
 /* Put any references on the page referenced by pte. */
-static void p2m_put_page(const pte_t pte, unsigned int level)
+static void p2m_put_page(const pte_t pte, unsigned int level, p2m_type_t p2mt)
 {
     mfn_t mfn = pte_get_mfn(pte);
-    p2m_type_t p2m_type = p2m_get_type(pte);
 
     ASSERT(pte_is_valid(pte));
 
@@ -470,10 +559,10 @@ static void p2m_put_page(const pte_t pte, unsigned int level)
     switch ( level )

xen/arch/riscv/p2m.c static void p2m_put_page(const pte_t pte, unsigned int level) · line 567

Quoted 10 lines
xen/arch/riscv/p2m.c +2 -2
     {
     case 1:
-        return p2m_put_2m_superpage(mfn, p2m_type);
+        return p2m_put_2m_superpage(mfn, p2mt);
 
     case 0:
-        return p2m_put_4k_page(mfn, p2m_type);
+        return p2m_put_4k_page(mfn, p2mt);
     }
 }

Might it be better to introduce this function in this shape right away, in the earlier patch?

xen/arch/riscv/p2m.c static int p2m_set_entry(struct p2m_domain *p2m, · line 794

Quoted 5 lines
xen/arch/riscv/p2m.c +1 -0
@@ -690,18 +791,23 @@ static int p2m_set_entry(struct p2m_domain *p2m,
     {
         /* We need to split the original page. */
         pte_t split_pte = *entry;
+        struct page_info *metadata = virt_to_page(table)->v.md.metadata;

This (or along these lines) is how I would have expected things to be done elsewhere as well, limiting the amount of arguments you need to pass around.

Jan

#70 lore raw

Re: [PATCH v3 16/20] xen/riscv: Implement superpage splitting for p2m mappings

In reply to Oleksii Kurochko
Quoted 50 lines · Oleksii Kurochko
Quoted 40 lines · Jan Beulich
Quoted 39 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +33 -0
@@ -539,6 +539,91 @@ static void p2m_free_subtree(struct p2m_domain *p2m,
      p2m_free_page(p2m, pg);
  }
 
+static bool p2m_split_superpage(struct p2m_domain *p2m, pte_t *entry,
+                                unsigned int level, unsigned int target,
+                                const unsigned int *offsets)
+{
+    struct page_info *page;
+    unsigned long i;
+    pte_t pte, *table;
+    bool rv = true;
+
+    /* Convenience aliases */
+    mfn_t mfn = pte_get_mfn(*entry);
+    unsigned int next_level = level - 1;
+    unsigned int level_order = XEN_PT_LEVEL_ORDER(next_level);
+
+    /*
+     * This should only be called with target != level and the entry is
+     * a superpage.
+     */
+    ASSERT(level > target);
+    ASSERT(pte_is_superpage(*entry, level));
+
+    page = p2m_alloc_page(p2m->domain);
+    if ( !page )
+    {
+        /*
+         * The caller is in charge to free the sub-tree.
+         * As we didn't manage to allocate anything, just tell the
+         * caller there is nothing to free by invalidating the PTE.
+         */
+        memset(entry, 0, sizeof(*entry));
+        return false;
+    }
+
Quoted 8 lines

xen/arch/riscv/p2m.c static void p2m_free_subtree(struct p2m_domain *p2m, · line 580

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+    table = __map_domain_page(page);
+
+    /*
+     * We are either splitting a second level 1G page into 512 first level
+     * 2M pages, or a first level 2M page into 512 zero level 4K pages.
+     */

Such a comment is at risk of (silently) going stale when support for 512G mappings is added. I wonder if it's really that informative to have here.

Quoted 3 lines

Good point, I think we could really drop it.
Regarding support for 512G mappings. Is it really make sense to support such big mappings?

I think so, yes (in the longer run). And yes, ...

Quoted 2 lines

It seems like some operations as splitting or sub-entry freeing could be pretty long under some circumstances.

... such will need sorting.

Jan

#79 lore raw

Re: [PATCH v3 19/20] xen/riscv: add support of page lookup by GFN

In reply to Jan Beulich
Quoted 25 lines · Jan Beulich
Quoted 24 lines · Oleksii Kurochko

Introduce helper functions for safely querying the P2M (physical-to-machine) mapping:
- add p2m_read_lock(), p2m_read_unlock(), and p2m_is_locked() for managing P2M lock state.
- Implement p2m_get_entry() to retrieve mapping details for a given GFN, including MFN, page order, and validity.
- Add p2m_lookup() to encapsulate read-locked MFN retrieval.
- Introduce p2m_get_page_from_gfn() to convert a GFN into a page_info pointer, acquiring a reference to the page if valid.
- Introduce get_page().

Implementations are based on Arm's functions with some minor modifications:
- p2m_get_entry():
- Reverse traversal of page tables, as RISC-V uses the opposite level numbering compared to Arm.
- Removed the return of p2m_access_t from p2m_get_entry() since mem_access_settings is not introduced for RISC-V.
- Updated BUILD_BUG_ON() to check using the level 0 mask, which corresponds to Arm's THIRD_MASK.
- Replaced open-coded bit shifts with the BIT() macro.
- Other minor changes, such as using RISC-V-specific functions to validate P2M PTEs, and replacing Arm-specific GUEST_* macros with their RISC-V equivalents.

Quoted 5 lines
Quoted 4 lines

---
Changes in V3:
- Add is_p2m_foreign() macro and connected stuff.

What is this about?

Sorry for that, it is a stale change. I will drop it in the next patch version.

Quoted 6 lines
Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +0 -0
@@ -202,6 +202,24 @@ static inline int p2m_is_write_locked(struct p2m_domain *p2m)
 
  unsigned long construct_hgatp(struct p2m_domain *p2m, uint16_t vmid);
 
Quoted 13 lines

xen/arch/riscv/include/asm/p2m.h static inline int p2m_is_write_locked(struct p2m_domain *p2m) · line 215

Quoted 11 lines
xen/arch/riscv/include/asm/p2m.h +11 -0
+static inline void p2m_read_lock(struct p2m_domain *p2m)
+{
+    read_lock(&p2m->lock);
+}
+
+static inline void p2m_read_unlock(struct p2m_domain *p2m)
+{
+    read_unlock(&p2m->lock);
+}
+
+static inline int p2m_is_locked(struct p2m_domain *p2m)

bool return type (also for p2m_is_write_locked() in patch 11)? Also perhaps pointer-to-const parameter?

I haven't checked what is a argument type of rw_is_locked() inside, so, automatically use just pointer parameter, but now I see that it could be really const.

Quoted 4 lines
Quoted 4 lines
xen/arch/riscv/p2m.c +0 -0
@@ -852,3 +852,139 @@ int map_regions_p2mt(struct domain *d,
  {
Quoted 8 lines

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 859

Quoted 7 lines
xen/arch/riscv/p2m.c +5 -0
      return p2m_insert_mapping(p2m_get_hostp2m(d), gfn, nr, mfn, p2mt);
  }
+
+/*
+ * Get the details of a given gfn.
+ *
+ * If the entry is present, the associated MFN will be returned type filled up.

This sentence doesn't really parse, perhaps due to missing words.

IDK what happened but it should be:
... the associated MFN will returned and type filled up ...
Perhpaps, it would be better just:
... the associated MFN will returned and the p2m type of the mapping. (or just entry's type)

Quoted 15 lines
Quoted 15 lines
xen/arch/riscv/p2m.c +15 -0
+ * The page_order will correspond to the order of the mapping in the page
+ * table (i.e it could be a superpage).
+ *
+ * If the entry is not present, INVALID_MFN will be returned and the
+ * page_order will be set according to the order of the invalid range.
+ *
+ * valid will contain the value of bit[0] (e.g valid bit) of the
+ * entry.
+ */
+static mfn_t p2m_get_entry(struct p2m_domain *p2m, gfn_t gfn,
+                           p2m_type_t *t,
+                           unsigned int *page_order,
+                           bool *valid)
+{
+    unsigned int level = 0;
Quoted 8 lines

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 881

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+    pte_t entry, *table;
+    int rc;
+    mfn_t mfn = INVALID_MFN;
+    DECLARE_OFFSETS(offsets, gfn_to_gaddr(gfn));
+
+    ASSERT(p2m_is_locked(p2m));
+    BUILD_BUG_ON(XEN_PT_LEVEL_MAP_MASK(0) != PAGE_MASK);

What function-wide property is this check about? Even when moved ...

I think this check isn't needed anymore.

This check is/was needed to be sure that 4k page(s) are used on L3 (in Arm terms) mapping as Arm can support 4k, 16k and 64k.
Initially this check derived from:
https://lore.kernel.org/xen-devel/[email protected]/
And it was needed because of the way how maddr is calculated, calculation for which could be wrong if page size isn't 4k.
But then this check was migrated to p2m_get_entry():
https://lore.kernel.org/xen-devel/[email protected]/
But the way how maddr is got isn't depends on mask and PAGE_MASK, and I don't see any other reason to why BUILD_BUG_ON() is needed now.

Quoted 39 lines

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 886

Quoted 5 lines
xen/arch/riscv/p2m.c +4 -0
+    if ( valid )
+        *valid = false;
+
+    /* XXX: Check if the mapping is lower than the mapped gfn */

(Nested: What is this about?)

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 892

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+    /* This gfn is higher than the highest the p2m map currently holds */
+    if ( gfn_x(gfn) > gfn_x(p2m->max_mapped_gfn) )
+    {
+        for ( level = P2M_ROOT_LEVEL; level; level-- )
+            if ( (gfn_x(gfn) & (XEN_PT_LEVEL_MASK(level) >> PAGE_SHIFT)) >

... into the more narrow scope where another XEN_PT_LEVEL_MASK() exists I can't really spot what the check is to guard against.

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 904

Quoted 12 lines
xen/arch/riscv/p2m.c +12 -0
+                 gfn_x(p2m->max_mapped_gfn) )
+                break;
+
+        goto out;
+    }
+
+    table = p2m_get_root_pointer(p2m, gfn);
+
+    /*
+     * the table should always be non-NULL because the gfn is below
+     * p2m->max_mapped_gfn and the root table pages are always present.
+     */

Nit: Style.

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 914

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    if ( !table )
+    {
+        ASSERT_UNREACHABLE();
+        level = P2M_ROOT_LEVEL;
+        goto out;
+    }
+
+    for ( level = P2M_ROOT_LEVEL; level; level-- )
+    {
+        rc = p2m_next_level(p2m, true, level, &table, offsets[level]);
Quoted 3 lines

Why would you blindly allocate a page table (hierarchy) here? If anything, this may need doing upon caller request (as it's only up the call chain where the necessary knowledge exists).

I wanted to set it to always|false|, as based on the name|p2m_get_entry()|, it is expected that the page tables are already allocated.

Quoted 10 lines

For example, ...

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 956

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+static mfn_t p2m_lookup(struct p2m_domain *p2m, gfn_t gfn, p2m_type_t *t)
+{
+    mfn_t mfn;
+
+    p2m_read_lock(p2m);
+    mfn = p2m_get_entry(p2m, gfn, t, NULL, NULL);

... this (by its name) pretty likely won't want allocation, while ...

Quoted 9 lines

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 964

Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+    p2m_read_unlock(p2m);
+
+    return mfn;
+}
+
+struct page_info *p2m_get_page_from_gfn(struct p2m_domain *p2m, gfn_t gfn,
+                                        p2m_type_t *t)
+{

... this will. Yet then ...

I didn't really get why p2m_get_page_from_gfn() is expected to allocate page table. My understanding is that GFN will point to a page only if a mapping was done before for the GFN.

Quoted 5 lines

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 967

Quoted 4 lines
xen/arch/riscv/p2m.c +3 -0
+    struct page_info *page;
+    p2m_type_t p2mt = p2m_invalid;
+    mfn_t mfn = p2m_lookup(p2m, gfn, t);

... you use the earlier one here.

We don't need|page_order| and/or the valid bit in|p2m_get_page_from_gfn()|.

Quoted 13 lines
Quoted 13 lines
xen/arch/riscv/p2m.c +12 -0
+    if ( !mfn_valid(mfn) )
+        return NULL;
+
+    if ( t )
+        p2mt = *t;
+
+    page = mfn_to_page(mfn);
+
+    /*
+     * get_page won't work on foreign mapping because the page doesn't
+     * belong to the current domain.
+     */
Quoted 8 lines

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 986

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+    if ( p2m_is_foreign(p2mt) )
+    {
+        struct domain *fdom = page_get_owner_and_reference(page);
+        ASSERT(fdom != NULL);
+        ASSERT(fdom != p2m->domain);
+        return page;

In a release build (with no assertions) this will be wrong if either of the two condition would not be satisfied. See x86'es respective code.

I will add the following then instead:

    if ( unlikely(p2m_is_foreign(t)) )
    {
        const struct domain *fdom = page_get_owner_and_reference(page);

        if ( fdom )
        {
            if ( likely(fdom != d) )
                return page;
            ASSERT_UNREACHABLE();
            put_page(page);
        }

        return NULL;
    }

I'm not sure that unlikely() is needed, x86 has it. It seems then Arm needs such a change too.

Thanks.

~ Oleksii

#83 lore raw

Re: [PATCH v3 20/20] xen/riscv: introduce metadata table to store P2M type

In reply to Jan Beulich
Quoted 15 lines · Jan Beulich
Quoted 14 lines · Oleksii Kurochko

RISC-V's PTE has only two available bits that can be used to store the P2M type. This is insufficient to represent all the current RISC-V P2M types. Therefore, some P2M types must be stored outside the PTE bits.

To address this, a metadata table is introduced to store P2M types that cannot fit in the PTE itself. Not all P2M types are stored in the metadata table—only those that require it.

The metadata table is linked to the intermediate page table via the struct page_info's list field of the corresponding intermediate page.

To simplify the allocation and linking of intermediate and metadata page tables, p2m_{alloc,free}_table() functions are implemented.

Quoted 8 lines
Quoted 4 lines

These changes impact p2m_split_superpage(), since when a superpage is split, it is necessary to update the metadata table of the new intermediate page table — if the entry being split has its P2M type set to p2m_ext_storage in its P2M_TYPES bits.

Oh, this was an aspect I didn't realize when commenting on the name of the enumerator. I think you want to keep the name for the purpose here, but you better wouldn't apply relational operators to it (and hence have a second value to serve that purpose).

It could be done in this way, but I think that it would be better just to have one value with a better name as I suggested in the reply to other patch.

Quoted 10 lines
Quoted 9 lines

In addition to updating
the metadata of the new intermediate page table, the corresponding entry in the metadata for the original superpage is invalidated.

Also, update p2m_{get,set}_type to work with P2M types which don't fit into PTE bits.

No Suggested-by: or anything?

Sorry for that, Suggested-by should be added here, I'll fix that in the next patch series version.

Quoted 13 lines

xen/arch/riscv/include/asm/mm.h struct page_info · line 154

Quoted 9 lines
xen/arch/riscv/include/asm/mm.h +2 -0
@@ -150,6 +150,15 @@ struct page_info
              /* Order-size of the free chunk this page is the head of. */
              unsigned int order;
          } free;
+
+        /* Page is used to store metadata: p2m type. */

That's not correct. The page thus described is what the pointer below points to. Here it's more like "Page is used as an intermediate P2M page table".

Quoted 8 lines

xen/arch/riscv/include/asm/mm.h struct page_info · line 161

Quoted 7 lines
xen/arch/riscv/include/asm/mm.h +7 -0
+        struct {
+            /*
+             * Pointer to a page which store metadata for an intermediate page
+             * table.
+             */
+            struct page_info *metadata;
+        } md;

In the description you say you would re-use the list field.

It was so in a first version of storing P2M type outside PTE bits, so, it is a stale part of the commit message. I'll correct it.

Quoted 25 lines
Quoted 25 lines
xen/arch/riscv/p2m.c +10 -1
@@ -101,7 +101,16 @@ static int p2m_alloc_root_table(struct p2m_domain *p2m)
  {
      struct domain *d = p2m->domain;
      struct page_info *page;
-    const unsigned int nr_root_pages = P2M_ROOT_PAGES;
+    /*
+     * If the root page table starts at Level <= 2, and since only 1GB, 2MB,
+     * and 4KB mappings are supported (as enforced by the ASSERT() in
+     * p2m_set_entry()), it is necessary to allocate P2M_ROOT_PAGES for
+     * the root page table itself, plus an additional P2M_ROOT_PAGES for
+     * metadata storage. This is because only two free bits are available in
+     * the PTE, which are not sufficient to represent all possible P2M types.
+     */
+    const unsigned int nr_root_pages = P2M_ROOT_PAGES *
+                                       ((P2M_ROOT_LEVEL <= 2) ? 2 : 1);
 
      /*
       * Return back nr_root_pages to assure the root table memory is also
@@ -114,6 +123,23 @@ static int p2m_alloc_root_table(struct p2m_domain *p2m)
      if ( !page )
          return -ENOMEM;
 
Quoted 16 lines
Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+    if ( P2M_ROOT_LEVEL <= 2 )
+    {
+        /*
+         * In the case where P2M_ROOT_LEVEL <= 2, it is necessary to allocate
+         * a page of the same size as that used for the root page table.

xen/arch/riscv/p2m.c static int p2m_alloc_root_table(struct p2m_domain *p2m) · line 140

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+         * Therefore, p2m_allocate_root() can be safely reused.
+         */
+        struct page_info *metadata = p2m_allocate_root(d);
+        if ( !metadata )
+        {
+            free_domheap_pages(page, P2M_ROOT_ORDER);
+            return -ENOMEM;
+        }
+
+        page->v.md.metadata = metadata;

Don't you need to install such a link for every one of the 4 pages?

Yes, I need to do that. Thanks.

Quoted 5 lines
Quoted 5 lines
xen/arch/riscv/p2m.c +0 -0
@@ -198,24 +224,25 @@ static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
      return __map_domain_page(p2m->root + root_table_indx);
  }
 
Quoted 12 lines

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 233

Quoted 11 lines
xen/arch/riscv/p2m.c +5 -4
-static int p2m_set_type(pte_t *pte, p2m_type_t t)
+static void p2m_set_type(pte_t *pte, const p2m_type_t t, const unsigned int i)
  {
-    int rc = 0;
-
      if ( t > p2m_ext_storage )
-        panic("unimplemeted\n");
+    {
+        ASSERT(pte);
+
+        pte[i].pte = t;

What does i identify here?

An index in metadata page where P2M type for corresponding PTE is stored. I will re-name it to metadata_indx for more clarity.

Quoted 14 lines
Quoted 14 lines
xen/arch/riscv/p2m.c +3 -3
+    }
      else
          pte->pte |= MASK_INSR(t, P2M_TYPE_PTE_BITS_MASK);
-
-    return rc;
  }
 
-static p2m_type_t p2m_get_type(const pte_t pte)
+static p2m_type_t p2m_get_type(const pte_t pte, const pte_t *metadata,
+                               const unsigned int i)
  {
      p2m_type_t type = MASK_EXTR(pte.pte, P2M_TYPE_PTE_BITS_MASK);
 
Quoted 8 lines

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 248

Quoted 6 lines
xen/arch/riscv/p2m.c +1 -1
      if ( type == p2m_ext_storage )
-        panic("unimplemented\n");
+        type = metadata[i].pte;
 
      return type;
  }

Overall this feels pretty fragile, as the caller has to pass several values which all need to be in sync with one another. If you ...

Generally, agree it is fragile enough.

Quoted 33 lines
Quoted 14 lines
xen/arch/riscv/p2m.c +4 -1
@@ -265,7 +292,10 @@ static void p2m_set_permission(pte_t *e, p2m_type_t t)
      }
  }
 
-static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
+static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t,
+                              struct page_info *metadata_pg,
+                              const unsigned int indx,
+                              bool is_table)
  {
      pte_t e = (pte_t) { PTE_VALID };
 

xen/arch/riscv/p2m.c static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table) · line 318

Quoted 4 lines
xen/arch/riscv/p2m.c +1 -0
@@ -285,12 +315,21 @@ static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table)
 
      if ( !is_table )
      {
+        pte_t *metadata = __map_domain_page(metadata_pg);

... map the page anyway, no matter whether ...

xen/arch/riscv/p2m.c static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t, bool is_table) · line 330

Quoted 13 lines
xen/arch/riscv/p2m.c +7 -2
          p2m_set_permission(&e, t);
 
+        metadata[indx].pte = p2m_invalid;
+
          if ( t < p2m_ext_storage )
-            p2m_set_type(&e, t);
+            p2m_set_type(&e, t, indx);
          else
-            panic("unimplemeted\n");
+        {
+            e.pte |= MASK_INSR(p2m_ext_storage, P2M_TYPE_PTE_BITS_MASK);
+            p2m_set_type(metadata, t, indx);
+        }
Quoted 1 line

... you'll actually use it, maybe best to map both pages at the same point?

Only one page is mapped here (?) and it should be mapped here, I suppose, it could be a case when a previous set type is overwritten, so, it could be needed to invalidate a type written in metadata.

Quoted 2 lines

And as said elsewhere, no, I don't think you want to use p2m_set_type() for two entirely different purposes.

I wasn't very happy too, but, at the same time I didn't want to have a prototype where it isn't really clear when it is needed to pass metadata and where it is not. But considering your comments then this one solution isn't good too. So maybe it would be better just have two separate functions: p2m_set_pte_type() and p2m_set_metadata_type().

Quoted 41 lines

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 374

Quoted 13 lines
xen/arch/riscv/p2m.c +8 -0
@@ -323,22 +364,71 @@ static struct page_info *p2m_alloc_page(struct p2m_domain *p2m)
      return pg;
  }
 
+static void p2m_free_page(struct p2m_domain *p2m, struct page_info *pg);
+
+/*
+ * Allocate a page table with an additional extra page to store
+ * metadata for each entry of the page table.
+ * Link this metadata page to page table page's list field.
+ */
+static struct page_info * p2m_alloc_table(struct p2m_domain *p2m)

Nit: Stray blank after * again.

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 378

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+{
+    enum table_type
+    {
+        INTERMEDIATE_TABLE=0,

If you really think you need the "= 0", then please with blanks around '='.

Quoted 20 lines
xen/arch/riscv/p2m.c +20 -0
+        /*
+         * At the moment, metadata is going to store P2M type
+         * for each PTE of page table.
+         */
+        METADATA_TABLE,
+        TABLE_MAX
+    };
+
+    struct page_info *tables[TABLE_MAX];
+
+    for ( unsigned int i = 0; i < TABLE_MAX; i++ )
+    {
+        tables[i] = p2m_alloc_page(p2m);
+
+        if ( !tables[i] )
+            goto out;
+
+        clear_and_clean_page(tables[i]);
+    }
+
Quoted 8 lines

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 405

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+    tables[INTERMEDIATE_TABLE]->v.md.metadata = tables[METADATA_TABLE];
+
+    return tables[INTERMEDIATE_TABLE];
+
+ out:
+    for ( unsigned int i = 0; i < TABLE_MAX; i++ )
+        if ( tables[i] )

You didn't clear all of tables[] first, though.

Oh, right, i missed an initalizer for tables[] array.

Quoted 8 lines

This kind of cleanup is
often better done as

     while ( i-- > 0 )
         ...

You don't even need an if() then, as you know allocations succeeded for all earlier array slots.

Yes, it looks very nice.

Quoted 9 lines

xen/arch/riscv/p2m.c static struct page_info *p2m_alloc_page(struct p2m_domain *p2m) · line 409

Quoted 5 lines
xen/arch/riscv/p2m.c +4 -0
+            p2m_free_page(p2m, tables[i]);
+
+    return NULL;
+}

I'm also surprised you allocate the metadata table no matter whether you'll actually need it. That'll double your average paging pool usage, when in a typical case only very few entries would actually require this extra storage.

Nice point, we could really do a delayed allocation instead and allocate only when requested P2M type is > p2m_ext_storage.
I'll implement that.

Quoted 20 lines
Quoted 20 lines
xen/arch/riscv/p2m.c +2 -3
@@ -453,10 +543,9 @@ static void p2m_put_2m_superpage(mfn_t mfn, p2m_type_t type)
  }
 
  /* Put any references on the page referenced by pte. */
-static void p2m_put_page(const pte_t pte, unsigned int level)
+static void p2m_put_page(const pte_t pte, unsigned int level, p2m_type_t p2mt)
  {
      mfn_t mfn = pte_get_mfn(pte);
-    p2m_type_t p2m_type = p2m_get_type(pte);
 
      ASSERT(pte_is_valid(pte));
 
@@ -470,10 +559,10 @@ static void p2m_put_page(const pte_t pte, unsigned int level)
      switch ( level )
      {
      case 1:
-        return p2m_put_2m_superpage(mfn, p2m_type);
+        return p2m_put_2m_superpage(mfn, p2mt);
 
Quoted 7 lines

xen/arch/riscv/p2m.c static void p2m_put_page(const pte_t pte, unsigned int level) · line 567

Quoted 5 lines
xen/arch/riscv/p2m.c +1 -1
      case 0:
-        return p2m_put_4k_page(mfn, p2m_type);
+        return p2m_put_4k_page(mfn, p2mt);
      }
  }

Might it be better to introduce this function in this shape right away, in the earlier patch?

Agree, probably, I did that intentionally, but I don't remember why. I will try to avoid these changes in this patch as it looks unnecessary here.

Quoted 9 lines

xen/arch/riscv/p2m.c static int p2m_set_entry(struct p2m_domain *p2m, · line 794

Quoted 6 lines
xen/arch/riscv/p2m.c +1 -0
@@ -690,18 +791,23 @@ static int p2m_set_entry(struct p2m_domain *p2m,
      {
          /* We need to split the original page. */
          pte_t split_pte = *entry;
+        struct page_info *metadata = virt_to_page(table)->v.md.metadata;

This (or along these lines) is how I would have expected things to be done elsewhere as well, limiting the amount of arguments you need to pass around.

I will try to re-use this approach elsewhere I can.

Thanks.

~ Oleksii

#58 lore raw

Re: [PATCH v3 13/20] xen/riscv: Implement p2m_free_subtree() and related helpers

In reply to Jan Beulich
Quoted 37 lines · Jan Beulich
Quoted 24 lines · Oleksii Kurochko
xen/arch/riscv/include/asm/p2m.h +10 -0
@@ -79,10 +79,20 @@ typedef enum {
      p2m_ext_storage,    /* Following types'll be stored outsude PTE bits: */
      p2m_grant_map_rw,   /* Read/write grant mapping */
      p2m_grant_map_ro,   /* Read-only grant mapping */
+    p2m_map_foreign_rw, /* Read/write RAM pages from foreign domain */
+    p2m_map_foreign_ro, /* Read-only RAM pages from foreign domain */
  } p2m_type_t;
 
  #define p2m_mmio_direct p2m_mmio_direct_io
 
+/*
+ * Bits 8 and 9 are reserved for use by supervisor software;
+ * the implementation shall ignore this field.
+ * We are going to use to save in these bits frequently used types to avoid
+ * get/set of a type from radix tree.
+ */
+#define P2M_TYPE_PTE_BITS_MASK  0x300
+
  /* We use bitmaps and mask to handle groups of types */
  #define p2m_to_mask(t_) BIT(t_, UL)
 

xen/arch/riscv/include/asm/p2m.h typedef enum { · line 106

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +1 -0
@@ -93,10 +103,16 @@ typedef enum {
  #define P2M_GRANT_TYPES (p2m_to_mask(p2m_grant_map_rw) | \
                           p2m_to_mask(p2m_grant_map_ro))
 
+                            /* Foreign mappings types */

Nit: Why so far to the right?

Quoted 6 lines
xen/arch/riscv/p2m.c +0 -0
@@ -197,6 +197,16 @@ static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
      return __map_domain_page(p2m->root + root_table_indx);
  }
 
Quoted 8 lines

xen/arch/riscv/p2m.c static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn) · line 205

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+static p2m_type_t p2m_get_type(const pte_t pte)
+{
+    p2m_type_t type = MASK_EXTR(pte.pte, P2M_TYPE_PTE_BITS_MASK);
+
+    if ( type == p2m_ext_storage )
+        panic("unimplemented\n");

That is, as per p2m.h additions you pretend to add support for foreign types here, but then you don't?

I count foreign types as p2m_ext_storage type, so a support for them will be added in the patch
[1] of this patch series as a type for p2m_ext_storage type will stored in metadata due to the lack of free bits in PTE.

[1]https://lore.kernel.org/xen-devel/[email protected]/T/#mcc1a0367fdbfbf3ca073f152efa799c1a4354974

Quoted 4 lines
Quoted 4 lines
xen/arch/riscv/p2m.c +0 -0
@@ -248,11 +258,136 @@ static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl,
      return P2M_TABLE_MAP_NONE;
  }
 
Quoted 12 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 269

Quoted 9 lines
xen/arch/riscv/p2m.c +9 -0
+static void p2m_put_foreign_page(struct page_info *pg)
+{
+    /*
+     * It’s safe to call put_page() here because arch_flush_tlb_mask()
+     * will be invoked if the page is reallocated before the end of
+     * this loop, which will trigger a flush of the guest TLBs.
+     */
+    put_page(pg);
+}

How can one know the comment is true? arch_flush_tlb_mask() still lives in stubs.c, and hence what it is eventually going to do (something like Arm's vs more like x86'es) is entirely unknown right now.

I'll introduce arch_flush_tlb_mask() in this patch in the next version.

Quoted 12 lines
Quoted 12 lines
xen/arch/riscv/p2m.c +12 -0
+/* Put any references on the single 4K page referenced by mfn. */
+static void p2m_put_4k_page(mfn_t mfn, p2m_type_t type)
+{
+    /* TODO: Handle other p2m types */
+
+    if ( p2m_is_foreign(type) )
+    {
+        ASSERT(mfn_valid(mfn));
+        p2m_put_foreign_page(mfn_to_page(mfn));
+    }
+
+    /*
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 289

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+     * Detect the xenheap page and mark the stored GFN as invalid.
+     * We don't free the underlying page until the guest requested to do so.
+     * So we only need to tell the page is not mapped anymore in the P2M by
+     * marking the stored GFN as invalid.
+     */
+    if ( p2m_is_ram(type) && is_xen_heap_mfn(mfn) )
+        page_set_xenheap_gfn(mfn_to_page(mfn), INVALID_GFN);

Isn't this for grants? p2m_is_ram() doesn't cover p2m_grant_map_*.

p2m_is_ram() looks really unnecessary here. I'm thinking if it could be useful to store for RAM types GFNs too to have something like M2P.

Quoted 8 lines
Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+}
+
+/* Put any references on the superpage referenced by mfn. */
+static void p2m_put_2m_superpage(mfn_t mfn, p2m_type_t type)
+{
+    struct page_info *pg;
+    unsigned int i;
+
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 304

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+    ASSERT(mfn_valid(mfn));
+
+    pg = mfn_to_page(mfn);
+
+    for ( i = 0; i < XEN_PT_ENTRIES; i++, pg++ )
+        p2m_put_foreign_page(pg);
+}

In p2m_put_4k_page() you check the type, whereas here you don't.

Missed to add that:

      if ( !p2m_is_foreign(type) )
        return;
Quoted 16 lines
Quoted 16 lines
xen/arch/riscv/p2m.c +16 -0
+/* Put any references on the page referenced by pte. */
+static void p2m_put_page(const pte_t pte, unsigned int level)
+{
+    mfn_t mfn = pte_get_mfn(pte);
+    p2m_type_t p2m_type = p2m_get_type(pte);
+
+    ASSERT(pte_is_valid(pte));
+
+    /*
+     * TODO: Currently we don't handle level 2 super-page, Xen is not
+     * preemptible and therefore some work is needed to handle such
+     * superpages, for which at some point Xen might end up freeing memory
+     * and therefore for such a big mapping it could end up in a very long
+     * operation.
+     */
+    switch ( level )
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 328

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+    {
+    case 1:
+        return p2m_put_2m_superpage(mfn, p2m_type);
+
+    case 0:
+        return p2m_put_4k_page(mfn, p2m_type);
+    }

Yet despite the comment not even an assertion for level 2 and up?

Not sure that an ASSERT() is needed here as a reference(s) for such page(s) will be put during domain_relinquish_resources() as there we could do preemption. Something like Arm does here:
https://gitlab.com/xen-project/people/olkur/xen/-/blob/staging/xen/arch/arm/mmu/p2m.c?ref_type=heads#L1587

I'm thinking that probably it makes sense to put only 4k page(s) and all other cases postpone until domain_relinquish_resources() is called.

Quoted 32 lines
Quoted 5 lines
xen/arch/riscv/p2m.c +0 -1
  /* Free pte sub-tree behind an entry */
  static void p2m_free_subtree(struct p2m_domain *p2m,
                               pte_t entry, unsigned int level)
  {
-    panic("%s: hasn't been implemented yet\n", __func__);

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 351

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    unsigned int i;
+    pte_t *table;
+    mfn_t mfn;
+    struct page_info *pg;
+
+    /* Nothing to do if the entry is invalid. */
+    if ( !pte_is_valid(entry) )
+        return;
+
+    if ( pte_is_superpage(entry, level) || (level == 0) )

Perhaps swap the two conditions around?

Quoted 15 lines
xen/arch/riscv/p2m.c +15 -0
+    {
+#ifdef CONFIG_IOREQ_SERVER
+        /*
+         * If this gets called then either the entry was replaced by an entry
+         * with a different base (valid case) or the shattering of a superpage
+         * has failed (error case).
+         * So, at worst, the spurious mapcache invalidation might be sent.
+         */
+        if ( p2m_is_ram(p2m_get_type(p2m, entry)) &&
+             domain_has_ioreq_server(p2m->domain) )
+            ioreq_request_mapcache_invalidate(p2m->domain);
+#endif
+
+        p2m_put_page(entry, level);
+
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 372

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+        return;
+    }
+
+    table = map_domain_page(pte_get_mfn(entry));
+    for ( i = 0; i < XEN_PT_ENTRIES; i++ )
+        p2m_free_subtree(p2m, table[i], level - 1);

In p2m_put_page() you comment towards concerns for level >= 2; no similar concerns for the resulting recursion here?

This function is generic enough to handle any level.

Except that it is possible that it will be needed, for example, to split 1G mapping into something smaller then p2m_free_subtree() could be called for freeing a subtree of 1gb mapping.

Quoted 12 lines
Quoted 12 lines
xen/arch/riscv/p2m.c +12 -0
+    unmap_domain_page(table);
+
+    /*
+     * Make sure all the references in the TLB have been removed before
+     * freing the intermediate page table.
+     * XXX: Should we defer the free of the page table to avoid the
+     * flush?
+     */
+    p2m_tlb_flush_sync(p2m);
+
+    mfn = pte_get_mfn(entry);
+    ASSERT(mfn_valid(mfn));
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 390

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+
+    pg = mfn_to_page(mfn);
+
+    page_list_del(pg, &p2m->pages);
+    p2m_free_page(p2m, pg);

Once again I wonder whether this code path was actually tested: p2m_free_page() also invokes page_list_del(), and double deletions typically won't end very well.

Agree, it should be dropped here and left only in p2m_free_page().

It should be tested, I have a test case where I'm chaning MFN so this one should be called:
+ /*

+     * Free the entry only if the original pte was valid and the base
+     * is different (to avoid freeing when permission is changed).
+     */

+ if ( pte_is_valid(orig_pte) &&
+ !mfn_eq(pte_get_mfn(*entry), pte_get_mfn(orig_pte)) )
+ p2m_free_subtree(p2m, orig_pte, level);

I will double check.

But I think I was lucky because I've tested only the whole patch series and in one of a further patches page_list_del(pg, &p2m->pages) is dropped.

~ Oleksii

#59 lore raw

Re: [PATCH v3 13/20] xen/riscv: Implement p2m_free_subtree() and related helpers

Quoted 27 lines · Oleksii Kurochko
Quoted 17 lines · Jan Beulich
Quoted 16 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +16 -0
+/* Put any references on the page referenced by pte. */
+static void p2m_put_page(const pte_t pte, unsigned int level)
+{
+    mfn_t mfn = pte_get_mfn(pte);
+    p2m_type_t p2m_type = p2m_get_type(pte);
+
+    ASSERT(pte_is_valid(pte));
+
+    /*
+     * TODO: Currently we don't handle level 2 super-page, Xen is not
+     * preemptible and therefore some work is needed to handle such
+     * superpages, for which at some point Xen might end up freeing memory
+     * and therefore for such a big mapping it could end up in a very long
+     * operation.
+     */
+    switch ( level )
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 328

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+    {
+    case 1:
+        return p2m_put_2m_superpage(mfn, p2m_type);
+
+    case 0:
+        return p2m_put_4k_page(mfn, p2m_type);
+    }

Yet despite the comment not even an assertion for level 2 and up?

Quoted 7 lines

Not sure that an ASSERT() is needed here as a reference(s) for such page(s) will be put during domain_relinquish_resources() as there we could do preemption. Something like Arm does here:

   https://gitlab.com/xen-project/people/olkur/xen/-/blob/staging/xen/arch/arm/mmu/p2m.c?ref_type=heads#L1587

I'm thinking that probably it makes sense to put only 4k page(s) and all other cases postpone until domain_relinquish_resources() is called.

How can you defer to domain cleanup? How would handling of foreign mappings (or e.g. ballooning? not sure) work when you don't drop references as necessary?

Quoted 41 lines
Quoted 32 lines
Quoted 5 lines

/* Free pte sub-tree behind an entry */
static void p2m_free_subtree(struct p2m_domain *p2m,
pte_t entry, unsigned int level)
{

xen/arch/riscv/p2m.c +0 -1
-    panic("%s: hasn't been implemented yet\n", __func__);

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 351

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    unsigned int i;
+    pte_t *table;
+    mfn_t mfn;
+    struct page_info *pg;
+
+    /* Nothing to do if the entry is invalid. */
+    if ( !pte_is_valid(entry) )
+        return;
+
+    if ( pte_is_superpage(entry, level) || (level == 0) )

Perhaps swap the two conditions around?

Quoted 15 lines
xen/arch/riscv/p2m.c +15 -0
+    {
+#ifdef CONFIG_IOREQ_SERVER
+        /*
+         * If this gets called then either the entry was replaced by an entry
+         * with a different base (valid case) or the shattering of a superpage
+         * has failed (error case).
+         * So, at worst, the spurious mapcache invalidation might be sent.
+         */
+        if ( p2m_is_ram(p2m_get_type(p2m, entry)) &&
+             domain_has_ioreq_server(p2m->domain) )
+            ioreq_request_mapcache_invalidate(p2m->domain);
+#endif
+
+        p2m_put_page(entry, level);
+
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 372

Quoted 6 lines
xen/arch/riscv/p2m.c +6 -0
+        return;
+    }
+
+    table = map_domain_page(pte_get_mfn(entry));
+    for ( i = 0; i < XEN_PT_ENTRIES; i++ )
+        p2m_free_subtree(p2m, table[i], level - 1);

In p2m_put_page() you comment towards concerns for level >= 2; no similar concerns for the resulting recursion here?

Quoted 5 lines

This function is generic enough to handle any level.

Except that it is possible that it will be needed, for example, to split 1G mapping into something smaller then p2m_free_subtree() could be called for freeing a subtree of 1gb mapping.

The question wasn't about it being generic enough, but it possibly taking too much time for level >= 2.

Jan

#53 lore raw

Re: [PATCH v3 12/20] xen/riscv: implement p2m_set_range()

In reply to Jan Beulich
Quoted 13 lines · Jan Beulich
Quoted 1 line · Oleksii Kurochko

This patch introduces p2m_set_range() and its core helper p2m_set_entry() for

Nit: This patch doesn't introduce p2m_set_range(); it merely fleshes it out.

Quoted 9 lines
xen/arch/riscv/include/asm/p2m.h +1 -0
@@ -7,11 +7,13 @@
  #include <xen/rwlock.h>
  #include <xen/types.h>
 
+#include <asm/page.h>
  #include <asm/page-bits.h>
 
Quoted 9 lines

xen/arch/riscv/include/asm/p2m.h line 16

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +1 -0
  extern unsigned int p2m_root_order;
  #define P2M_ROOT_ORDER  p2m_root_order
  #define P2M_ROOT_PAGES  BIT(P2M_ROOT_ORDER, U)
+#define P2M_ROOT_LEVEL  HYP_PT_ROOT_LEVEL

I think I commented on this before, and I would have hoped for at least a remark in the description to appear (perhaps even a comment here): It's okay(ish) to tie these together for now, but in the longer run I don't expect this is going to be wanted. If e.g. we ran Xen in Sv57 mode, there would be no reason at all to force all P2Ms to use 5 levels of page tables.

Do you mean that for G-stage it could be chosen any SvXX mode to limit an amount of page tables necessary for G-stage? If yes, then, at least, I agree that a comment should be added or, probably, "#warning optimize an amount of p2m root level for MMU mode > Sv48" (or maybe >=).

Or do you mean if we set hgatp.mode=Sv57 then it is possible to limit an amount of page table's levels to use? In this case I think hardware still will expect to see 5 levels of page tables.

Quoted 15 lines
Quoted 15 lines
xen/arch/riscv/include/asm/p2m.h +11 -0
@@ -175,13 +179,257 @@ int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted)
      return 0;
  }
 
+/*
+ * Find and map the root page table. The caller is responsible for
+ * unmapping the table.
+ *
+ * The function will return NULL if the offset into the root table is
+ * invalid.
+ */
+static pte_t *p2m_get_root_pointer(struct p2m_domain *p2m, gfn_t gfn)
+{
+    unsigned long root_table_indx;
+
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 193

Quoted 1 line
xen/arch/riscv/include/asm/p2m.h +1 -0
+    root_table_indx = gfn_x(gfn) >> XEN_PT_LEVEL_ORDER(P2M_ROOT_LEVEL);

Right now page table layouts / arrangements are indeed similar enough to share accessor constructs. Nevertheless I find it problematic (doc-wise at the very least) that a Xen page table construct is used to access a P2M page table. If and when these needed to be decoupled, it would likely help of the distinction was already made, by - for now - simply introducing aliases (here e.g. P2M_LEVEL_ORDER(), expanding to XEN_PT_LEVEL_ORDER() for the time being).

I think it's better to define this correctly now, as I initially missed that only non-root page tables and all page table entries (PTEs) share the same format as their corresponding Sv39, Sv48, or Sv57 modes (i.e., corresponding to SvXXx4).

However, in this case, we're dealing with the*root level*, which is extended by 2 extra bits. Therefore, using|XEN_PT_LEVEL_ORDER()| would be incorrect if those two extra bits are actually used.

We're just fortunate that no one currently uses these extra 2 bits.

Quoted 6 lines
Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +6 -0
+    if ( root_table_indx >= P2M_ROOT_PAGES )
+        return NULL;
+
+    return __map_domain_page(p2m->root + root_table_indx);
+}
+
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 204

Quoted 5 lines
xen/arch/riscv/include/asm/p2m.h +5 -0
+static inline void p2m_write_pte(pte_t *p, pte_t pte, bool clean_pte)
+{
+    write_pte(p, pte);
+    if ( clean_pte )
+        clean_dcache_va_range(p, sizeof(*p));

Not necessarily for right away, but if multiple adjacent PTEs are written without releasing the lock, this then redundant cache flushing can be a performance issue.

Can't it be resolved on a caller side? Something like:
p2m_write_pte(p1, pte1, false); p2m_write_pte(p2, pte2, false); p2m_write_pte(p3, pte3, false); p2m_write_pte(p4, pte4, true);
where p1-p4 are adjacent.

Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 211

Quoted 7 lines
xen/arch/riscv/include/asm/p2m.h +7 -0
+}
+
+static inline void p2m_clean_pte(pte_t *p, bool clean_pte)
+{
+    pte_t pte;
+
+    memset(&pte, 0, sizeof(pte));

Why memset()? Why not simply give the variable an appropriate initializer?

Good point. It would be much better just to use an appropriate initializer.

Quoted 5 lines

Or use ...

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 212

Quoted 1 line
xen/arch/riscv/include/asm/p2m.h +1 -0
+    p2m_write_pte(p, pte, clean_pte);

... a compound literal here, like you do ...

Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 219

Quoted 7 lines
xen/arch/riscv/include/asm/p2m.h +7 -0
+}
+
+static pte_t p2m_pte_from_mfn(mfn_t mfn, p2m_type_t t)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+
+    return (pte_t) { .pte = 0 };

... here? (Just {} would also do, if I'm not mistaken.)

According to C99 it will be enough {}, but {.pte = 0} is more obvious and clearer, IMO.

Quoted 50 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 229

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+}
+
+#define P2M_TABLE_MAP_NONE 0
+#define P2M_TABLE_MAP_NOMEM 1
+#define P2M_TABLE_SUPER_PAGE 2
+#define P2M_TABLE_NORMAL 3
+
+/*
+ * Take the currently mapped table, find the corresponding the entry
+ * corresponding to the GFN, and map the next table, if available.

Nit: Double "corresponding".

Quoted 38 lines
xen/arch/riscv/include/asm/p2m.h +38 -0
+ * The previous table will be unmapped if the next level was mapped
+ * (e.g P2M_TABLE_NORMAL returned).
+ *
+ * `alloc_tbl` parameter indicates whether intermediate tables should
+ * be allocated when not present.
+ *
+ * Return values:
+ *  P2M_TABLE_MAP_NONE: a table allocation isn't permitted.
+ *  P2M_TABLE_MAP_NOMEM: allocating a new page failed.
+ *  P2M_TABLE_SUPER_PAGE: next level or leaf mapped normally.
+ *  P2M_TABLE_NORMAL: The next entry points to a superpage.
+ */
+static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl,
+                          unsigned int level, pte_t **table,
+                          unsigned int offset)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+
+    return P2M_TABLE_MAP_NONE;
+}
+
+/* Free pte sub-tree behind an entry */
+static void p2m_free_subtree(struct p2m_domain *p2m,
+                             pte_t entry, unsigned int level)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+}
+
+/*
+ * Insert an entry in the p2m. This should be called with a mapping
+ * equal to a page/superpage.
+ */
+static int p2m_set_entry(struct p2m_domain *p2m,
+                           gfn_t gfn,
+                           unsigned long page_order,
+                           mfn_t mfn,
+                           p2m_type_t t)
+{
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 273

Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +6 -0
+    unsigned int level;
+    unsigned int target = page_order / PAGETABLE_ORDER;
+    pte_t *entry, *table, orig_pte;
+    int rc;
+    /* A mapping is removed if the MFN is invalid. */
+    bool removing_mapping = mfn_eq(mfn, INVALID_MFN);

Comment and code don't fit together. Many MFNs are invalid (any for which mfn_valid() returns false), yet you only check for INVALID_MFN here.

Probably, it makes sense to add an|ASSERT()| here for the case when |mfn_valid(mfn)| is false, but the MFN is not explicitly equal to|INVALID_MFN|. This would indicate that someone attempted to perform a mapping with an incorrect MFN, which, IMO, is entirely wrong.
In the case where the MFN is explicitly set to|INVALID_MFN|, I believe it's enough to indicate that a mapping is being removed.

Quoted 11 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 282

Quoted 9 lines
xen/arch/riscv/include/asm/p2m.h +9 -0
+    DECLARE_OFFSETS(offsets, gfn_to_gaddr(gfn));
+
+    ASSERT(p2m_is_write_locked(p2m));
+
+    /*
+     * Check if the level target is valid: we only support
+     * 4K - 2M - 1G mapping.
+     */
+    ASSERT((target <= 2) && !(page_order % PAGETABLE_ORDER));

If you think you need to check this, don't you also want to check that GFN and MFN (the latter if it isn't INVALID_MFN) fit the requested order?

I'm not 100% sure it makes sense to check|page_order|, as in IMO, proper alignment is already guaranteed by|p2m_mapping_order(sgfn, smfn, left)|, and thus both GFN and MFN are aligned accordingly.
So, I think this part of the check could be dropped.

Quoted 81 lines
Quoted 13 lines
xen/arch/riscv/include/asm/p2m.h +13 -0
+    table = p2m_get_root_pointer(p2m, gfn);
+    if ( !table )
+        return -EINVAL;
+
+    for ( level = P2M_ROOT_LEVEL; level > target; level-- )
+    {
+        /*
+         * Don't try to allocate intermediate page table if the mapping
+         * is about to be removed.
+         */
+        rc = p2m_next_level(p2m, !removing_mapping,
+                            level, &table, offsets[level]);
+        if ( (rc == P2M_TABLE_MAP_NONE) || (rc == P2M_TABLE_MAP_NOMEM) )

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 305

Quoted 10 lines
xen/arch/riscv/include/asm/p2m.h +10 -0
+        {
+            rc = (rc == P2M_TABLE_MAP_NONE) ? -ENOENT : -ENOMEM;
+            /*
+             * We are here because p2m_next_level has failed to map
+             * the intermediate page table (e.g the table does not exist
+             * and they p2m tree is read-only). It is a valid case
+             * when removing a mapping as it may not exist in the
+             * page table. In this case, just ignore it.
+             */
+            rc = removing_mapping ?  0 : rc;

Nit: Stray blank.

Quoted 56 lines
xen/arch/riscv/include/asm/p2m.h +56 -0
+            goto out;
+        }
+
+        if ( rc != P2M_TABLE_NORMAL )
+            break;
+    }
+
+    entry = table + offsets[level];
+
+    /*
+     * If we are here with level > target, we must be at a leaf node,
+     * and we need to break up the superpage.
+     */
+    if ( level > target )
+    {
+        panic("Shattering isn't implemented\n");
+    }
+
+    /*
+     * We should always be there with the correct level because all the
+     * intermediate tables have been installed if necessary.
+     */
+    ASSERT(level == target);
+
+    orig_pte = *entry;
+
+    if ( removing_mapping )
+        p2m_clean_pte(entry, p2m->clean_pte);
+    else
+    {
+        pte_t pte = p2m_pte_from_mfn(mfn, t);
+
+        p2m_write_pte(entry, pte, p2m->clean_pte);
+
+        p2m->max_mapped_gfn = gfn_max(p2m->max_mapped_gfn,
+                                      gfn_add(gfn, BIT(page_order, UL) - 1));
+        p2m->lowest_mapped_gfn = gfn_min(p2m->lowest_mapped_gfn, gfn);
+    }
+
+    p2m->need_flush = true;
+
+    /*
+     * Currently, the infrastructure required to enable CONFIG_HAS_PASSTHROUGH
+     * is not ready for RISC-V support.
+     *
+     * When CONFIG_HAS_PASSTHROUGH=y, iommu_iotlb_flush() should be done
+     * here.
+     */
+#ifdef CONFIG_HAS_PASSTHROUGH
+#   error "add code to flush IOMMU TLB"
+#endif
+
+    rc = 0;
+
+    /*
+     * Free the entry only if the original pte was valid and the base
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 365

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +4 -0
+     * is different (to avoid freeing when permission is changed).
+     */
+    if ( pte_is_valid(orig_pte) &&
+         !mfn_eq(pte_get_mfn(*entry), pte_get_mfn(orig_pte)) )

I'm puzzled by this 2nd check: A permission change would - I expect - only occur to a leaf entry. If the new entry is a super-page one and the old wasn't, don't you still need to free the sub-tree, no matter whether the MFNs are the same?

I expect the MFNs to differ in this scenario, so the old sub-tree will be freed.

Based on your example (new entry is super-page and old entry isn't):
For old mapping (lets say, 4 KiB leaf) p2m_set_entry() walks all levels down to L0, so we will have the following MMU page table walks:
L2 PTE -> L1 PTE (MFN of L0 page table) -> L0 PTE -> RAM

When new mapping (lets say, 2 MiB superpage) will be requested, p2m_set_entry() will stop at L1 (the superpage level):
L2 PTE -> L1 PTE (at this moment, L1 PTE points to L0 page table, which
points to RAM)
Then the old L1 PTE will be saved in 'orig_pte', then writes 'entry' with the RAM MFN for the 2 MiB mapping. The walk becomes:
L2 PTE -> L1 PTE -> RAM

Therefore, 'entry' now holds an MFN pointing to RAM (superpage leaf). 'orig_pte' still holds an MFN pointing to the L0 table (the old sub-tree). Since these MFNs differ, the code calls p2m_free_subtree(p2m, orig_pte, …) and frees the old L0 sub-tree.

Quoted 3 lines

Plus consider the special case of MFN 0: If you clear
an entry using MFN 0, you will find old and new PTEs' both having the same MFN.

Isn't this happen only when a mapping removal is explicitly requested? In the case of a mapping removal it seems to me it is enough just to clear PTE with all zeroes.

Quoted 35 lines

static int p2m_set_range(struct p2m_domain *p2m,
gfn_t sgfn, unsigned long nr, mfn_t smfn, p2m_type_t t)
{

xen/arch/riscv/p2m.c +28 -1
-    return -EOPNOTSUPP;
+    int rc = 0;
+    unsigned long left = nr;
+
+    /*
+     * Any reference taken by the P2M mappings (e.g. foreign mapping) will
+     * be dropped in relinquish_p2m_mapping(). As the P2M will still
+     * be accessible after, we need to prevent mapping to be added when the
+     * domain is dying.
+     */
+    if ( unlikely(p2m->domain->is_dying) )
+        return -EACCES;
+
+    while ( left )
+    {
+        unsigned long order = p2m_mapping_order(sgfn, smfn, left);
+
+        rc = p2m_set_entry(p2m, sgfn, order, smfn, t);
+        if ( rc )
+            break;
+
+        sgfn = gfn_add(sgfn, BIT(order, UL));
+        if ( !mfn_eq(smfn, INVALID_MFN) )
+           smfn = mfn_add(smfn, BIT(order, UL));
+
+        left -= BIT(order, UL);
+    }
+
+    return !left ? 0 : left == nr ? rc : (nr - left);
Quoted 3 lines

The function returning "int", you may be truncating the return value here. In the worst case indicating success (0) or an error (negative) when some of the upper bits were set.

I think what will be better:
or (1) Return long instead of int and the following check:
long result = nr - left;
if (result < 0 || result > LONG_MAX)

      return -ERANGE;

or (2) Just add new left_to_map (or just left) argument to p2m_set_range().

Quoted 3 lines

Also looks like you could get away with a single conditional operator here:

     return !left || left == nr ? rc : (nr - left);

Thanks.

~ Oleksii

#54 lore raw

Re: [PATCH v3 12/20] xen/riscv: implement p2m_set_range()

Quoted 24 lines · Oleksii Kurochko
Quoted 13 lines · Jan Beulich
Quoted 1 line · Oleksii Kurochko

This patch introduces p2m_set_range() and its core helper p2m_set_entry() for

Nit: This patch doesn't introduce p2m_set_range(); it merely fleshes it out.

Quoted 9 lines
xen/arch/riscv/include/asm/p2m.h +1 -0
@@ -7,11 +7,13 @@
  #include <xen/rwlock.h>
  #include <xen/types.h>
 
+#include <asm/page.h>
  #include <asm/page-bits.h>
 
Quoted 9 lines

xen/arch/riscv/include/asm/p2m.h line 16

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +1 -0
  extern unsigned int p2m_root_order;
  #define P2M_ROOT_ORDER  p2m_root_order
  #define P2M_ROOT_PAGES  BIT(P2M_ROOT_ORDER, U)
+#define P2M_ROOT_LEVEL  HYP_PT_ROOT_LEVEL

I think I commented on this before, and I would have hoped for at least a remark in the description to appear (perhaps even a comment here): It's okay(ish) to tie these together for now, but in the longer run I don't expect this is going to be wanted. If e.g. we ran Xen in Sv57 mode, there would be no reason at all to force all P2Ms to use 5 levels of page tables.

Quoted 4 lines

Do you mean that for G-stage it could be chosen any SvXX mode to limit an amount of page tables necessary for G-stage? If yes, then, at least, I agree that a comment should be added or, probably, "#warning optimize an amount of p2m root level for MMU mode > Sv48" (or maybe >=).

Yes.

Quoted 3 lines

Or do you mean if we set hgatp.mode=Sv57 then it is possible to limit an amount of page table's levels to use? In this case I think hardware still will expect to see 5 levels of page tables.

No.

Quoted 9 lines
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h

Quoted 5 lines
xen/arch/riscv/include/asm/p2m.h +5 -0
+static inline void p2m_write_pte(pte_t *p, pte_t pte, bool clean_pte)
+{
+    write_pte(p, pte);
+    if ( clean_pte )
+        clean_dcache_va_range(p, sizeof(*p));

Not necessarily for right away, but if multiple adjacent PTEs are written without releasing the lock, this then redundant cache flushing can be a performance issue.

Quoted 6 lines

Can't it be resolved on a caller side? Something like:

   p2m_write_pte(p1, pte1, false);
   p2m_write_pte(p2, pte2, false);
   p2m_write_pte(p3, pte3, false);
   p2m_write_pte(p4, pte4, true);

where p1-p4 are adjacent.

No. You wouldn't know whether the last write flushes what the earlier three have written. There may be a cacheline boundary in between. Plus I didn't really think of back-to-back writes, but e.g. a loop doing many of them, where a single wider flush may then be more efficient.

Quoted 57 lines
Quoted 48 lines

xen/arch/riscv/include/asm/p2m.h

Quoted 8 lines
xen/arch/riscv/include/asm/p2m.h +8 -0
+#define P2M_TABLE_MAP_NONE 0
+#define P2M_TABLE_MAP_NOMEM 1
+#define P2M_TABLE_SUPER_PAGE 2
+#define P2M_TABLE_NORMAL 3
+
+/*
+ * Take the currently mapped table, find the corresponding the entry
+ * corresponding to the GFN, and map the next table, if available.

Nit: Double "corresponding".

Quoted 38 lines

+ * The previous table will be unmapped if the next level was mapped
+ * (e.g P2M_TABLE_NORMAL returned).
+ *
+ * alloc_tbl parameter indicates whether intermediate tables should
+ * be allocated when not present.
+ *
+ * Return values:

+ *  P2M_TABLE_MAP_NONE: a table allocation isn't permitted.
+ *  P2M_TABLE_MAP_NOMEM: allocating a new page failed.
+ *  P2M_TABLE_SUPER_PAGE: next level or leaf mapped normally.
+ *  P2M_TABLE_NORMAL: The next entry points to a superpage.

+ */

xen/arch/riscv/include/asm/p2m.h +26 -0
+static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl,
+                          unsigned int level, pte_t **table,
+                          unsigned int offset)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+
+    return P2M_TABLE_MAP_NONE;
+}
+
+/* Free pte sub-tree behind an entry */
+static void p2m_free_subtree(struct p2m_domain *p2m,
+                             pte_t entry, unsigned int level)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+}
+
+/*
+ * Insert an entry in the p2m. This should be called with a mapping
+ * equal to a page/superpage.
+ */
+static int p2m_set_entry(struct p2m_domain *p2m,
+                           gfn_t gfn,
+                           unsigned long page_order,
+                           mfn_t mfn,
+                           p2m_type_t t)
+{
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h

Quoted 6 lines
xen/arch/riscv/include/asm/p2m.h +6 -0
+    unsigned int level;
+    unsigned int target = page_order / PAGETABLE_ORDER;
+    pte_t *entry, *table, orig_pte;
+    int rc;
+    /* A mapping is removed if the MFN is invalid. */
+    bool removing_mapping = mfn_eq(mfn, INVALID_MFN);

Comment and code don't fit together. Many MFNs are invalid (any for which mfn_valid() returns false), yet you only check for INVALID_MFN here.

Quoted 4 lines

Probably, it makes sense to add an|ASSERT()| here for the case when |mfn_valid(mfn)| is false, but the MFN is not explicitly equal to|INVALID_MFN|. This would indicate that someone attempted to perform a mapping with an incorrect MFN, which, IMO, is entirely wrong.

No, and we've been there before. MMIO can live anywhere, and mappings for such still will need to be permitted. It is correct to check only for INVALID_MFN here imo; it's just the comment which also needs to reflect that.

Quoted 56 lines
Quoted 47 lines
Quoted 47 lines
xen/arch/riscv/include/asm/p2m.h +47 -0
+    /*
+     * If we are here with level > target, we must be at a leaf node,
+     * and we need to break up the superpage.
+     */
+    if ( level > target )
+    {
+        panic("Shattering isn't implemented\n");
+    }
+
+    /*
+     * We should always be there with the correct level because all the
+     * intermediate tables have been installed if necessary.
+     */
+    ASSERT(level == target);
+
+    orig_pte = *entry;
+
+    if ( removing_mapping )
+        p2m_clean_pte(entry, p2m->clean_pte);
+    else
+    {
+        pte_t pte = p2m_pte_from_mfn(mfn, t);
+
+        p2m_write_pte(entry, pte, p2m->clean_pte);
+
+        p2m->max_mapped_gfn = gfn_max(p2m->max_mapped_gfn,
+                                      gfn_add(gfn, BIT(page_order, UL) - 1));
+        p2m->lowest_mapped_gfn = gfn_min(p2m->lowest_mapped_gfn, gfn);
+    }
+
+    p2m->need_flush = true;
+
+    /*
+     * Currently, the infrastructure required to enable CONFIG_HAS_PASSTHROUGH
+     * is not ready for RISC-V support.
+     *
+     * When CONFIG_HAS_PASSTHROUGH=y, iommu_iotlb_flush() should be done
+     * here.
+     */
+#ifdef CONFIG_HAS_PASSTHROUGH
+#   error "add code to flush IOMMU TLB"
+#endif
+
+    rc = 0;
+
+    /*
+     * Free the entry only if the original pte was valid and the base
Quoted 8 lines

xen/arch/riscv/include/asm/p2m.h

Quoted 4 lines
xen/arch/riscv/include/asm/p2m.h +4 -0
+     * is different (to avoid freeing when permission is changed).
+     */
+    if ( pte_is_valid(orig_pte) &&
+         !mfn_eq(pte_get_mfn(*entry), pte_get_mfn(orig_pte)) )

I'm puzzled by this 2nd check: A permission change would - I expect - only occur to a leaf entry. If the new entry is a super-page one and the old wasn't, don't you still need to free the sub-tree, no matter whether the MFNs are the same?

Quoted 1 line

I expect the MFNs to differ in this scenario, so the old sub-tree will be freed.

You expecting something isn't a good criteria. If it's possible, even if unexpected (by you), it needs dealing with correctly.

Quoted 11 lines

Based on your example (new entry is super-page and old entry isn't):
For old mapping (lets say, 4 KiB leaf) p2m_set_entry() walks all levels down to L0, so we will have the following MMU page table walks:

   L2 PTE -> L1 PTE (MFN of L0 page table) -> L0 PTE -> RAM

When new mapping (lets say, 2 MiB superpage) will be requested, p2m_set_entry() will stop at L1 (the superpage level):
L2 PTE -> L1 PTE (at this moment, L1 PTE points to L0 page table, which
points to RAM)
Then the old L1 PTE will be saved in 'orig_pte', then writes 'entry' with the RAM MFN for the 2 MiB mapping. The walk becomes:

Quoted 6 lines
   L2 PTE -> L1 PTE -> RAM

Therefore, 'entry' now holds an MFN pointing to RAM (superpage leaf). 'orig_pte' still holds an MFN pointing to the L0 table (the old sub-tree). Since these MFNs differ, the code calls p2m_free_subtree(p2m, orig_pte, …) and frees the old L0 sub-tree.

A particular example doesn't help. All possible cases need handling correctly.

Quoted 7 lines
Quoted 3 lines

Plus consider the special case of MFN 0: If you clear
an entry using MFN 0, you will find old and new PTEs' both having the same MFN.

Isn't this happen only when a mapping removal is explicitly requested? In the case of a mapping removal it seems to me it is enough just to clear PTE with all zeroes.

Correct. Which means original MFN (PPN) and new MFN (PPN) would match.

Jan

#60 lore raw

Re: [PATCH v3 13/20] xen/riscv: Implement p2m_free_subtree() and related helpers

In reply to Jan Beulich
Quoted 32 lines · Jan Beulich
Quoted 31 lines · Oleksii Kurochko
Quoted 17 lines · Jan Beulich
Quoted 16 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +16 -0
+/* Put any references on the page referenced by pte. */
+static void p2m_put_page(const pte_t pte, unsigned int level)
+{
+    mfn_t mfn = pte_get_mfn(pte);
+    p2m_type_t p2m_type = p2m_get_type(pte);
+
+    ASSERT(pte_is_valid(pte));
+
+    /*
+     * TODO: Currently we don't handle level 2 super-page, Xen is not
+     * preemptible and therefore some work is needed to handle such
+     * superpages, for which at some point Xen might end up freeing memory
+     * and therefore for such a big mapping it could end up in a very long
+     * operation.
+     */
+    switch ( level )
Quoted 8 lines

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 328

Quoted 7 lines
xen/arch/riscv/p2m.c +7 -0
+    {
+    case 1:
+        return p2m_put_2m_superpage(mfn, p2m_type);
+
+    case 0:
+        return p2m_put_4k_page(mfn, p2m_type);
+    }

Yet despite the comment not even an assertion for level 2 and up?

Not sure that an ASSERT() is needed here as a reference(s) for such page(s) will be put during domain_relinquish_resources() as there we could do preemption. Something like Arm does here:

    https://gitlab.com/xen-project/people/olkur/xen/-/blob/staging/xen/arch/arm/mmu/p2m.c?ref_type=heads#L1587
Quoted 5 lines
Quoted 2 lines

I'm thinking that probably it makes sense to put only 4k page(s) and all other cases postpone until domain_relinquish_resources() is called.

How can you defer to domain cleanup? How would handling of foreign mappings (or e.g. ballooning? not sure) work when you don't drop references as necessary?

I was confused by the code in|relinquish_p2m_mapping()|, since it removes foreign mappings from the P2M. My current understanding is that it is called for foreign mappings that weren’t explicitly unmapped, in order to drop the page reference taken when the mapping was created. Initially, I thought it would be enough to just perform the (un)map in the P2M page tables to have foreign mapping working, but that could result in a page never being fully released, which would in turn break or confuse other logic.

So, yes, I agree that your initial suggestion to add ASSERT() is useful to be sure that no one is using level 2 super-pages for foreign mapping.

Quoted 40 lines
Quoted 40 lines
Quoted 40 lines
Quoted 5 lines

/* Free pte sub-tree behind an entry */
static void p2m_free_subtree(struct p2m_domain *p2m,
pte_t entry, unsigned int level)
{

xen/arch/riscv/p2m.c +0 -1
-    panic("%s: hasn't been implemented yet\n", __func__);

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 351

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+    unsigned int i;
+    pte_t *table;
+    mfn_t mfn;
+    struct page_info *pg;
+
+    /* Nothing to do if the entry is invalid. */
+    if ( !pte_is_valid(entry) )
+        return;
+
+    if ( pte_is_superpage(entry, level) || (level == 0) )

Perhaps swap the two conditions around?

Quoted 11 lines
xen/arch/riscv/p2m.c +11 -0
+    {
+#ifdef CONFIG_IOREQ_SERVER
+        /*
+         * If this gets called then either the entry was replaced by an entry
+         * with a different base (valid case) or the shattering of a superpage
+         * has failed (error case).
+         * So, at worst, the spurious mapcache invalidation might be sent.
+         */
+        if ( p2m_is_ram(p2m_get_type(p2m, entry)) &&
+             domain_has_ioreq_server(p2m->domain) )
+            ioreq_request_mapcache_invalidate(p2m->domain);

xen/arch/riscv/p2m.c static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl, · line 372

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+#endif
+
+        p2m_put_page(entry, level);
+
+        return;
+    }
+
+    table = map_domain_page(pte_get_mfn(entry));
+    for ( i = 0; i < XEN_PT_ENTRIES; i++ )
+        p2m_free_subtree(p2m, table[i], level - 1);

In p2m_put_page() you comment towards concerns for level >= 2; no similar concerns for the resulting recursion here?

Quoted 7 lines
Quoted 5 lines

This function is generic enough to handle any level.

Except that it is possible that it will be needed, for example, to split 1G mapping into something smaller then p2m_free_subtree() could be called for freeing a subtree of 1gb mapping.

The question wasn't about it being generic enough, but it possibly taking too much time for level >= 2.

In this terms it makes sense to add such an assertion which will check that we are working with levels <= 2.

Thanks.

~ Oleksii

#55 lore raw

Re: [PATCH v3 12/20] xen/riscv: implement p2m_set_range()

In reply to Jan Beulich
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Oleksii Kurochko
Quoted 9 lines · Jan Beulich

xen/arch/riscv/p2m.c int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 204

Quoted 5 lines · Oleksii Kurochko
xen/arch/riscv/p2m.c +5 -0
+static inline void p2m_write_pte(pte_t *p, pte_t pte, bool clean_pte)
+{
+    write_pte(p, pte);
+    if ( clean_pte )
+        clean_dcache_va_range(p, sizeof(*p));

Not necessarily for right away, but if multiple adjacent PTEs are written without releasing the lock, this then redundant cache flushing can be a performance issue.

Quoted 8 lines
Quoted 6 lines

Can't it be resolved on a caller side? Something like:

    p2m_write_pte(p1, pte1, false);
    p2m_write_pte(p2, pte2, false);
    p2m_write_pte(p3, pte3, false);
    p2m_write_pte(p4, pte4, true);

where p1-p4 are adjacent.

No. You wouldn't know whether the last write flushes what the earlier three have written. There may be a cacheline boundary in between.

Oh, correct. It would be hard to detect, so agree that it will work badly...

Quoted 3 lines

Plus
I didn't really think of back-to-back writes, but e.g. a loop doing many of them, where a single wider flush may then be more efficient.

... So IIUC you mean something like:
for (i = 0; i < nr_entries; i++)

      p2m_write_pte(&pt[i], entries[i], false);  // no flush yet
  clean_dcache_va_range(pt, nr_entries * sizeof(pte_t));
Quoted 56 lines
Quoted 56 lines
Quoted 56 lines

xen/arch/riscv/p2m.c int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 229

Quoted 8 lines
xen/arch/riscv/p2m.c +8 -0
+#define P2M_TABLE_MAP_NONE 0
+#define P2M_TABLE_MAP_NOMEM 1
+#define P2M_TABLE_SUPER_PAGE 2
+#define P2M_TABLE_NORMAL 3
+
+/*
+ * Take the currently mapped table, find the corresponding the entry
+ * corresponding to the GFN, and map the next table, if available.

Nit: Double "corresponding".

Quoted 34 lines

+ * The previous table will be unmapped if the next level was mapped
+ * (e.g P2M_TABLE_NORMAL returned).
+ *
+ * alloc_tbl parameter indicates whether intermediate tables should
+ * be allocated when not present.
+ *
+ * Return values:

+ *  P2M_TABLE_MAP_NONE: a table allocation isn't permitted.
+ *  P2M_TABLE_MAP_NOMEM: allocating a new page failed.
+ *  P2M_TABLE_SUPER_PAGE: next level or leaf mapped normally.
+ *  P2M_TABLE_NORMAL: The next entry points to a superpage.

+ */

xen/arch/riscv/p2m.c +22 -0
+static int p2m_next_level(struct p2m_domain *p2m, bool alloc_tbl,
+                          unsigned int level, pte_t **table,
+                          unsigned int offset)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+
+    return P2M_TABLE_MAP_NONE;
+}
+
+/* Free pte sub-tree behind an entry */
+static void p2m_free_subtree(struct p2m_domain *p2m,
+                             pte_t entry, unsigned int level)
+{
+    panic("%s: hasn't been implemented yet\n", __func__);
+}
+
+/*
+ * Insert an entry in the p2m. This should be called with a mapping
+ * equal to a page/superpage.
+ */
+static int p2m_set_entry(struct p2m_domain *p2m,
+                           gfn_t gfn,

xen/arch/riscv/p2m.c int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 273

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+                           unsigned long page_order,
+                           mfn_t mfn,
+                           p2m_type_t t)
+{
+    unsigned int level;
+    unsigned int target = page_order / PAGETABLE_ORDER;
+    pte_t *entry, *table, orig_pte;
+    int rc;
+    /* A mapping is removed if the MFN is invalid. */
+    bool removing_mapping = mfn_eq(mfn, INVALID_MFN);

Comment and code don't fit together. Many MFNs are invalid (any for which mfn_valid() returns false), yet you only check for INVALID_MFN here.

Quoted 8 lines
Quoted 4 lines

Probably, it makes sense to add an|ASSERT()| here for the case when |mfn_valid(mfn)| is false, but the MFN is not explicitly equal to|INVALID_MFN|. This would indicate that someone attempted to perform a mapping with an incorrect MFN, which, IMO, is entirely wrong.

No, and we've been there before. MMIO can live anywhere, and mappings for such still will need to be permitted. It is correct to check only for INVALID_MFN here imo; it's just the comment which also needs to reflect that.

Got it now. The original one comment looked clear to me, but considering what you wrote, I will update the comment then to:
A mapping is removed only if the MFN is explicitly passed as INVALID_MFN.
Also, perhaps, it makes sense to add the following:
Other MFNs that are not valid (e.g., MMIO) from mfn_valid() point of view are allowed.

Does it make more sense now?

Quoted 73 lines
Quoted 56 lines
Quoted 48 lines
Quoted 48 lines
xen/arch/riscv/p2m.c +47 -0
+    /*
+     * If we are here with level > target, we must be at a leaf node,
+     * and we need to break up the superpage.
+     */
+    if ( level > target )
+    {
+        panic("Shattering isn't implemented\n");
+    }
+
+    /*
+     * We should always be there with the correct level because all the
+     * intermediate tables have been installed if necessary.
+     */
+    ASSERT(level == target);
+
+    orig_pte = *entry;
+
+    if ( removing_mapping )
+        p2m_clean_pte(entry, p2m->clean_pte);
+    else
+    {
+        pte_t pte = p2m_pte_from_mfn(mfn, t);
+
+        p2m_write_pte(entry, pte, p2m->clean_pte);
+
+        p2m->max_mapped_gfn = gfn_max(p2m->max_mapped_gfn,
+                                      gfn_add(gfn, BIT(page_order, UL) - 1));
+        p2m->lowest_mapped_gfn = gfn_min(p2m->lowest_mapped_gfn, gfn);
+    }
+
+    p2m->need_flush = true;
+
+    /*
+     * Currently, the infrastructure required to enable CONFIG_HAS_PASSTHROUGH
+     * is not ready for RISC-V support.
+     *
+     * When CONFIG_HAS_PASSTHROUGH=y, iommu_iotlb_flush() should be done
+     * here.
+     */
+#ifdef CONFIG_HAS_PASSTHROUGH
+#   error "add code to flush IOMMU TLB"
+#endif
+
+    rc = 0;
+
+    /*
+     * Free the entry only if the original pte was valid and the base
Quoted 8 lines

xen/arch/riscv/p2m.c int p2m_set_allocation(struct domain *d, unsigned long pages, bool *preempted) · line 366

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+     * is different (to avoid freeing when permission is changed).
+     */
+    if ( pte_is_valid(orig_pte) &&
+         !mfn_eq(pte_get_mfn(*entry), pte_get_mfn(orig_pte)) )

I'm puzzled by this 2nd check: A permission change would - I expect - only occur to a leaf entry. If the new entry is a super-page one and the old wasn't, don't you still need to free the sub-tree, no matter whether the MFNs are the same?

Quoted 1 line

I expect the MFNs to differ in this scenario, so the old sub-tree will be freed.

You expecting something isn't a good criteria. If it's possible, even if unexpected (by you), it needs dealing with correctly.

Quoted 13 lines

Based on your example (new entry is super-page and old entry isn't):
For old mapping (lets say, 4 KiB leaf) p2m_set_entry() walks all levels down to L0, so we will have the following MMU page table walks:

    L2 PTE -> L1 PTE (MFN of L0 page table) -> L0 PTE -> RAM

When new mapping (lets say, 2 MiB superpage) will be requested, p2m_set_entry() will stop at L1 (the superpage level):
L2 PTE -> L1 PTE (at this moment, L1 PTE points to L0 page table, which
points to RAM)
Then the old L1 PTE will be saved in 'orig_pte', then writes 'entry' with the RAM MFN for the 2 MiB mapping. The walk becomes:

    L2 PTE -> L1 PTE -> RAM
Quoted 5 lines
Quoted 4 lines

Therefore, 'entry' now holds an MFN pointing to RAM (superpage leaf). 'orig_pte' still holds an MFN pointing to the L0 table (the old sub-tree). Since these MFNs differ, the code calls p2m_free_subtree(p2m, orig_pte, …) and frees the old L0 sub-tree.

A particular example doesn't help. All possible cases need handling correctly.

For sure, all possible cases need handling correctly, but I don't see any cases except one you mentioned below where MFNs will be the same.

Quoted 8 lines
Quoted 7 lines
Quoted 4 lines

Plus consider the special case of MFN 0: If you clear
an entry using MFN 0, you will find old and new PTEs' both having the same MFN.

Isn't this happen only when a mapping removal is explicitly requested? In the case of a mapping removal it seems to me it is enough just to clear PTE with all zeroes.

Correct. Which means original MFN (PPN) and new MFN (PPN) would match.

Oh, I got it what is the issue here. If previously MFN 0 was mapped, then it is going to be removed and considering that during removing MFN 0 is used, we won't put MFN 0 page reference (mapped earlier) because p2m_free_subtree() won't be called.

In this case, if-condidtion should be updated with:
@@ -883,7 +890,8 @@ static int p2m_set_entry(struct p2m_domain *p2m,

        * is different (to avoid freeing when permission is changed).
        */
       if ( pte_is_valid(orig_pte) &&

- !mfn_eq(pte_get_mfn(*entry), pte_get_mfn(orig_pte)) )
+ (!mfn_eq(pte_get_mfn(*entry), pte_get_mfn(orig_pte)) ||
+ (removing_mapping && mfn_eq(pte_get_mfn(*entry), mfn_t(0))) )

or call p2m_free_subentry() in remove_mapping handling:
@@ -850,7 +852,12 @@ static int p2m_set_entry(struct p2m_domain *p2m,
orig_pte = *entry;

if ( removing_mapping )
+ {
+ if ( mfn_eq(pte_get_mfn(*entry), mfn_t(0) )
+ p2m_free_subtree(p2m, orig_pte, level, virt_to_page(table), offsets[level]);
+

         p2m_clean_pte(entry, p2m->clean_pte);

+ }
else

~ Oleksii

#80 lore raw

Re: [PATCH v3 19/20] xen/riscv: add support of page lookup by GFN

In reply to Jan Beulich
Quoted 30 lines · Jan Beulich
Quoted 12 lines

+ * The page_order will correspond to the order of the mapping in the page
+ * table (i.e it could be a superpage).
+ *
+ * If the entry is not present, INVALID_MFN will be returned and the
+ * page_order will be set according to the order of the invalid range.
+ *
+ * valid will contain the value of bit[0] (e.g valid bit) of the
+ * entry.
+ */

xen/arch/riscv/p2m.c +3 -0
+static mfn_t p2m_get_entry(struct p2m_domain *p2m, gfn_t gfn,
+                           p2m_type_t *t,
+                           unsigned int *page_order,

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 881

Quoted 10 lines
xen/arch/riscv/p2m.c +10 -0
+                           bool *valid)
+{
+    unsigned int level = 0;
+    pte_t entry, *table;
+    int rc;
+    mfn_t mfn = INVALID_MFN;
+    DECLARE_OFFSETS(offsets, gfn_to_gaddr(gfn));
+
+    ASSERT(p2m_is_locked(p2m));
+    BUILD_BUG_ON(XEN_PT_LEVEL_MAP_MASK(0) != PAGE_MASK);

What function-wide property is this check about? Even when moved ...

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 886

Quoted 4 lines
xen/arch/riscv/p2m.c +4 -0
+    if ( valid )
+        *valid = false;
+
+    /* XXX: Check if the mapping is lower than the mapped gfn */

(Nested: What is this about?)

Quoted 7 lines

xen/arch/riscv/p2m.c int map_regions_p2mt(struct domain *d, · line 892

Quoted 5 lines
xen/arch/riscv/p2m.c +5 -0
+    /* This gfn is higher than the highest the p2m map currently holds */
+    if ( gfn_x(gfn) > gfn_x(p2m->max_mapped_gfn) )
+    {
+        for ( level = P2M_ROOT_LEVEL; level; level-- )
+            if ( (gfn_x(gfn) & (XEN_PT_LEVEL_MASK(level) >> PAGE_SHIFT)) >

... into the more narrow scope where another XEN_PT_LEVEL_MASK() exists I can't really spot what the check is to guard against.

Missed to answer in my prev. reply to this and noticed that only during start of reworking it.

I think it makes sense to update the comment above if condition, this is needed to find the highest possible order by checking the base of the block mapping is greater than the max mapped gfn as it is mentioned in the description of the function, if the entry is not present, the function will return the order of the invalid range.

I expect that probably it makes sense to do something similar for ->lowest_mapped_gfn and it is a reason why /* XXX: ... */ comment exist.

~ Oleksii

Quoted 6 lines
Quoted 6 lines
xen/arch/riscv/p2m.c +5 -0
+                 gfn_x(p2m->max_mapped_gfn) )
+                break;
+
+        goto out;
+    }