arm: dts: socfpga: agilex5: Improve MMC/SD device tree organization
cover arm: dts: socfpga: agilex5: Improve MMC/SD device tree organization
From: tzeyeeng <[email protected]>
This patch series refactors the MMC/SD device tree configuration for Agilex5 SOCDK to improve maintainability and correctness.
The first patch reorganizes the configuration by moving board-specific MMC properties from the common u-boot.dtsi to the board-specific dts file, keeping only truly common configurations in the shared dtsi.
The second patch addresses a configuration issue where the eMMC device tree was incorrectly inheriting SD card-specific properties. It removes the SD UHS speed mode properties (sd-uhs-sdr50, sd-uhs-sdr104) that are not applicable to eMMC and properly configures the capabilities mask to enable 8-bit embedded device support.
tzeyeeng (2):
arm: dts: socfpga: agilex5: Move mmc node differs from base board dtsi
to dts
arm: dts: socfpga: Remove SD card properties from Agilex5 eMMC device
tree
arch/arm/dts/socfpga_agilex5_socdk-u-boot.dtsi | 1 - arch/arm/dts/socfpga_agilex5_socdk.dts | 6 ++++++ arch/arm/dts/socfpga_agilex5_socdk_emmc.dts | 4 +++- 3 files changed, 9 insertions(+), 2 deletions(-)
Signature · 1 line
2.43.7
PATCH 1/2 arm: dts: socfpga: agilex5: Move mmc node differs from base board dtsi to dts
From: tzeyeeng <[email protected]>
The purpose of this change is to keep common configuration in socfpga_agilex5_socdk-u-boot.dtsi and move differs to socfpga_agilex5_socdk.dts.
--- arch/arm/dts/socfpga_agilex5_socdk-u-boot.dtsi | 1 - arch/arm/dts/socfpga_agilex5_socdk.dts | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletion(-)
arch/arm/dts/socfpga_agilex5_socdk-u-boot.dtsi +0 -1
@@ -118,7 +118,6 @@ vqmmc-supply = <&sd_io_1v8_reg>; max-frequency = <200000000>; sdhci-caps = <0x00000000 0x0000c800>; - sdhci-caps-mask = <0x00002000 0x0000ff00>; /* SD card default speed (DS) and UHS-I SDR12 mode timing configuration */ cdns,phy-dqs-timing-delay-sd-ds = <0x00780000>;
arch/arm/dts/socfpga_agilex5_socdk.dts +6 -0
@@ -74,6 +74,12 @@ status = "okay"; }; +&mmc { + sd-uhs-sdr50; + sd-uhs-sdr104; + sdhci-caps-mask = <0x00002000 0x0000ff00>; +}; + &uart0 { status = "okay"; };
Signature · 1 line
2.43.7
PATCH 2/2 arm: dts: socfpga: Remove SD card properties from Agilex5 eMMC device tree
In reply to [email protected]From: tzeyeeng <[email protected]>
eMMC inherit the configuration from socfpga_agilex5_socdk.dts, including the SD card properties.
Changes:
- Remove sd-uhs-sdr50 and sd-uhs-sdr104, which are SD card speed mode from eMMC device tree.
- Set SDHCI Capabilities bit18 to enable 8-bit embedded device support.
--- arch/arm/dts/socfpga_agilex5_socdk_emmc.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/arm/dts/socfpga_agilex5_socdk_emmc.dts +3 -1
@@ -18,6 +18,8 @@ }; &mmc { + /delete-property/ sd-uhs-sdr50; + /delete-property/ sd-uhs-sdr104; status = "okay"; no-sd;
@@ -32,7 +34,7 @@ vqmmc-supply = <&emmc_io_1v8_reg>; max-frequency = <200000000>; sdhci-caps = <0x00000000 0x0004c800>; /* SDHCI_CAN_DO_8BIT */ - sdhci-caps-mask = <0x00000000 0x0000ff00>; + sdhci-caps-mask = <0x00000000 0x0004ff00>; /* eMMC legacy mode timing configuration */ cdns,phy-dqs-timing-delay-sd-ds = <0x00780000>;
Signature · 1 line
2.43.7