riscv: add initial sdext support
PATCH v6 3/7 target/riscv: add sdext Debug Mode helpers
In reply to Chao LiuRISC-V Debug Specification:
https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
Add helpers to enter/leave Debug Mode and to update dpc/dcsr. Model resume without a Debug Module by leaving Debug Mode at cpu_exec_enter and continuing from dpc.
--- target/riscv/cpu.h | 3 ++ target/riscv/cpu_helper.c | 84 ++++++++++++++++++++++++++++++++++++++ target/riscv/debug.c | 5 +++ target/riscv/tcg/tcg-cpu.c | 14 +++++++ 4 files changed, 106 insertions(+)
target/riscv/cpu.h +3 -0
@@ -624,6 +624,9 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,char *riscv_isa_string (RISCVCPU *cpu);int riscv_cpu_max_xlen (RISCVCPUClass *mcc);bool riscv_cpu_option_set (const char *optname); +void riscv_cpu_enter_debug_mode (CPURISCVState *env,target_ulong pc, +uint32_t cause); +void riscv_cpu_leave_debug_mode (CPURISCVState *env);#ifndef CONFIG_USER_ONLY void riscv_cpu_do_interrupt (CPUState *cpu);
target/riscv/cpu_helper.c +84 -0
90 lines not on this page · raw message
target/riscv/debug.c +5 -0
@@ -927,6 +927,11 @@ void riscv_cpu_debug_excp_handler(CPUState *cs)RISCVCPU *cpu =RISCV_CPU (cs);CPURISCVState *env = &cpu->env; +/* Triggers must not match or fire while in Debug Mode. */ +if (env->debug_mode) { +return ; + } +if (cs->watchpoint_hit) {if (cs->watchpoint_hit->flags &BP_CPU ) {do_trigger_action (env,DBG_ACTION_BP );
target/riscv/tcg/tcg-cpu.c +14 -0
@@ -266,6 +266,19 @@ static vaddr riscv_pointer_wrap(CPUState *cs, int mmu_idx, }return extract64 (result,0 ,64 - pm_len); } + +static void riscv_cpu_exec_enter (CPUState *cs) +{ +RISCVCPU *cpu =RISCV_CPU (cs); +CPURISCVState *env = &cpu->env; + +if (!cpu->cfg.ext_sdext || !env->debug_mode) { +return ; + } +target_ulong pc = env->dpc; +riscv_cpu_leave_debug_mode (env); + env->pc = pc; +}#endif const TCGCPUOps riscv_tcg_ops = {
@@ -282,6 +295,7 @@ const TCGCPUOps riscv_tcg_ops = {#ifndef CONFIG_USER_ONLY .tlb_fill = riscv_cpu_tlb_fill, .pointer_wrap = riscv_pointer_wrap, + .cpu_exec_enter = riscv_cpu_exec_enter, .cpu_exec_interrupt = riscv_cpu_exec_interrupt, .cpu_exec_halt = riscv_cpu_has_work, .cpu_exec_reset = cpu_reset,
Signature · 1 line
2.53.0
PATCH v6 4/7 target/riscv: add dret instruction
In reply to Chao LiuRISC-V Debug Specification:
https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
Add DRET decode/translate and a helper to leave Debug Mode and return to dpc. Executing DRET outside Debug Mode raises illegal instruction.
--- target/riscv/helper.h | 1 + target/riscv/insn32.decode | 1 + target/riscv/insn_trans/trans_privileged.c.inc | 18 ++++++++++++++++++ target/riscv/op_helper.c | 16 ++++++++++++++++ 4 files changed, 36 insertions(+)
target/riscv/helper.h +1 -0
@@ -133,6 +133,7 @@ DEF_HELPER_6(csrrw_i128, tl, env, int, tl, tl, tl, tl)#ifndef CONFIG_USER_ONLY DEF_HELPER_1(sret, tl, env) DEF_HELPER_1(mret, tl, env) +DEF_HELPER_1(dret, tl, env) DEF_HELPER_1(mnret, tl, env) DEF_HELPER_1(ctr_clear, void, env)DEF_HELPER_1 (wfi, void, env)
target/riscv/insn32.decode +1 -0
@@ -118,6 +118,7 @@ sctrclr 000100000100 00000 000 00000 1110011 uret 0000000 00010 00000 000 00000 1110011 sret 0001000 00010 00000 000 00000 1110011 mret 0011000 00010 00000 000 00000 1110011 +dret 0111101 10010 00000 000 00000 1110011 wfi 0001000 00101 00000 000 00000 1110011 sfence_vma 0001001 ..... ..... 000 00000 1110011 @sfence_vma
target/riscv/insn_trans/trans_privileged.c.inc +18 -0
@@ -125,6 +125,24 @@ static bool trans_mret(DisasContext *ctx, arg_mret *a) #endif } +static bool trans_dret(DisasContext *ctx, arg_dret *a) +{ +#ifndef CONFIG_USER_ONLY + if (!ctx->cfg_ptr->ext_sdext) { + return false; + } + decode_save_opc(ctx, 0); + translator_io_start(&ctx->base); + gen_update_pc(ctx, 0); + gen_helper_dret(cpu_pc, tcg_env); + exit_tb(ctx); /* no chaining */ + ctx->base.is_jmp = DISAS_NORETURN; + return true; +#else + return false; +#endif +} + static bool trans_mnret(DisasContext *ctx, arg_mnret *a) { #ifndef CONFIG_USER_ONLY
target/riscv/op_helper.c +16 -0
@@ -440,6 +440,22 @@ target_ulong helper_mret(CPURISCVState *env)return retpc; } +target_ulong helper_dret (CPURISCVState *env) +{ +uintptr_t ra =GETPC (); +#ifdef CONFIG_USER_ONLY +riscv_raise_exception (env,RISCV_EXCP_ILLEGAL_INST , ra); +return 0 ; +#else +if (!riscv_cpu_cfg (env)->ext_sdext || !env->debug_mode) { +riscv_raise_exception (env,RISCV_EXCP_ILLEGAL_INST , ra); + } +target_ulong retpc = env->dpc &get_xepc_mask (env); +riscv_cpu_leave_debug_mode (env); +return retpc; +#endif +} +target_ulong helper_mnret (CPURISCVState *env) {target_ulong retpc = env->mnepc;
Signature · 1 line
2.53.0
v6 cover riscv: add initial sdext support
Hi,
This v6 series is rebased on Alistair's riscv-to-apply.next branch [1].
The implementation follows RISC-V Debug Specification 1.0 [2].
It introduces the sdext/sdtrig config bits, DCSR/DPC/DSCRATCH state, Debug Mode enter/leave helpers, DRET, EBREAK entry, single-step, and trigger action=debug mode.
To reduce review load, this series focuses on the Sdext features first. The Debug Module (DM) and related flows will follow in a later series.
Changes in v6:
- Rebased onto latest riscv-to-apply.next
Changes in v5:
- Patch 2: removed redundant cpu->cfg.ext_sdext = false; in riscv_cpu_init() since it's already set to false in MULTI_EXT_CFG_BOOL. (Daniel)
- Patch 7: changed LOG_UNIMP to LOG_GUEST_ERROR for invalid trigger action=debug mode when Sdext is not enabled. LOG_UNIMP is reserved for unimplemented features, while LOG_GUEST_ERROR is for invalid guest actions. (Daniel)
Changes in v4:
- Fixed linux-user build errors: moved debug_mode/dcsr/dpc/dscratch fields inside #ifndef CONFIG_USER_ONLY block in cpu.h, and wrapped all code using these fields with proper guards. (Daniel)
- Updated dependency from single patch (patch 5 only) to patches 1-5 of Max Chou's "Add Zvfbfa extension support" v2 series to avoid compilation errors.
Changes in v3:
- Rebase onto Alistair's riscv-to-apply.next branch.
- Depend on Max Chou's patch "target/riscv: Use the tb->cs_bqse as the extend tb flags." (not included; apply it first) [3].
- Patch 2: default sdext to false in riscv_cpu_extensions.
Changes in v2:
- Drop the RHCT expected AML update from this series.
- Replace the split sdext/sdtrig config bits patch with deprecating the 'debug' CPU property.
- Rebase and update patch subjects to target/riscv prefix.
Changes in v1:
- Debug Mode entry/exit updates DCSR/DPC and restores execution via DRET.
- EBREAK honors DCSR ebreak bits and enters Debug Mode when enabled.
- Single-step uses DCSR.STEP with a TB flag and a helper at TB exit. It references Max Chou's patch "target/riscv: Use the tb->cs_bqse as the extend tb flags." [3].
- Sdtrig supports action=debug mode for mcontrol/mcontrol6 and reports inst-count triggers in tinfo.
---
Differences vs Debug Spec (known gaps):
- No Debug Module (no DMI, dmcontrol/dmstatus, haltreq/resumereq).
- No debug ROM, program buffer, abstract commands, or SBA.
- Resume is modeled by leaving Debug Mode at cpu_exec_enter.
- Step/exception ordering is simplified: if the stepped instruction traps, the normal exception is taken and Debug Mode is not forced.
- Several DCSR fields are not fully modeled (stopcount/stoptime, etc).
Roadmap (next stage, DM focus):
1) Add a DM core with DMI access and hart state tracking.
2) Implement halt/resume handshake and move Debug Mode transitions under DM control.
3) Add debug ROM, program buffer, and abstract commands for GPR/CSR and memory access.
4) Add SBA if required by tooling.
5) Tighten ordering rules for step/exception/trigger priorities.
CI (all jobs passed except check-patch which flags pre-existing upstream style issues, not related to this series) [4].
References:
[1] https://github.com/alistair23/qemu/tree/riscv-to-apply.next
[2] https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
[3] https://lore.kernel.org/qemu-devel/[email protected]/
[4] https://gitlab.com/TaoTang/qemu/-/pipelines/2446308835
Thanks,
Chao
Chao Liu (6):
target/riscv: add sdext debug CSRs state target/riscv: add sdext Debug Mode helpers target/riscv: add dret instruction target/riscv: add sdext enter Debug Mode on ebreak target/riscv: add sdext single-step support target/riscv: add sdtrig trigger action=debug mode
Daniel Henrique Barboza (1):
target/riscv: deprecate 'debug' CPU property
docs/about/deprecated.rst | 7 + include/exec/translation-block.h | 4 +- target/riscv/cpu.c | 59 +++++++- target/riscv/cpu.h | 9 ++ target/riscv/cpu_bits.h | 33 +++++ target/riscv/cpu_cfg_fields.h.inc | 3 +- target/riscv/cpu_helper.c | 90 ++++++++++++ target/riscv/csr.c | 128 +++++++++++++++++- target/riscv/debug.c | 58 +++++++- target/riscv/helper.h | 3 + target/riscv/insn32.decode | 1 + .../riscv/insn_trans/trans_privileged.c.inc | 24 ++++ target/riscv/machine.c | 44 ++++-- target/riscv/op_helper.c | 70 ++++++++++ target/riscv/tcg/tcg-cpu.c | 21 ++- target/riscv/translate.c | 15 +- 16 files changed, 544 insertions(+), 25 deletions(-)
Signature · 1 line
2.53.0
PATCH v6 5/7 target/riscv: add sdext enter Debug Mode on ebreak
RISC-V Debug Specification:
https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
Route EBREAK via helper_sdext_ebreak. If Sdext is enabled and the matching dcsr.ebreak* bit is set, enter Debug Mode with cause=ebreak and stop with EXCP_DEBUG. Otherwise keep the normal breakpoint trap.
--- target/riscv/helper.h | 1 + .../riscv/insn_trans/trans_privileged.c.inc | 6 ++++ target/riscv/op_helper.c | 34 +++++++++++++++++++ 3 files changed, 41 insertions(+)
target/riscv/helper.h +1 -0
@@ -143,6 +143,7 @@ DEF_HELPER_1(tlb_flush_all, void, env)DEF_HELPER_4 (ctr_add_entry, void, env, tl, tl, tl) /* Native Debug */ DEF_HELPER_1(itrigger_match, void, env) +DEF_HELPER_2(sdext_ebreak, void, env, tl)#endif /* Hypervisor functions */
target/riscv/insn_trans/trans_privileged.c.inc +6 -0
@@ -68,9 +68,15 @@ static bool trans_ebreak(DisasContext *ctx, arg_ebreak *a) if (pre == 0x01f01013 && ebreak == 0x00100073 && post == 0x40705013) { generate_exception(ctx, RISCV_EXCP_SEMIHOST); } else { +#ifndef CONFIG_USER_ONLY + gen_update_pc(ctx, 0); + gen_helper_sdext_ebreak(tcg_env, tcg_constant_tl(ebreak_addr)); + ctx->base.is_jmp = DISAS_NORETURN; +#else tcg_gen_st_tl(tcg_constant_tl(ebreak_addr), tcg_env, offsetof(CPURISCVState, badaddr)); generate_exception(ctx, RISCV_EXCP_BREAKPOINT); +#endif } return true; }
target/riscv/op_helper.c +34 -0
@@ -456,6 +456,40 @@ target_ulong helper_dret(CPURISCVState *env)#endif } +void helper_sdext_ebreak (CPURISCVState *env,target_ulong pc) +{ +CPUState *cs =env_cpu (env); +bool enter_debug = false; + +if (riscv_cpu_cfg (env)->ext_sdext && !env->debug_mode) { +if (env->virt_enabled) { +if (env->priv ==PRV_S ) { + enter_debug = env->dcsr &DCSR_EBREAKVS ; + }else if (env->priv ==PRV_U ) { + enter_debug = env->dcsr &DCSR_EBREAKVU ; + } + }else { +if (env->priv ==PRV_M ) { + enter_debug = env->dcsr &DCSR_EBREAKM ; + }else if (env->priv ==PRV_S ) { + enter_debug = env->dcsr &DCSR_EBREAKS ; + }else if (env->priv ==PRV_U ) { + enter_debug = env->dcsr &DCSR_EBREAKU ; + } + } + } + + env->badaddr = pc; + +if (enter_debug) { +riscv_cpu_enter_debug_mode (env, pc,DCSR_CAUSE_EBREAK ); + cs->exception_index =EXCP_DEBUG ; +cpu_loop_exit_restore (cs,GETPC ()); + } + +riscv_raise_exception (env,RISCV_EXCP_BREAKPOINT ,GETPC ()); +} +target_ulong helper_mnret (CPURISCVState *env) {target_ulong retpc = env->mnepc;
Signature · 1 line
2.53.0
PATCH v6 6/7 target/riscv: add sdext single-step support
In reply to Chao LiuRISC-V Debug Specification:
https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
Use a TB flag when dcsr.step is set (and we are not in Debug Mode). When the flag is on, build 1-insn TBs and do not chain to the next TB. Add a TB-exit helper that enters Debug Mode with cause=step and sets dpc to the next pc, then stops with EXCP_DEBUG.
If dcsr.stepie is 0, do not take interrupts while stepping. Treat WFI as a nop so the hart does not sleep during a step.
PS: This patch references Max Chou's handling of ext_tb_flags.
https://lore.kernel.org/qemu-devel/[email protected]/
--- include/exec/translation-block.h | 4 ++-- target/riscv/cpu.h | 2 ++ target/riscv/cpu_helper.c | 6 ++++++ target/riscv/helper.h | 1 + target/riscv/op_helper.c | 20 ++++++++++++++++++++ target/riscv/tcg/tcg-cpu.c | 5 +++++ target/riscv/translate.c | 15 +++++++++++++-- 7 files changed, 49 insertions(+), 4 deletions(-)
include/exec/translation-block.h +2 -2
@@ -64,8 +64,8 @@ struct TranslationBlock {* x86: the original user, the Code Segment virtual base, * arm: an extension of tb->flags, * s390x: instruction data for EXECUTE, -* sparc: the next pc of the instruction queue (for delay slots). -* riscv: an extension of tb->flags, +* sparc: the next pc of the instruction queue (for delay slots), +* riscv: an extension of tb->flags. */ uint64_t cs_base;
target/riscv/cpu.h +2 -0
@@ -712,6 +712,8 @@ FIELD(TB_FLAGS, PM_SIGNEXTEND, 31, 1) FIELD(EXT_TB_FLAGS, MISA_EXT, 0, 32)FIELD (EXT_TB_FLAGS ,ALTFMT ,32 ,1 ) +/* sdext single-step needs a TB flag to build 1-insn TBs */ +FIELD(EXT_TB_FLAGS, SDEXT_STEP, 33, 1)#ifdef TARGET_RISCV32 #define riscv_cpu_mxl (env) ((void)(env), MXL_RV32)
target/riscv/cpu_helper.c +6 -0
@@ -635,6 +635,12 @@ bool riscv_cpu_exec_interrupt(CPUState *cs, int interrupt_request)if (interrupt_request & mask) {RISCVCPU *cpu =RISCV_CPU (cs);CPURISCVState *env = &cpu->env; + +if (cpu->cfg.ext_sdext && !env->debug_mode && + (env->dcsr &DCSR_STEP ) && !(env->dcsr &DCSR_STEPIE )) { +return false; + } +int interruptno =riscv_cpu_local_irq_pending (env);if (interruptno >=0 ) { cs->exception_index =RISCV_EXCP_INT_FLAG | interruptno;
target/riscv/helper.h +1 -0
@@ -143,6 +143,7 @@ DEF_HELPER_1(tlb_flush_all, void, env)DEF_HELPER_4 (ctr_add_entry, void, env, tl, tl, tl) /* Native Debug */ DEF_HELPER_1(itrigger_match, void, env) +DEF_HELPER_1(sdext_step, void, env) DEF_HELPER_2(sdext_ebreak, void, env, tl)#endif
target/riscv/op_helper.c +20 -0
@@ -456,6 +456,22 @@ target_ulong helper_dret(CPURISCVState *env)#endif } +void helper_sdext_step (CPURISCVState *env) +{ +#ifndef CONFIG_USER_ONLY +CPUState *cs =env_cpu (env); + +if (!riscv_cpu_cfg (env)->ext_sdext || env->debug_mode || + !(env->dcsr &DCSR_STEP )) { +return ; + } + +riscv_cpu_enter_debug_mode (env, env->pc,DCSR_CAUSE_STEP ); + cs->exception_index =EXCP_DEBUG ; +cpu_loop_exit_restore (cs,GETPC ()); +#endif +} +void helper_sdext_ebreak (CPURISCVState *env,target_ulong pc) {CPUState *cs =env_cpu (env);
@@ -588,6 +604,10 @@ void helper_wfi(CPURISCVState *env) (prv_u || (prv_s && get_field(env->hstatus, HSTATUS_VTW)))) { riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, GETPC()); } else { +if (riscv_cpu_cfg (env)->ext_sdext && !env->debug_mode && + (env->dcsr &DCSR_STEP )) { +return ; + } cs->halted =1 ; cs->exception_index =EXCP_HLT ;cpu_loop_exit (cs);
target/riscv/tcg/tcg-cpu.c +5 -0
@@ -193,6 +193,11 @@ static TCGTBCPUState riscv_get_tb_cpu_state(CPUState *cs) flags =FIELD_DP32 (flags,TB_FLAGS ,PM_SIGNEXTEND , pm_signext); ext_flags =FIELD_DP64 (ext_flags,EXT_TB_FLAGS ,MISA_EXT , env->misa_ext); +#ifndef CONFIG_USER_ONLY +if (cpu->cfg.ext_sdext && !env->debug_mode && (env->dcsr &DCSR_STEP )) { + ext_flags =FIELD_DP64 (ext_flags,EXT_TB_FLAGS ,SDEXT_STEP ,1 ); + } +#endif return (TCGTBCPUState ){ .pc = env->xl ==MXL_RV32 ? env->pc &UINT32_MAX : env->pc,
target/riscv/translate.c +13 -2
@@ -111,6 +111,8 @@ typedef struct DisasContext {bool ztso;/* Use icount trigger for native debug */ bool itrigger; +/* Enter Debug Mode after next instruction (sdext single-step). */ +bool sdext_step;/* FRM is known to contain a valid value. */ bool frm_valid;bool insn_start_updated;
@@ -293,6 +295,9 @@ static void lookup_and_goto_ptr(DisasContext *ctx)if (ctx->itrigger) {gen_helper_itrigger_match (tcg_env); } +if (ctx->sdext_step) { +gen_helper_sdext_step (tcg_env); + }#endif tcg_gen_lookup_and_goto_ptr (); }
@@ -303,6 +308,9 @@ static void exit_tb(DisasContext *ctx)if (ctx->itrigger) {gen_helper_itrigger_match (tcg_env); } +if (ctx->sdext_step) { +gen_helper_sdext_step (tcg_env); + }#endif tcg_gen_exit_tb (NULL ,0 ); }
@@ -316,7 +324,8 @@ static void gen_goto_tb(DisasContext *ctx, unsigned tb_slot_idx,* Under itrigger, instruction executes one by one like singlestep, * direct block chain benefits will be small. */ -if (translator_use_goto_tb (&ctx->base, dest) && !ctx->itrigger) { +if (translator_use_goto_tb (&ctx->base, dest) && + !ctx->itrigger && !ctx->sdext_step) {/* * For pcrel, the pc must always be up-to-date on entry to * the linked TB, so that it can use simple additions for all
@@ -1357,6 +1366,7 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) ctx->bcfi_enabled =FIELD_EX32 (tb_flags,TB_FLAGS ,BCFI_ENABLED ); ctx->fcfi_lp_expected =FIELD_EX32 (tb_flags,TB_FLAGS ,FCFI_LP_EXPECTED ); ctx->fcfi_enabled =FIELD_EX32 (tb_flags,TB_FLAGS ,FCFI_ENABLED ); + ctx->sdext_step =FIELD_EX64 (ext_tb_flags,EXT_TB_FLAGS ,SDEXT_STEP ); ctx->zero =tcg_constant_tl (0 ); ctx->virt_inst_excp = false; ctx->decoders = cpu->decoders;
@@ -1407,7 +1417,8 @@ static void riscv_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)/* Only the first insn within a TB is allowed to cross a page boundary. */ if (ctx->base.is_jmp ==DISAS_NEXT ) { -if (ctx->itrigger || !translator_is_same_page (&ctx->base, ctx->base.pc_next)) { +if (ctx->itrigger || ctx->sdext_step || + !translator_is_same_page (&ctx->base, ctx->base.pc_next)) { ctx->base.is_jmp =DISAS_TOO_MANY ; }else {unsigned page_ofs = ctx->base.pc_next & ~TARGET_PAGE_MASK ;
Signature · 1 line
2.53.0
PATCH v6 1/7 target/riscv: deprecate 'debug' CPU property
In reply to Chao LiuFrom: Daniel Henrique Barboza <[email protected]>
Starting on commit f31ba686a9 ("target/riscv/cpu.c: add 'sdtrig' in riscv,isa') the 'debug' flag has been used as an alias for 'sdtrig'.
We're going to add more debug trigger extensions, e.g. 'sdext' [1]. And all of a sudden the existence of this flag is now weird. Do we keep it as a 'sdtrig' only or do we add 'sdext'?
The solution proposed here is to deprecate it. The flag was introduced a long time ago as a way to encapsulate support for all debug related CSRs. Today we have specific debug trigger extensions and there's no more use for a generic 'debug' flag. Users should be encouraged to enable/disable extensions directly instead of using "made-up" flags that exists only in a QEMU context.
The following changes are made:
- 'ext_sdtrig' flag was added in cpu->cfg. 'debug' flag was removed from cpu->cfg;
- All occurrences of cpu->cfg.debug were replaced to 'ext_sdtrig';
- Two explicit getters and setters for the 'debug' property were added. The property will simply get/set ext_sdtrig;
- vmstate_debug was renamed to vmstate_sdtrig. We're aware that this will impact migration between QEMU 10.2 to newer versions, but we're still in a point where the migration break cost isn't big enough to justify adding migration compatibility scaffolding.
Finally, deprecated.rst was updated to deprecate 'debug' and encourage users to use 'ext_sdtrig' instead.
[1] https://lore.kernel.org/qemu-devel/[email protected]/
--- docs/about/deprecated.rst | 7 +++++ target/riscv/cpu.c | 51 ++++++++++++++++++++++++++++--- target/riscv/cpu_cfg_fields.h.inc | 2 +- target/riscv/csr.c | 2 +- target/riscv/machine.c | 24 +++++++-------- target/riscv/tcg/tcg-cpu.c | 2 +- 6 files changed, 69 insertions(+), 19 deletions(-)
docs/about/deprecated.rst +7 -0
@@ -452,6 +452,13 @@ It was implemented as a no-op instruction in TCG up to QEMU 9.0, but only with ``-cpu max`` (which does not guarantee migration compatibility across versions). +``debug=true|false`` on RISC-V CPUs (since 11.0) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +This option, since QEMU 10.1, has been a simple alias to the ``sdtrig`` +extension. Users are advised to enable/disable ``sdtrig`` directly instead +of using ``debug``. + Backwards compatibility -----------------------
target/riscv/cpu.c +47 -4
88 lines not on this page · raw message
target/riscv/cpu_cfg_fields.h.inc +1 -1
@@ -46,6 +46,7 @@ BOOL_FIELD(ext_zilsd) BOOL_FIELD(ext_zimop) BOOL_FIELD(ext_zcmop) BOOL_FIELD(ext_ztso) +BOOL_FIELD(ext_sdtrig) BOOL_FIELD(ext_smstateen) BOOL_FIELD(ext_sstc) BOOL_FIELD(ext_smcdeleg)
@@ -159,7 +160,6 @@ BOOL_FIELD(ext_xlrbr) BOOL_FIELD(mmu) BOOL_FIELD(pmp) -BOOL_FIELD(debug) BOOL_FIELD(misa_w) BOOL_FIELD(short_isa_string)
target/riscv/csr.c +1 -1
@@ -776,7 +776,7 @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno)static RISCVException debug (CPURISCVState *env,int csrno) { -if (riscv_cpu_cfg (env)->debug) { +if (riscv_cpu_cfg (env)->ext_sdtrig) {return RISCV_EXCP_NONE ; }
target/riscv/machine.c +12 -12
@@ -218,14 +218,14 @@ static const VMStateDescription vmstate_kvmtimer = { };#endif -static bool debug_needed (void *opaque) +static bool sdtrig_needed (void *opaque) {RISCVCPU *cpu = opaque; -return cpu->cfg.debug; +return cpu->cfg.ext_sdtrig; } -static int debug_post_load (void *opaque,int version_id) +static int sdtrig_post_load (void *opaque,int version_id) {RISCVCPU *cpu = opaque;CPURISCVState *env = &cpu->env;
@@ -237,12 +237,12 @@ static int debug_post_load(void *opaque, int version_id)return 0 ; } -static const VMStateDescription vmstate_debug = { - .name ="cpu/debug" , - .version_id =2 , - .minimum_version_id =2 , - .needed = debug_needed, - .post_load = debug_post_load, +static const VMStateDescription vmstate_sdtrig = { + .name ="cpu/sdtrig" , + .version_id =1 , + .minimum_version_id =1 , + .needed = sdtrig_needed, + .post_load = sdtrig_post_load, .fields = (const VMStateField []) {VMSTATE_UINTTL (env.trigger_cur,RISCVCPU ),VMSTATE_UINTTL_ARRAY (env.tdata1,RISCVCPU ,RV_MAX_TRIGGERS ),
@@ -425,8 +425,8 @@ static const VMStateDescription vmstate_sstc = {const VMStateDescription vmstate_riscv_cpu = { .name ="cpu" , - .version_id =11 , - .minimum_version_id =11 , + .version_id =12 , + .minimum_version_id =12 , .post_load = riscv_cpu_post_load, .fields = (const VMStateField []) {VMSTATE_UINTTL_ARRAY (env.gpr,RISCVCPU ,32 ),
@@ -492,13 +492,13 @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_kvmtimer, #endif &vmstate_envcfg, - &vmstate_debug, &vmstate_smstateen, &vmstate_jvt, &vmstate_elp, &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_sdtrig,NULL } };
target/riscv/tcg/tcg-cpu.c +1 -1
@@ -180,7 +180,7 @@ static TCGTBCPUState riscv_get_tb_cpu_state(CPUState *cs) ? EXT_STATUS_DIRTY : EXT_STATUS_DISABLED; } -if (cpu->cfg.debug && !icount_enabled ()) { +if (cpu->cfg.ext_sdtrig && !icount_enabled ()) { flags =FIELD_DP32 (flags,TB_FLAGS ,ITRIGGER , env->itrigger_enabled); }#endif
Signature · 1 line
2.53.0
PATCH v6 7/7 target/riscv: add sdtrig trigger action=debug mode
In reply to Chao LiuRISC-V Debug Specification:
https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
Allow mcontrol/mcontrol6 action=1 when Sdext is enabled. When such a trigger hits, enter Debug Mode with cause=trigger and stop with EXCP_DEBUG.
Also report inst-count triggers in tinfo and read their action field.
--- target/riscv/debug.c | 53 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-)
target/riscv/debug.c +51 -2
@@ -110,6 +110,8 @@ static trigger_action_t get_trigger_action(CPURISCVState *env, action = (tdata1 &TYPE6_ACTION ) >>12 ;break ;case TRIGGER_TYPE_INST_CNT : + action = tdata1 &ITRIGGER_ACTION ; +break ;case TRIGGER_TYPE_INT :case TRIGGER_TYPE_EXCP :case TRIGGER_TYPE_EXT_SRC :
@@ -280,6 +282,7 @@ static target_ulong textra_validate(CPURISCVState *env, target_ulong tdata3)static void do_trigger_action (CPURISCVState *env,target_ulong trigger_index) { +CPUState *cs =env_cpu (env);trigger_action_t action =get_trigger_action (env, trigger_index);switch (action) {
@@ -289,6 +292,21 @@ static void do_trigger_action(CPURISCVState *env, target_ulong trigger_index)riscv_raise_exception (env,RISCV_EXCP_BREAKPOINT ,0 );break ;case DBG_ACTION_DBG_MODE : +if (!env_archcpu (env)->cfg.ext_sdext) { +qemu_log_mask (LOG_GUEST_ERROR , +"trigger action=debug mode requires Sdext\n" ); +riscv_raise_exception (env,RISCV_EXCP_BREAKPOINT ,0 ); + } +riscv_cpu_enter_debug_mode (env, env->pc,DCSR_CAUSE_TRIGGER ); +/* +* If this came from the Trigger Module's CPU breakpoint/watchpoint, +* we're already returning via EXCP_DEBUG. Otherwise, stop now. +*/ +if (cs->exception_index !=EXCP_DEBUG ) { + cs->exception_index =EXCP_DEBUG ; +cpu_loop_exit_restore (cs,GETPC ()); + } +break ;case DBG_ACTION_TRACE0 :case DBG_ACTION_TRACE1 :case DBG_ACTION_TRACE2 :
@@ -441,6 +459,7 @@ static target_ulong type2_mcontrol_validate(CPURISCVState *env, {target_ulong val;uint32_t size; +uint32_t action;/* validate the generic part first */ val =tdata1_validate (env, ctrl,TRIGGER_TYPE_AD_MATCH );
@@ -448,11 +467,25 @@ static target_ulong type2_mcontrol_validate(CPURISCVState *env,/* validate unimplemented (always zero) bits */ warn_always_zero_bit (ctrl,TYPE2_MATCH ,"match" );warn_always_zero_bit (ctrl,TYPE2_CHAIN ,"chain" ); -warn_always_zero_bit (ctrl,TYPE2_ACTION ,"action" );warn_always_zero_bit (ctrl,TYPE2_TIMING ,"timing" );warn_always_zero_bit (ctrl,TYPE2_SELECT ,"select" );warn_always_zero_bit (ctrl,TYPE2_HIT ,"hit" ); + action = (ctrl &TYPE2_ACTION ) >>12 ; +if (action ==DBG_ACTION_BP ) { + val |= ctrl &TYPE2_ACTION ; + }else if (action ==DBG_ACTION_DBG_MODE ) { +if (env_archcpu (env)->cfg.ext_sdext) { + val |= ctrl &TYPE2_ACTION ; + }else { +qemu_log_mask (LOG_GUEST_ERROR , +"trigger action=debug mode requires Sdext\n" ); + } + }else { +qemu_log_mask (LOG_UNIMP ,"trigger action: %u is not supported\n" , + action); + } +/* validate size encoding */ size =type2_breakpoint_size (env, ctrl);if (access_size[size] ==-1 ) {
@@ -569,6 +602,7 @@ static target_ulong type6_mcontrol6_validate(CPURISCVState *env, {target_ulong val;uint32_t size; +uint32_t action;/* validate the generic part first */ val =tdata1_validate (env, ctrl,TRIGGER_TYPE_AD_MATCH6 );
@@ -576,11 +610,25 @@ static target_ulong type6_mcontrol6_validate(CPURISCVState *env,/* validate unimplemented (always zero) bits */ warn_always_zero_bit (ctrl,TYPE6_MATCH ,"match" );warn_always_zero_bit (ctrl,TYPE6_CHAIN ,"chain" ); -warn_always_zero_bit (ctrl,TYPE6_ACTION ,"action" );warn_always_zero_bit (ctrl,TYPE6_TIMING ,"timing" );warn_always_zero_bit (ctrl,TYPE6_SELECT ,"select" );warn_always_zero_bit (ctrl,TYPE6_HIT ,"hit" ); + action = (ctrl &TYPE6_ACTION ) >>12 ; +if (action ==DBG_ACTION_BP ) { + val |= ctrl &TYPE6_ACTION ; + }else if (action ==DBG_ACTION_DBG_MODE ) { +if (env_archcpu (env)->cfg.ext_sdext) { + val |= ctrl &TYPE6_ACTION ; + }else { +qemu_log_mask (LOG_GUEST_ERROR , +"trigger action=debug mode requires Sdext\n" ); + } + }else { +qemu_log_mask (LOG_UNIMP ,"trigger action: %u is not supported\n" , + action); + } +/* validate size encoding */ size =extract32 (ctrl,16 ,4 );if (access_size[size] ==-1 ) {
@@ -919,6 +967,7 @@ target_ulong tinfo_csr_read(CPURISCVState *env) {/* assume all triggers support the same types of triggers */ return BIT (TRIGGER_TYPE_AD_MATCH ) | +BIT (TRIGGER_TYPE_INST_CNT ) |BIT (TRIGGER_TYPE_AD_MATCH6 ); }
Signature · 1 line
2.53.0
PATCH v6 2/7 target/riscv: add sdext debug CSRs state
In reply to Chao LiuRISC-V Debug Specification:
https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
Add architectural state for Sdext Debug Mode: debug_mode, dcsr, dpc and dscratch0/1. Wire up CSR access for dcsr/dpc/dscratch and gate them to Debug Mode (or host debugger access).
The Sdext is not fully implemented, so it is disabled by default.
--- target/riscv/cpu.c | 8 ++ target/riscv/cpu.h | 4 + target/riscv/cpu_bits.h | 33 ++++++++ target/riscv/cpu_cfg_fields.h.inc | 1 + target/riscv/csr.c | 126 ++++++++++++++++++++++++++++++ target/riscv/machine.c | 20 +++++ 6 files changed, 192 insertions(+)
target/riscv/cpu.c +8 -0
@@ -210,6 +210,7 @@ const RISCVIsaExtData isa_edata_arr[] = {ISA_EXT_DATA_ENTRY (zvkt,PRIV_VERSION_1_12_0 , ext_zvkt),ISA_EXT_DATA_ENTRY (zhinx,PRIV_VERSION_1_12_0 , ext_zhinx),ISA_EXT_DATA_ENTRY (zhinxmin,PRIV_VERSION_1_12_0 , ext_zhinxmin), +ISA_EXT_DATA_ENTRY (sdext,PRIV_VERSION_1_12_0 , ext_sdext),ISA_EXT_DATA_ENTRY (sdtrig,PRIV_VERSION_1_12_0 , ext_sdtrig),ISA_EXT_DATA_ENTRY (shcounterenw,PRIV_VERSION_1_12_0 , has_priv_1_12), ISA_EXT_DATA_ENTRY(sha, PRIV_VERSION_1_12_0, ext_sha),
@@ -783,6 +784,12 @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) env->vill = true;#ifndef CONFIG_USER_ONLY + env->debug_mode = false; + env->dcsr =DCSR_DEBUGVER (4 ); + env->dpc =0 ; + env->dscratch[0 ] =0 ; + env->dscratch[1 ] =0 ; +if (cpu->cfg.ext_sdtrig) {riscv_trigger_reset_hold (env); }
@@ -1248,6 +1255,7 @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = {MULTI_EXT_CFG_BOOL ("smcdeleg" , ext_smcdeleg, false),MULTI_EXT_CFG_BOOL ("sscsrind" , ext_sscsrind, false),MULTI_EXT_CFG_BOOL ("ssccfg" , ext_ssccfg, false), +MULTI_EXT_CFG_BOOL ("sdext" , ext_sdext, false),MULTI_EXT_CFG_BOOL ("sdtrig" , ext_sdtrig, true),MULTI_EXT_CFG_BOOL ("smctr" , ext_smctr, false), MULTI_EXT_CFG_BOOL("ssctr", ext_ssctr, false),
target/riscv/cpu.h +4 -0
@@ -476,6 +476,10 @@ struct CPUArchState {/* True if in debugger mode. */ bool debugger; +bool debug_mode; +target_ulong dcsr; +target_ulong dpc; +target_ulong dscratch[2 ];uint64_t mstateen[SMSTATEEN_MAX_COUNT ];uint64_t hstateen[SMSTATEEN_MAX_COUNT ];
target/riscv/cpu_bits.h +33 -0
@@ -467,6 +467,39 @@#define CSR_DCSR 0x7b0#define CSR_DPC 0x7b1#define CSR_DSCRATCH 0x7b2 +#define CSR_DSCRATCH1 0x7b3 + +/* DCSR fields */ +#define DCSR_XDEBUGVER_SHIFT 28 +#define DCSR_XDEBUGVER_MASK (0xfu << DCSR_XDEBUGVER_SHIFT) +#define DCSR_DEBUGVER (val) ((target_ulong)(val) << DCSR_XDEBUGVER_SHIFT) +#define DCSR_EXTCAUSE_SHIFT 24 +#define DCSR_EXTCAUSE_MASK (0x7u << DCSR_EXTCAUSE_SHIFT) +#define DCSR_CETRIG BIT(19) +#define DCSR_PELP BIT(18) +#define DCSR_EBREAKVS BIT(17) +#define DCSR_EBREAKVU BIT(16) +#define DCSR_EBREAKM BIT(15) +#define DCSR_EBREAKS BIT(13) +#define DCSR_EBREAKU BIT(12) +#define DCSR_STEPIE BIT(11) +#define DCSR_STOPCOUNT BIT(10) +#define DCSR_STOPTIME BIT(9) +#define DCSR_CAUSE_SHIFT 6 +#define DCSR_CAUSE_MASK (0x7u << DCSR_CAUSE_SHIFT) +#define DCSR_V BIT(5) +#define DCSR_MPRVEN BIT(4) +#define DCSR_NMIP BIT(3) +#define DCSR_STEP BIT(2) +#define DCSR_PRV_MASK 0x3u + +#define DCSR_CAUSE_EBREAK 1 +#define DCSR_CAUSE_TRIGGER 2 +#define DCSR_CAUSE_HALTREQ 3 +#define DCSR_CAUSE_STEP 4 +#define DCSR_CAUSE_RESET 5 +#define DCSR_CAUSE_GROUP 6 +#define DCSR_CAUSE_OTHER 7/* Performance Counters */ #define CSR_MHPMCOUNTER3 0xb03
target/riscv/cpu_cfg_fields.h.inc +1 -0
@@ -46,6 +46,7 @@ BOOL_FIELD(ext_zilsd) BOOL_FIELD(ext_zimop) BOOL_FIELD(ext_zcmop) BOOL_FIELD(ext_ztso) +BOOL_FIELD(ext_sdext) BOOL_FIELD(ext_sdtrig) BOOL_FIELD(ext_smstateen) BOOL_FIELD(ext_sstc)
target/riscv/csr.c +126 -0
138 lines not on this page · raw message
target/riscv/machine.c +20 -0
@@ -248,6 +248,25 @@ static const VMStateDescription vmstate_sdtrig = {VMSTATE_UINTTL_ARRAY (env.tdata1,RISCVCPU ,RV_MAX_TRIGGERS ),VMSTATE_UINTTL_ARRAY (env.tdata2,RISCVCPU ,RV_MAX_TRIGGERS ),VMSTATE_UINTTL_ARRAY (env.tdata3,RISCVCPU ,RV_MAX_TRIGGERS ), +VMSTATE_BOOL_V (env.debug_mode,RISCVCPU ,3 ), +VMSTATE_UINTTL_V (env.dcsr,RISCVCPU ,3 ), +VMSTATE_UINTTL_V (env.dpc,RISCVCPU ,3 ), +VMSTATE_UINTTL_ARRAY_V (env.dscratch,RISCVCPU ,2 ,3 ), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_sdext = { + .name ="cpu/sdext" , + .version_id =1 , + .minimum_version_id =1 , + .needed = sdtrig_needed, + .post_load = sdtrig_post_load, + .fields = (const VMStateField []) { +VMSTATE_BOOL_V (env.debug_mode,RISCVCPU ,3 ), +VMSTATE_UINTTL_V (env.dcsr,RISCVCPU ,3 ), +VMSTATE_UINTTL_V (env.dpc,RISCVCPU ,3 ), +VMSTATE_UINTTL_ARRAY_V (env.dscratch,RISCVCPU ,2 ,3 ),VMSTATE_END_OF_LIST () } };
@@ -499,6 +518,7 @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_ctr, &vmstate_sstc, &vmstate_sdtrig, + &vmstate_sdext, NULL } };
Signature · 1 line
2.53.0
Re: [PATCH v6 1/7] target/riscv: deprecate 'debug' CPU property
In reply to Chao LiuQuoted 6 lines · Chao Liu
From: Daniel Henrique Barboza <[email protected]>
Starting on commit
f31ba686a9("target/riscv/cpu.c: add 'sdtrig' in riscv,isa') the 'debug' flag has been used as an alias for 'sdtrig'.
Quoted 7 lines
We're going to add more debug trigger extensions, e.g. 'sdext' [1]. And all of a sudden the existence of this flag is now weird. Do we keep it as a 'sdtrig' only or do we add 'sdext'?
The solution proposed here is to deprecate it. The flag was introduced a long time ago as a way to encapsulate support for all debug related CSRs. Today we have specific debug trigger extensions and there's no
The flag was originally introduced to support the original debug spec:
https://github.com/riscv/riscv-debug-spec/releases/tag/task_group_vote
There was no sdtrig back then, so debug was used.
Quoted 16 lines
more use for a generic 'debug' flag. Users should be encouraged to enable/disable extensions directly instead of using "made-up" flags that exists only in a QEMU context.
The following changes are made:
- '
ext_sdtrig' flag was added incpu->cfg. 'debug' flag was removed fromcpu->cfg;
- All occurrences ofcpu->cfg.debugwere replaced to 'ext_sdtrig';
- Two explicit getters and setters for the 'debug' property were added. The property will simply get/setext_sdtrig;
-vmstate_debugwas renamed tovmstate_sdtrig. We're aware that this will impact migration between QEMU 10.2 to newer versions, but we're still in a point where the migration break cost isn't big enough to justify adding migration compatibility scaffolding.
Quoted 2 lines
Finally,
deprecated.rstwas updated to deprecate 'debug' and encourage users to use 'ext_sdtrig' instead.
The problem (and this is always a problem with the debug spec) is there are now two ratified versions and no easy way to support both.
AFAIK most hardware supports version 0.13, although at some point (which might have already happened) that will no longer be true as everyone updates to the latest version.
Generally QEMU tries to support all ratified specs, so we are reluctant to remove 0.13. We might have to bite the bullet one day, but ideally that would happen when 1.0 is much more commonly used then 0.13.
So, the question is. Do we actually want to depreciate 0.13?
Alistair
Quoted 248 lines
[1] https://lore.kernel.org/qemu-devel/[email protected]/
Signed-off-by Daniel Henrique Barboza <[email protected]>Reviewed-by Chao Liu <[email protected]>Tested-by Tao Tang <[email protected]>--- docs/about/deprecated.rst | 7 +++++ target/riscv/cpu.c | 51 ++++++++++++++++++++++++++++--- target/riscv/cpu_cfg_fields.h.inc | 2 +- target/riscv/csr.c | 2 +- target/riscv/machine.c | 24 +++++++-------- target/riscv/tcg/tcg-cpu.c | 2 +- 6 files changed, 69 insertions(+), 19 deletions(-)docs/about/deprecated.rst +7
-0@@ -452,6 +452,13 @@ It was implemented as a no-op instruction in TCG up to QEMU 9.0, but only with ``-cpu max`` (which does not guarantee migration compatibility across versions). +``debug=true|false`` on RISC-V CPUs (since 11.0) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +This option, since QEMU 10.1, has been a simple alias to the ``sdtrig`` +extension. Users are advised to enable/disable ``sdtrig`` directly instead +of using ``debug``. + Backwards compatibility -----------------------target/riscv/cpu.c +47
-4@@ -210,7 +210,7 @@ const RISCVIsaExtData isa_edata_arr[] = {ISA_EXT_DATA_ENTRY (zvkt,PRIV_VERSION_1_12_0 , ext_zvkt),ISA_EXT_DATA_ENTRY (zhinx,PRIV_VERSION_1_12_0 , ext_zhinx),ISA_EXT_DATA_ENTRY (zhinxmin,PRIV_VERSION_1_12_0 , ext_zhinxmin), -ISA_EXT_DATA_ENTRY (sdtrig,PRIV_VERSION_1_12_0 , debug), +ISA_EXT_DATA_ENTRY (sdtrig,PRIV_VERSION_1_12_0 , ext_sdtrig),ISA_EXT_DATA_ENTRY (shcounterenw,PRIV_VERSION_1_12_0 , has_priv_1_12),ISA_EXT_DATA_ENTRY (sha,PRIV_VERSION_1_12_0 , ext_sha), ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12),@@ -783,7 +783,7 @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) env->vill = true;#ifndef CONFIG_USER_ONLY -if (cpu->cfg.debug) { +if (cpu->cfg.ext_sdtrig) {riscv_trigger_reset_hold (env); }@@ -947,7 +947,7 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)riscv_cpu_register_gdb_regs_for_features (cs);#ifndef CONFIG_USER_ONLY -if (cpu->cfg.debug) { +if (cpu->cfg.ext_sdtrig) {riscv_trigger_realize (&cpu->env); }#endif @@ -1126,6 +1126,14 @@ static void riscv_cpu_init(Object *obj) cpu->env.vext_ver =VEXT_VERSION_1_00_0 ; cpu->cfg.max_satp_mode =-1 ; +/* +* 'debug' started being deprecated in 11.0, been just a proxy +* to set ext_sdtrig ever since. It has been enabled by default +* for a long time though, so we're stuck with setting set 'strig' +* by default too. At least for now ... +*/ + cpu->cfg.ext_sdtrig = true; +if (mcc->def->profile) { mcc->def->profile->enabled = true; }@@ -1240,6 +1248,7 @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = {MULTI_EXT_CFG_BOOL ("smcdeleg" , ext_smcdeleg, false),MULTI_EXT_CFG_BOOL ("sscsrind" , ext_sscsrind, false),MULTI_EXT_CFG_BOOL ("ssccfg" , ext_ssccfg, false), +MULTI_EXT_CFG_BOOL ("sdtrig" , ext_sdtrig, true),MULTI_EXT_CFG_BOOL ("smctr" , ext_smctr, false),MULTI_EXT_CFG_BOOL ("ssctr" , ext_ssctr, false), MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true),@@ -2654,8 +2663,42 @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = {NULL }; +/* +* DEPRECATED_11.0: just a proxy for ext_sdtrig. +*/ +static void prop_debug_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +bool value =RISCV_CPU (obj)->cfg.ext_sdtrig; + +visit_type_bool (v, name, &value, errp); +} + +/* +* DEPRECATED_11.0: just a proxy for ext_sdtrig. +*/ +static void prop_debug_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +bool value; + +visit_type_bool (v, name, &value, errp); + cpu->cfg.ext_sdtrig = value; +} + +/* +* DEPRECATED_11.0: just a proxy for ext_sdtrig. +*/ +static const PropertyInfo prop_debug = { + .type ="bool" , + .description ="DEPRECATED: use 'sdtrig' instead." , + .get = prop_debug_get, + .set = prop_debug_set, +}; +static const Property riscv_cpu_properties[] = { -DEFINE_PROP_BOOL ("debug" ,RISCVCPU , cfg.debug, true), + {.name ="debug" , .info = &prop_debug}, {.name ="pmu-mask" , .info = &prop_pmu_mask}, {.name ="pmu-num" , .info = &prop_pmu_num},/* Deprecated */ target/riscv/cpu_cfg_fields.h.inc +1
-1@@ -46,6 +46,7 @@ BOOL_FIELD(ext_zilsd) BOOL_FIELD(ext_zimop) BOOL_FIELD(ext_zcmop) BOOL_FIELD(ext_ztso) +BOOL_FIELD(ext_sdtrig) BOOL_FIELD(ext_smstateen) BOOL_FIELD(ext_sstc) BOOL_FIELD(ext_smcdeleg)@@ -159,7 +160,6 @@ BOOL_FIELD(ext_xlrbr) BOOL_FIELD(mmu) BOOL_FIELD(pmp) -BOOL_FIELD(debug) BOOL_FIELD(misa_w) BOOL_FIELD(short_isa_string)target/riscv/csr.c +1
-1@@ -776,7 +776,7 @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno)static RISCVException debug (CPURISCVState *env,int csrno) { -if (riscv_cpu_cfg (env)->debug) { +if (riscv_cpu_cfg (env)->ext_sdtrig) {return RISCV_EXCP_NONE ; }target/riscv/machine.c +12
-12@@ -218,14 +218,14 @@ static const VMStateDescription vmstate_kvmtimer = { };#endif -static bool debug_needed (void *opaque) +static bool sdtrig_needed (void *opaque) {RISCVCPU *cpu = opaque; -return cpu->cfg.debug; +return cpu->cfg.ext_sdtrig; } -static int debug_post_load (void *opaque,int version_id) +static int sdtrig_post_load (void *opaque,int version_id) {RISCVCPU *cpu = opaque;CPURISCVState *env = &cpu->env;@@ -237,12 +237,12 @@ static int debug_post_load(void *opaque, int version_id)return 0 ; } -static const VMStateDescription vmstate_debug = { - .name ="cpu/debug" , - .version_id =2 , - .minimum_version_id =2 , - .needed = debug_needed, - .post_load = debug_post_load, +static const VMStateDescription vmstate_sdtrig = { + .name ="cpu/sdtrig" , + .version_id =1 , + .minimum_version_id =1 , + .needed = sdtrig_needed, + .post_load = sdtrig_post_load, .fields = (const VMStateField []) {VMSTATE_UINTTL (env.trigger_cur,RISCVCPU ),VMSTATE_UINTTL_ARRAY (env.tdata1,RISCVCPU ,RV_MAX_TRIGGERS ),@@ -425,8 +425,8 @@ static const VMStateDescription vmstate_sstc = {const VMStateDescription vmstate_riscv_cpu = { .name ="cpu" , - .version_id =11 , - .minimum_version_id =11 , + .version_id =12 , + .minimum_version_id =12 , .post_load = riscv_cpu_post_load, .fields = (const VMStateField []) {VMSTATE_UINTTL_ARRAY (env.gpr,RISCVCPU ,32 ),@@ -492,13 +492,13 @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_kvmtimer, #endif &vmstate_envcfg, - &vmstate_debug, &vmstate_smstateen, &vmstate_jvt, &vmstate_elp, &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_sdtrig,NULL } };target/riscv/tcg/tcg-cpu.c +1
-2@@ -180,7 +180,7 @@ static TCGTBCPUState riscv_get_tb_cpu_state(CPUState *cs) ? EXT_STATUS_DIRTY : EXT_STATUS_DISABLED; } -if (cpu->cfg.debug && !icount_enabled ()) { +if (cpu->cfg.ext_sdtrig && !icount_enabled ()) { flags =FIELD_DP32 (flags,TB_FLAGS ,ITRIGGER , env->itrigger_enabled); }#endif --2.53.0
Re: [PATCH v6 1/7] target/riscv: deprecate 'debug' CPU property
Quoted 46 lines · Alistair Francis
Quoted 6 lines · Chao Liu
From: Daniel Henrique Barboza <[email protected]>
Starting on commit
f31ba686a9("target/riscv/cpu.c: add 'sdtrig' in riscv,isa') the 'debug' flag has been used as an alias for 'sdtrig'.Quoted 7 lines
We're going to add more debug trigger extensions, e.g. 'sdext' [1]. And all of a sudden the existence of this flag is now weird. Do we keep it as a 'sdtrig' only or do we add 'sdext'?
The solution proposed here is to deprecate it. The flag was introduced a long time ago as a way to encapsulate support for all debug related CSRs. Today we have specific debug trigger extensions and there's no
The flag was originally introduced to support the original debug spec:
https://github.com/riscv/riscv-debug-spec/releases/tag/task_group_voteThere was no sdtrig back then, so debug was used.
Quoted 16 lines
more use for a generic 'debug' flag. Users should be encouraged to enable/disable extensions directly instead of using "made-up" flags that exists only in a QEMU context.
The following changes are made:
- '
ext_sdtrig' flag was added incpu->cfg. 'debug' flag was removed fromcpu->cfg;
- All occurrences ofcpu->cfg.debugwere replaced to 'ext_sdtrig';
- Two explicit getters and setters for the 'debug' property were added. The property will simply get/setext_sdtrig;
-vmstate_debugwas renamed tovmstate_sdtrig. We're aware that this will impact migration between QEMU 10.2 to newer versions, but we're still in a point where the migration break cost isn't big enough to justify adding migration compatibility scaffolding.Quoted 2 lines
Finally,
deprecated.rstwas updated to deprecate 'debug' and encourage users to use 'ext_sdtrig' instead.The problem (and this is always a problem with the debug spec) is there are now two ratified versions and no easy way to support both.
AFAIK most hardware supports version 0.13, although at some point (which might have already happened) that will no longer be true as everyone updates to the latest version.
Quoted 6 lines
Generally QEMU tries to support all ratified specs, so we are reluctant to remove 0.13. We might have to bite the bullet one day, but ideally that would happen when 1.0 is much more commonly used then 0.13.
So, the question is. Do we actually want to depreciate 0.13?
RVA23 is compliant with debug 1.0 only, as so other specifications we want to support (like RV Server Platform). Distros are already moving on to RVA23, and by definition away from debug 0.13 (if they even supported it in the first place - not sure). So I think it's highly unlikely that we'll have someone that cares enough for 0.13 to the point of complaining about this deprecation, let alone helping us keeping 0.13 alive with 1.0.
And our deprecation process takes time. At the earliest, if we move on with the deprecation now, we need to keep supporting this 'debug' flag until August 2027, and then remove it in December 2027. There's lots of time for interested parties to chime in and maybe convince us to not deprecate it. Which again, I think it's unlikely.
I believe we should go ahead and deprecate it right now. Thanks,
Daniel
Quoted 251 lines
Alistair
Quoted 248 lines
[1] https://lore.kernel.org/qemu-devel/[email protected]/
Signed-off-by Daniel Henrique Barboza <[email protected]>Reviewed-by Chao Liu <[email protected]>Tested-by Tao Tang <[email protected]>--- docs/about/deprecated.rst | 7 +++++ target/riscv/cpu.c | 51 ++++++++++++++++++++++++++++--- target/riscv/cpu_cfg_fields.h.inc | 2 +- target/riscv/csr.c | 2 +- target/riscv/machine.c | 24 +++++++-------- target/riscv/tcg/tcg-cpu.c | 2 +- 6 files changed, 69 insertions(+), 19 deletions(-)docs/about/deprecated.rst +7
-0@@ -452,6 +452,13 @@ It was implemented as a no-op instruction in TCG up to QEMU 9.0, but only with ``-cpu max`` (which does not guarantee migration compatibility across versions). +``debug=true|false`` on RISC-V CPUs (since 11.0) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +This option, since QEMU 10.1, has been a simple alias to the ``sdtrig`` +extension. Users are advised to enable/disable ``sdtrig`` directly instead +of using ``debug``. + Backwards compatibility -----------------------target/riscv/cpu.c +47
-4@@ -210,7 +210,7 @@ const RISCVIsaExtData isa_edata_arr[] = {ISA_EXT_DATA_ENTRY (zvkt,PRIV_VERSION_1_12_0 , ext_zvkt),ISA_EXT_DATA_ENTRY (zhinx,PRIV_VERSION_1_12_0 , ext_zhinx),ISA_EXT_DATA_ENTRY (zhinxmin,PRIV_VERSION_1_12_0 , ext_zhinxmin), -ISA_EXT_DATA_ENTRY (sdtrig,PRIV_VERSION_1_12_0 , debug), +ISA_EXT_DATA_ENTRY (sdtrig,PRIV_VERSION_1_12_0 , ext_sdtrig),ISA_EXT_DATA_ENTRY (shcounterenw,PRIV_VERSION_1_12_0 , has_priv_1_12),ISA_EXT_DATA_ENTRY (sha,PRIV_VERSION_1_12_0 , ext_sha), ISA_EXT_DATA_ENTRY(shgatpa, PRIV_VERSION_1_12_0, has_priv_1_12),@@ -783,7 +783,7 @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) env->vill = true;#ifndef CONFIG_USER_ONLY -if (cpu->cfg.debug) { +if (cpu->cfg.ext_sdtrig) {riscv_trigger_reset_hold (env); }@@ -947,7 +947,7 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)riscv_cpu_register_gdb_regs_for_features (cs);#ifndef CONFIG_USER_ONLY -if (cpu->cfg.debug) { +if (cpu->cfg.ext_sdtrig) {riscv_trigger_realize (&cpu->env); }#endif @@ -1126,6 +1126,14 @@ static void riscv_cpu_init(Object *obj) cpu->env.vext_ver =VEXT_VERSION_1_00_0 ; cpu->cfg.max_satp_mode =-1 ; +/* +* 'debug' started being deprecated in 11.0, been just a proxy +* to set ext_sdtrig ever since. It has been enabled by default +* for a long time though, so we're stuck with setting set 'strig' +* by default too. At least for now ... +*/ + cpu->cfg.ext_sdtrig = true; +if (mcc->def->profile) { mcc->def->profile->enabled = true; }@@ -1240,6 +1248,7 @@ const RISCVCPUMultiExtConfig riscv_cpu_extensions[] = {MULTI_EXT_CFG_BOOL ("smcdeleg" , ext_smcdeleg, false),MULTI_EXT_CFG_BOOL ("sscsrind" , ext_sscsrind, false),MULTI_EXT_CFG_BOOL ("ssccfg" , ext_ssccfg, false), +MULTI_EXT_CFG_BOOL ("sdtrig" , ext_sdtrig, true),MULTI_EXT_CFG_BOOL ("smctr" , ext_smctr, false),MULTI_EXT_CFG_BOOL ("ssctr" , ext_ssctr, false), MULTI_EXT_CFG_BOOL("zifencei", ext_zifencei, true),@@ -2654,8 +2663,42 @@ RISCVCPUImpliedExtsRule *riscv_multi_ext_implied_rules[] = {NULL }; +/* +* DEPRECATED_11.0: just a proxy for ext_sdtrig. +*/ +static void prop_debug_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +bool value =RISCV_CPU (obj)->cfg.ext_sdtrig; + +visit_type_bool (v, name, &value, errp); +} + +/* +* DEPRECATED_11.0: just a proxy for ext_sdtrig. +*/ +static void prop_debug_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +bool value; + +visit_type_bool (v, name, &value, errp); + cpu->cfg.ext_sdtrig = value; +} + +/* +* DEPRECATED_11.0: just a proxy for ext_sdtrig. +*/ +static const PropertyInfo prop_debug = { + .type ="bool" , + .description ="DEPRECATED: use 'sdtrig' instead." , + .get = prop_debug_get, + .set = prop_debug_set, +}; +static const Property riscv_cpu_properties[] = { -DEFINE_PROP_BOOL ("debug" ,RISCVCPU , cfg.debug, true), + {.name ="debug" , .info = &prop_debug}, {.name ="pmu-mask" , .info = &prop_pmu_mask}, {.name ="pmu-num" , .info = &prop_pmu_num},/* Deprecated */ target/riscv/cpu_cfg_fields.h.inc +1
-1@@ -46,6 +46,7 @@ BOOL_FIELD(ext_zilsd) BOOL_FIELD(ext_zimop) BOOL_FIELD(ext_zcmop) BOOL_FIELD(ext_ztso) +BOOL_FIELD(ext_sdtrig) BOOL_FIELD(ext_smstateen) BOOL_FIELD(ext_sstc) BOOL_FIELD(ext_smcdeleg)@@ -159,7 +160,6 @@ BOOL_FIELD(ext_xlrbr) BOOL_FIELD(mmu) BOOL_FIELD(pmp) -BOOL_FIELD(debug) BOOL_FIELD(misa_w) BOOL_FIELD(short_isa_string)target/riscv/csr.c +1
-1@@ -776,7 +776,7 @@ static RISCVException have_mseccfg(CPURISCVState *env, int csrno)static RISCVException debug (CPURISCVState *env,int csrno) { -if (riscv_cpu_cfg (env)->debug) { +if (riscv_cpu_cfg (env)->ext_sdtrig) {return RISCV_EXCP_NONE ; }target/riscv/machine.c +12
-12@@ -218,14 +218,14 @@ static const VMStateDescription vmstate_kvmtimer = { };#endif -static bool debug_needed (void *opaque) +static bool sdtrig_needed (void *opaque) {RISCVCPU *cpu = opaque; -return cpu->cfg.debug; +return cpu->cfg.ext_sdtrig; } -static int debug_post_load (void *opaque,int version_id) +static int sdtrig_post_load (void *opaque,int version_id) {RISCVCPU *cpu = opaque;CPURISCVState *env = &cpu->env;@@ -237,12 +237,12 @@ static int debug_post_load(void *opaque, int version_id)return 0 ; } -static const VMStateDescription vmstate_debug = { - .name ="cpu/debug" , - .version_id =2 , - .minimum_version_id =2 , - .needed = debug_needed, - .post_load = debug_post_load, +static const VMStateDescription vmstate_sdtrig = { + .name ="cpu/sdtrig" , + .version_id =1 , + .minimum_version_id =1 , + .needed = sdtrig_needed, + .post_load = sdtrig_post_load, .fields = (const VMStateField []) {VMSTATE_UINTTL (env.trigger_cur,RISCVCPU ),VMSTATE_UINTTL_ARRAY (env.tdata1,RISCVCPU ,RV_MAX_TRIGGERS ),@@ -425,8 +425,8 @@ static const VMStateDescription vmstate_sstc = {const VMStateDescription vmstate_riscv_cpu = { .name ="cpu" , - .version_id =11 , - .minimum_version_id =11 , + .version_id =12 , + .minimum_version_id =12 , .post_load = riscv_cpu_post_load, .fields = (const VMStateField []) {VMSTATE_UINTTL_ARRAY (env.gpr,RISCVCPU ,32 ),@@ -492,13 +492,13 @@ const VMStateDescription vmstate_riscv_cpu = { &vmstate_kvmtimer, #endif &vmstate_envcfg, - &vmstate_debug, &vmstate_smstateen, &vmstate_jvt, &vmstate_elp, &vmstate_ssp, &vmstate_ctr, &vmstate_sstc, + &vmstate_sdtrig,NULL } };target/riscv/tcg/tcg-cpu.c +1
-2@@ -180,7 +180,7 @@ static TCGTBCPUState riscv_get_tb_cpu_state(CPUState *cs) ? EXT_STATUS_DIRTY : EXT_STATUS_DISABLED; } -if (cpu->cfg.debug && !icount_enabled ()) { +if (cpu->cfg.ext_sdtrig && !icount_enabled ()) { flags =FIELD_DP32 (flags,TB_FLAGS ,ITRIGGER , env->itrigger_enabled); }#endif --2.53.0
Hi Chao!
Can you please re-send this series? We did changes in the last PR that will conflict with what you did - most likely a trivial conflict in patch 2.
I'll resend patch 1 myself. Feel free to pick the rebased version to include in your v7.
Cheers,
Daniel
Quoted 115 lines
Hi,
This v6 series is rebased on Alistair's riscv-to-apply.next branch [1].
The implementation follows RISC-V Debug Specification 1.0 [2].
It introduces the sdext/sdtrig config bits, DCSR/DPC/DSCRATCH state, Debug Mode enter/leave helpers, DRET, EBREAK entry, single-step, and trigger action=debug mode.
To reduce review load, this series focuses on the Sdext features first. The Debug Module (DM) and related flows will follow in a later series.
Changes in v6:
- Rebased onto latest riscv-to-apply.nextChanges in v5:
- Patch 2: removed redundantcpu->cfg.ext_sdext = false;inriscv_cpu_init()since it's already set to false inMULTI_EXT_CFG_BOOL. (Daniel)
- Patch 7: changedLOG_UNIMPtoLOG_GUEST_ERRORfor invalid trigger action=debug mode when Sdext is not enabled.LOG_UNIMPis reserved for unimplemented features, whileLOG_GUEST_ERRORis for invalid guest actions. (Daniel)Changes in v4:
- Fixed linux-user build errors: moved debug_mode/dcsr/dpc/dscratch fields inside #ifndefCONFIG_USER_ONLYblock incpu.h, and wrapped all code using these fields with proper guards. (Daniel)
- Updated dependency from single patch (patch 5 only) to patches 1-5 of Max Chou's "Add Zvfbfa extension support" v2 series to avoid compilation errors.Changes in v3:
- Rebase onto Alistair's riscv-to-apply.next branch.
- Depend on Max Chou's patch "target/riscv: Use thetb->cs_bqseas the extend tb flags." (not included; apply it first) [3].
- Patch 2: default sdext to false inriscv_cpu_extensions.Changes in v2:
- Drop the RHCT expected AML update from this series.
- Replace the split sdext/sdtrig config bits patch with deprecating the 'debug' CPU property.
- Rebase and update patch subjects to target/riscv prefix.Changes in v1:
- Debug Mode entry/exit updates DCSR/DPC and restores execution via DRET.
- EBREAK honors DCSR ebreak bits and enters Debug Mode when enabled.
- Single-step uses DCSR.STEP with a TB flag and a helper at TB exit. It references Max Chou's patch "target/riscv: Use thetb->cs_bqseas the extend tb flags." [3].
- Sdtrig supports action=debug mode for mcontrol/mcontrol6 and reports inst-count triggers in tinfo.---
Differences vs Debug Spec (known gaps):
- No Debug Module (no DMI, dmcontrol/dmstatus, haltreq/resumereq).
- No debug ROM, program buffer, abstract commands, or SBA.
- Resume is modeled by leaving Debug Mode atcpu_exec_enter.
- Step/exception ordering is simplified: if the stepped instruction traps, the normal exception is taken and Debug Mode is not forced.
- Several DCSR fields are not fully modeled (stopcount/stoptime, etc).Roadmap (next stage, DM focus):
1) Add a DM core with DMI access and hart state tracking.
2) Implement halt/resume handshake and move Debug Mode transitions under DM control.
3) Add debug ROM, program buffer, and abstract commands for GPR/CSR and memory access.
4) Add SBA if required by tooling.
5) Tighten ordering rules for step/exception/trigger priorities.CI (all jobs passed except check-patch which flags pre-existing upstream style issues, not related to this series) [4].
References:
[1] https://github.com/alistair23/qemu/tree/riscv-to-apply.next
[2] https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
[3] https://lore.kernel.org/qemu-devel/[email protected]/
[4] https://gitlab.com/TaoTang/qemu/-/pipelines/2446308835Thanks,
ChaoChao Liu (6):
target/riscv: add sdext debug CSRs state target/riscv: add sdext Debug Mode helpers target/riscv: add dret instruction target/riscv: add sdext enter Debug Mode on ebreak target/riscv: add sdext single-step support target/riscv: add sdtrig trigger action=debug modeDaniel Henrique Barboza (1):
target/riscv: deprecate 'debug' CPU propertydocs/about/deprecated.rst | 7 + include/exec/translation-block.h | 4 +- target/riscv/cpu.c | 59 +++++++- target/riscv/cpu.h | 9 ++ target/riscv/cpu_bits.h | 33 +++++ target/riscv/cpu_cfg_fields.h.inc | 3 +- target/riscv/cpu_helper.c | 90 ++++++++++++ target/riscv/csr.c | 128 +++++++++++++++++- target/riscv/debug.c | 58 +++++++- target/riscv/helper.h | 3 + target/riscv/insn32.decode | 1 + .../riscv/insn_trans/trans_privileged.c.inc | 24 ++++ target/riscv/machine.c | 44 ++++-- target/riscv/op_helper.c | 70 ++++++++++ target/riscv/tcg/tcg-cpu.c | 21 ++- target/riscv/translate.c | 15 +- 16 files changed, 544 insertions(+), 25 deletions(-)
Quoted 9 lines · Daniel Henrique Barboza
Hi Chao!
Can you please re-send this series? We did changes in the last PR that will conflict with what you did - most likely a trivial conflict in patch 2.
I'll resend patch 1 myself. Feel free to pick the rebased version to include in your v7.
Sure, I’ll resend the v7 patches after you resend patch 1.
Thanks,
Chao
Quoted 124 lines
Cheers,
DanielQuoted 115 lines
Hi,
This v6 series is rebased on Alistair's riscv-to-apply.next branch [1].
The implementation follows RISC-V Debug Specification 1.0 [2].
It introduces the sdext/sdtrig config bits, DCSR/DPC/DSCRATCH state, Debug Mode enter/leave helpers, DRET, EBREAK entry, single-step, and trigger action=debug mode.
To reduce review load, this series focuses on the Sdext features first. The Debug Module (DM) and related flows will follow in a later series.
Changes in v6:
- Rebased onto latest riscv-to-apply.nextChanges in v5:
- Patch 2: removed redundantcpu->cfg.ext_sdext = false;inriscv_cpu_init()since it's already set to false inMULTI_EXT_CFG_BOOL. (Daniel)
- Patch 7: changedLOG_UNIMPtoLOG_GUEST_ERRORfor invalid trigger action=debug mode when Sdext is not enabled.LOG_UNIMPis reserved for unimplemented features, whileLOG_GUEST_ERRORis for invalid guest actions. (Daniel)Changes in v4:
- Fixed linux-user build errors: moved debug_mode/dcsr/dpc/dscratch fields inside #ifndefCONFIG_USER_ONLYblock incpu.h, and wrapped all code using these fields with proper guards. (Daniel)
- Updated dependency from single patch (patch 5 only) to patches 1-5 of Max Chou's "Add Zvfbfa extension support" v2 series to avoid compilation errors.Changes in v3:
- Rebase onto Alistair's riscv-to-apply.next branch.
- Depend on Max Chou's patch "target/riscv: Use thetb->cs_bqseas the extend tb flags." (not included; apply it first) [3].
- Patch 2: default sdext to false inriscv_cpu_extensions.Changes in v2:
- Drop the RHCT expected AML update from this series.
- Replace the split sdext/sdtrig config bits patch with deprecating the 'debug' CPU property.
- Rebase and update patch subjects to target/riscv prefix.Changes in v1:
- Debug Mode entry/exit updates DCSR/DPC and restores execution via DRET.
- EBREAK honors DCSR ebreak bits and enters Debug Mode when enabled.
- Single-step uses DCSR.STEP with a TB flag and a helper at TB exit. It references Max Chou's patch "target/riscv: Use thetb->cs_bqseas the extend tb flags." [3].
- Sdtrig supports action=debug mode for mcontrol/mcontrol6 and reports inst-count triggers in tinfo.---
Differences vs Debug Spec (known gaps):
- No Debug Module (no DMI, dmcontrol/dmstatus, haltreq/resumereq).
- No debug ROM, program buffer, abstract commands, or SBA.
- Resume is modeled by leaving Debug Mode atcpu_exec_enter.
- Step/exception ordering is simplified: if the stepped instruction traps, the normal exception is taken and Debug Mode is not forced.
- Several DCSR fields are not fully modeled (stopcount/stoptime, etc).Roadmap (next stage, DM focus):
1) Add a DM core with DMI access and hart state tracking.
2) Implement halt/resume handshake and move Debug Mode transitions under DM control.
3) Add debug ROM, program buffer, and abstract commands for GPR/CSR and memory access.
4) Add SBA if required by tooling.
5) Tighten ordering rules for step/exception/trigger priorities.CI (all jobs passed except check-patch which flags pre-existing upstream style issues, not related to this series) [4].
References:
[1] https://github.com/alistair23/qemu/tree/riscv-to-apply.next
[2] https://github.com/riscv/riscv-debug-spec/releases/tag/1.0
[3] https://lore.kernel.org/qemu-devel/[email protected]/
[4] https://gitlab.com/TaoTang/qemu/-/pipelines/2446308835Thanks,
ChaoChao Liu (6):
target/riscv: add sdext debug CSRs state target/riscv: add sdext Debug Mode helpers target/riscv: add dret instruction target/riscv: add sdext enter Debug Mode on ebreak target/riscv: add sdext single-step support target/riscv: add sdtrig trigger action=debug modeDaniel Henrique Barboza (1):
target/riscv: deprecate 'debug' CPU propertydocs/about/deprecated.rst | 7 + include/exec/translation-block.h | 4 +- target/riscv/cpu.c | 59 +++++++- target/riscv/cpu.h | 9 ++ target/riscv/cpu_bits.h | 33 +++++ target/riscv/cpu_cfg_fields.h.inc | 3 +- target/riscv/cpu_helper.c | 90 ++++++++++++ target/riscv/csr.c | 128 +++++++++++++++++- target/riscv/debug.c | 58 +++++++- target/riscv/helper.h | 3 + target/riscv/insn32.decode | 1 + .../riscv/insn_trans/trans_privileged.c.inc | 24 ++++ target/riscv/machine.c | 44 ++++-- target/riscv/op_helper.c | 70 ++++++++++ target/riscv/tcg/tcg-cpu.c | 21 ++- target/riscv/translate.c | 15 +- 16 files changed, 544 insertions(+), 25 deletions(-)