Add Richtek RT8092 support
Subsystems (2)
cover Add Richtek RT8092 support
From: ChiYuan Huang <[email protected]>
This patch series add rt8092 regulator support.
ChiYuan Huang (2):
dt-bindings: regulator: rt5739: Add compatible for rt8092
regulator: Add rt8092 support
.../bindings/regulator/richtek,rt5739.yaml | 5 + drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/rt8092.c | 313 ++++++++++++++++++ 4 files changed, 328 insertions(+) create mode 100644 drivers/regulator/rt8092.c
base-commit: ea1013c1539270e372fc99854bc6e4d94eaeff66
Signature · 1 line
2.34.1
PATCH 1/2 dt-bindings: regulator: rt5739: Add compatible for rt8092
From: ChiYuan Huang <[email protected]>
Append rt8092 compatible in rt5739 document.
Compared to rt5739, RT8092 can offer up to 4A output current.
--- .../devicetree/bindings/regulator/richtek,rt5739.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml +5 -0
@@ -15,6 +15,10 @@ description: | supply of 2.5V to 5.5V. It can provide up to 3.5A continuous current capability at over 80% high efficiency. + The RT8092 is similar type buck converter. Compared to RT5739, it can offer + up to 4A output current and more output voltage range to meet the application + on most mobile products. + allOf: - $ref: regulator.yaml#
@@ -23,6 +27,7 @@ properties: enum: - richtek,rt5733 - richtek,rt5739 + - richtek,rt8092 reg: maxItems: 1
Signature · 1 line
2.34.1
PATCH 2/2 regulator: Add rt8092 support
In reply to [email protected]From: ChiYuan Huang <[email protected]>
RT8092 is a 3MHz 4A efficiency step-down converter with I2C control interface. It can support wide output range from 0.7 to 5.5V, based on the voltage bank selection.
--- drivers/regulator/Kconfig | 9 ++ drivers/regulator/Makefile | 1 + drivers/regulator/rt8092.c | 313 +++++++++++++++++++++++++++++++++++++ 3 files changed, 323 insertions(+) create mode 100644 drivers/regulator/rt8092.c
drivers/regulator/Kconfig +9 -0
@@ -1394,6 +1394,15 @@ config REGULATOR_RT6245 It can support up to 14A output current and adjustable output voltage from 0.4375V to 1.3875V, per step 12.5mV. +config REGULATOR_RT8092 + tristate "Richtek RT8092 voltage regulator" + depends on I2C + select REGMAP_I2C + help + The RT8092 is a peak-current mode PWM step-down DC/DC converter with + I2C control interface. It is capable of delivering 4A continuing + current over a wide input range from 2.5V to 5.5V. + config REGULATOR_RTQ2134 tristate "Richtek RTQ2134 SubPMIC Regulator" depends on I2C
drivers/regulator/Makefile +1 -0
@@ -161,6 +161,7 @@ obj-$(CONFIG_REGULATOR_RT5759) += rt5759-regulator.o obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o obj-$(CONFIG_REGULATOR_RT6190) += rt6190-regulator.o obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o +obj-$(CONFIG_REGULATOR_RT8092) += rt8092.o obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o obj-$(CONFIG_REGULATOR_RTQ6752) += rtq6752-regulator.o
drivers/regulator/rt8092.c new file +313 -0
313 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH 1/2] dt-bindings: regulator: rt5739: Add compatible for rt8092
In reply to [email protected]Quoted 10 lines · On Fri, Dec 19, 2025 at 02:36:19PM +0800, [email protected] wrote:
From: ChiYuan Huang <[email protected]>
Append rt8092 compatible in rt5739 document.
Compared to rt5739, RT8092 can offer up to 4A output current.
Signed-off-by ChiYuan Huang <[email protected]>--- .../devicetree/bindings/regulator/richtek,rt5739.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Best regards,
Krzysztof
Mark Brown
maintainerQuoted 6 lines · On Fri, 19 Dec 2025 14:36:18 +0800, [email protected] wrote:
This patch series add rt8092 regulator support.
ChiYuan Huang (2):
dt-bindings: regulator: rt5739: Add compatible for rt8092
regulator: Add rt8092 support
Quoted 8 lines
.../bindings/regulator/richtek,rt5739.yaml | 5 + drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/rt8092.c | 313 ++++++++++++++++++ 4 files changed, 328 insertions(+) create mode 100644 drivers/regulator/rt8092.c[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] dt-bindings: regulator: rt5739: Add compatible for rt8092
commit: e5eb5638d632cf1180454acf16391ea9450e6295
[2/2] regulator: Add rt8092 support
commit: 32a708ba5db50cf928a1f1b2039ceef33de2c286All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark