Patch review
cover Patch review
Please review this set of changes for scarthgap and have comments back by end of day Tuesday, November 25
Passed a-full on autobuilder:
https://autobuilder.yoctoproject.org/valkyrie/#/builders/29/builds/2755
The following changes since commit 471adaa5f77fa3b974eab60a2ded48e360042828:
build-appliance-image: Update to scarthgap head revision (2025-11-17 17:00:25 -0800)
are available in the Git repository at:
https://git.openembedded.org/openembedded-core-contrib stable/scarthgap-nut
https://git.openembedded.org/openembedded-core-contrib/log/?h=stable/scarthgap-nut
Alexander Kanavin (1):
goarch.bbclass: do not leak TUNE_FEATURES into crosssdk task
signatures
Gyorgy Sarvari (2):
musl: patch CVE-2025-26519
glslang: fix compiling with gcc15
Hongxu Jia (1):
spdx30: Provide software_packageUrl field in SPDX 3.0 SBOM
Hugo SIMELIERE (1):
sqlite3: patch CVE-2025-7709
Osama Abdelkader (3):
go: add sdk test
go: extend runtime test
go: remove duplicate arch map in sdk test
Ovidiu Panait (1):
rust-target-config: fix nativesdk-libstd-rs build with baremetal
Peter Marko (4):
spdx30: fix cve status for patch files in VEX
oeqa: fix package detection in go sdk tests
oeqa: drop unnecessary dependency from go runtime tests oeqa/sdk/buildepoxy: skip test in eSDK
Ross Burton (5):
xserver-xorg: remove redundant patch
xserver-xorg: fix CVE-2025-62229 CVE-2025-62230 CVE-2025-62231
testsdk: allow user to specify which tests to run oe/sdk: fix empty SDK manifests
lib/oe/go: document map_arch, and raise an error on unknown
architecture
Yogita Urade (3):
xwayland: fix CVE-2025-62229
xwayland: fix CVE-2025-62230
xwayland: fix CVE-2025-62231
meta/classes-recipe/goarch.bbclass | 3 + .../classes-recipe/rust-target-config.bbclass | 3 +- meta/classes-recipe/testsdk.bbclass | 3 + meta/classes/create-spdx-3.0.bbclass | 5 + meta/lib/oe/go.py | 6 +- meta/lib/oe/sdk.py | 3 +- meta/lib/oe/spdx30_tasks.py | 16 ++- meta/lib/oeqa/files/test.go | 7 ++ meta/lib/oeqa/runtime/cases/go.py | 66 +++++++++++ meta/lib/oeqa/sdk/cases/buildepoxy.py | 4 + meta/lib/oeqa/sdk/cases/go.py | 107 ++++++++++++++++++ meta/lib/oeqa/sdk/testsdk.py | 3 +- meta/lib/oeqa/sdkext/testsdk.py | 3 +- .../musl/musl/CVE-2025-26519-1.patch | 39 +++++++ .../musl/musl/CVE-2025-26519-2.patch | 38 +++++++ meta/recipes-core/musl/musl_git.bb | 4 +- ...uilder.h-add-missing-cstdint-include.patch | 30 +++++ .../glslang/glslang_1.3.275.0.bb | 1 + ...-duplicate-definitions-of-IOPortBase.patch | 28 ----- ...after-free-in-present_create_notifie.patch | 91 +++++++++++++++ ...ke-the-RT_XKBCLIENT-resource-private.patch | 63 +++++++++++ ...KB-resource-when-freeing-XkbInterest.patch | 92 +++++++++++++++ ...-Prevent-overflow-in-XkbSetCompatMap.patch | 53 +++++++++ .../xorg-xserver/xserver-xorg_21.1.18.bb | 7 +- .../xwayland/xwayland/CVE-2025-62229.patch | 89 +++++++++++++++ .../xwayland/CVE-2025-62230-0001.patch | 60 ++++++++++ .../xwayland/CVE-2025-62230-0002.patch | 89 +++++++++++++++ .../xwayland/xwayland/CVE-2025-62231.patch | 50 ++++++++ .../xwayland/xwayland_23.2.5.bb | 4 + .../sqlite/sqlite3/CVE-2025-7709.patch | 33 ++++++ meta/recipes-support/sqlite/sqlite3_3.45.3.bb | 1 + 31 files changed, 964 insertions(+), 37 deletions(-) create mode 100644 meta/lib/oeqa/files/test.go create mode 100644 meta/lib/oeqa/sdk/cases/go.py create mode 100644 meta/recipes-core/musl/musl/CVE-2025-26519-1.patch create mode 100644 meta/recipes-core/musl/musl/CVE-2025-26519-2.patch create mode 100644 meta/recipes-graphics/glslang/glslang/0001-SPIRV-SpvBuilder.h-add-missing-cstdint-include.patch delete mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0001-Avoid-duplicate-definitions-of-IOPortBase.patch create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0001-present-Fix-use-after-free-in-present_create_notifie.patch create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0002-xkb-Make-the-RT_XKBCLIENT-resource-private.patch create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0003-xkb-Free-the-XKB-resource-when-freeing-XkbInterest.patch create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0004-xkb-Prevent-overflow-in-XkbSetCompatMap.patch create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62229.patch create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62230-0001.patch create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62230-0002.patch create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62231.patch create mode 100644 meta/recipes-support/sqlite/sqlite3/CVE-2025-7709.patch
Signature · 1 line
2.43.0
PATCH 1/21 spdx30: fix cve status for patch files in VEX
From: Peter Marko <[email protected]>
This commit fixes commit 08595b39b46ef2bf3a928d4528292ee31a990c98 which adapts vex creation between function create_spdx where all changes were backported and funtion get_patched_cves where changes were not backported.
CVE patches were previously ignored as they cannot be decoded fromCVE_STATUS variables and each caused a warning like:
WARNING: ncurses-native-6.4-r0 do_create_spdx: Skipping CVE-2023-50495 — missing or unknown CVE status
Master branch uses fix-file-included for CVE patches however since cve-check-map.conf was not part of spdx-3.0 backport, closest one available (backported-patch) was implemented.
--- meta/lib/oe/spdx30_tasks.py | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
meta/lib/oe/spdx30_tasks.py +7 -1
@@ -503,7 +503,13 @@ def create_spdx(d): if include_vex != "none": patched_cves = oe.cve_check.get_patched_cves(d) for cve_id in patched_cves: - mapping, detail, description = oe.cve_check.decode_cve_status(d, cve_id) + # decode_cve_status is decoding CVE_STATUS, so patch files need to be hardcoded + if cve_id in (d.getVarFlags("CVE_STATUS") or {}): + mapping, detail, description = oe.cve_check.decode_cve_status(d, cve_id) + else: + mapping = "Patched" + detail = "backported-patch" # fix-file-included is not available in scarthgap + description = None if not mapping or not detail: bb.warn(f"Skipping {cve_id} — missing or unknown CVE status")
Signature · 1 line
2.43.0
PATCH 2/21 spdx30: Provide software_packageUrl field in SPDX 3.0 SBOM
In reply to Steve SakomanFrom: Hongxu Jia <[email protected]>
Define var-SPDX_PACKAGE_URL to provide software_packageUrl field [1][2] in SPDX 3.0 SBOM, support to override with package name SPDX_PACKAGE_URL:<pkgname>
Currently, the format of purl is not defined in Yocto, set empty for now until we have a comprehensive plan for what Yocto purls look like. But users could customize their own purl by setting var-SPDX_PACKAGE_URL
[1] https://spdx.github.io/spdx-spec/v3.0.1/model/Software/Properties/packageUrl/
[2] https://spdx.github.io/spdx-spec/v3.0.1/annexes/pkg-url-specification/
(From OE-Core rev: c8e6953a0b6f59ffca994c440069db39e60b12d2)
--- meta/classes/create-spdx-3.0.bbclass | 5 +++++ meta/lib/oe/spdx30_tasks.py | 8 ++++++++ 2 files changed, 13 insertions(+)
meta/classes/create-spdx-3.0.bbclass +5 -0
@@ -117,6 +117,11 @@ SPDX_PACKAGE_VERSION ??= "${PV}" SPDX_PACKAGE_VERSION[doc] = "The version of a package, software_packageVersion \ in software_Package" +SPDX_PACKAGE_URL ??= "" +SPDX_PACKAGE_URL[doc] = "Provides a place for the SPDX data creator to record \ +the package URL string (in accordance with the Package URL specification) for \ +a software Package." + IMAGE_CLASSES:append = " create-spdx-image-3.0" SDK_CLASSES += "create-spdx-sdk-3.0"
meta/lib/oe/spdx30_tasks.py +8 -0
@@ -632,6 +632,14 @@ def create_spdx(d): set_var_field("SUMMARY", spdx_package, "summary", package=package) set_var_field("DESCRIPTION", spdx_package, "description", package=package) + if d.getVar("SPDX_PACKAGE_URL:%s" % package) or d.getVar("SPDX_PACKAGE_URL"): + set_var_field( + "SPDX_PACKAGE_URL", + spdx_package, + "software_packageUrl", + package=package + ) + pkg_objset.new_scoped_relationship( [oe.sbom30.get_element_link_id(build)], oe.spdx30.RelationshipType.hasOutput,
Signature · 1 line
2.43.0
PATCH 3/21 sqlite3: patch CVE-2025-7709
In reply to Steve SakomanFrom: Hugo SIMELIERE <[email protected]>
Pick commit used in debian patch https://git.launchpad.net/ubuntu/+source/sqlite3/commit/?id=9a309a50fa99e3b69623894bfd7d1f84d9fab33c
Upstream-Status: Backport [https://github.com/sqlite/sqlite/commit/192d0ff8ccf0bf55776a5930cdc64e25f87299d6]
--- .../sqlite/sqlite3/CVE-2025-7709.patch | 33 +++++++++++++++++++ meta/recipes-support/sqlite/sqlite3_3.45.3.bb | 1 + 2 files changed, 34 insertions(+) create mode 100644 meta/recipes-support/sqlite/sqlite3/CVE-2025-7709.patch
meta/recipes-support/sqlite/sqlite3/CVE-2025-7709.patch new file +33 -0
@@ -0,0 +1,33 @@ +From a7ed2fcba8ef1df4bcd846d895469ca72542be07 Mon Sep 17 00:00:00 2001 +From: Hugo SIMELIERE <[email protected]> +Date: Fri, 14 Nov 2025 15:31:17 +0100 +Subject: [PATCH] Optimize allocation of large tombstone arrays in fts5. + +FossilOrigin-Name: 0fcc3cbdfa21adf97aed01fa76991cccf9380e2755b0182a9e2c94e3c8fb38d7 + +CVE: CVE-2025-7709 +Upstream-Status: Backport [https://github.com/sqlite/sqlite/commit/192d0ff8ccf0bf55776a5930cdc64e25f87299d6] +Signed-off-by: Hugo SIMELIERE <[email protected]> +--- + sqlite3.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/sqlite3.c b/sqlite3.c +index 1ee8de4..43f59e2 100644 +--- a/sqlite3.c ++++ b/sqlite3.c +@@ -240724,9 +240724,9 @@ static void fts5SegIterSetNext(Fts5Index *p, Fts5SegIter *pIter){ + ** leave an error in the Fts5Index object. + */ + static void fts5SegIterAllocTombstone(Fts5Index *p, Fts5SegIter *pIter){ +- const int nTomb = pIter->pSeg->nPgTombstone; ++ const i64 nTomb = (i64)pIter->pSeg->nPgTombstone; + if( nTomb>0 ){ +- int nByte = nTomb * sizeof(Fts5Data*) + sizeof(Fts5TombstoneArray); ++ i64 nByte = nTomb * sizeof(Fts5Data*) + sizeof(Fts5TombstoneArray); + Fts5TombstoneArray *pNew; + pNew = (Fts5TombstoneArray*)sqlite3Fts5MallocZero(&p->rc, nByte); + if( pNew ){ +-- +2.43.0 +
meta/recipes-support/sqlite/sqlite3_3.45.3.bb +1 -0
@@ -7,6 +7,7 @@ SRC_URI = "http://www.sqlite.org/2024/sqlite-autoconf-${SQLITE_PV}.tar.gz \ file://CVE-2025-3277.patch \ file://CVE-2025-29088.patch \ file://CVE-2025-6965.patch \ + file://CVE-2025-7709.patch \ " SRC_URI[sha256sum] = "b2809ca53124c19c60f42bf627736eae011afdcc205bb48270a5ee9a38191531"
Signature · 1 line
2.43.0
PATCH 4/21 xserver-xorg: remove redundant patch
In reply to Steve SakomanFrom: Ross Burton <[email protected]>
The underlying issue with -fno-common was resolved upstream in xserver 21.1.0 onwards[1].
[1] xserver 0148a15da ("compiler.h: don't define inb/outb and friends on mips")
(From OE-Core rev: 74b77ee90efd50a703af76769fac66a0f7c394ca)
--- ...-duplicate-definitions-of-IOPortBase.patch | 28 ------------------- .../xorg-xserver/xserver-xorg_21.1.18.bb | 4 +-- 2 files changed, 1 insertion(+), 31 deletions(-) delete mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0001-Avoid-duplicate-definitions-of-IOPortBase.patch
meta/recipes-graphics/xorg-xserver/xserver-xorg/0001-Avoid-duplicate-definitions-of-IOPortBase.patch deleted +0 -28
@@ -1,28 +0,0 @@ -From cedc797e1a0850039a25b7e387b342e54fffcc97 Mon Sep 17 00:00:00 2001 -From: Khem Raj <[email protected]> -Date: Mon, 17 Aug 2020 10:50:51 -0700 -Subject: [PATCH] Avoid duplicate definitions of IOPortBase - -This fixed build with gcc10/-fno-common - -Fixes -compiler.h:528: multiple definition of `IOPortBase'; - -Upstream-Status: Pending -Signed-off-by: Khem Raj <[email protected]> ---- - hw/xfree86/os-support/linux/lnx_video.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/hw/xfree86/os-support/linux/lnx_video.c b/hw/xfree86/os-support/linux/lnx_video.c -index fd83022..1d0d96e 100644 ---- a/hw/xfree86/os-support/linux/lnx_video.c -+++ b/hw/xfree86/os-support/linux/lnx_video.c -@@ -78,6 +78,7 @@ xf86OSInitVidMem(VidMemInfoPtr pVidMem) - /***************************************************************************/ - /* I/O Permissions section */ - /***************************************************************************/ -+_X_EXPORT unsigned int IOPortBase; /* Memory mapped I/O port area */ - - #if defined(__powerpc__) - volatile unsigned char *ioBase = NULL;
meta/recipes-graphics/xorg-xserver/xserver-xorg_21.1.18.bb +1 -3
@@ -1,8 +1,6 @@ require xserver-xorg.inc -SRC_URI += "file://0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch \ - file://0001-Avoid-duplicate-definitions-of-IOPortBase.patch \ - " +SRC_URI += "file://0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch" SRC_URI[sha256sum] = "c878d1930d87725d4a5bf498c24f4be8130d5b2646a9fd0f2994deff90116352" # These extensions are now integrated into the server, so declare the migration
Signature · 1 line
2.43.0
PATCH 5/21 xserver-xorg: fix CVE-2025-62229 CVE-2025-62230 CVE-2025-62231
In reply to Steve SakomanFrom: Ross Burton <[email protected]>
Quoted 1 line
From https://lists.x.org/archives/xorg-announce/2025-October/003635.html:
1) CVE-2025-62229: Use-after-free in XPresentNotify structures creation
Using the X11 Present extension, when processing and adding the notifications after presenting a pixmap, if an error occurs, a dangling pointer may be left in the error code path of the function causing a use-after-free when eventually destroying the notification structures later.
Introduced in: Xorg 1.15
Fixed in: xorg-server-21.1.19 and xwayland-24.1.9
Fix: https://gitlab.freedesktop.org/xorg/xserver/-/commit/5a4286b1
Found by: Jan-Niklas Sohn working with Trend Micro Zero Day Initiative.
2) CVE-2025-62230: Use-after-free in Xkb client resource removal
When removing the Xkb resources for a client, the function XkbRemoveResourceClient() will free the XkbInterest data associated with the device, but not the resource associated with it.
As a result, when the client terminates, the resource delete function triggers a use-after-free.
Introduced in: X11R6
Fixed in: xorg-server-21.1.19 and xwayland-24.1.9
Fix: https://gitlab.freedesktop.org/xorg/xserver/-/commit/99790a2c
https://gitlab.freedesktop.org/xorg/xserver/-/commit/10c94238
Found by: Jan-Niklas Sohn working with Trend Micro Zero Day Initiative.
3) CVE-2025-62231: Value overflow in Xkb extension XkbSetCompatMap()
The XkbCompatMap structure stores some of its values using an unsigned short, but fails to check whether the sum of the input data might overflow the maximum unsigned short value.
Introduced in: X11R6
Fixed in: xorg-server-21.1.19 and xwayland-24.1.9
Fix: https://gitlab.freedesktop.org/xorg/xserver/-/commit/475d9f49
Found by: Jan-Niklas Sohn working with Trend Micro Zero Day Initiative.
(From OE-Core rev: 50b9c34ba932761fab9035a54e58466d72b097bf)
--- ...after-free-in-present_create_notifie.patch | 91 ++++++++++++++++++ ...ke-the-RT_XKBCLIENT-resource-private.patch | 63 +++++++++++++ ...KB-resource-when-freeing-XkbInterest.patch | 92 +++++++++++++++++++ ...-Prevent-overflow-in-XkbSetCompatMap.patch | 53 +++++++++++ .../xorg-xserver/xserver-xorg_21.1.18.bb | 7 +- 5 files changed, 305 insertions(+), 1 deletion(-) create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0001-present-Fix-use-after-free-in-present_create_notifie.patch create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0002-xkb-Make-the-RT_XKBCLIENT-resource-private.patch create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0003-xkb-Free-the-XKB-resource-when-freeing-XkbInterest.patch create mode 100644 meta/recipes-graphics/xorg-xserver/xserver-xorg/0004-xkb-Prevent-overflow-in-XkbSetCompatMap.patch
meta/recipes-graphics/xorg-xserver/xserver-xorg/0001-present-Fix-use-after-free-in-present_create_notifie.patch new file +91 -0
@@ -0,0 +1,91 @@ +From 359c9c0478406fe00e0d4c5d52bd9bf8c2ca4081 Mon Sep 17 00:00:00 2001 +From: Olivier Fourdan <[email protected]> +Date: Wed, 2 Jul 2025 09:46:22 +0200 +Subject: [PATCH 1/4] present: Fix use-after-free in present_create_notifies() + +Using the Present extension, if an error occurs while processing and +adding the notifications after presenting a pixmap, the function +present_create_notifies() will clean up and remove the notifications +it added. + +However, there are two different code paths that can lead to an error +creating the notify, one being before the notify is being added to the +list, and another one after the notify is added. + +When the error occurs before it's been added, it removes the elements up +to the last added element, instead of the actual number of elements +which were added. + +As a result, in case of error, as with an invalid window for example, it +leaves a dangling pointer to the last element, leading to a use after +free case later: + + | Invalid write of size 8 + | at 0x5361D5: present_clear_window_notifies (present_notify.c:42) + | by 0x534A56: present_destroy_window (present_screen.c:107) + | by 0x41E441: xwl_destroy_window (xwayland-window.c:1959) + | by 0x4F9EC9: compDestroyWindow (compwindow.c:622) + | by 0x51EAC4: damageDestroyWindow (damage.c:1592) + | by 0x4FDC29: DbeDestroyWindow (dbe.c:1291) + | by 0x4EAC55: FreeWindowResources (window.c:1023) + | by 0x4EAF59: DeleteWindow (window.c:1091) + | by 0x4DE59A: doFreeResource (resource.c:890) + | by 0x4DEFB2: FreeClientResources (resource.c:1156) + | by 0x4A9AFB: CloseDownClient (dispatch.c:3567) + | by 0x5DCC78: ClientReady (connection.c:603) + | Address 0x16126200 is 16 bytes inside a block of size 2,048 free'd + | at 0x4841E43: free (vg_replace_malloc.c:989) + | by 0x5363DD: present_destroy_notifies (present_notify.c:111) + | by 0x53638D: present_create_notifies (present_notify.c:100) + | by 0x5368E9: proc_present_pixmap_common (present_request.c:164) + | by 0x536A7D: proc_present_pixmap (present_request.c:189) + | by 0x536FA9: proc_present_dispatch (present_request.c:337) + | by 0x4A1E4E: Dispatch (dispatch.c:561) + | by 0x4B00F1: dix_main (main.c:284) + | by 0x42879D: main (stubmain.c:34) + | Block was alloc'd at + | at 0x48463F3: calloc (vg_replace_malloc.c:1675) + | by 0x5362A1: present_create_notifies (present_notify.c:81) + | by 0x5368E9: proc_present_pixmap_common (present_request.c:164) + | by 0x536A7D: proc_present_pixmap (present_request.c:189) + | by 0x536FA9: proc_present_dispatch (present_request.c:337) + | by 0x4A1E4E: Dispatch (dispatch.c:561) + | by 0x4B00F1: dix_main (main.c:284) + | by 0x42879D: main (stubmain.c:34) + +To fix the issue, count and remove the actual number of notify elements +added in case of error. + +CVE-2025-62229, ZDI-CAN-27238 + +This vulnerability was discovered by: +Jan-Niklas Sohn working with Trend Micro Zero Day Initiative + +Signed-off-by: Olivier Fourdan <[email protected]> +(cherry picked from commit 5a4286b13f631b66c20f5bc8db7b68211dcbd1d0) + +Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/2087> + +CVE: CVE-2025-62229 +Upstream-Status: Backport +Signed-off-by: Ross Burton <[email protected]> +--- + present/present_notify.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/present/present_notify.c b/present/present_notify.c +index 445954998..00b3b68bd 100644 +--- a/present/present_notify.c ++++ b/present/present_notify.c +@@ -90,7 +90,7 @@ present_create_notifies(ClientPtr client, int num_notifies, xPresentNotify *x_no + if (status != Success) + goto bail; + +- added = i; ++ added++; + } + return Success; + +-- +2.43.0 +
meta/recipes-graphics/xorg-xserver/xserver-xorg/0002-xkb-Make-the-RT_XKBCLIENT-resource-private.patch new file +63 -0
63 lines not on this page · raw message
meta/recipes-graphics/xorg-xserver/xserver-xorg/0003-xkb-Free-the-XKB-resource-when-freeing-XkbInterest.patch new file +92 -0
92 lines not on this page · raw message
meta/recipes-graphics/xorg-xserver/xserver-xorg/0004-xkb-Prevent-overflow-in-XkbSetCompatMap.patch new file +53 -0
53 lines not on this page · raw message
meta/recipes-graphics/xorg-xserver/xserver-xorg_21.1.18.bb +6 -1
@@ -1,6 +1,11 @@ require xserver-xorg.inc -SRC_URI += "file://0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch" +SRC_URI += "file://0001-xf86pciBus.c-use-Intel-ddx-only-for-pre-gen4-hardwar.patch \ + file://0001-present-Fix-use-after-free-in-present_create_notifie.patch \ + file://0002-xkb-Make-the-RT_XKBCLIENT-resource-private.patch \ + file://0003-xkb-Free-the-XKB-resource-when-freeing-XkbInterest.patch \ + file://0004-xkb-Prevent-overflow-in-XkbSetCompatMap.patch \ + " SRC_URI[sha256sum] = "c878d1930d87725d4a5bf498c24f4be8130d5b2646a9fd0f2994deff90116352" # These extensions are now integrated into the server, so declare the migration
Signature · 1 line
2.43.0
PATCH 6/21 xwayland: fix CVE-2025-62229
In reply to Steve SakomanFrom: Yogita Urade <[email protected]>
A flaw was found in the X.Org X server and Xwayland when processing X11 Present extension notifications. Improper error handling during notification creation can leave dangling pointers that lead to a use-after-free condition. This can cause memory corruption or a crash, potentially allowing an attacker to execute arbitrary code or cause a denial of service.
Reference:
https://nvd.nist.gov/vuln/detail/CVE-2025-62229
Upstream patch:
https://gitlab.freedesktop.org/xorg/xserver/-/commit/5a4286b13f631b66c20f5bc8db7b68211dcbd1d0
--- .../xwayland/xwayland/CVE-2025-62229.patch | 89 +++++++++++++++++++ .../xwayland/xwayland_23.2.5.bb | 1 + 2 files changed, 90 insertions(+) create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62229.patch
meta/recipes-graphics/xwayland/xwayland/CVE-2025-62229.patch new file +89 -0
@@ -0,0 +1,89 @@ +From 5a4286b13f631b66c20f5bc8db7b68211dcbd1d0 Mon Sep 17 00:00:00 2001 +From: Olivier Fourdan <[email protected]> +Date: Wed, 2 Jul 2025 09:46:22 +0200 +Subject: [PATCH] present: Fix use-after-free in present_create_notifies() + +Using the Present extension, if an error occurs while processing and +adding the notifications after presenting a pixmap, the function +present_create_notifies() will clean up and remove the notifications +it added. + +However, there are two different code paths that can lead to an error +creating the notify, one being before the notify is being added to the +list, and another one after the notify is added. + +When the error occurs before it's been added, it removes the elements up +to the last added element, instead of the actual number of elements +which were added. + +As a result, in case of error, as with an invalid window for example, it +leaves a dangling pointer to the last element, leading to a use after +free case later: + + | Invalid write of size 8 + | at 0x5361D5: present_clear_window_notifies (present_notify.c:42) + | by 0x534A56: present_destroy_window (present_screen.c:107) + | by 0x41E441: xwl_destroy_window (xwayland-window.c:1959) + | by 0x4F9EC9: compDestroyWindow (compwindow.c:622) + | by 0x51EAC4: damageDestroyWindow (damage.c:1592) + | by 0x4FDC29: DbeDestroyWindow (dbe.c:1291) + | by 0x4EAC55: FreeWindowResources (window.c:1023) + | by 0x4EAF59: DeleteWindow (window.c:1091) + | by 0x4DE59A: doFreeResource (resource.c:890) + | by 0x4DEFB2: FreeClientResources (resource.c:1156) + | by 0x4A9AFB: CloseDownClient (dispatch.c:3567) + | by 0x5DCC78: ClientReady (connection.c:603) + | Address 0x16126200 is 16 bytes inside a block of size 2,048 free'd + | at 0x4841E43: free (vg_replace_malloc.c:989) + | by 0x5363DD: present_destroy_notifies (present_notify.c:111) + | by 0x53638D: present_create_notifies (present_notify.c:100) + | by 0x5368E9: proc_present_pixmap_common (present_request.c:164) + | by 0x536A7D: proc_present_pixmap (present_request.c:189) + | by 0x536FA9: proc_present_dispatch (present_request.c:337) + | by 0x4A1E4E: Dispatch (dispatch.c:561) + | by 0x4B00F1: dix_main (main.c:284) + | by 0x42879D: main (stubmain.c:34) + | Block was alloc'd at + | at 0x48463F3: calloc (vg_replace_malloc.c:1675) + | by 0x5362A1: present_create_notifies (present_notify.c:81) + | by 0x5368E9: proc_present_pixmap_common (present_request.c:164) + | by 0x536A7D: proc_present_pixmap (present_request.c:189) + | by 0x536FA9: proc_present_dispatch (present_request.c:337) + | by 0x4A1E4E: Dispatch (dispatch.c:561) + | by 0x4B00F1: dix_main (main.c:284) + | by 0x42879D: main (stubmain.c:34) + +To fix the issue, count and remove the actual number of notify elements +added in case of error. + +CVE-2025-62229, ZDI-CAN-27238 + +This vulnerability was discovered by: +Jan-Niklas Sohn working with Trend Micro Zero Day Initiative + +Signed-off-by: Olivier Fourdan <[email protected]> +Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/2086> + +CVE: CVE-2025-62229 +Upstream-Status: Backport [https://gitlab.freedesktop.org/xorg/xserver/-/commit/5a4286b13f631b66c20f5bc8db7b68211dcbd1d0] + +Signed-off-by: Yogita Urade <[email protected]> +--- + present/present_notify.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/present/present_notify.c b/present/present_notify.c +index 4459549..00b3b68 100644 +--- a/present/present_notify.c ++++ b/present/present_notify.c +@@ -90,7 +90,7 @@ present_create_notifies(ClientPtr client, int num_notifies, xPresentNotify *x_no + if (status != Success) + goto bail; + +- added = i; ++ added++; + } + return Success; + +-- +2.40.0
meta/recipes-graphics/xwayland/xwayland_23.2.5.bb +1 -0
@@ -31,6 +31,7 @@ SRC_URI = "https://www.x.org/archive/individual/xserver/xwayland-${PV}.tar.xz \ file://CVE-2025-49178.patch \ file://CVE-2025-49179.patch \ file://CVE-2025-49180.patch \ + file://CVE-2025-62229.patch \ " SRC_URI[sha256sum] = "33ec7ff2687a59faaa52b9b09aa8caf118e7ecb6aed8953f526a625ff9f4bd90"
Signature · 1 line
2.43.0
PATCH 7/21 xwayland: fix CVE-2025-62230
In reply to Steve SakomanFrom: Yogita Urade <[email protected]>
A flaw was discovered in the X.Org X serverâ\x80\x99s X Keyboard (Xkb) extension when handling client resource cleanup. The software frees certain data structures without properly detaching related resources, leading to a use-after-free condition. This can cause memory corruption or a crash when affected clients disconnect.
Reference:
https://gitlab.freedesktop.org/xorg/xserver/-/commit/3baad99f9c15028ed8c3e3d8408e5ec35db155aa
Upstream patches:
https://gitlab.freedesktop.org/xorg/xserver/-/commit/865089ca70840c0f13a61df135f7b44a9782a175
https://gitlab.freedesktop.org/xorg/xserver/-/commit/87fe2553937a99fd914ad0cde999376a3adc3839
--- .../xwayland/CVE-2025-62230-0001.patch | 60 +++++++++++++ .../xwayland/CVE-2025-62230-0002.patch | 89 +++++++++++++++++++ .../xwayland/xwayland_23.2.5.bb | 2 + 3 files changed, 151 insertions(+) create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62230-0001.patch create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62230-0002.patch
meta/recipes-graphics/xwayland/xwayland/CVE-2025-62230-0001.patch new file +60 -0
@@ -0,0 +1,60 @@ +From 865089ca70840c0f13a61df135f7b44a9782a175 Mon Sep 17 00:00:00 2001 +From: Olivier Fourdan <[email protected]> +Date: Wed, 10 Sep 2025 15:55:06 +0200 +Subject: [PATCH] xkb: Make the RT_XKBCLIENT resource private + +Currently, the resource in only available to the xkb.c source file. + +In preparation for the next commit, to be able to free the resources +from XkbRemoveResourceClient(), make that variable private instead. + +This is related to: + +CVE-2025-62230, ZDI-CAN-27545 + +This vulnerability was discovered by: +Jan-Niklas Sohn working with Trend Micro Zero Day Initiative + +Signed-off-by: Olivier Fourdan <[email protected]> +Reviewed-by: Michel Dänzer <[email protected]> +(cherry picked from commit 99790a2c9205a52fbbec01f21a92c9b7f4ed1d8f) + +Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/2087> + +CVE: CVE-2025-62230 +Upstream-Status: Backport [https://gitlab.freedesktop.org/xorg/xserver/-/commit/865089ca70840c0f13a61df135f7b44a9782a175] + +Signed-off-by: Yogita Urade <[email protected]> +--- + include/xkbsrv.h | 2 ++ + xkb/xkb.c | 2 +- + 2 files changed, 3 insertions(+), 1 deletion(-) + +diff --git a/include/xkbsrv.h b/include/xkbsrv.h +index 21cd876..24fdfb4 100644 +--- a/include/xkbsrv.h ++++ b/include/xkbsrv.h +@@ -58,6 +58,8 @@ THE USE OR PERFORMANCE OF THIS SOFTWARE. + #include "inputstr.h" + #include "events.h" + ++extern RESTYPE RT_XKBCLIENT; ++ + typedef struct _XkbInterest { + DeviceIntPtr dev; + ClientPtr client; +diff --git a/xkb/xkb.c b/xkb/xkb.c +index 3210ff9..b7877f5 100644 +--- a/xkb/xkb.c ++++ b/xkb/xkb.c +@@ -51,7 +51,7 @@ int XkbKeyboardErrorCode; + CARD32 xkbDebugFlags = 0; + static CARD32 xkbDebugCtrls = 0; + +-static RESTYPE RT_XKBCLIENT; ++RESTYPE RT_XKBCLIENT = 0; + + /***====================================================================***/ + +-- +2.40.0
meta/recipes-graphics/xwayland/xwayland/CVE-2025-62230-0002.patch new file +89 -0
89 lines not on this page · raw message
meta/recipes-graphics/xwayland/xwayland_23.2.5.bb +2 -0
@@ -32,6 +32,8 @@ SRC_URI = "https://www.x.org/archive/individual/xserver/xwayland-${PV}.tar.xz \ file://CVE-2025-49179.patch \ file://CVE-2025-49180.patch \ file://CVE-2025-62229.patch \ + file://CVE-2025-62230-0001.patch \ + file://CVE-2025-62230-0002.patch \ " SRC_URI[sha256sum] = "33ec7ff2687a59faaa52b9b09aa8caf118e7ecb6aed8953f526a625ff9f4bd90"
Signature · 1 line
2.43.0
PATCH 8/21 xwayland: fix CVE-2025-62231
In reply to Steve SakomanFrom: Yogita Urade <[email protected]>
A flaw was identified in the X.Org X serverâ\x80\x99s X Keyboard (Xkb) extension where improper bounds checking in the XkbSetCompatMap() function can cause an unsigned short overflow. If an attacker sends specially crafted input data, the value calculation may overflow, leading to memory corruption or a crash.
Reference:
https://nvd.nist.gov/vuln/detail/CVE-2025-62231
Upstream patch:
https://gitlab.freedesktop.org/xorg/xserver/-/commit/3baad99f9c15028ed8c3e3d8408e5ec35db155aa
--- .../xwayland/xwayland/CVE-2025-62231.patch | 50 +++++++++++++++++++ .../xwayland/xwayland_23.2.5.bb | 1 + 2 files changed, 51 insertions(+) create mode 100644 meta/recipes-graphics/xwayland/xwayland/CVE-2025-62231.patch
meta/recipes-graphics/xwayland/xwayland/CVE-2025-62231.patch new file +50 -0
@@ -0,0 +1,50 @@ +From 3baad99f9c15028ed8c3e3d8408e5ec35db155aa Mon Sep 17 00:00:00 2001 +From: Olivier Fourdan <[email protected]> +Date: Wed, 10 Sep 2025 16:30:29 +0200 +Subject: [PATCH] xkb: Prevent overflow in XkbSetCompatMap() + +The XkbCompatMap structure stores its "num_si" and "size_si" fields +using an unsigned short. + +However, the function _XkbSetCompatMap() will store the sum of the +input data "firstSI" and "nSI" in both XkbCompatMap's "num_si" and +"size_si" without first checking if the sum overflows the maximum +unsigned short value, leading to a possible overflow. + +To avoid the issue, check whether the sum does not exceed the maximum +unsigned short value, or return a "BadValue" error otherwise. + +CVE-2025-62231, ZDI-CAN-27560 + +This vulnerability was discovered by: +Jan-Niklas Sohn working with Trend Micro Zero Day Initiative + +Signed-off-by: Olivier Fourdan <[email protected]> +Reviewed-by: Michel Dänzer <[email protected]> +(cherry picked from commit 475d9f49acd0e55bc0b089ed77f732ad18585470) + +Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/2087> + +CVE: CVE-2025-62231 +Upstream-Status: Backport [https://gitlab.freedesktop.org/xorg/xserver/-/commit/3baad99f9c15028ed8c3e3d8408e5ec35db155aa] + +Signed-off-by: Yogita Urade <[email protected]> +--- + xkb/xkb.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/xkb/xkb.c b/xkb/xkb.c +index b7877f5..4e585d1 100644 +--- a/xkb/xkb.c ++++ b/xkb/xkb.c +@@ -2992,6 +2992,8 @@ _XkbSetCompatMap(ClientPtr client, DeviceIntPtr dev, + XkbSymInterpretPtr sym; + unsigned int skipped = 0; + ++ if ((unsigned) (req->firstSI + req->nSI) > USHRT_MAX) ++ return BadValue; + if ((unsigned) (req->firstSI + req->nSI) > compat->size_si) { + compat->num_si = compat->size_si = req->firstSI + req->nSI; + compat->sym_interpret = reallocarray(compat->sym_interpret, +-- +2.40.0
meta/recipes-graphics/xwayland/xwayland_23.2.5.bb +1 -0
@@ -34,6 +34,7 @@ SRC_URI = "https://www.x.org/archive/individual/xserver/xwayland-${PV}.tar.xz \ file://CVE-2025-62229.patch \ file://CVE-2025-62230-0001.patch \ file://CVE-2025-62230-0002.patch \ + file://CVE-2025-62231.patch \ " SRC_URI[sha256sum] = "33ec7ff2687a59faaa52b9b09aa8caf118e7ecb6aed8953f526a625ff9f4bd90"
Signature · 1 line
2.43.0
PATCH 9/21 musl: patch CVE-2025-26519
In reply to Steve SakomanFrom: Gyorgy Sarvari <[email protected]>
Details: https://nvd.nist.gov/vuln/detail/CVE-2025-26519
Pick the patches that are attached to the musl advisory:
https://www.openwall.com/lists/musl/2025/02/13/1
--- .../musl/musl/CVE-2025-26519-1.patch | 39 +++++++++++++++++++ .../musl/musl/CVE-2025-26519-2.patch | 38 ++++++++++++++++++ meta/recipes-core/musl/musl_git.bb | 4 +- 3 files changed, 80 insertions(+), 1 deletion(-) create mode 100644 meta/recipes-core/musl/musl/CVE-2025-26519-1.patch create mode 100644 meta/recipes-core/musl/musl/CVE-2025-26519-2.patch
meta/recipes-core/musl/musl/CVE-2025-26519-1.patch new file +39 -0
@@ -0,0 +1,39 @@ +From 8ebb2a68dfac02e7a83885587a9a5a203147ebbe Mon Sep 17 00:00:00 2001 +From: Rich Felker <[email protected]> +Date: Wed, 19 Nov 2025 13:23:38 +0100 +Subject: [PATCH] iconv: fix erroneous input validation in EUC-KR decoder + +as a result of incorrect bounds checking on the lead byte being +decoded, certain invalid inputs which should produce an encoding +error, such as "\xc8\x41", instead produced out-of-bounds loads from +the ksc table. + +in a worst case, the loaded value may not be a valid unicode scalar +value, in which case, if the output encoding was UTF-8, wctomb would +return (size_t)-1, causing an overflow in the output pointer and +remaining buffer size which could clobber memory outside of the output +buffer. + +bug report was submitted in private by Nick Wellnhofer on account of +potential security implications. + +CVE: CVE-2025-26519 +Upstream-Status: Backport [https://git.musl-libc.org/cgit/musl/commit/?id=e5adcd97b5196e29991b524237381a0202a60659] +Signed-off-by: Gyorgy Sarvari <[email protected]> +--- + src/locale/iconv.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/locale/iconv.c b/src/locale/iconv.c +index 3047c27b..1fb66bc8 100644 +--- a/src/locale/iconv.c ++++ b/src/locale/iconv.c +@@ -495,7 +495,7 @@ size_t iconv(iconv_t cd, char **restrict in, size_t *restrict inb, char **restri + if (c >= 93 || d >= 94) { + c += (0xa1-0x81); + d += 0xa1; +- if (c >= 93 || c>=0xc6-0x81 && d>0x52) ++ if (c > 0xc6-0x81 || c==0xc6-0x81 && d>0x52) + goto ilseq; + if (d-'A'<26) d = d-'A'; + else if (d-'a'<26) d = d-'a'+26;
meta/recipes-core/musl/musl/CVE-2025-26519-2.patch new file +38 -0
@@ -0,0 +1,38 @@ +From 7e7052e17e900194a588d337ff4a8e646133afed Mon Sep 17 00:00:00 2001 +From: Rich Felker <[email protected]> +Date: Wed, 19 Nov 2025 13:27:15 +0100 +Subject: [PATCH] iconv: harden UTF-8 output code path against input decoder + bugs + +the UTF-8 output code was written assuming an invariant that iconv's +decoders only emit valid Unicode Scalar Values which wctomb can encode +successfully, thereby always returning a value between 1 and 4. + +if this invariant is not satisfied, wctomb returns (size_t)-1, and the +subsequent adjustments to the output buffer pointer and remaining +output byte count overflow, moving the output position backwards, +potentially past the beginning of the buffer, without storing any +bytes. + +CVE: CVE-2025-26519 +Upstream-Status: Backport [https://git.musl-libc.org/cgit/musl/commit/?id=c47ad25ea3b484e10326f933e927c0bc8cded3da] +Signed-off-by: Gyorgy Sarvari <[email protected]> +--- + src/locale/iconv.c | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/src/locale/iconv.c b/src/locale/iconv.c +index 1fb66bc8..fb1d3217 100644 +--- a/src/locale/iconv.c ++++ b/src/locale/iconv.c +@@ -538,6 +538,10 @@ size_t iconv(iconv_t cd, char **restrict in, size_t *restrict inb, char **restri + if (*outb < k) goto toobig; + memcpy(*out, tmp, k); + } else k = wctomb_utf8(*out, c); ++ /* This failure condition should be unreachable, but ++ * is included to prevent decoder bugs from translating ++ * into advancement outside the output buffer range. */ ++ if (k>4) goto ilseq; + *out += k; + *outb -= k; + break;
meta/recipes-core/musl/musl_git.bb +3 -1
@@ -14,7 +14,9 @@ SRC_URI = "git://git.etalabs.net/git/musl;branch=master;protocol=https \ file://0001-Make-dynamic-linker-a-relative-symlink-to-libc.patch \ file://0002-ldso-Use-syslibdir-and-libdir-as-default-pathes-to-l.patch \ file://0003-elf.h-add-typedefs-for-Elf64_Relr-and-Elf32_Relr.patch \ - " + file://CVE-2025-26519-1.patch \ + file://CVE-2025-26519-2.patch \ + " S = "${WORKDIR}/git"
Signature · 1 line
2.43.0
PATCH 10/21 rust-target-config: fix nativesdk-libstd-rs build with baremetal
In reply to Steve SakomanFrom: Ovidiu Panait <[email protected]>
If TCLIBC='baremetal' is set in local.conf, nativesdk-libstd-rs build fails with:
| error[E0412]: cannot find type `c_char` in the crate root | --> /usr/src/debug/libstd-rs/1.75.0/rustc-1.75.0-src/vendor/libc/src/unix/mod.rs:56:29 | | | 6 | pub type c_schar = i8; | | ---------------------- similarly named type alias `c_schar` defined here | ... | 56 | pub gr_name: *mut ::c_char, | | ^^^^^^
This happens because rust_gen_target() sets os="none" when TCLIBC is 'baremetal' - even for nativesdk targets. However, nativesdk packages are built against glibc, so the correct 'os' value should be "linux".
Fix this by setting the os field based on {TARGET,HOST,BUILD}_OS variables, as it is already done in rust_base_triple(), instead of relying on TCLIBC.
(master rev: 3eaf2cd5647585a1e6df03fc20e2753da27bb692) -- backport
--- meta/classes-recipe/rust-target-config.bbclass | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
meta/classes-recipe/rust-target-config.bbclass +2 -1
@@ -329,6 +329,7 @@ def rust_gen_target(d, thing, wd, arch): sys = d.getVar('{}_SYS'.format(thing)) prefix = d.getVar('{}_PREFIX'.format(thing)) rustsys = d.getVar('RUST_{}_SYS'.format(thing)) + os = d.getVar('{}_OS'.format(thing)) abi = None cpu = "generic"
@@ -368,7 +369,7 @@ def rust_gen_target(d, thing, wd, arch): tspec['target-c-int-width'] = d.getVarFlag('TARGET_C_INT_WIDTH', arch_abi) tspec['target-endian'] = d.getVarFlag('TARGET_ENDIAN', arch_abi) tspec['arch'] = arch_to_rust_target_arch(rust_arch) - if "baremetal" in d.getVar('TCLIBC'): + if "elf" in os: tspec['os'] = "none" else: tspec['os'] = "linux"
Signature · 1 line
2.43.0
PATCH 11/21 glslang: fix compiling with gcc15
In reply to Steve SakomanFrom: Gyorgy Sarvari <[email protected]>
Backport a patch that fixes a compilation failure with gcc15:
| .../git/SPIRV/SpvBuilder.h:238:30: error: ‘uint32_t’ has not been declared | 238 | Id makeDebugLexicalBlock(uint32_t line); | | ^~~~~~~~ | .../git/SPIRV/SpvBuilder.h:64:1: note: ‘uint32_t’ is defined in header ‘<cstdint>’; this is probably fixable by adding ‘#include <cstdint>’
--- ...uilder.h-add-missing-cstdint-include.patch | 30 +++++++++++++++++++ .../glslang/glslang_1.3.275.0.bb | 1 + 2 files changed, 31 insertions(+) create mode 100644 meta/recipes-graphics/glslang/glslang/0001-SPIRV-SpvBuilder.h-add-missing-cstdint-include.patch
meta/recipes-graphics/glslang/glslang/0001-SPIRV-SpvBuilder.h-add-missing-cstdint-include.patch new file +30 -0
@@ -0,0 +1,30 @@ +From e40c14a3e007fac0e4f2e4164fdf14d1712355bd Mon Sep 17 00:00:00 2001 +From: Sergei Trofimovich <[email protected]> +Date: Fri, 2 Aug 2024 22:44:21 +0100 +Subject: [PATCH] SPIRV/SpvBuilder.h: add missing <cstdint> include + +Without the change `glslang` build fails on upcoming `gcc-15` as: + + In file included from /build/source/SPIRV/GlslangToSpv.cpp:45: + SPIRV/SpvBuilder.h:248:30: error: 'uint32_t' has not been declared + 248 | Id makeDebugLexicalBlock(uint32_t line); + | ^~~~~~~~ + +Upstream-Status: Backport [https://github.com/KhronosGroup/glslang/commit/e40c14a3e007fac0e4f2e4164fdf14d1712355bd] +Signed-off-by: Gyorgy Sarvari <[email protected]> +--- + SPIRV/SpvBuilder.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/SPIRV/SpvBuilder.h b/SPIRV/SpvBuilder.h +index b1ca6ce1..00b2e53a 100644 +--- a/SPIRV/SpvBuilder.h ++++ b/SPIRV/SpvBuilder.h +@@ -56,6 +56,7 @@ namespace spv { + } + + #include <algorithm> ++#include <cstdint> + #include <map> + #include <memory> + #include <set>
meta/recipes-graphics/glslang/glslang_1.3.275.0.bb +1 -0
@@ -11,6 +11,7 @@ LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=2a2b5acd7bc4844964cfda45fe807dc3" SRCREV = "a91631b260cba3f22858d6c6827511e636c2458a" SRC_URI = "git://github.com/KhronosGroup/glslang.git;protocol=https;branch=main \ file://0001-generate-glslang-pkg-config.patch \ + file://0001-SPIRV-SpvBuilder.h-add-missing-cstdint-include.patch \ " PE = "1" # These recipes need to be updated in lockstep with each other:
Signature · 1 line
2.43.0
PATCH 12/21 testsdk: allow user to specify which tests to run
In reply to Steve SakomanFrom: Ross Burton <[email protected]>
Following the usage of TEST_SUITES in testimage, add TESTSDK_SUITES to specify the list of tests to execute. By default the variable is empty, which means to run all discovered tests.
This makes it easier to work on a single test without having to run all of the tests.
(From OE-Core rev: 28d437c52c77889b2ede0fc2f2d6777c5b0a553d)
--- meta/classes-recipe/testsdk.bbclass | 3 +++ meta/lib/oeqa/sdk/testsdk.py | 3 ++- meta/lib/oeqa/sdkext/testsdk.py | 3 ++- 3 files changed, 7 insertions(+), 2 deletions(-)
meta/classes-recipe/testsdk.bbclass +3 -0
@@ -14,6 +14,9 @@ # # where "<image-name>" is an image like core-image-sato. +# List of test modules to run, or run all that can be found if unset +TESTSDK_SUITES ?= "" + TESTSDK_CLASS_NAME ?= "oeqa.sdk.testsdk.TestSDK" TESTSDKEXT_CLASS_NAME ?= "oeqa.sdkext.testsdk.TestSDKExt"
meta/lib/oeqa/sdk/testsdk.py +2 -1
@@ -114,7 +114,8 @@ class TestSDK(TestSDKBase): host_pkg_manifest=host_pkg_manifest, **context_args) try: - tc.loadTests(self.context_executor_class.default_cases) + modules = (d.getVar("TESTSDK_SUITES") or "").split() + tc.loadTests(self.context_executor_class.default_cases, modules) except Exception as e: import traceback bb.fatal("Loading tests failed:\n%s" % traceback.format_exc())
meta/lib/oeqa/sdkext/testsdk.py +2 -1
@@ -82,7 +82,8 @@ class TestSDKExt(TestSDKBase): host_pkg_manifest=host_pkg_manifest) try: - tc.loadTests(OESDKExtTestContextExecutor.default_cases) + modules = (d.getVar("TESTSDK_SUITES") or "").split() + tc.loadTests(OESDKExtTestContextExecutor.default_cases, modules) except Exception as e: import traceback bb.fatal("Loading tests failed:\n%s" % traceback.format_exc())
Signature · 1 line
2.43.0
PATCH 13/21 oe/sdk: fix empty SDK manifests
In reply to Steve SakomanFrom: Ross Burton <[email protected]>
The SDK manifests are generated by listing the sstate was that used, but it hardcodes that the sstate data filenames end in .tgz.
This has not been the case since sstate switched to Zstd[1] in 2021, which meant that all of the tests which checked for packages existing were being skipped as the manifests were empty. For example, see a representative core-image-sato eSDK test run[2]:
RESULTS - cmake.CMakeTest.test_assimp: SKIPPED (0.00s)
RESULTS - gtk3.GTK3Test.test_galculator: SKIPPED (0.00s) RESULTS - kmod.KernelModuleTest.test_cryptodev: SKIPPED (0.00s) RESULTS - maturin.MaturinDevelopTest.test_maturin_develop: SKIPPED (0.00s) RESULTS - maturin.MaturinTest.test_maturin_list_python: SKIPPED (0.00s) RESULTS - meson.MesonTest.test_epoxy: SKIPPED (0.00s)
RESULTS - perl.PerlTest.test_perl: SKIPPED (0.00s)
RESULTS - python.Python3Test.test_python3: SKIPPED (0.00s)
All of those tests should have been ran.
Solve this by generalising the filename check so that it doesn't care what specfic compression algorithm is used.
[1] oe-core 0710e98f40e ("sstate: Switch to ZStandard compressor support")
[2] https://autobuilder.yoctoproject.org/valkyrie/#/builders/16/builds/1517/steps/15/logs/stdio
--- meta/lib/oe/sdk.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
meta/lib/oe/sdk.py +2 -1
@@ -148,7 +148,8 @@ def get_extra_sdkinfo(sstate_dir): extra_info['filesizes'] = {} for root, _, files in os.walk(sstate_dir): for fn in files: - if fn.endswith('.tgz'): + # Note that this makes an assumption about the sstate filenames + if '.tar.' in fn and not fn.endswith('.siginfo'): fsize = int(math.ceil(float(os.path.getsize(os.path.join(root, fn))) / 1024)) task = fn.rsplit(':',1)[1].split('_',1)[1].split(',')[0] origtotal = extra_info['tasksizes'].get(task, 0)
Signature · 1 line
2.43.0
PATCH 14/21 lib/oe/go: document map_arch, and raise an error on unknown architecture
In reply to Steve SakomanFrom: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev: 025414c16319b068df1cd757ad9a3c987a6b871d)
--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
meta/lib/oe/go.py +5 -1
@@ -7,6 +7,10 @@ import re def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + See https://github.com/golang/go/blob/master/src/internal/syslist/syslist.go for the complete list. + """ if re.match('i.86', a): return '386' elif a == 'x86_64':
@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}")
Signature · 1 line
2.43.0
Re: [OE-core][scarthgap 14/21] lib/oe/go: document map_arch, and raise an error on unknown architecture
This patch breaks Microblaze for me.
Microblazeel is not in the list of course, but go doesn't support this architecture.
During parsing of various things, instead of the component not being available I now get many many lines similar to:
WARNING: <recipe>: Exception during build_dependencies for GOARCH
WARNING: <recipe>: Error during finalize of <multiconfig>
ERROR: ExpansionError during parsing <recipe>
bb.data_smart.ExceptionError: Failure expanding TARGET_GOARCH, expression was ${go_map_arch(d.getVar('TARGET_ARCH'), d)} which triggered exception KeyError: 'Cannot map architecture microblazeel' The variable dependency chain for the failure is: TARGET_GOARCH -> GOARCH
(at which point parsing stops)
I see no obvious way here to add an architecture that OE/Poky does not support, which now makes this a hard error for any architecture not supported by the core of OE and/or go. (in the case of microblaze, rust and go are likely to never be supported. So there has to be a way for me to avoid the parse error in these cases.)
Quoted 50 lines · Steve Sakoman
From: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev:
025414c16319b068df1cd757ad9a3c987a6b871d)Signed-off-by Ross Burton <[email protected]>Signed-off-by Richard Purdie <[email protected]>Signed-off-by Peter Marko <[email protected]>Signed-off-by Steve Sakoman <[email protected]>--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)meta/lib/oe/go.py +5
-2@@ -7,6 +7,10 @@ import re def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + See https://github.com/golang/go/blob/master/src/internal/syslist/syslist.go for the complete list. + """ if re.match('i.86', a): return '386' elif a == 'x86_64':@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}") -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group.
View/Reply Online (#226712): https://lists.openembedded.org/g/openembedded-core/message/226712
Mute This Topic: https://lists.openembedded.org/mt/116430143/3616948
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [OE-core][scarthgap 14/21] lib/oe/go: document map_arch, and raise an error on unknown architecture
I have a possible workaround, for microblaze, for this.
Basically it's to force include a class that does:
python __anonymous() {
if bb.data.inherits_class('goarch', d):
if d.getVar('TARGET_ARCH') in ['microblaze', 'microblazeel',
'microblazeeb']:
raise bb.parse.SkipRecipe("Go does not support microblaze.")
}
Quoted 78 lines · Mark Hatle
This patch breaks Microblaze for me.
Microblazeel is not in the list of course, but go doesn't support this architecture.
During parsing of various things, instead of the component not being available I now get many many lines similar to:
WARNING: <recipe>: Exception during
build_dependenciesfor GOARCH
WARNING: <recipe>: Error during finalize of <multiconfig>
ERROR: ExpansionError during parsing <recipe> bb.data_smart.ExceptionError: Failure expandingTARGET_GOARCH, expression was ${go_map_arch(d.getVar('TARGET_ARCH'), d)} which triggered exception KeyError:
'Cannot map architecture microblazeel'
The variable dependency chain for the failure is:TARGET_GOARCH-> GOARCH(at which point parsing stops)
I see no obvious way here to add an architecture that OE/Poky does not support, which now makes this a hard error for any architecture not supported by the core of OE and/or go. (in the case of microblaze, rust and go are likely to never be supported. So there has to be a way for me to avoid the parse error in these cases.)
Quoted 54 lines · Steve Sakoman
From: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev:
025414c16319b068df1cd757ad9a3c987a6b871d)Signed-off-by Ross Burton <[email protected]>Signed-off-by Richard Purdie <[email protected]>Signed-off-by Peter Marko <[email protected]>Signed-off-by Steve Sakoman <[email protected]>--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)meta/lib/oe/go.py +5
-2@@ -7,6 +7,10 @@ import re def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + See https://github.com/golang/go/blob/master/src/internal/syslist/syslist.go for the complete list. + """ if re.match('i.86', a): return '386' elif a == 'x86_64':@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}") -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group.
View/Reply Online (#226817): https://lists.openembedded.org/g/openembedded-core/message/226817
Mute This Topic: https://lists.openembedded.org/mt/116430143/3616948
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
RE: [OE-core][scarthgap 14/21] lib/oe/go: document map_arch, and raise an error on unknown architecture
Quoted 8 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Mark Hatle
Sent: den 27 november 2025 02:02
To: Steve Sakoman <[email protected]>; [email protected]
Subject: Re: [OE-core][scarthgap 14/21]lib/oe/go: documentmap_arch, and raise an error on unknown architectureI have a possible workaround, for microblaze, for this.
Quoted 7 lines
Basically it's to force include a class that does:
python
__anonymous(){
ifbb.data.inherits_class('goarch', d):
ifd.getVar('TARGET_ARCH')in ['microblaze', 'microblazeel', 'microblazeeb']:
raisebb.parse.SkipRecipe("Go does not support microblaze.")
}
What if you make the map_arch() function raise bb.parse.SkipRecipe rather than KeyError? Wouldn't that achieve the same without having to hardcode a solution for each architecture that is not supported by Go?
//Peter
Quoted 64 lines · Mark Hatle
Quoted 63 lines
This patch breaks Microblaze for me.
Microblazeel is not in the list of course, but go doesn't support this architecture.
During parsing of various things, instead of the component not being available I now get many many lines similar to:
WARNING: <recipe>: Exception during
build_dependenciesfor GOARCH
WARNING: <recipe>: Error during finalize of <multiconfig>
ERROR: ExpansionError during parsing <recipe> bb.data_smart.ExceptionError: Failure expandingTARGET_GOARCH, expression was ${go_map_arch(d.getVar('TARGET_ARCH'), d)} which triggered exception KeyError:
'Cannot map architecture microblazeel'
The variable dependency chain for the failure is:TARGET_GOARCH-> GOARCH(at which point parsing stops)
I see no obvious way here to add an architecture that OE/Poky does not support, which now makes this a hard error for any architecture not supported by the core of OE and/or go. (in the case of microblaze, rust and go are likely to never be supported. So there has to be a way for me to avoid the parse error in these cases.)
Quoted 39 lines · Steve Sakoman
From: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev:
025414c16319b068df1cd757ad9a3c987a6b871d)Signed-off-by Ross Burton <[email protected]>Signed-off-by Richard Purdie <[email protected]>Signed-off-by Peter Marko <[email protected]>Signed-off-by Steve Sakoman <[email protected]>--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)meta/lib/oe/go.py +5
-1@@ -7,6 +7,10 @@ import re def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + See https://github.com/golang/go/blob/master/src/internal/syslist/syslist.go for the complete list. + """ if re.match('i.86', a): return '386' elif a == 'x86_64':@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}")
Re: [OE-core][scarthgap 14/21] lib/oe/go: document map_arch, and raise an error on unknown architecture
Quoted 16 lines · Peter Kjellerstedt via lists.openembedded.org
Quoted 8 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Mark Hatle
Sent: den 27 november 2025 02:02
To: Steve Sakoman <[email protected]>; [email protected]
Subject: Re: [OE-core][scarthgap 14/21]lib/oe/go: documentmap_arch, and raise an error on unknown architectureI have a possible workaround, for microblaze, for this.
Quoted 7 lines
Basically it's to force include a class that does:
python
__anonymous(){
ifbb.data.inherits_class('goarch', d):
ifd.getVar('TARGET_ARCH')in ['microblaze', 'microblazeel', 'microblazeeb']:
raisebb.parse.SkipRecipe("Go does not support microblaze.")
}
Quoted 3 lines
What if you make the
map_arch()function raise bb.parse.SkipRecipe rather than KeyError? Wouldn't that achieve the same without having to hardcode a solution for each architecture that is not supported by Go?
_I_ can't make map_arch raise skiprecipe because it's part of oe-core and there is no easy way to override it in a layer.
But with that, said, raising an exception in map_arch() of KeyError really feels anti-social. Changing THAT exception to a SkipRecipe would make a lot more sense and prevent anyone from using go that wasn't supported.
Alternatively the caller of map_arch could catch the key error and raise the skiprecipe with an appropriate message as well.
I have a similar chunk like that anonymous python for rust for a similar reason.
That might be another candidate to do some sort of automatic raise if it's
unsupported.
In any case, I think there are really two issues here.
1) Raising KeyError is antisocial to architectures that are out of tree and don't support go.
2) There should be a way for out of tree architectures to _easily_ add themselves to the arch list, should they be supported by go.
--Mark
Quoted 77 lines
//Peter
Quoted 50 lines · Mark Hatle
Quoted 49 lines
This patch breaks Microblaze for me.
Microblazeel is not in the list of course, but go doesn't support this architecture.
During parsing of various things, instead of the component not being available I now get many many lines similar to:
WARNING: <recipe>: Exception during
build_dependenciesfor GOARCH
WARNING: <recipe>: Error during finalize of <multiconfig>
ERROR: ExpansionError during parsing <recipe> bb.data_smart.ExceptionError: Failure expandingTARGET_GOARCH, expression was ${go_map_arch(d.getVar('TARGET_ARCH'), d)} which triggered exception KeyError:
'Cannot map architecture microblazeel'
The variable dependency chain for the failure is:TARGET_GOARCH-> GOARCH(at which point parsing stops)
I see no obvious way here to add an architecture that OE/Poky does not support, which now makes this a hard error for any architecture not supported by the core of OE and/or go. (in the case of microblaze, rust and go are likely to never be supported. So there has to be a way for me to avoid the parse error in these cases.)
Quoted 25 lines · Steve Sakoman
From: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev:
025414c16319b068df1cd757ad9a3c987a6b871d)Signed-off-by Ross Burton <[email protected]>Signed-off-by Richard Purdie <[email protected]>Signed-off-by Peter Marko <[email protected]>Signed-off-by Steve Sakoman <[email protected]>--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)meta/lib/oe/go.py +0
-0@@ -7,6 +7,10 @@ import reQuoted 14 lines
Quoted 6 lines
Quoted 6 lines
meta/lib/oe/go.py +4
-0def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + See https://github.com/golang/go/blob/master/src/internal/syslist/syslist.go for the complete list. + """ if re.match('i.86', a):Quoted 8 lines
meta/lib/oe/go.py def map_arch(a): · line 38
Quoted 8 lines
meta/lib/oe/go.py +1
-1return '386' elif a == 'x86_64':@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}")-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#226826): https://lists.openembedded.org/g/openembedded-core/message/226826
Mute This Topic: https://lists.openembedded.org/mt/116430143/3616948
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
RE: [OE-core][scarthgap 14/21] lib/oe/go: document map_arch, and raise an error on unknown architecture
In reply to Mark HatleQuoted 36 lines
-----Original Message-----
From: [email protected] <openembedded- [email protected]> On Behalf Of Mark Hatle
Sent: Thursday, November 27, 2025 2:02
To: Steve Sakoman <[email protected]>; openembedded- [email protected]
Subject: Re: [OE-core][scarthgap 14/21]lib/oe/go: documentmap_arch, and raise an error on unknown architectureI have a possible workaround, for microblaze, for this.
Basically it's to force include a class that does:
python
__anonymous(){
ifbb.data.inherits_class('goarch', d):
ifd.getVar('TARGET_ARCH')in ['microblaze', 'microblazeel',
'microblazeeb']:
raisebb.parse.SkipRecipe("Go does not support microblaze.")
}Quoted 11 lines · Mark Hatle
This patch breaks Microblaze for me.
Microblazeel is not in the list of course, but go doesn't support this architecture.
During parsing of various things, instead of the component not being available I now get many many lines similar to:
WARNING: <recipe>: Exception during
build_dependenciesfor GOARCH
WARNING: <recipe>: Error during finalize of <multiconfig>
ERROR: ExpansionError during parsing <recipe> bb.data_smart.ExceptionError: Failure expandingTARGET_GOARCH,expression was
Quoted 1 line
${go_map_arch(d.getVar('TARGET_ARCH'), d)} which triggered exception
Quoted 12 lines
KeyError:
Quoted 6 lines
'Cannot map architecture microblazeel'
The variable dependency chain for the failure is:TARGET_GOARCH-> GOARCH(at which point parsing stops)
I see no obvious way here to add an architecture that OE/Poky does not
support,
Quoted 4 lines
which now makes this a hard error for any architecture not supported by the core of OE and/or go. (in the case of microblaze, rust and go are likely to never be supported. So there has to be a way for me to avoid the parse error in these cases.)
OK, that's unfortunate.
However this is something that needed a review when pushed to master branch half a year ago. This backport then just means you see it half a year ahead of migrating to new LTS release.
Possibly submit a revert or other adaptation to master branch and we can backport it then to scarthgap .
Peter
Quoted 51 lines
Quoted 27 lines · Steve Sakoman
Quoted 25 lines
From: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev:
025414c16319b068df1cd757ad9a3c987a6b871d)Signed-off-by Ross Burton <[email protected]>Signed-off-by Richard Purdie <[email protected]>Signed-off-by Peter Marko <[email protected]>Signed-off-by Steve Sakoman <[email protected]>--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)meta/lib/oe/go.py +0
-0@@ -7,6 +7,10 @@ import reQuoted 4 lines
meta/lib/oe/go.py
Quoted 4 lines
meta/lib/oe/go.py +3
-0def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + See https://github.com/golang/go/blob/master/src/internal/syslist/syslist.gofor the complete list.
Quoted 19 lines
Quoted 19 lines
meta/lib/oe/go.py +2
-1+ """ if re.match('i.86', a): return '386' elif a == 'x86_64':@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}")
Re: [OE-core][scarthgap 14/21] lib/oe/go: document map_arch, and raise an error on unknown architecture
Quoted 49 lines · Peter Marko via lists.openembedded.org
Quoted 36 lines
-----Original Message-----
From: [email protected] <openembedded- [email protected]> On Behalf Of Mark Hatle
Sent: Thursday, November 27, 2025 2:02
To: Steve Sakoman <[email protected]>; openembedded- [email protected]
Subject: Re: [OE-core][scarthgap 14/21]lib/oe/go: documentmap_arch, and raise an error on unknown architectureI have a possible workaround, for microblaze, for this.
Basically it's to force include a class that does:
python
__anonymous(){
ifbb.data.inherits_class('goarch', d):
ifd.getVar('TARGET_ARCH')in ['microblaze', 'microblazeel',
'microblazeeb']:
raisebb.parse.SkipRecipe("Go does not support microblaze.")
}Quoted 11 lines · Mark Hatle
This patch breaks Microblaze for me.
Microblazeel is not in the list of course, but go doesn't support this architecture.
During parsing of various things, instead of the component not being available I now get many many lines similar to:
WARNING: <recipe>: Exception during
build_dependenciesfor GOARCH
WARNING: <recipe>: Error during finalize of <multiconfig>
ERROR: ExpansionError during parsing <recipe> bb.data_smart.ExceptionError: Failure expandingTARGET_GOARCH,expression was
Quoted 1 line
${go_map_arch(d.getVar('TARGET_ARCH'), d)} which triggered exception
Quoted 12 lines
KeyError:
Quoted 6 lines
'Cannot map architecture microblazeel'
The variable dependency chain for the failure is:TARGET_GOARCH-> GOARCH(at which point parsing stops)
I see no obvious way here to add an architecture that OE/Poky does not
support,
Quoted 4 lines
which now makes this a hard error for any architecture not supported by the core of OE and/or go. (in the case of microblaze, rust and go are likely to never be supported. So there has to be a way for me to avoid the parse error in these cases.)
Quoted 6 lines
OK, that's unfortunate.
However this is something that needed a review when pushed to master branch half a year ago. This backport then just means you see it half a year ahead of migrating to new LTS release.
Possibly submit a revert or other adaptation to master branch and we can backport it then to scarthgap .
I do NOT believe this should be reverted in master. Master is different then scarthgap, and per my other reply to Peter Kjellerstedt I think it should be adjusted. I'm willing to try to suggest the adjustments to master.
It's scarthgap that I think this should be reverted. It's a change in behavior from prior scarthgap and absolutely broke my existing (functional) layer. With that said, I have a 'workaround' for it, but it's going to take me time to QA everything and get it in for my scarthgap users.
My objection is to changing system behavior in the LTS, nothing more in this case.
--Mark
Quoted 63 lines
Peter
Quoted 61 lines
Quoted 27 lines · Steve Sakoman
Quoted 25 lines
From: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev:
025414c16319b068df1cd757ad9a3c987a6b871d)Signed-off-by Ross Burton <[email protected]>Signed-off-by Richard Purdie <[email protected]>Signed-off-by Peter Marko <[email protected]>Signed-off-by Steve Sakoman <[email protected]>--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)meta/lib/oe/go.py +0
-0@@ -7,6 +7,10 @@ import reQuoted 4 lines
meta/lib/oe/go.py
Quoted 4 lines
meta/lib/oe/go.py +3
-0def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + See https://github.com/golang/go/blob/master/src/internal/syslist/syslist.gofor the complete list.
Quoted 29 lines
Quoted 29 lines
meta/lib/oe/go.py +2
-2+ """ if re.match('i.86', a): return '386' elif a == 'x86_64':@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}") -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group.
View/Reply Online (#226827): https://lists.openembedded.org/g/openembedded-core/message/226827
Mute This Topic: https://lists.openembedded.org/mt/116430143/3616948
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
RE: [OE-core][scarthgap 14/21] lib/oe/go: document map_arch, and raise an error on unknown architecture
Quoted 82 lines
-----Original Message-----
From: Mark Hatle <[email protected]>
Sent: Thursday, November 27, 2025 16:52
To: Marko, Peter (FT D EU SK BFS1) <[email protected]>; Steve Sakoman <[email protected]>; [email protected]
Subject: Re: [OE-core][scarthgap 14/21]lib/oe/go: documentmap_arch, and raise an error on unknown architectureQuoted 9 lines · Peter Marko via lists.openembedded.org
Quoted 9 lines
-----Original Message-----
From: [email protected] <openembedded- [email protected]> On Behalf Of Mark Hatle
Sent: Thursday, November 27, 2025 2:02
To: Steve Sakoman <[email protected]>; openembedded- [email protected]
Subject: Re: [OE-core][scarthgap 14/21]lib/oe/go: documentmap_arch, andraise
Quoted 13 lines
Quoted 13 lines
an error on unknown architecture
I have a possible workaround, for microblaze, for this.
Basically it's to force include a class that does:
python
__anonymous(){
ifbb.data.inherits_class('goarch', d):
ifd.getVar('TARGET_ARCH')in ['microblaze', 'microblazeel',
'microblazeeb']:
raisebb.parse.SkipRecipe("Go does not support microblaze.")
}Quoted 4 lines
Quoted 4 lines · Mark Hatle
Quoted 3 lines
This patch breaks Microblaze for me.
Microblazeel is not in the list of course, but go doesn't support this
architecture.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
During parsing of various things, instead of the component not being
available I
Quoted 11 lines
Quoted 11 lines
Quoted 6 lines
now get many many lines similar to:
WARNING: <recipe>: Exception during
build_dependenciesfor GOARCH
WARNING: <recipe>: Error during finalize of <multiconfig>
ERROR: ExpansionError during parsing <recipe> bb.data_smart.ExceptionError: Failure expandingTARGET_GOARCH,expression was
Quoted 1 line
${go_map_arch(d.getVar('TARGET_ARCH'), d)} which triggered exception
KeyError:
Quoted 2 lines
'Cannot map architecture microblazeel'
The variable dependency chain for the failure is:TARGET_GOARCH->GOARCH
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
(at which point parsing stops)
I see no obvious way here to add an architecture that OE/Poky does not
support,
Quoted 1 line
which now makes this a hard error for any architecture not supported by the
core
Quoted 1 line
Quoted 1 line
Quoted 1 line
of OE and/or go. (in the case of microblaze, rust and go are likely to never
be
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
supported. So there has to be a way for me to avoid the parse error in these cases.)
OK, that's unfortunate.
However this is something that needed a review when pushed to master branch
half a year ago.
Quoted 1 line
This backport then just means you see it half a year ahead of migrating to new
LTS release.
Quoted 2 lines
Possibly submit a revert or other adaptation to master branch and we can
backport it then to scarthgap .
I do NOT believe this should be reverted in master. Master is different then scarthgap, and per my other reply to Peter Kjellerstedt I think it should be adjusted. I'm willing to try to suggest the adjustments to master.
Quoted 7 lines
It's scarthgap that I think this should be reverted. It's a change in behavior from prior scarthgap and absolutely broke my existing (functional) layer. With that said, I have a 'workaround' for it, but it's going to take me time to QA everything and get it in for my scarthgap users.
My objection is to changing system behavior in the LTS, nothing more in this case.
OK, no problem, I don’t insist on this commit to be present in scarthgap, I need the other ones from tat series for proper golang testing. Feel free to send a revert commit.
Peter
Quoted 69 lines
--Mark
Quoted 29 lines
Peter
Quoted 27 lines
Quoted 27 lines · Steve Sakoman
Quoted 25 lines
From: Ross Burton <[email protected]>
Add a comment explaining what this function does and where the values come from.
If the architecture isn't know, instead of returning an empty string which could fail mysteriously, raise a KeyError so it fails quickly.
(From OE-Core rev:
025414c16319b068df1cd757ad9a3c987a6b871d)Signed-off-by Ross Burton <[email protected]>Signed-off-by Richard Purdie <[email protected]>Signed-off-by Peter Marko <[email protected]>Signed-off-by Steve Sakoman <[email protected]>--- meta/lib/oe/go.py | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)meta/lib/oe/go.py +0
-0@@ -7,6 +7,10 @@ import reQuoted 4 lines
Quoted 4 lines
Quoted 4 lines
meta/lib/oe/go.py
Quoted 4 lines
meta/lib/oe/go.py +3
-0def map_arch(a): + """ + Map our architecture names to Go's GOARCH names. + Seehttps://github.com/golang/go/blob/master/src/internal/syslist/syslist.go
Quoted 22 lines
Quoted 22 lines
for the complete list.
Quoted 21 lines
Quoted 21 lines
meta/lib/oe/go.py +2
-1+ """ if re.match('i.86', a): return '386' elif a == 'x86_64':@@ -31,4 +35,4 @@ def map_arch(a): return 'riscv64' elif a == 'loongarch64': return 'loong64' - return '' + raise KeyError(f"Cannot map architecture {a}")Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#226827):https://lists.openembedded.org/g/openembedded-core/message/226827
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mute This Topic: https://lists.openembedded.org/mt/116430143/3616948
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsubQuoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-=-=-=-=-=-=-=-=-=-=-=-
PATCH 15/21 goarch.bbclass: do not leak TUNE_FEATURES into crosssdk task signatures
In reply to Steve SakomanFrom: Alexander Kanavin <[email protected]>
The default assignments look like this:TARGET_GO386 = "${@go_map_386(d.getVar('TARGET_ARCH'), d.getVar('TUNE_FEATURES'), d)}"
TUNE_FEATURES is a target-specific variable, and so should be used only for target builds. The change is similar to what is already done for native packages.
(From OE-Core rev: cfff8e968257c44880caa3605e158764ed5c6a2a)
--- meta/classes-recipe/goarch.bbclass | 3 +++ 1 file changed, 3 insertions(+)
meta/classes-recipe/goarch.bbclass +3 -0
@@ -24,6 +24,9 @@ TARGET_GOMIPS = "${@go_map_mips(d.getVar('TARGET_ARCH'), d.getVar('TUNE_FEATURES TARGET_GOARM:class-native = "7" TARGET_GO386:class-native = "sse2" TARGET_GOMIPS:class-native = "hardfloat" +TARGET_GOARM:class-crosssdk = "7" +TARGET_GO386:class-crosssdk = "sse2" +TARGET_GOMIPS:class-crosssdk = "hardfloat" TARGET_GOTUPLE = "${TARGET_GOOS}_${TARGET_GOARCH}" GO_BUILD_BINDIR = "${@['bin/${HOST_GOTUPLE}','bin'][d.getVar('BUILD_GOTUPLE') == d.getVar('HOST_GOTUPLE')]}"
Signature · 1 line
2.43.0
PATCH 16/21 go: add sdk test
In reply to Steve SakomanFrom: Osama Abdelkader <[email protected]>
- Add meta/lib/oeqa/sdk/cases/go.py with GoCompileTest and GoHostCompileTest classes
- Test validates Go cross-compilation toolchain functionality
- Includes native compilation, cross-compilation, and Go module support
- Uses dynamic architecture detection for portability
(From OE-Core rev: 17015f692a6bf3697a89db51bbc4673a5efa1497)
--- meta/lib/oeqa/sdk/cases/go.py | 128 ++++++++++++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 meta/lib/oeqa/sdk/cases/go.py
meta/lib/oeqa/sdk/cases/go.py new file +128 -0
@@ -0,0 +1,128 @@ +# +# Copyright OpenEmbedded Contributors +# +# SPDX-License-Identifier: MIT +# + +import os +import shutil +import unittest + +from oeqa.core.utils.path import remove_safe +from oeqa.sdk.case import OESDKTestCase + +from oeqa.utils.subprocesstweak import errors_have_output +errors_have_output() + +class GoCompileTest(OESDKTestCase): + td_vars = ['MACHINE', 'TARGET_ARCH'] + + @classmethod + def setUpClass(self): + # Copy test.go file to SDK directory (same as GCC test uses files_dir) + shutil.copyfile(os.path.join(self.tc.files_dir, 'test.go'), + os.path.join(self.tc.sdk_dir, 'test.go')) + + def setUp(self): + target_arch = self.td.get("TARGET_ARCH") + # Check for go-cross-canadian package (uses target architecture) + if not self.tc.hasHostPackage("go-cross-canadian-%s" % target_arch): + raise unittest.SkipTest("GoCompileTest class: SDK doesn't contain a Go cross-canadian toolchain") + + # Additional runtime check for go command availability + try: + self._run('which go') + except Exception as e: + raise unittest.SkipTest("GoCompileTest class: go command not available: %s" % str(e)) + + def test_go_build(self): + """Test Go build command (native compilation)""" + self._run('cd %s; go build -o test test.go' % self.tc.sdk_dir) + + def test_go_module(self): + """Test Go module creation and building""" + # Create a simple Go module + self._run('cd %s; go mod init hello-go' % self.tc.sdk_dir) + self._run('cd %s; go build -o hello-go' % self.tc.sdk_dir) + + @classmethod + def tearDownClass(self): + files = [os.path.join(self.tc.sdk_dir, f) \ + for f in ['test.go', 'test', 'hello-go', 'go.mod', 'go.sum']] + for f in files: + remove_safe(f) + +class GoHostCompileTest(OESDKTestCase): + td_vars = ['MACHINE', 'SDK_SYS', 'TARGET_ARCH'] + + # Architecture mapping from Yocto/Poky to Go + ARCH_MAP = { + 'aarch64': 'arm64', + 'cortexa57': 'arm64', # ARM Cortex-A57 is ARM64 + 'cortexa72': 'arm64', # ARM Cortex-A72 is ARM64 + 'cortexa53': 'arm64', # ARM Cortex-A53 is ARM64 + 'x86_64': 'amd64', + 'i586': '386', + 'i686': '386', + 'mips': 'mips', + 'mipsel': 'mipsle', + 'powerpc64': 'ppc64', + 'powerpc64le': 'ppc64le', + 'riscv64': 'riscv64', + } + + @classmethod + def setUpClass(self): + # Copy test.go file to SDK directory (same as GCC test uses files_dir) + shutil.copyfile(os.path.join(self.tc.files_dir, 'test.go'), + os.path.join(self.tc.sdk_dir, 'test.go')) + + def setUp(self): + target_arch = self.td.get("TARGET_ARCH") + # Check for go-cross-canadian package (uses target architecture) + if not self.tc.hasHostPackage("go-cross-canadian-%s" % target_arch): + raise unittest.SkipTest("GoHostCompileTest class: SDK doesn't contain a Go cross-canadian toolchain") + + # Additional runtime check for go command availability + try: + self._run('which go') + except Exception as e: + raise unittest.SkipTest("GoHostCompileTest class: go command not available: %s" % str(e)) + + def _get_go_arch(self): + """Get Go architecture from SDK_SYS""" + sdksys = self.td.get("SDK_SYS") + arch = sdksys.split('-')[0] + + # Handle ARM variants + if arch.startswith('arm'): + return 'arm' + + # Use mapping for other architectures + return self.ARCH_MAP.get(arch, arch) + + def test_go_cross_compile(self): + """Test Go cross-compilation for target""" + goarch = self._get_go_arch() + self._run('cd %s; GOOS=linux GOARCH=%s go build -o test-%s test.go' % (self.tc.sdk_dir, goarch, goarch)) + + def test_go_module_cross_compile(self): + """Test Go module cross-compilation""" + goarch = self._get_go_arch() + self._run('cd %s; go mod init hello-go' % self.tc.sdk_dir) + self._run('cd %s; GOOS=linux GOARCH=%s go build -o hello-go-%s' % (self.tc.sdk_dir, goarch, goarch)) + + @classmethod + def tearDownClass(self): + # Clean up files with dynamic architecture names + files = [os.path.join(self.tc.sdk_dir, f) \ + for f in ['test.go', 'go.mod', 'go.sum']] + # Add architecture-specific files using the same mapping + for arch in self.ARCH_MAP.values(): + files.extend([os.path.join(self.tc.sdk_dir, f) \ + for f in ['test-%s' % arch, 'hello-go-%s' % arch]]) + # Add 'arm' for ARM variants + files.extend([os.path.join(self.tc.sdk_dir, f) \ + for f in ['test-arm', 'hello-go-arm']]) + for f in files: + remove_safe(f)
Signature · 1 line
2.43.0
PATCH 17/21 go: extend runtime test
In reply to Steve SakomanFrom: Osama Abdelkader <[email protected]>
extend go runtime test with a simple test file, and simple go module test to validate go compilation and execution on target.
(From OE-Core rev: e3b2b9170f76f4bbdc41ea6ba7bccffc17d01968)
--- meta/lib/oeqa/files/test.go | 7 ++++ meta/lib/oeqa/runtime/cases/go.py | 68 +++++++++++++++++++++++++++++++ 2 files changed, 75 insertions(+) create mode 100644 meta/lib/oeqa/files/test.go
meta/lib/oeqa/files/test.go new file +7 -0
@@ -0,0 +1,7 @@ +package main + +import "fmt" + +func main() { + fmt.Println("Hello from Go!") +}
meta/lib/oeqa/runtime/cases/go.py +68 -0
78 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH 18/21 go: remove duplicate arch map in sdk test
In reply to Steve SakomanFrom: Osama Abdelkader <[email protected]>
ARCH_MAP is duplicating an existing map in meta/lib/oe/go.py use oe.go map_arch instead.
(From OE-Core rev: c2ba36f41777d347fd5ffcd9b6862638e5f35a1b)
--- meta/lib/oeqa/sdk/cases/go.py | 31 +++++-------------------------- 1 file changed, 5 insertions(+), 26 deletions(-)
meta/lib/oeqa/sdk/cases/go.py +5 -26
@@ -12,6 +12,7 @@ from oeqa.core.utils.path import remove_safe from oeqa.sdk.case import OESDKTestCase from oeqa.utils.subprocesstweak import errors_have_output +from oe.go import map_arch errors_have_output() class GoCompileTest(OESDKTestCase):
@@ -55,22 +56,6 @@ class GoCompileTest(OESDKTestCase): class GoHostCompileTest(OESDKTestCase): td_vars = ['MACHINE', 'SDK_SYS', 'TARGET_ARCH'] - # Architecture mapping from Yocto/Poky to Go - ARCH_MAP = { - 'aarch64': 'arm64', - 'cortexa57': 'arm64', # ARM Cortex-A57 is ARM64 - 'cortexa72': 'arm64', # ARM Cortex-A72 is ARM64 - 'cortexa53': 'arm64', # ARM Cortex-A53 is ARM64 - 'x86_64': 'amd64', - 'i586': '386', - 'i686': '386', - 'mips': 'mips', - 'mipsel': 'mipsle', - 'powerpc64': 'ppc64', - 'powerpc64le': 'ppc64le', - 'riscv64': 'riscv64', - } - @classmethod def setUpClass(self): # Copy test.go file to SDK directory (same as GCC test uses files_dir)
@@ -94,12 +79,8 @@ class GoHostCompileTest(OESDKTestCase): sdksys = self.td.get("SDK_SYS") arch = sdksys.split('-')[0] - # Handle ARM variants - if arch.startswith('arm'): - return 'arm' - # Use mapping for other architectures - return self.ARCH_MAP.get(arch, arch) + return map_arch(arch) def test_go_cross_compile(self): """Test Go cross-compilation for target"""
@@ -117,12 +98,10 @@ class GoHostCompileTest(OESDKTestCase): # Clean up files with dynamic architecture names files = [os.path.join(self.tc.sdk_dir, f) \ for f in ['test.go', 'go.mod', 'go.sum']] - # Add architecture-specific files using the same mapping - for arch in self.ARCH_MAP.values(): + # Add common architecture-specific files that might be created + common_archs = ['arm64', 'arm', 'amd64', '386', 'mips', 'mipsle', 'ppc64', 'ppc64le', 'riscv64'] + for arch in common_archs: files.extend([os.path.join(self.tc.sdk_dir, f) \ for f in ['test-%s' % arch, 'hello-go-%s' % arch]]) - # Add 'arm' for ARM variants - files.extend([os.path.join(self.tc.sdk_dir, f) \ - for f in ['test-arm', 'hello-go-arm']]) for f in files: remove_safe(f)
Signature · 1 line
2.43.0
PATCH 19/21 oeqa: fix package detection in go sdk tests
In reply to Steve SakomanFrom: Peter Marko <[email protected]>
The test are skipped if architecture contains dash because TARGET_ARCH contains underscore while package name contains dash. Here the translation needs to be done.
Note that poky distro default arch has dash:
MACHINE="qemux86-64"
TARGET_ARCH="x86_64"
ERROR: Nothing PROVIDES 'go-cross-canadian-x86_64'. Close matches:
gcc-cross-canadian-x86-64
gdb-cross-canadian-x86-64
go-cross-canadian-x86-64
TRANSLATED_TARGET_ARCH="x86-64"
Quoting meta/classes-recipe/cross-canadian.bbclass:TRANSLATED_TARGET_ARCH is added into PN
--- meta/lib/oeqa/sdk/cases/go.py | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
meta/lib/oeqa/sdk/cases/go.py +4 -4
@@ -25,9 +25,9 @@ class GoCompileTest(OESDKTestCase): os.path.join(self.tc.sdk_dir, 'test.go')) def setUp(self): - target_arch = self.td.get("TARGET_ARCH") + translated_target_arch = self.td.get("TRANSLATED_TARGET_ARCH") # Check for go-cross-canadian package (uses target architecture) - if not self.tc.hasHostPackage("go-cross-canadian-%s" % target_arch): + if not self.tc.hasHostPackage("go-cross-canadian-%s" % translated_target_arch): raise unittest.SkipTest("GoCompileTest class: SDK doesn't contain a Go cross-canadian toolchain") # Additional runtime check for go command availability
@@ -63,9 +63,9 @@ class GoHostCompileTest(OESDKTestCase): os.path.join(self.tc.sdk_dir, 'test.go')) def setUp(self): - target_arch = self.td.get("TARGET_ARCH") + translated_target_arch = self.td.get("TRANSLATED_TARGET_ARCH") # Check for go-cross-canadian package (uses target architecture) - if not self.tc.hasHostPackage("go-cross-canadian-%s" % target_arch): + if not self.tc.hasHostPackage("go-cross-canadian-%s" % translated_target_arch): raise unittest.SkipTest("GoHostCompileTest class: SDK doesn't contain a Go cross-canadian toolchain") # Additional runtime check for go command availability
Signature · 1 line
2.43.0
PATCH 20/21 oeqa: drop unnecessary dependency from go runtime tests
In reply to Steve SakomanFrom: Peter Marko <[email protected]>
The tests do not use scp command, so openssh-scp is not needed.
--- meta/lib/oeqa/runtime/cases/go.py | 2 -- 1 file changed, 2 deletions(-)
meta/lib/oeqa/runtime/cases/go.py +0 -2
@@ -28,7 +28,6 @@ class GoCompileTest(OERuntimeTestCase): @OEHasPackage('go') @OEHasPackage('go-runtime') @OEHasPackage('go-runtime-dev') - @OEHasPackage('openssh-scp') def test_go_compile(self): # Check if go is available status, output = self.target.run('which go')
@@ -49,7 +48,6 @@ class GoCompileTest(OERuntimeTestCase): @OEHasPackage('go') @OEHasPackage('go-runtime') @OEHasPackage('go-runtime-dev') - @OEHasPackage('openssh-scp') def test_go_module(self): # Check if go is available status, output = self.target.run('which go')
Signature · 1 line
2.43.0
PATCH 21/21 oeqa/sdk/buildepoxy: skip test in eSDK
In reply to Steve SakomanFrom: Peter Marko <[email protected]>
Currently meson inside eSDKs only works with fully populated eSDKs, but our testing uses minimal eSDKS, so skip the test if the eSDK is a minimal build. A bug has been filed to resolve this.
This is minimal change extracted from OE-Core commit which has this only as a minor comment: 575e0bf52db0467d88af4b5fe467b682f10ca62a
--- meta/lib/oeqa/sdk/cases/buildepoxy.py | 4 ++++ 1 file changed, 4 insertions(+)
meta/lib/oeqa/sdk/cases/buildepoxy.py +4 -0
@@ -10,6 +10,7 @@ import tempfile import unittest from oeqa.sdk.case import OESDKTestCase +from oeqa.sdkext.context import OESDKExtTestContext from oeqa.utils.subprocesstweak import errors_have_output errors_have_output()
@@ -22,6 +23,9 @@ class EpoxyTest(OESDKTestCase): if libc in [ 'newlib' ]: raise unittest.SkipTest("MesonTest class: SDK doesn't contain a supported C library") + if isinstance(self.tc, OESDKExtTestContext): + self.skipTest(f"{self.id()} does not support eSDK (https://bugzilla.yoctoproject.org/show_bug.cgi?id=15854)") + if not (self.tc.hasHostPackage("nativesdk-meson") or self.tc.hasHostPackage("meson-native")): raise unittest.SkipTest("EpoxyTest class: SDK doesn't contain Meson")
Signature · 1 line
2.43.0