Skip to contentSkip to conversation

wasm: Enable 64bit guests on TCI using wasm64

PATCH Superseded Kohei Tokunaga 3 participants 14 messages Aug 4, 2025 – Aug 6, 2025 Arm/Amlogic Meson SoC support

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover wasm: Enable 64bit guests on TCI using wasm64

This patch series enables the TCI of the Wasm build to run 64bit guests. Unlike the previous series[1], this patch series is implemented by adding support for WebAssembly's "wasm64" target which enables 64bit pointers.

In the previous discussion[2], the main challenge of using wasm64 was its limited adoption, particularly the lack of support in our dependency (libffi) and some engines such as Safari.

For libffi, I've completed the addition of wasm64 support upstream[3] so it can be used.

To support wasm32 engines, this patch uses Emscripten's compatibility feature, -sMEMORY64=2 flag[4]. This flag still enables 64bit pointers in the C code while Emscripten lowers the output binary to wasm32 and limits the maximum memory size to 4GB. As a result, QEMU can run on wasm32 engiens while still supporting 64bit guests.

# Overview of the build process

To compile QEMU with Emscripten, the following dependencies are required. The emsdk-wasm-cross.docker environment includes all necessary components and can be used as the build environment:

- Emscripten SDK (emsdk) v4.0.10
- Libraries cross-compiled with Emscripten (please see also emsdk-wasm-cross.docker for build steps)
- GLib v2.84.0
- zlib v1.3.1
- libffi v3.5.2
- Pixman v0.44.2

The configure script supports --cpu=wasm64 flag to compile QEMU with 64bit pointer support.

emconfigure ./configure --cpu=wasm64 \
                        --static --disable-tools \
                        --target-list=x86_64-softmmu \
                        --enable-tcg-interpreter

emmake make -j$(nproc)

If the output needs to run on wasm32 engines, use --wasm64-memory64=2 flag. This flag propagates the value to Emscripten's -sMEMORY64 flag[4].

emconfigure ./configure --cpu=wasm64 --wasm64-memory64=2 \
                        --static --disable-tools \
                        --target-list=x86_64-softmmu \
                        --enable-tcg-interpreter

emmake make -j$(nproc)

Either of the above commands generates the following files:

- qemu-system-x86_64.js
- qemu-system-x86_64.wasm

Guest images can be packaged using Emscripten's file_packager.py tool. For example, if the images are stored in a directory named "pack", the following command packages them, allowing QEMU to access them through Emscripten's virtual filesystem:

/path/to/file_packager.py qemu-system-x86_64.data --preload pack > load.js

This process generates the following files:

- qemu-system-x86_64.data
- load.js

Emscripten allows passing arguments to the QEMU command via the Module object in JavaScript:

Module['arguments'] = [

    '-nographic', '-m', '512M',
    '-L', 'pack/',
    '-drive', 'if=virtio,format=raw,file=pack/rootfs.bin',
    '-kernel', 'pack/bzImage',
    '-append', 'earlyprintk=ttyS0 console=ttyS0 root=/dev/vda loglevel=7',

];

The sample repository[5] (tcidev64 branch) provides a complete setup, including an HTML file that implements a terminal UI.

[1] https://lists.nongnu.org/archive/html/qemu-devel/2025-05/msg05376.html
[2] https://lists.nongnu.org/archive/html/qemu-devel/2025-04/msg01795.html
[3] https://github.com/libffi/libffi/pull/927
[4] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64
[5] https://github.com/ktock/qemu-wasm-sample/tree/tcidev64

Kohei Tokunaga (4):
meson: Add wasm64 support to the --cpu flag
configure: Enable to propagate -sMEMORY64 flag to Emscripten
dockerfiles: Add support for wasm64 to the wasm Dockerfile .gitlab-ci.d: Add build tests for wasm64

 .gitlab-ci.d/buildtest.yml                    | 24 +++++++++++++--
 .gitlab-ci.d/container-cross.yml              | 18 +++++++++++-
 .gitlab-ci.d/container-template.yml           |  4 ++-
 MAINTAINERS                                   |  2 +-
 configure                                     | 14 ++++++++-
 meson.build                                   |  4 +--
 ...2-cross.docker => emsdk-wasm-cross.docker} | 29 ++++++++++++++-----
 7 files changed, 79 insertions(+), 16 deletions(-)
 rename tests/docker/dockerfiles/{emsdk-wasm32-cross.docker => emsdk-wasm-cross.docker} (85%)
Signature · 1 line
2.43.0
#3 lore raw

PATCH 2/4 configure: Enable to propagate -sMEMORY64 flag to Emscripten

Currently there are some engines that don't support wasm64 (e.g. unsupported on Safari[1]). To mitigate this issue, the configure script allows the user to use Emscripten's compatibility feature, "-sMEMORY64=2" flag[2].

Emscripten's "-sMEMORY64=2" flag still enables 64bit pointers in C code. But this flag lowers the output binary into wasm32, with limiting the maximum memory size to 4GB. So QEMU can run on wasm32 engines.

This commit adds "--wasm64-memory64" flag to the configure script. This takes the value to propagate to Emscripten's -sMEMORY64. 1(default) targets wasm64 engines and 2 targets wasm32 engines with still enabling 64bit pointers.

[1] https://webassembly.org/features/
[2] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

---
 configure | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
configure +9 -1
index 7f3893a42f..8573f84e26 100755
@@ -182,6 +182,8 @@ EXTRA_CXXFLAGS=""
 EXTRA_OBJCFLAGS=""
 EXTRA_LDFLAGS=""
 
+wasm64_memory64=1
+
 # Default value for a variable defining feature "foo".
 #  * foo="no"  feature will only be used if --enable-foo arg is given
 #  * foo=""    feature will be searched for, and if found, will be used
@@ -239,6 +241,8 @@ for opt do
   ;;
   --without-default-features) default_feature="no"
   ;;
+  --wasm64-memory64=*) wasm64_memory64="$optarg"
+  ;;
   esac
 done
 
@@ -537,7 +541,7 @@ case "$cpu" in
     CPU_CFLAGS="-m32"
     ;;
   wasm64)
-    CPU_CFLAGS="-m64 -sMEMORY64=1"
+    CPU_CFLAGS="-m64 -sMEMORY64=$wasm64_memory64"
     ;;
 esac
 
@@ -795,6 +799,8 @@ for opt do
   ;;
   --disable-rust) rust=disabled
   ;;
+  --wasm64-memory64=*)
+  ;;
   # everything else has the same name in configure and meson
   --*) meson_option_parse "$opt" "$optarg"
   ;;
@@ -920,6 +926,8 @@ Advanced options (experts only):
   --disable-containers     don't use containers for cross-building
   --container-engine=TYPE  which container engine to use [$container_engine]
   --gdb=GDB-path           gdb to use for gdbstub tests [$gdb_bin]
+  --wasm64-memory64        Used only for wasm64 build. Set -sMEMORY64 of
+                           Emscripten to 1(default) or 2 (choices: 1/2)
 EOF
   meson_options_help
 cat << EOF
Signature · 1 line
2.43.0
#8 lore raw

PATCH 3/4 dockerfiles: Add support for wasm64 to the wasm Dockerfile

In reply to Kohei Tokunaga

This commit fixes Dockerfile of the wasm build to support both of wasm32 and wasm64 build. Dockerfile takes the following build arguments and use these values for building dependencies.

- TARGET_CPU: target wasm arch (wasm32 or wasm64)
- WASM64_MEMORY64: target -sMEMORY64 mode (1 or 2)

---
 MAINTAINERS                                   |  2 +-
 ...2-cross.docker => emsdk-wasm-cross.docker} | 29 ++++++++++++++-----
 2 files changed, 23 insertions(+), 8 deletions(-)
 rename tests/docker/dockerfiles/{emsdk-wasm32-cross.docker => emsdk-wasm-cross.docker} (85%)
MAINTAINERS +1 -1
index 28cea34271..47b35bae47 100644
@@ -647,7 +647,7 @@ F: include/system/os-wasm.h
 F: os-wasm.c
 F: util/coroutine-wasm.c
 F: configs/meson/emscripten.txt
-F: tests/docker/dockerfiles/emsdk-wasm32-cross.docker
+F: tests/docker/dockerfiles/emsdk-wasm-cross.docker
 
 Alpha Machines
 --------------
tests/docker/dockerfiles/emsdk-wasm-cross.docker renamed from tests/docker/dockerfiles/emsdk-wasm32-cross.docker +22 -7
similarity index 85%
rename from tests/docker/dockerfiles/emsdk-wasm32-cross.docker
rename to tests/docker/dockerfiles/emsdk-wasm-cross.docker
index 60a7d02f56..4b41be62ab 100644
@@ -1,14 +1,17 @@
 # syntax = docker/dockerfile:1.5
 
-ARG EMSDK_VERSION_QEMU=3.1.50
+ARG EMSDK_VERSION_QEMU=4.0.10
 ARG ZLIB_VERSION=1.3.1
 ARG GLIB_MINOR_VERSION=2.84
 ARG GLIB_VERSION=${GLIB_MINOR_VERSION}.0
 ARG PIXMAN_VERSION=0.44.2
-ARG FFI_VERSION=v3.4.7
+ARG FFI_VERSION=v3.5.2
 ARG MESON_VERSION=1.5.0
+ARG TARGET_CPU=wasm32
+ARG WASM64_MEMORY64=0
 
-FROM emscripten/emsdk:$EMSDK_VERSION_QEMU AS build-base
+FROM emscripten/emsdk:$EMSDK_VERSION_QEMU AS build-base-common
+ARG TARGET_CPU
 ARG MESON_VERSION
 ENV TARGET=/builddeps/target
 ENV CPATH="$TARGET/include"
@@ -33,8 +36,8 @@ RUN <<EOF
 cat <<EOT > /cross.meson
 [host_machine]
 system = 'emscripten'
-cpu_family = 'wasm32'
-cpu = 'wasm32'
+cpu_family = '${TARGET_CPU}'
+cpu = '${TARGET_CPU}'
 endian = 'little'
 
 [binaries]
@@ -46,6 +49,16 @@ pkgconfig = ['pkg-config', '--static']
 EOT
 EOF
 
+FROM build-base-common AS build-base-wasm32
+
+FROM build-base-common AS build-base-wasm64
+ARG WASM64_MEMORY64
+ENV CFLAGS="$CFLAGS -sMEMORY64=${WASM64_MEMORY64}"
+ENV CXXFLAGS="$CXXFLAGS -sMEMORY64=${WASM64_MEMORY64}"
+ENV LDFLAGS="$LDFLAGS -sMEMORY64=${WASM64_MEMORY64}"
+
+FROM build-base-${TARGET_CPU} AS build-base
+
 FROM build-base AS zlib-dev
 ARG ZLIB_VERSION
 RUN mkdir -p /zlib
@@ -56,17 +69,19 @@ RUN emconfigure ./configure --prefix=$TARGET --static
 RUN emmake make install -j$(nproc)
 
 FROM build-base AS libffi-dev
+ARG TARGET_CPU
+ARG WASM64_MEMORY64
 ARG FFI_VERSION
 RUN mkdir -p /libffi
 RUN git clone https://github.com/libffi/libffi /libffi
 WORKDIR /libffi
 RUN git checkout $FFI_VERSION
 RUN autoreconf -fiv
-RUN emconfigure ./configure --host=wasm32-unknown-linux \
+RUN emconfigure ./configure --host=${TARGET_CPU}-unknown-linux \
     --prefix=$TARGET --enable-static \
     --disable-shared --disable-dependency-tracking \
     --disable-builddir --disable-multi-os-directory \
-    --disable-raw-api --disable-docs
+    --disable-raw-api --disable-docs WASM64_MEMORY64=${WASM64_MEMORY64}
 RUN emmake make install SUBDIRS='include' -j$(nproc)
 
 FROM build-base AS pixman-dev
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/4 meson: Add wasm64 support to the --cpu flag

In reply to Kohei Tokunaga

wasm64 target enables 64bit pointers using Emscripten's -sMEMORY64=1 flag[1]. This enables QEMU to run 64bit guests.

Although the configure script uses "uname -m" as the fallback value when "cpu" is empty, this can't be used for Emscripten which targets to Wasm. So, in wasm build, this commit fixes configure to require --cpu flag to be explicitly specified by the user.

[1] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

---
 configure   | 6 +++++-
 meson.build | 4 ++--
 2 files changed, 7 insertions(+), 3 deletions(-)
configure +5 -1
index 825057ebf1..7f3893a42f 100755
@@ -365,7 +365,6 @@ elif check_define __APPLE__; then
   host_os=darwin
 elif check_define EMSCRIPTEN ; then
   host_os=emscripten
-  cpu=wasm32
   cross_compile="yes"
 else
   # This is a fatal error, but don't report it yet, because we
@@ -425,6 +424,8 @@ elif check_define __aarch64__ ; then
   cpu="aarch64"
 elif check_define __loongarch64 ; then
   cpu="loongarch64"
+elif check_define EMSCRIPTEN ; then
+  error_exit "wasm32 or wasm64 must be specified to the cpu flag"
 else
   # Using uname is really broken, but it is just a fallback for architectures
   # that are going to use TCI anyway
@@ -535,6 +536,9 @@ case "$cpu" in
   wasm32)
     CPU_CFLAGS="-m32"
     ;;
+  wasm64)
+    CPU_CFLAGS="-m64 -sMEMORY64=1"
+    ;;
 esac
 
 if test -n "$host_arch" && {
meson.build +2 -2
index e53cd5b413..291fe3f0d0 100644
@@ -52,7 +52,7 @@ qapi_trace_events = []
 bsd_oses = ['gnu/kfreebsd', 'freebsd', 'netbsd', 'openbsd', 'dragonfly', 'darwin']
 supported_oses = ['windows', 'freebsd', 'netbsd', 'openbsd', 'darwin', 'sunos', 'linux', 'emscripten']
 supported_cpus = ['ppc', 'ppc64', 's390x', 'riscv32', 'riscv64', 'x86', 'x86_64',
-  'arm', 'aarch64', 'loongarch64', 'mips', 'mips64', 'sparc64', 'wasm32']
+  'arm', 'aarch64', 'loongarch64', 'mips', 'mips64', 'sparc64', 'wasm32', 'wasm64']
 
 cpu = host_machine.cpu_family()
 
@@ -916,7 +916,7 @@ if have_tcg
     if not get_option('tcg_interpreter')
       error('Unsupported CPU @0@, try --enable-tcg-interpreter'.format(cpu))
     endif
-  elif host_arch == 'wasm32'
+  elif host_arch == 'wasm32' or host_arch == 'wasm64'
     if not get_option('tcg_interpreter')
       error('WebAssembly host requires --enable-tcg-interpreter')
     endif
Signature · 1 line
2.43.0
#10 lore raw

PATCH 4/4 .gitlab-ci.d: Add build tests for wasm64

In reply to Kohei Tokunaga

The wasm builds are tested for 3 targets: wasm32, wasm64(-sMEMORY64=1) and wasm64(-sMEMORY64=2). The CI builds the containers using the same Dockerfile (emsdk-wasm-cross.docker) with different build args.

---
 .gitlab-ci.d/buildtest.yml          | 24 +++++++++++++++++++++---
 .gitlab-ci.d/container-cross.yml    | 18 +++++++++++++++++-
 .gitlab-ci.d/container-template.yml |  4 +++-
 3 files changed, 41 insertions(+), 5 deletions(-)
.gitlab-ci.d/buildtest.yml +21 -3
index d888a60063..f45efbaae3 100644
@@ -787,11 +787,29 @@ coverity:
     # Always manual on forks even if $QEMU_CI == "2"
     - when: manual
 
-build-wasm:
+build-wasm32:
   extends: .wasm_build_job_template
   timeout: 2h
   needs:
-    job: wasm-emsdk-cross-container
+    job: wasm32-emsdk-cross-container
   variables:
     IMAGE: emsdk-wasm32-cross
-    CONFIGURE_ARGS: --static --disable-tools --enable-debug --enable-tcg-interpreter
+    CONFIGURE_ARGS: --static --cpu=wasm32 --disable-tools --enable-debug --enable-tcg-interpreter
+
+build-wasm-wasm64:
+  extends: .wasm_build_job_template
+  timeout: 2h
+  needs:
+    job: wasm64-emsdk-cross-container
+  variables:
+    IMAGE: emsdk-wasm64-cross
+    CONFIGURE_ARGS: --static --cpu=wasm64 --wasm64-memory64=1 --disable-tools --enable-debug --enable-tcg-interpreter
+
+build-wasm-wasm64l:
+  extends: .wasm_build_job_template
+  timeout: 2h
+  needs:
+    job: wasm64l-emsdk-cross-container
+  variables:
+    IMAGE: emsdk-wasm64l-cross
+    CONFIGURE_ARGS: --static --cpu=wasm64 --wasm64-memory64=2 --disable-tools --enable-debug --enable-tcg-interpreter
.gitlab-ci.d/container-cross.yml +17 -1
index 8d3be53b75..1bacaff818 100644
@@ -92,7 +92,23 @@ win64-fedora-cross-container:
   variables:
     NAME: fedora-win64-cross
 
-wasm-emsdk-cross-container:
+wasm32-emsdk-cross-container:
   extends: .container_job_template
   variables:
     NAME: emsdk-wasm32-cross
+    BUILD_ARGS: --build-arg TARGET_CPU=wasm32
+    DOCKERFILE: emsdk-wasm-cross
+
+wasm64-emsdk-cross-container:
+  extends: .container_job_template
+  variables:
+    NAME: emsdk-wasm64-cross
+    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg WASM64_MEMORY64=1
+    DOCKERFILE: emsdk-wasm-cross
+
+wasm64l-emsdk-cross-container:
+  extends: .container_job_template
+  variables:
+    NAME: emsdk-wasm64l-cross
+    BUILD_ARGS: --build-arg TARGET_CPU=wasm64 --build-arg WASM64_MEMORY64=2
+    DOCKERFILE: emsdk-wasm-cross
.gitlab-ci.d/container-template.yml +3 -1
index 4eec72f383..01ca840413 100644
@@ -10,12 +10,14 @@
     - export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/qemu/$NAME:latest"
     - docker login $CI_REGISTRY -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
     - until docker info; do sleep 1; done
+    - export DOCKERFILE_NAME=${DOCKERFILE:-$NAME}
   script:
     - echo "TAG:$TAG"
     - echo "COMMON_TAG:$COMMON_TAG"
     - docker build --tag "$TAG" --cache-from "$TAG" --cache-from "$COMMON_TAG"
       --build-arg BUILDKIT_INLINE_CACHE=1
-      -f "tests/docker/dockerfiles/$NAME.docker" "."
+      $BUILD_ARGS
+      -f "tests/docker/dockerfiles/$DOCKERFILE_NAME.docker" "."
     - docker push "$TAG"
   after_script:
     - docker logout
Signature · 1 line
2.43.0
Reviewed-by on v1 2/4
#4 lore raw

Re: [PATCH 2/4] configure: Enable to propagate -sMEMORY64 flag to Emscripten

In reply to Kohei Tokunaga
Quoted 13 lines · Kohei Tokunaga

Currently there are some engines that don't support wasm64 (e.g. unsupported on Safari[1]). To mitigate this issue, the configure script allows the user to use Emscripten's compatibility feature, "-sMEMORY64=2" flag[2].

Emscripten's "-sMEMORY64=2" flag still enables 64bit pointers in C code. But this flag lowers the output binary into wasm32, with limiting the maximum memory size to 4GB. So QEMU can run on wasm32 engines.

This commit adds "--wasm64-memory64" flag to the configure script. This takes the value to propagate to Emscripten's -sMEMORY64. 1(default) targets wasm64 engines and 2 targets wasm32 engines with still enabling 64bit pointers.

Quoted 7 lines

[1] https://webassembly.org/features/
[2] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

---
  configure | 10 +++++++++-
  1 file changed, 9 insertions(+), 1 deletion(-)

It could be worth adding the link to documentation in commit description directly in configure also. As well, the --wasm64-memory64 option help could explain that in a few words.

Reviewed-by on v1 4/4
#11 lore raw

Re: [PATCH 4/4] .gitlab-ci.d: Add build tests for wasm64

In reply to Kohei Tokunaga
Quoted 10 lines · Kohei Tokunaga

The wasm builds are tested for 3 targets: wasm32, wasm64(-sMEMORY64=1) and wasm64(-sMEMORY64=2). The CI builds the containers using the same Dockerfile (emsdk-wasm-cross.docker) with different build args.

---
  .gitlab-ci.d/buildtest.yml          | 24 +++++++++++++++++++++---
  .gitlab-ci.d/container-cross.yml    | 18 +++++++++++++++++-
  .gitlab-ci.d/container-template.yml |  4 +++-
  3 files changed, 41 insertions(+), 5 deletions(-)
Reviewed-by on v1 1/4
#2 lore raw

Re: [PATCH 1/4] meson: Add wasm64 support to the --cpu flag

In reply to Kohei Tokunaga
Quoted 8 lines · Kohei Tokunaga

wasm64 target enables 64bit pointers using Emscripten's -sMEMORY64=1 flag[1]. This enables QEMU to run 64bit guests.

Although the configure script uses "uname -m" as the fallback value when "cpu" is empty, this can't be used for Emscripten which targets to Wasm. So, in wasm build, this commit fixes configure to require --cpu flag to be explicitly specified by the user.

Quoted 7 lines

[1] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

---
  configure   | 6 +++++-
  meson.build | 4 ++--
  2 files changed, 7 insertions(+), 3 deletions(-)
#12 lore raw
In reply to Kohei Tokunaga
Quoted 101 lines · Kohei Tokunaga

This patch series enables the TCI of the Wasm build to run 64bit guests. Unlike the previous series[1], this patch series is implemented by adding support for WebAssembly's "wasm64" target which enables 64bit pointers.

In the previous discussion[2], the main challenge of using wasm64 was its limited adoption, particularly the lack of support in our dependency (libffi) and some engines such as Safari.

For libffi, I've completed the addition of wasm64 support upstream[3] so it can be used.

To support wasm32 engines, this patch uses Emscripten's compatibility feature, -sMEMORY64=2 flag[4]. This flag still enables 64bit pointers in the C code while Emscripten lowers the output binary to wasm32 and limits the maximum memory size to 4GB. As a result, QEMU can run on wasm32 engiens while still supporting 64bit guests.

# Overview of the build process

To compile QEMU with Emscripten, the following dependencies are required. The emsdk-wasm-cross.docker environment includes all necessary components and can be used as the build environment:

- Emscripten SDK (emsdk) v4.0.10
- Libraries cross-compiled with Emscripten (please see also emsdk-wasm-cross.docker for build steps)
- GLib v2.84.0
- zlib v1.3.1
- libffi v3.5.2
- Pixman v0.44.2

The configure script supports --cpu=wasm64 flag to compile QEMU with 64bit pointer support.

emconfigure ./configure --cpu=wasm64 \
                         --static --disable-tools \
                         --target-list=x86_64-softmmu \
                         --enable-tcg-interpreter

emmake make -j$(nproc)

If the output needs to run on wasm32 engines, use --wasm64-memory64=2 flag. This flag propagates the value to Emscripten's -sMEMORY64 flag[4].

emconfigure ./configure --cpu=wasm64 --wasm64-memory64=2 \
                         --static --disable-tools \
                         --target-list=x86_64-softmmu \
                         --enable-tcg-interpreter

emmake make -j$(nproc)

Either of the above commands generates the following files:

- qemu-system-x86_64.js
- qemu-system-x86_64.wasm

Guest images can be packaged using Emscripten's file_packager.py tool. For example, if the images are stored in a directory named "pack", the following command packages them, allowing QEMU to access them through Emscripten's virtual filesystem:

/path/to/file_packager.py qemu-system-x86_64.data --preload pack > load.js

This process generates the following files:

- qemu-system-x86_64.data
- load.js

Emscripten allows passing arguments to the QEMU command via the Module object in JavaScript:

Module['arguments'] = [

     '-nographic', '-m', '512M',
     '-L', 'pack/',
     '-drive', 'if=virtio,format=raw,file=pack/rootfs.bin',
     '-kernel', 'pack/bzImage',
     '-append', 'earlyprintk=ttyS0 console=ttyS0 root=/dev/vda loglevel=7',

];

The sample repository[5] (tcidev64 branch) provides a complete setup, including an HTML file that implements a terminal UI.

[1] https://lists.nongnu.org/archive/html/qemu-devel/2025-05/msg05376.html
[2] https://lists.nongnu.org/archive/html/qemu-devel/2025-04/msg01795.html
[3] https://github.com/libffi/libffi/pull/927
[4] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64
[5] https://github.com/ktock/qemu-wasm-sample/tree/tcidev64

Kohei Tokunaga (4):
meson: Add wasm64 support to the --cpu flag
configure: Enable to propagate -sMEMORY64 flag to Emscripten
dockerfiles: Add support for wasm64 to the wasm Dockerfile .gitlab-ci.d: Add build tests for wasm64

  .gitlab-ci.d/buildtest.yml                    | 24 +++++++++++++--
  .gitlab-ci.d/container-cross.yml              | 18 +++++++++++-
  .gitlab-ci.d/container-template.yml           |  4 ++-
  MAINTAINERS                                   |  2 +-
  configure                                     | 14 ++++++++-
  meson.build                                   |  4 +--
  ...2-cross.docker => emsdk-wasm-cross.docker} | 29 ++++++++++++++-----
  7 files changed, 79 insertions(+), 16 deletions(-)
Quoted 2 lines

rename tests/docker/dockerfiles/{emsdk-wasm32-cross.docker => emsdk-wasm-cross.docker} (85%)

Excellent, thanks for adding this.

Out of curiosity, and out of the scope of this PR, would that be possible to make a "universal" build, which can selectively select the appropriate wasm64 support at runtime, so a single build works on all browsers out of the box?

As well, what are the limitations of -sMEMORY64 regarding limited address space? Is it just the maximum size of memory a guest can have, or does it limit the VA that can be accessed also?

Thanks,
Pierrick

Reviewed-by on v1 3/4
#9 lore raw

Re: [PATCH 3/4] dockerfiles: Add support for wasm64 to the wasm Dockerfile

In reply to Kohei Tokunaga
Quoted 7 lines · Kohei Tokunaga

This commit fixes Dockerfile of the wasm build to support both of wasm32 and wasm64 build. Dockerfile takes the following build arguments and use these values for building dependencies.

- TARGET_CPU: target wasm arch (wasm32 or wasm64)
- WASM64_MEMORY64: target -sMEMORY64 mode (1 or 2)

Quoted 6 lines
---
  MAINTAINERS                                   |  2 +-
  ...2-cross.docker => emsdk-wasm-cross.docker} | 29 ++++++++++++++-----
  2 files changed, 23 insertions(+), 8 deletions(-)

rename tests/docker/dockerfiles/{emsdk-wasm32-cross.docker => emsdk-wasm-cross.docker} (85%)

#13 lore raw
In reply to Pierrick Bouvier

Hi Pierrick, thanks for your review.

Quoted 6 lines

Excellent, thanks for adding this.

Out of curiosity, and out of the scope of this PR, would that be possible to make a "universal" build, which can selectively select the appropriate wasm64 support at runtime, so a single build works on all browsers out of the box?

I haven't found an Emscripten feature for the universal build but a possible approach would be to compile both variants (-sMEMORY64=1 and 2) and provide a wrapper JS script that selects one at runtime depending on the engine's pointer size. If the user can accept the 4GB memory size limit, -sMEMORY64=2 can be used as a universal binary as it runs on wasm32 engines.

Quoted 3 lines

As well, what are the limitations of -sMEMORY64 regarding limited address space? Is it just the maximum size of memory a guest can have, or does it limit the VA that can be accessed also?

-sMEMORY64=2 limits the maximum memory size a guest can use but still enables 64bit pointers so TCI is compiled with TCG_TARGET_REG_BITS=64 without restricting the guest's virtual address space.

Regards,
Kohei

#5 lore raw

Re: [PATCH 2/4] configure: Enable to propagate -sMEMORY64 flag to Emscripten

In reply to Pierrick Bouvier

Hi Pierrick, thanks for the feedback.

Quoted 4 lines

It could be worth adding the link to documentation in commit description directly in configure also.
As well, the --wasm64-memory64 option help could explain that in a few words.

I'll add the explanation in the configure script in the next version of this patch series.

Regards,
Kohei

#6 lore raw

Re: [PATCH 2/4] configure: Enable to propagate -sMEMORY64 flag to Emscripten

In reply to Kohei Tokunaga

Hi Kohei,

Quoted 62 lines · Kohei Tokunaga

Currently there are some engines that don't support wasm64 (e.g. unsupported on Safari[1]). To mitigate this issue, the configure script allows the user to use Emscripten's compatibility feature, "-sMEMORY64=2" flag[2].

Emscripten's "-sMEMORY64=2" flag still enables 64bit pointers in C code. But this flag lowers the output binary into wasm32, with limiting the maximum memory size to 4GB. So QEMU can run on wasm32 engines.

This commit adds "--wasm64-memory64" flag to the configure script. This takes the value to propagate to Emscripten's -sMEMORY64. 1(default) targets wasm64 engines and 2 targets wasm32 engines with still enabling 64bit pointers.

[1] https://webassembly.org/features/
[2] https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

---
  configure | 10 +++++++++-
  1 file changed, 9 insertions(+), 1 deletion(-)
configure +7 -1
index 7f3893a42f..8573f84e26 100755
@@ -182,6 +182,8 @@ EXTRA_CXXFLAGS=""
  EXTRA_OBJCFLAGS=""
  EXTRA_LDFLAGS=""
 
+wasm64_memory64=1
+
  # Default value for a variable defining feature "foo".
  #  * foo="no"  feature will only be used if --enable-foo arg is given
  #  * foo=""    feature will be searched for, and if found, will be used
@@ -239,6 +241,8 @@ for opt do
    ;;
    --without-default-features) default_feature="no"
    ;;
+  --wasm64-memory64=*) wasm64_memory64="$optarg"
+  ;;
    esac
  done
 
@@ -537,7 +541,7 @@ case "$cpu" in
      CPU_CFLAGS="-m32"
      ;;
    wasm64)
-    CPU_CFLAGS="-m64 -sMEMORY64=1"
+    CPU_CFLAGS="-m64 -sMEMORY64=$wasm64_memory64"
      ;;
  esac
 
@@ -795,6 +799,8 @@ for opt do
    ;;
    --disable-rust) rust=disabled
    ;;
+  --wasm64-memory64=*)
+  ;;
    # everything else has the same name in configure and meson
    --*) meson_option_parse "$opt" "$optarg"
    ;;

configure Advanced options (experts only): · line 930

Quoted 5 lines
configure +2 -0
@@ -920,6 +926,8 @@ Advanced options (experts only):
    --disable-containers     don't use containers for cross-building
    --container-engine=TYPE  which container engine to use [$container_engine]
    --gdb=GDB-path           gdb to use for gdbstub tests [$gdb_bin]
+  --wasm64-memory64        Used only for wasm64 build. Set -sMEMORY64 of
+                           Emscripten to 1(default) or 2 (choices: 1/2)

I wouldn't expose "1" or "2" to the users. Instead, keep 1 as internal default, and provide the --wasm64-32bit-address-limit option which sets internal value to 2. Configure help could be:

--wasm64-32bit-address-limit Restrict wasm64 address space to
32-bit (default is to use the whole 64-bit range).

WDYT?

#7 lore raw

Re: [PATCH 2/4] configure: Enable to propagate -sMEMORY64 flag to Emscripten

Hi Philippe,

Thanks for the suggestion.

Quoted 2 lines · Kohei Tokunaga
Quoted 1 line

Currently there are some engines that don't support wasm64 (e.g.

unsupported

Quoted 1 line
Quoted 1 line

on Safari[1]). To mitigate this issue, the configure script allows the

user

Quoted 3 lines
Quoted 3 lines

to use Emscripten's compatibility feature, "-sMEMORY64=2" flag[2].

Emscripten's "-sMEMORY64=2" flag still enables 64bit pointers in C

code. But

Quoted 1 line
Quoted 1 line

this flag lowers the output binary into wasm32, with limiting the

maximum

Quoted 4 lines
Quoted 4 lines

memory size to 4GB. So QEMU can run on wasm32 engines.

This commit adds "--wasm64-memory64" flag to the configure script. This takes the value to propagate to Emscripten's -sMEMORY64. 1(default)

targets

Quoted 5 lines
Quoted 5 lines

wasm64 engines and 2 targets wasm32 engines with still enabling 64bit pointers.

[1] https://webassembly.org/features/
[2]

https://emscripten.org/docs/tools_reference/settings_reference.html#memory64

Quoted 14 lines
Quoted 14 lines
---
  configure | 10 +++++++++-
  1 file changed, 9 insertions(+), 1 deletion(-)
configure +0 -0
index 7f3893a42f..8573f84e26 100755
@@ -182,6 +182,8 @@ EXTRA_CXXFLAGS=""
  EXTRA_OBJCFLAGS=""
  EXTRA_LDFLAGS=""
 
Quoted 5 lines

configure EXTRA_CXXFLAGS=""

Quoted 5 lines
configure +2 -0
+wasm64_memory64=1
+
  # Default value for a variable defining feature "foo".
  #  * foo="no"  feature will only be used if --enable-foo arg is given
  #  * foo=""    feature will be searched for, and if found, will be

used

Quoted 18 lines
Quoted 18 lines
configure +3 -1
@@ -239,6 +241,8 @@ for opt do
    ;;
    --without-default-features) default_feature="no"
    ;;
+  --wasm64-memory64=*) wasm64_memory64="$optarg"
+  ;;
    esac
  done
 
@@ -537,7 +541,7 @@ case "$cpu" in
      CPU_CFLAGS="-m32"
      ;;
    wasm64)
-    CPU_CFLAGS="-m64 -sMEMORY64=1"
+    CPU_CFLAGS="-m64 -sMEMORY64=$wasm64_memory64"
      ;;
  esac
 
Quoted 12 lines

configure Advanced options (experts only): · line 927

Quoted 12 lines
configure +2 -0
@@ -795,6 +799,8 @@ for opt do
    ;;
    --disable-rust) rust=disabled
    ;;
+  --wasm64-memory64=*)
+  ;;
    # everything else has the same name in configure and meson
    --*) meson_option_parse "$opt" "$optarg"
    ;;
@@ -920,6 +926,8 @@ Advanced options (experts only):
    --disable-containers     don't use containers for cross-building
    --container-engine=TYPE  which container engine to use

[$container_engine]

Quoted 2 lines

configure Advanced options (experts only): · line 929

Quoted 2 lines
configure +1 -0
    --gdb=GDB-path           gdb to use for gdbstub tests [$gdb_bin]
+  --wasm64-memory64        Used only for wasm64 build. Set -sMEMORY64

of

Quoted 11 lines

configure Advanced options (experts only): · line 930

Quoted 1 line
configure +1 -0
+                           Emscripten to 1(default) or 2 (choices: 1/2)

I wouldn't expose "1" or "2" to the users. Instead, keep 1 as internal default, and provide the --wasm64-32bit-address-limit option which sets internal value to 2. Configure help could be:

--wasm64-32bit-address-limit Restrict wasm64 address space to
32-bit (default is to use the whole 64-bit range).

WDYT?

It looks good to me. I'll update the patch.

Regards,
Kohei