Skip to contentSkip to conversation

selftests/mm: fix failures and robustness improvements

PATCH In review Sayali Patil 2 participants 17 messages May 21

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

v7 cover selftests/mm: fix failures and robustness improvements

Hi all,

Powerpc systems with a 64K base page size exposed several issues while running mm selftests. Some tests assume specific hugetlb configurations, use incorrect interfaces, or fail instead of skipping when the required kernel features are not available.

This series fixes these issues and improves test robustness.

Please review the patches and provide any feedback or suggestions for improvement.

Thanks,
Sayali

---
v6->v7
- Rebased onto the latest mm-new branch, top commit of the base is commit 0cec77cfd531 ("mm/filemap: fix page_cache_prev_miss() when no hole is found")
- Dropped "selftest/mm: align memory size to huge page size in hugepage-mremap test":
Similar patch has already been merged.
- For "selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero":
Changed format specifier of bytes to %zu as per review
comment.
- For "selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category":
Added condition to avoid executing the test pipeline for skipped tests and assign ret directly.

v6: https://lore.kernel.org/all/[email protected]/
---
v5->v6
- For "selftests/mm: restore default nr_hugepages value via exit trap in charge_reserved_hugetlb.sh":
Extended trap to include INT and TERM in hugetlb tests to ensure nr_hugepages is restored on signal-based exits.
- For "selftests/mm: restore default nr_hugepages value via exit trap in hugetlb_reparenting_test.sh":
Extended trap to include INT and TERM in hugetlb tests to ensure nr_hugepages is restored on signal-based exits.
- For "selftests/mm: fix cgroup task placement and drop memory.current checks in hugetlb_reparenting_test.sh":
Updated the subshell invocation to pass variables as positional arguments instead of interpolating them into the command string as per review comment.
- For "selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category":
Updated the condition to avoid unconditional module removal and ensures it is only unloaded if loaded by the test.

v5: https://lore.kernel.org/all/[email protected]/
---
---
v4->v5
- For "selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category":
Renamed LOADED_MOD to LOADED_HWPOISON_INJECT_MOD as per review comment.
- Dropped "selftests/cgroup: extend test_hugetlb_memcg.c to support all huge page sizes":
Due to intermittent failures observed on some systems.
- Added Tested-by from Venkat for all patches.
- Added Reviewed-by from Zi yan for patches 7,8 and 13.
- Added Acked-by from Zi yan for patches 1 and 3.

v4: https://lore.kernel.org/all/[email protected]/
---
v3->v4

- selftests/mm: restore default nr_hugepages value via EXIT trap in charge_reserved_hugetlb.sh:
Updated to use an EXIT trap to restore the original nr_hugepages once at script termination, ensuring reliable restoration on all exit paths.

- selftest/mm: fix cgroup task placement and drop memory.current checks in hugetlb_reparenting_test.sh:
Updated to use a deterministic synchronization method by migrating the workload process within a wrapper subshell before calling exec() to ensure correct cgroup accounting.

- selftest/mm: align memory size to huge page size in hugepage-mremap test:
Update test code directly to align memory allocations to the hugepage size, rather than modifying run_vmtests.sh. This replaces the previous commit “adjust hugepage-mremap test size for large huge pages” with a cleaner, direct approach in the test itself.

- selftests/mm: ensure destination is hugetlb-backed in hugepage-mremap:
Updated to remove MAP_POPULATE flag for the mmap call as per review comment.

- selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported:
Updated as per review comment to initialize features to zero and exit on all uffd_get_features() failures, avoiding spurious test errors.

- selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category:
Declared LOADED_MOD as local variable and avoided a redundant skip message when the module is not found.
Updated logic to set exitcode to ksft_skip only when no failure has been recorded.

- selftests/cgroup: extend test_hugetlb_memcg.c to support all huge page sizes:
Updated to skip on memory constraints instead of returning EXIT_FAILURE.
Updated the logic to fully account for the scenario when the per-CPU stock is empty and a refill charges MEMCG_CHARGE_BATCH. Updated to avoid overflow on 32-bit systems for memory.max value.

- Included "selftests/mm: restore default nr_hugepages value via EXIT trap in hugetlb_reparenting_test.sh"

- Included "selftests/mm: free dynamically allocated PMD-sized buffers in split_huge_page_test"

- Included "selftests/mm: clarify alternate unmapping in compaction_test"

- Dropped "selftests/mm: fix double increment in linked list cleanup in compaction_test":
The behaviour is intentional.

v3: https://lore.kernel.org/all/[email protected]/

---
v2->v3
- selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported:
Rename function to check_uffd_wp_feature_supported() as suggested in review.
- selftest/mm: fix cgroup task placement and drop memory.current checks in hugetlb_reparenting_test.sh:
Drop memory.current validation from the hugetlb reparenting test. Keep tolerance at 7MB (reverting earlier increase to 8MB in v1).
- Included "selftests/mm: allow PUD-level entries in compound testcase of hmm tests" patch:
Extend the compound testcase checks to accept PUD-level mappings.
- Included "selftests/mm: replace hardcoded THP size with runtime PMD page size in hmm tests" patch:
Use read_pmd_pagesize() instead of TWOMEG and cap maximum THPs in benchmarks to avoid integer overflow.

v2: https://lore.kernel.org/all/[email protected]/

---
v1->v2
- For "selftests/mm: ensure destination is hugetlb-backed in hugepage-mremap":
update FLAGS definition to MAP_HUGETLB | MAP_SHARED | MAP_POPULATE and used it for mmap() calls as suggested during review.

v1: https://lore.kernel.org/all/[email protected]/
---

Sayali Patil (13):
selftests/mm: restore default nr_hugepages value via exit trap in
charge_reserved_hugetlb.sh
selftests/mm: fix hugetlb pathname construction in
charge_reserved_hugetlb.sh
selftests/mm: restore default nr_hugepages value via exit trap in
hugetlb_reparenting_test.sh
selftests/mm: fix hugetlb pathname construction in
hugetlb_reparenting_test.sh
selftests/mm: fix cgroup task placement and drop memory.current checks
in hugetlb_reparenting_test.sh
selftests/mm: size tmpfs according to PMD page size in
split_huge_page_test
selftests/mm: free dynamically allocated PMD-sized buffers in
split_huge_page_test
selftest/mm: register existing mapping with userfaultfd in
hugetlb-mremap
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero selftests/mm: move hwpoison setup into run_test() and silence modprobe
output for memory-failure category
selftests/mm: clarify alternate unmapping in compaction_test

 .../selftests/mm/charge_reserved_hugetlb.sh   | 45 +++++++++-----
 tools/testing/selftests/mm/compaction_test.c  |  3 +
 tools/testing/selftests/mm/hugetlb-mremap.c   | 32 +++-------
 .../selftests/mm/hugetlb_reparenting_test.sh  | 60 +++++++++---------
 tools/testing/selftests/mm/run_vmtests.sh     | 62 ++++++++++++-------
 .../selftests/mm/split_huge_page_test.c       | 27 +++++---
 tools/testing/selftests/mm/uffd-stress.c      |  6 +-
 tools/testing/selftests/mm/uffd-wp-mremap.c   | 13 ++++
 8 files changed, 151 insertions(+), 97 deletions(-)
Signature · 1 line
2.52.0
#2 lore raw

PATCH v7 2/13 selftests/mm: fix hugetlb pathname construction in charge_reserved_hugetlb.sh

The charge_reserved_hugetlb.sh script assumes hugetlb cgroup memory interface file names use the "<size>MB" format
(e.g. hugetlb.1024MB.current).
This assumption breaks on systems with larger huge pages such as 1GB, where the kernel exposes normalized units:

    hugetlb.1GB.current
    hugetlb.1GB.max
    hugetlb.1GB.rsvd.max
    ...

As a result, the script attempts to access files like hugetlb.1024MB.current, which do not exist when the kernel reports the size in GB.

Normalize the huge page size and construct the pathname using the appropriate unit (MB or GB), matching the hugetlb controller naming.

Fixes 209376ed2a84 ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Fixes 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
---
 .../selftests/mm/charge_reserved_hugetlb.sh   | 42 +++++++++++++------
 1 file changed, 29 insertions(+), 13 deletions(-)
tools/testing/selftests/mm/charge_reserved_hugetlb.sh +29 -13
index e1945901fd20..a1cfd3a349db 100755
@@ -94,6 +94,15 @@ function get_machine_hugepage_size() {
 }
 
 MB=$(get_machine_hugepage_size)
+if (( MB >= 1024 )); then
+        # For 1GB hugepages
+        UNIT="GB"
+        MB_DISPLAY=$((MB / 1024))
+else
+        # For 2MB hugepages
+        UNIT="MB"
+        MB_DISPLAY=$MB
+fi
 
 function setup_cgroup() {
   local name="$1"
@@ -103,11 +112,12 @@ function setup_cgroup() {
   mkdir $cgroup_path/$name
 
   echo writing cgroup limit: "$cgroup_limit"
-  echo "$cgroup_limit" >$cgroup_path/$name/hugetlb.${MB}MB.$fault_limit_file
+  echo "$cgroup_limit" > \
+	  $cgroup_path/$name/hugetlb.${MB_DISPLAY}${UNIT}.$fault_limit_file
 
   echo writing reservation limit: "$reservation_limit"
   echo "$reservation_limit" > \
-    $cgroup_path/$name/hugetlb.${MB}MB.$reservation_limit_file
+    $cgroup_path/$name/hugetlb.${MB_DISPLAY}${UNIT}.$reservation_limit_file
 
   if [ -e "$cgroup_path/$name/cpuset.cpus" ]; then
     echo 0 >$cgroup_path/$name/cpuset.cpus
@@ -142,7 +152,7 @@ function wait_for_file_value() {
 
 function wait_for_hugetlb_memory_to_get_depleted() {
   local cgroup="$1"
-  local path="$cgroup_path/$cgroup/hugetlb.${MB}MB.$reservation_usage_file"
+  local path="$cgroup_path/$cgroup/hugetlb.${MB_DISPLAY}${UNIT}.$reservation_usage_file"
 
   wait_for_file_value "$path" "0"
 }
@@ -150,7 +160,7 @@ function wait_for_hugetlb_memory_to_get_depleted() {
 function wait_for_hugetlb_memory_to_get_reserved() {
   local cgroup="$1"
   local size="$2"
-  local path="$cgroup_path/$cgroup/hugetlb.${MB}MB.$reservation_usage_file"
+  local path="$cgroup_path/$cgroup/hugetlb.${MB_DISPLAY}${UNIT}.$reservation_usage_file"
 
   wait_for_file_value "$path" "$size"
 }
@@ -158,7 +168,7 @@ function wait_for_hugetlb_memory_to_get_reserved() {
 function wait_for_hugetlb_memory_to_get_written() {
   local cgroup="$1"
   local size="$2"
-  local path="$cgroup_path/$cgroup/hugetlb.${MB}MB.$fault_usage_file"
+  local path="$cgroup_path/$cgroup/hugetlb.${MB_DISPLAY}${UNIT}.$fault_usage_file"
 
   wait_for_file_value "$path" "$size"
 }
@@ -180,8 +190,8 @@ function write_hugetlbfs_and_get_usage() {
   hugetlb_difference=0
   reserved_difference=0
 
-  local hugetlb_usage=$cgroup_path/$cgroup/hugetlb.${MB}MB.$fault_usage_file
-  local reserved_usage=$cgroup_path/$cgroup/hugetlb.${MB}MB.$reservation_usage_file
+  local hugetlb_usage=$cgroup_path/$cgroup/hugetlb.${MB_DISPLAY}${UNIT}.$fault_usage_file
+  local reserved_usage=$cgroup_path/$cgroup/hugetlb.${MB_DISPLAY}${UNIT}.$reservation_usage_file
 
   local hugetlb_before=$(cat $hugetlb_usage)
   local reserved_before=$(cat $reserved_usage)
@@ -312,8 +322,10 @@ function run_test() {
 
   cleanup_hugetlb_memory "hugetlb_cgroup_test"
 
-  local final_hugetlb=$(cat $cgroup_path/hugetlb_cgroup_test/hugetlb.${MB}MB.$fault_usage_file)
-  local final_reservation=$(cat $cgroup_path/hugetlb_cgroup_test/hugetlb.${MB}MB.$reservation_usage_file)
+  local final_hugetlb=$(cat \
+	 $cgroup_path/hugetlb_cgroup_test/hugetlb.${MB_DISPLAY}${UNIT}.$fault_usage_file)
+  local final_reservation=$(cat \
+	  $cgroup_path/hugetlb_cgroup_test/hugetlb.${MB_DISPLAY}${UNIT}.$reservation_usage_file)
 
   echo $hugetlb_difference
   echo $reserved_difference
@@ -369,10 +381,14 @@ function run_multiple_cgroup_test() {
   reservation_failed1=$reservation_failed
   oom_killed1=$oom_killed
 
-  local cgroup1_hugetlb_usage=$cgroup_path/hugetlb_cgroup_test1/hugetlb.${MB}MB.$fault_usage_file
-  local cgroup1_reservation_usage=$cgroup_path/hugetlb_cgroup_test1/hugetlb.${MB}MB.$reservation_usage_file
-  local cgroup2_hugetlb_usage=$cgroup_path/hugetlb_cgroup_test2/hugetlb.${MB}MB.$fault_usage_file
-  local cgroup2_reservation_usage=$cgroup_path/hugetlb_cgroup_test2/hugetlb.${MB}MB.$reservation_usage_file
+  local cgroup1_hugetlb_usage=\
+	  $cgroup_path/hugetlb_cgroup_test1/hugetlb.${MB_DISPLAY}${UNIT}.$fault_usage_file
+  local cgroup1_reservation_usage=\
+	  $cgroup_path/hugetlb_cgroup_test1/hugetlb.${MB_DISPLAY}${UNIT}.$reservation_usage_file
+  local cgroup2_hugetlb_usage=\
+	  $cgroup_path/hugetlb_cgroup_test2/hugetlb.${MB_DISPLAY}${UNIT}.$fault_usage_file
+  local cgroup2_reservation_usage=\
+	  $cgroup_path/hugetlb_cgroup_test2/hugetlb.${MB_DISPLAY}${UNIT}.$reservation_usage_file
 
   local usage_before_second_write=$(cat $cgroup1_hugetlb_usage)
   local reservation_usage_before_second_write=$(cat $cgroup1_reservation_usage)
Signature · 1 line
2.52.0
#1 lore raw

PATCH v7 1/13 selftests/mm: restore default nr_hugepages value via exit trap in charge_reserved_hugetlb.sh

In reply to Sayali Patil

cleanup() resets nr_hugepages to 0 on every invocation, while the test reconfigures it again in the next iteration. This leads to repeated allocation and freeing of large numbers of hugepages, especially when the original value is high.

Additionally, with set -e, failures in earlier cleanup steps (e.g., rmdir or umount returning EBUSY while background activity is still ongoing) can cause the script to exit before restoring the original value, leaving the system in a modified state.

Introduce a trap on EXIT, INT, and TERM to restore the original nr_hugepages value once at script termination. This avoids unnecessary allocation churn and ensures the original value is reliably restored on all exit paths.

Fixes 7d695b1c3695b ("selftests/mm: save and restore nr_hugepages value")
---
 tools/testing/selftests/mm/charge_reserved_hugetlb.sh | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
tools/testing/selftests/mm/charge_reserved_hugetlb.sh +1 -2
index 44f4e703deb9..e1945901fd20 100755
@@ -17,6 +17,7 @@ if ! command -v killall >/dev/null 2>&1; then
 fi
 
 nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
+trap 'echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages' EXIT INT TERM
 
 fault_limit_file=limit_in_bytes
 reservation_limit_file=rsvd.limit_in_bytes
@@ -70,7 +71,6 @@ function cleanup() {
   if [[ -e $cgroup_path/hugetlb_cgroup_test2 ]]; then
     rmdir $cgroup_path/hugetlb_cgroup_test2
   fi
-  echo 0 >/proc/sys/vm/nr_hugepages
   echo CLEANUP DONE
 }
 
@@ -599,4 +599,3 @@ if [[ $do_umount ]]; then
   rmdir $cgroup_path
 fi
 
-echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
Signature · 1 line
2.52.0
#3 lore raw

PATCH v7 3/13 selftests/mm: restore default nr_hugepages value via exit trap in hugetlb_reparenting_test.sh

In reply to Sayali Patil

The test modifies nr_hugepages during execution and restores it from cleanup() and again reconfigure it setup, which is invoked multiple times across test flow. This can lead to repeated allocation/freeing of hugepages.

With set -e, failures in cleanup (e.g., rmdir/umount) can also cause early exit before restoring the original value at the end.

Move restoration of the original nr_hugepages value to a trap handler registered for EXIT, INT, and TERM signals so it is always restored on all exit paths. This also avoids unnecessary allocation churn across repeated cleanup/setup cycles.

Fixes 585a9145886a ("selftests/mm: restore default nr_hugepages value during cleanup in hugetlb_reparenting_test.sh")
---
 tools/testing/selftests/mm/hugetlb_reparenting_test.sh | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/mm/hugetlb_reparenting_test.sh +2 -2
index 0dd31892ff67..11f914831146 100755
@@ -12,6 +12,8 @@ if [[ $(id -u) -ne 0 ]]; then
 fi
 
 nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
+trap 'echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages' EXIT INT TERM
+
 usage_file=usage_in_bytes
 
 if [[ "$1" == "-cgroup-v2" ]]; then
@@ -56,7 +58,6 @@ function cleanup() {
   rmdir "$CGROUP_ROOT"/a/b 2>/dev/null
   rmdir "$CGROUP_ROOT"/a 2>/dev/null
   rmdir "$CGROUP_ROOT"/test1 2>/dev/null
-  echo $nr_hugepgs >/proc/sys/vm/nr_hugepages
   set -e
 }
 
@@ -240,4 +241,3 @@ if [[ $do_umount ]]; then
   rm -rf $CGROUP_ROOT
 fi
 
-echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
Signature · 1 line
2.52.0
#5 lore raw

PATCH v7 5/13 selftests/mm: fix cgroup task placement and drop memory.current checks in hugetlb_reparenting_test.sh

In reply to Sayali Patil

The test currently moves the calling shell ($$) into the target cgroup before executing write_to_hugetlbfs. This results in the shell and any intermediate allocations being charged to the cgroup, introducing noise and nondeterminism in accounting. It also requires moving the shell back to the root cgroup after execution.

Spawn a helper process that joins the target cgroup and exec()'s write_to_hugetlbfs. This ensures that only the workload is accounted to the cgroup and avoids unintended charging from the shell.

The test currently validates both hugetlb usage and memory.current. However, memory.current includes internal memcg allocations and per-CPU batched accounting (MEMCG_CHARGE_BATCH), which are not synchronized and can vary across systems, leading to non-deterministic results.

Since hugetlb memory is accounted via hugetlb.<size>.current, memory.current is not a reliable indicator here. Drop memory.current checks and rely only on hugetlb controller statistics for stable and accurate validation.

Fixes 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
---
 .../selftests/mm/hugetlb_reparenting_test.sh  | 42 ++++++++-----------
 1 file changed, 18 insertions(+), 24 deletions(-)
tools/testing/selftests/mm/hugetlb_reparenting_test.sh +18 -24
index d724b6e45432..95f517c3bd16 100755
@@ -105,22 +105,17 @@ function assert_with_retry() {
 }
 
 function assert_state() {
-  local expected_a="$1"
-  local expected_a_hugetlb="$2"
-  local expected_b=""
+  local expected_a_hugetlb="$1"
   local expected_b_hugetlb=""
 
-  if [ ! -z ${3:-} ] && [ ! -z ${4:-} ]; then
-    expected_b="$3"
-    expected_b_hugetlb="$4"
+  if [ ! -z ${2:-} ]; then
+    expected_b_hugetlb="$2"
   fi
 
-  assert_with_retry "$CGROUP_ROOT/a/memory.$usage_file" "$expected_a"
   assert_with_retry \
 	  "$CGROUP_ROOT/a/hugetlb.${MB_DISPLAY}${UNIT}.$usage_file" "$expected_a_hugetlb"
 
-  if [[ -n "$expected_b" && -n "$expected_b_hugetlb" ]]; then
-    assert_with_retry "$CGROUP_ROOT/a/b/memory.$usage_file" "$expected_b"
+  if [[ -n "$expected_b_hugetlb" ]]; then
     assert_with_retry \
 	  "$CGROUP_ROOT/a/b/hugetlb.${MB_DISPLAY}${UNIT}.$usage_file" "$expected_b_hugetlb"
   fi
@@ -154,18 +149,17 @@ write_hugetlbfs() {
   local size="$3"
 
   if [[ $cgroup2 ]]; then
-    echo $$ >$CGROUP_ROOT/$cgroup/cgroup.procs
+    cg_file="$CGROUP_ROOT/$cgroup/cgroup.procs"
   else
     echo 0 >$CGROUP_ROOT/$cgroup/cpuset.mems
     echo 0 >$CGROUP_ROOT/$cgroup/cpuset.cpus
-    echo $$ >"$CGROUP_ROOT/$cgroup/tasks"
-  fi
-  ./write_to_hugetlbfs -p "$path" -s "$size" -m 0 -o
-  if [[ $cgroup2 ]]; then
-    echo $$ >$CGROUP_ROOT/cgroup.procs
-  else
-    echo $$ >"$CGROUP_ROOT/tasks"
+    cg_file="$CGROUP_ROOT/$cgroup/tasks"
   fi
+
+  # Spawn helper to join cgroup before exec to ensure correct cgroup accounting
+  bash -c 'echo $$ > "$1"; exec ./write_to_hugetlbfs -p "$2" -s "$3" -m 0 -o' _ \
+	  "$cg_file" "$path" "$size" & pid=$!
+  wait "$pid"
   echo
 }
 
@@ -203,21 +197,21 @@ if [[ ! $cgroup2 ]]; then
   write_hugetlbfs a "$MNT"/test $size
 
   echo Assert memory charged correctly for parent use.
-  assert_state 0 $size 0 0
+  assert_state $size 0
 
   write_hugetlbfs a/b "$MNT"/test2 $size
 
   echo Assert memory charged correctly for child use.
-  assert_state 0 $(($size * 2)) 0 $size
+  assert_state $(($size * 2)) $size
 
   rmdir "$CGROUP_ROOT"/a/b
   echo Assert memory reparent correctly.
-  assert_state 0 $(($size * 2))
+  assert_state $(($size * 2))
 
   rm -rf "$MNT"/*
   umount "$MNT"
   echo Assert memory uncharged correctly.
-  assert_state 0 0
+  assert_state 0
 
   cleanup
 fi
@@ -231,16 +225,16 @@ echo write
 write_hugetlbfs a/b "$MNT"/test2 $size
 
 echo Assert memory charged correctly for child only use.
-assert_state 0 $(($size)) 0 $size
+assert_state $(($size)) $size
 
 rmdir "$CGROUP_ROOT"/a/b
 echo Assert memory reparent correctly.
-assert_state 0 $size
+assert_state $size
 
 rm -rf "$MNT"/*
 umount "$MNT"
 echo Assert memory uncharged correctly.
-assert_state 0 0
+assert_state 0
 
 cleanup
 
Signature · 1 line
2.52.0
#4 lore raw

PATCH v7 4/13 selftests/mm: fix hugetlb pathname construction in hugetlb_reparenting_test.sh

In reply to Sayali Patil

The hugetlb_reparenting_test.sh script constructs hugetlb cgroup memory interface file names based on the configured huge page size. The script formats the size only in MB units, which causes mismatches on systems using larger huge pages where the kernel exposes normalized units (e.g. "1GB" instead of "1024MB").

As a result, the test fails to locate the corresponding cgroup files when 1GB huge pages are configured.

Update the script to detect the huge page size and select the appropriate unit (MB or GB) so that the constructed paths match the kernel's hugetlb controller naming.

Also print an explicit "Fail" message when a test failure occurs to improve result visibility.

Fixes e487a5d513cb ("selftest/mm: make hugetlb_reparenting_test tolerant to async reparenting")
---
 .../selftests/mm/hugetlb_reparenting_test.sh       | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
tools/testing/selftests/mm/hugetlb_reparenting_test.sh +12 -2
index 11f914831146..d724b6e45432 100755
@@ -48,6 +48,13 @@ function get_machine_hugepage_size() {
 }
 
 MB=$(get_machine_hugepage_size)
+if (( MB >= 1024 )); then
+  UNIT="GB"
+  MB_DISPLAY=$((MB / 1024))
+else
+  UNIT="MB"
+  MB_DISPLAY=$MB
+fi
 
 function cleanup() {
   echo cleanup
@@ -88,6 +95,7 @@ function assert_with_retry() {
     if [[ $elapsed -ge $timeout ]]; then
       echo "actual = $((${actual%% *} / 1024 / 1024)) MB"
       echo "expected = $((${expected%% *} / 1024 / 1024)) MB"
+      echo FAIL
       cleanup
       exit 1
     fi
@@ -108,11 +116,13 @@ function assert_state() {
   fi
 
   assert_with_retry "$CGROUP_ROOT/a/memory.$usage_file" "$expected_a"
-  assert_with_retry "$CGROUP_ROOT/a/hugetlb.${MB}MB.$usage_file" "$expected_a_hugetlb"
+  assert_with_retry \
+	  "$CGROUP_ROOT/a/hugetlb.${MB_DISPLAY}${UNIT}.$usage_file" "$expected_a_hugetlb"
 
   if [[ -n "$expected_b" && -n "$expected_b_hugetlb" ]]; then
     assert_with_retry "$CGROUP_ROOT/a/b/memory.$usage_file" "$expected_b"
-    assert_with_retry "$CGROUP_ROOT/a/b/hugetlb.${MB}MB.$usage_file" "$expected_b_hugetlb"
+    assert_with_retry \
+	  "$CGROUP_ROOT/a/b/hugetlb.${MB_DISPLAY}${UNIT}.$usage_file" "$expected_b_hugetlb"
   fi
 }
 
Signature · 1 line
2.52.0
#6 lore raw

PATCH v7 6/13 selftests/mm: size tmpfs according to PMD page size in split_huge_page_test

In reply to Sayali Patil

The split_file_backed_thp() test mounts a tmpfs with a fixed size of "4m". This works on systems with smaller PMD page sizes, but fails on configurations where the PMD huge page size is larger (e.g. 16MB).

On such systems, the fixed 4MB tmpfs is insufficient to allocate even a single PMD-sized THP, causing the test to fail.

Fix this by sizing the tmpfs dynamically based on the runtime pmd_pagesize, allocating space for two PMD-sized pages.

Before patch:
running ./split_huge_page_test /tmp/xfs_dir_YTrI5E
--------------------------------------------------
TAP version 13
1..55
ok 1 Split zero filled huge pages successful
ok 2 Split huge pages to order 0 successful
ok 3 Split huge pages to order 2 successful
ok 4 Split huge pages to order 3 successful
ok 5 Split huge pages to order 4 successful
ok 6 Split huge pages to order 5 successful
ok 7 Split huge pages to order 6 successful
ok 8 Split huge pages to order 7 successful
ok 9 Split PTE-mapped huge pages successful
Please enable pr_debug in split_huge_pages_in_file() for more info. Failed to write data to testing file: Success (0)
Bail out! Error occurred
Planned tests != run tests (55 != 9)
Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
[FAIL]

After patch:
running ./split_huge_page_test /tmp/xfs_dir_bMvj6o
--------------------------------------------------
TAP version 13
1..55
ok 1 Split zero filled huge pages successful
ok 2 Split huge pages to order 0 successful
ok 3 Split huge pages to order 2 successful
ok 4 Split huge pages to order 3 successful
ok 5 Split huge pages to order 4 successful
ok 6 Split huge pages to order 5 successful
ok 7 Split huge pages to order 6 successful
ok 8 Split huge pages to order 7 successful
ok 9 Split PTE-mapped huge pages successful
Please enable pr_debug in split_huge_pages_in_file() for more info. Please check dmesg for more information
ok 10 File-backed THP split to order 0 test done
Please enable pr_debug in split_huge_pages_in_file() for more info. Please check dmesg for more information
ok 11 File-backed THP split to order 1 test done
Please enable pr_debug in split_huge_pages_in_file() for more info. Please check dmesg for more information
ok 12 File-backed THP split to order 2 test done
...
ok 55 Split PMD-mapped pagecache folio to order 7 at
in-folio offset 128 passed
Totals: pass:55 fail:0 xfail:0 xpass:0 skip:0 error:0 [PASS]
ok 1 split_huge_page_test /tmp/xfs_dir_bMvj6o

Fixes fbe37501b252 ("mm: huge_memory: debugfs for file-backed THP split")
---
 tools/testing/selftests/mm/split_huge_page_test.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/testing/selftests/mm/split_huge_page_test.c +4 -1
index 50c80ceb4988..4066de6e8ae0 100644
@@ -470,6 +470,8 @@ static void split_file_backed_thp(int order)
 	char tmpfs_template[] = "/tmp/thp_split_XXXXXX";
 	const char *tmpfs_loc = mkdtemp(tmpfs_template);
 	char testfile[INPUT_MAX];
+	unsigned long size = 2 * pmd_pagesize;
+	char opts[64];
 	ssize_t num_written, num_read;
 	char *file_buf1, *file_buf2;
 	uint64_t pgoff_start = 0, pgoff_end = 1024;
@@ -489,7 +491,8 @@ static void split_file_backed_thp(int order)
 		file_buf1[i] = (char)i;
 	memset(file_buf2, 0, pmd_pagesize);
 
-	status = mount("tmpfs", tmpfs_loc, "tmpfs", 0, "huge=always,size=4m");
+	snprintf(opts, sizeof(opts), "huge=always,size=%lu", size);
+	status = mount("tmpfs", tmpfs_loc, "tmpfs", 0, opts);
 
 	if (status)
 		ksft_exit_fail_msg("Unable to create a tmpfs for testing\n");
Signature · 1 line
2.52.0
#7 lore raw

PATCH v7 7/13 selftests/mm: free dynamically allocated PMD-sized buffers in split_huge_page_test

In reply to Sayali Patil

Dynamically allocated buffers of PMD size for file-backed THP operations (file_buf1 and file_buf2) were not freed on the success path and some failure paths. Since the function is called repeatedly in a loop for each split order, this can cause significant memory leaks.

On architectures with large PMD sizes, repeated leaks could exhaust system memory and trigger the OOM killer during test execution.

Ensure all allocated buffers are freed to maintain stable repeated test runs.

Fixes 035a112e5fd5 ("selftests/mm: make file-backed THP split work by writing PMD size data")
---
 .../selftests/mm/split_huge_page_test.c       | 22 ++++++++++++++-----
 1 file changed, 16 insertions(+), 6 deletions(-)
tools/testing/selftests/mm/split_huge_page_test.c +16 -6
index 4066de6e8ae0..7a8b64cf4aad 100644
@@ -473,12 +473,15 @@ static void split_file_backed_thp(int order)
 	unsigned long size = 2 * pmd_pagesize;
 	char opts[64];
 	ssize_t num_written, num_read;
-	char *file_buf1, *file_buf2;
+	char *file_buf1 = NULL, *file_buf2 = NULL;
 	uint64_t pgoff_start = 0, pgoff_end = 1024;
 	int i;
 
 	ksft_print_msg("Please enable pr_debug in split_huge_pages_in_file() for more info.\n");
 
+	if (!tmpfs_loc)
+		ksft_exit_fail_msg("mkdtemp failed\n");
+
 	file_buf1 = (char *)malloc(pmd_pagesize);
 	file_buf2 = (char *)malloc(pmd_pagesize);
 
@@ -494,8 +497,10 @@ static void split_file_backed_thp(int order)
 	snprintf(opts, sizeof(opts), "huge=always,size=%lu", size);
 	status = mount("tmpfs", tmpfs_loc, "tmpfs", 0, opts);
 
-	if (status)
-		ksft_exit_fail_msg("Unable to create a tmpfs for testing\n");
+	if (status) {
+		ksft_print_msg("Unable to create a tmpfs for testing\n");
+		goto out;
+	}
 
 	status = snprintf(testfile, INPUT_MAX, "%s/thp_file", tmpfs_loc);
 	if (status >= INPUT_MAX) {
@@ -547,10 +552,13 @@ static void split_file_backed_thp(int order)
 
 	status = umount(tmpfs_loc);
 	if (status) {
-		rmdir(tmpfs_loc);
-		ksft_exit_fail_msg("Unable to umount %s\n", tmpfs_loc);
+		ksft_print_msg("Unable to umount %s\n", tmpfs_loc);
+		goto out;
 	}
 
+	free(file_buf1);
+	free(file_buf2);
+
 	status = rmdir(tmpfs_loc);
 	if (status)
 		ksft_exit_fail_msg("cannot remove tmp dir: %s\n", strerror(errno));
@@ -563,8 +571,10 @@ static void split_file_backed_thp(int order)
 	close(fd);
 cleanup:
 	umount(tmpfs_loc);
-	rmdir(tmpfs_loc);
 out:
+	free(file_buf1);
+	free(file_buf2);
+	rmdir(tmpfs_loc);
 	ksft_exit_fail_msg("Error occurred\n");
 }
 
Signature · 1 line
2.52.0
#8 lore raw

PATCH v7 8/13 selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap

In reply to Sayali Patil

Previously, register_region_with_uffd() created a new anonymous mapping and overwrote the address supplied by the caller before registering the range with userfaultfd.

As a result, userfaultfd was applied to an unrelated anonymous mapping instead of the hugetlb region used by the test.

Remove the extra mmap() and register the caller-provided address range directly using UFFDIO_REGISTER_MODE_MISSING, so that faults are generated for the hugetlb mapping used by the test.

This ensures userfaultfd operates on the actual hugetlb test region and validates the expected fault handling.

Before patch:
running ./hugetlb-mremap
-------------------------
TAP version 13
1..1
Map haddr: Returned address is 0x7eaa40000000 Map daddr: Returned address is 0x7daa40000000 Map vaddr: Returned address is 0x7faa40000000 Address returned by mmap() = 0x7fff9d000000
Mremap: Returned address is 0x7faa40000000 First hex is 0
First hex is 3020100
ok 1 Read same data
Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 [PASS]
ok 1 hugetlb-mremap

After patch:
running ./hugetb-mremap
-------------------------
TAP version 13
1..1
Map haddr: Returned address is 0x7eaa40000000
Map daddr: Returned address is 0x7daa40000000
Map vaddr: Returned address is 0x7faa40000000 Registered memory at address 0x7eaa40000000 with userfaultfd
Mremap: Returned address is 0x7faa40000000
First hex is 0
First hex is 3020100
ok 1 Read same data
Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 [PASS]
ok 1 hugetlb-mremap

Fixes 12b613206474 ("mm, hugepages: add hugetlb vma mremap() test")
---
 tools/testing/selftests/mm/hugetlb-mremap.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
tools/testing/selftests/mm/hugetlb-mremap.c +5 -16
index d239905790dd..00b4c2cc95a6 100644
@@ -86,25 +86,14 @@ static void register_region_with_uffd(char *addr, size_t len)
 	if (ioctl(uffd, UFFDIO_API, &uffdio_api) == -1)
 		ksft_exit_fail_msg("ioctl-UFFDIO_API: %s\n", strerror(errno));
 
-	/* Create a private anonymous mapping. The memory will be
-	 * demand-zero paged--that is, not yet allocated. When we
-	 * actually touch the memory, it will be allocated via
-	 * the userfaultfd.
-	 */
-
-	addr = mmap(NULL, len, PROT_READ | PROT_WRITE,
-		    MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-	if (addr == MAP_FAILED)
-		ksft_exit_fail_msg("mmap: %s\n", strerror(errno));
-
-	ksft_print_msg("Address returned by mmap() = %p\n", addr);
-
-	/* Register the memory range of the mapping we just created for
-	 * handling by the userfaultfd object. In mode, we request to track
-	 * missing pages (i.e., pages that have not yet been faulted in).
+	/* Register the passed memory range for handling by the userfaultfd object.
+	 * In mode, we request to track missing pages
+	 * (i.e., pages that have not yet been faulted in).
 	 */
 	if (uffd_register(uffd, addr, len, true, false, false))
 		ksft_exit_fail_msg("ioctl-UFFDIO_REGISTER: %s\n", strerror(errno));
+
+	ksft_print_msg("Registered memory at address %p with userfaultfd\n", addr);
 }
 
 int main(int argc, char *argv[])
Signature · 1 line
2.52.0
#9 lore raw

PATCH v7 9/13 selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap

In reply to Sayali Patil

The hugetlb-mremap selftest reserves the destination address using a anonymous base-page mapping before calling mremap() with MREMAP_FIXED, while the source region is hugetlb-backed.

When remapping a hugetlb mapping into a base-page VMA may fail with:

mremap: Device or resource busy

This is observed on powerpc hash MMU systems where slice constraints and page size incompatibilities prevent the remap.

Ensure the destination region is created using MAP_HUGETLB so that both source and destination VMAs are hugetlb-backed and compatible.

Update the FLAGS macro to include MAP_HUGETLB | MAP_SHARED so that both mappings are hugetlb-backed and compatible. Also use the macro for the mmap() calls to avoid repeating the flag combination.

This ensures the test reliably exercises hugetlb mremap instead of failing due to VMA type mismatch.

Fixes 12b613206474 ("mm, hugepages: add hugetlb vma mremap() test")
---
 tools/testing/selftests/mm/hugetlb-mremap.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
tools/testing/selftests/mm/hugetlb-mremap.c +4 -7
index 00b4c2cc95a6..ed3d92e862d8 100644
@@ -32,7 +32,7 @@
 #define MB_TO_BYTES(x) (x * 1024 * 1024)
 
 #define PROTECTION (PROT_READ | PROT_WRITE | PROT_EXEC)
-#define FLAGS (MAP_SHARED | MAP_ANONYMOUS)
+#define FLAGS (MAP_HUGETLB | MAP_SHARED)
 
 static void check_bytes(char *addr)
 {
@@ -132,23 +132,20 @@ int main(int argc, char *argv[])
 
 	/* mmap to a PUD aligned address to hopefully trigger pmd sharing. */
 	unsigned long suggested_addr = 0x7eaa40000000;
-	void *haddr = mmap((void *)suggested_addr, length, PROTECTION,
-			   MAP_HUGETLB | MAP_SHARED | MAP_POPULATE, fd, 0);
+	void *haddr = mmap((void *)suggested_addr, length, PROTECTION, FLAGS, fd, 0);
 	ksft_print_msg("Map haddr: Returned address is %p\n", haddr);
 	if (haddr == MAP_FAILED)
 		ksft_exit_fail_msg("mmap1: %s\n", strerror(errno));
 
 	/* mmap again to a dummy address to hopefully trigger pmd sharing. */
 	suggested_addr = 0x7daa40000000;
-	void *daddr = mmap((void *)suggested_addr, length, PROTECTION,
-			   MAP_HUGETLB | MAP_SHARED | MAP_POPULATE, fd, 0);
+	void *daddr = mmap((void *)suggested_addr, length, PROTECTION, FLAGS, fd, 0);
 	ksft_print_msg("Map daddr: Returned address is %p\n", daddr);
 	if (daddr == MAP_FAILED)
 		ksft_exit_fail_msg("mmap3: %s\n", strerror(errno));
 
 	suggested_addr = 0x7faa40000000;
-	void *vaddr =
-		mmap((void *)suggested_addr, length, PROTECTION, FLAGS, -1, 0);
+	void *vaddr = mmap((void *)suggested_addr, length, PROTECTION, FLAGS, fd, 0);
 	ksft_print_msg("Map vaddr: Returned address is %p\n", vaddr);
 	if (vaddr == MAP_FAILED)
 		ksft_exit_fail_msg("mmap2: %s\n", strerror(errno));
Signature · 1 line
2.52.0
#10 lore raw

PATCH v7 10/13 selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported

In reply to Sayali Patil

The uffd-wp-mremap test requires the UFFD_FEATURE_PAGEFAULT_FLAG_WP capability. On systems where userfaultfd write-protect is not supported, uffd_register() fails and the test reports failures.

Check for the required feature at startup and skip the test when the UFFD_FEATURE_PAGEFAULT_FLAG_WP capability is not present, preventing false failures on unsupported configurations.

Before patch:
running ./uffd-wp-mremap
------------------------
[INFO] detected THP size: 256 KiB
[INFO] detected THP size: 512 KiB
[INFO] detected THP size: 1024 KiB
[INFO] detected THP size: 2048 KiB
[INFO] detected hugetlb page size: 2048 KiB
[INFO] detected hugetlb page size: 1048576 KiB
1..24
[RUN] test_one_folio(size=65536, private=false, swapout=false, hugetlb=false)
not ok 1 uffd_register() failed
[RUN] test_one_folio(size=65536, private=true, swapout=false, hugetlb=false)
not ok 2 uffd_register() failed
[RUN] test_one_folio(size=65536, private=false, swapout=true, hugetlb=false)
not ok 3 uffd_register() failed
[RUN] test_one_folio(size=65536, private=true, swapout=true, hugetlb=false)
not ok 4 uffd_register() failed
[RUN] test_one_folio(size=262144, private=false, swapout=false, hugetlb=false)
not ok 5 uffd_register() failed
[RUN] test_one_folio(size=524288, private=false, swapout=false, hugetlb=false)
not ok 6 uffd_register() failed
.
.
.
Bail out! 24 out of 24 tests failed
Totals: pass:0 fail:24 xfail:0 xpass:0 skip:0 error:0
[FAIL]
not ok 1 uffd-wp-mremap # exit=1

After patch:
running ./uffd-wp-mremap
------------------------
1..0 # SKIP uffd-wp feature not supported
[SKIP]
ok 1 uffd-wp-mremap # SKIP

---
 tools/testing/selftests/mm/uffd-wp-mremap.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
tools/testing/selftests/mm/uffd-wp-mremap.c +13 -0
index 90ac410c6c6f..c973d6722720 100644
@@ -19,6 +19,17 @@ static size_t thpsizes[20];
 static int nr_hugetlbsizes;
 static unsigned long hugetlbsizes[10];
 
+static void check_uffd_wp_feature_supported(void)
+{
+	uint64_t features = 0;
+
+	if (uffd_get_features(&features))
+		ksft_exit_skip("failed to get available features (%d)\n", errno);
+
+	if (!(features & UFFD_FEATURE_PAGEFAULT_FLAG_WP))
+		ksft_exit_skip("uffd-wp feature not supported\n");
+}
+
 static int detect_thp_sizes(size_t sizes[], int max)
 {
 	int count = 0;
@@ -338,6 +349,8 @@ int main(int argc, char **argv)
 
 	hugepage_save_settings(true, true);
 
+	check_uffd_wp_feature_supported();
+
 	pagesize = getpagesize();
 	nr_thpsizes = detect_thp_sizes(thpsizes, ARRAY_SIZE(thpsizes));
 	nr_hugetlbsizes = hugetlb_setup(1, hugetlbsizes, ARRAY_SIZE(hugetlbsizes));
Signature · 1 line
2.52.0
#13 lore raw

PATCH v7 12/13 selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category

In reply to Sayali Patil

run_vmtests.sh contains special handling to ensure the hwpoison_inject module is available for the memory-failure tests. This logic was implemented outside of run_test(), making the setup category-specific but managed globally.

Move the hwpoison_inject handling into run_test() and restrict it to the memory-failure category so that:
1. the module is checked and loaded only when memory-failure tests run,
2. the test is skipped if the module or the debugfs interface (/sys/kernel/debug/hwpoison/) is not available.
3. the module is unloaded after the test if it was loaded by the script.

This localizes category-specific setup and makes the test flow consistent with other per-category preparations.

While updating this logic, fix the module availability check. The script previously used:

modprobe -R hwpoison_inject

The -R option prints the resolved module name to stdout, causing every run to print:

hwpoison_inject

in the test output, even when no action is required, introducing unnecessary noise.

Replace this with:

modprobe -n hwpoison_inject

which verifies that the module is loadable without producing output, keeping the selftest logs clean and consistent.

Also, ensure that skipped tests do not override a previously recorded failure. A skipped test currently sets exitcode to ksft_skip even if a prior test has failed, which can mask failures in the final exit status. Update the logic to only set exitcode to ksft_skip when no failure has been recorded.

Fixes ff4ef2fbd101 ("selftests/mm: add memory failure anonymous page test")
---
 tools/testing/selftests/mm/run_vmtests.sh | 62 +++++++++++++++--------
 1 file changed, 41 insertions(+), 21 deletions(-)
tools/testing/selftests/mm/run_vmtests.sh +41 -21
index 043aa3ed2596..8c296dedf047 100755
@@ -180,6 +180,9 @@ pretty_name() {
 # Usage: run_test [test binary] [arbitrary test arguments...]
 run_test() {
 	if test_selected ${CATEGORY}; then
+		local skip=0
+		local LOADED_HWPOISON_INJECT_MOD=0
+
 		# On memory constrainted systems some tests can fail to allocate hugepages.
 		# perform some cleanup before the test for a higher success rate.
 		if [ ${CATEGORY} == "thp" -o ${CATEGORY} == "hugetlb" ]; then
@@ -194,13 +197,45 @@ run_test() {
 			fi
 		fi
 
+		# Ensure hwpoison_inject is available for memory-failure tests
+		if [ "${CATEGORY}" = "memory-failure" ]; then
+			# Try to load hwpoison_inject if not present.
+			HWPOISON_DIR=/sys/kernel/debug/hwpoison/
+			if [ ! -d "$HWPOISON_DIR" ]; then
+				if ! modprobe -n hwpoison_inject > /dev/null 2>&1; then
+					echo "Module hwpoison_inject not found, skipping..." \
+						| tap_prefix
+					skip=1
+				else
+					modprobe hwpoison_inject > /dev/null 2>&1
+					LOADED_HWPOISON_INJECT_MOD=1
+					if [ ! -d "$HWPOISON_DIR" ]; then
+						echo "hwpoison debugfs interface not present" \
+							| tap_prefix
+						skip=1
+					fi
+				fi
+			fi
+
+		fi
+
 		local test=$(pretty_name "$*")
 		local title="running $*"
 		local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
 		printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" | tap_prefix
 
-                ("$@" 2>&1) | tap_prefix
-                local ret=${PIPESTATUS[0]}
+		if [ $skip -eq 1 ]; then
+			local ret=$ksft_skip
+		else
+			("$@" 2>&1) | tap_prefix
+			local ret=${PIPESTATUS[0]}
+		fi
+
+		# Unload hwpoison_inject if we loaded it
+		if [ "${LOADED_HWPOISON_INJECT_MOD}" = "1" ]; then
+			modprobe -r hwpoison_inject > /dev/null 2>&1
+		fi
+
 		count_total=$(( count_total + 1 ))
 		if [ $ret -eq 0 ]; then
 			count_pass=$(( count_pass + 1 ))
@@ -210,7 +245,9 @@ run_test() {
 			count_skip=$(( count_skip + 1 ))
 			echo "[SKIP]" | tap_prefix
 			echo "ok ${count_total} ${test} # SKIP" | tap_output
-			exitcode=$ksft_skip
+			if [ $exitcode -eq 0 ]; then
+				exitcode=$ksft_skip
+			fi
 		else
 			count_fail=$(( count_fail + 1 ))
 			echo "[FAIL]" | tap_prefix
@@ -422,24 +459,7 @@ CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned
 
 CATEGORY="rmap" run_test ./rmap
 
-# Try to load hwpoison_inject if not present.
-HWPOISON_DIR=/sys/kernel/debug/hwpoison/
-if [ ! -d "$HWPOISON_DIR" ]; then
-	if ! modprobe -q -R hwpoison_inject; then
-		echo "Module hwpoison_inject not found, skipping..."
-	else
-		modprobe hwpoison_inject > /dev/null 2>&1
-		LOADED_MOD=1
-	fi
-fi
-
-if [ -d "$HWPOISON_DIR" ]; then
-	CATEGORY="memory-failure" run_test ./memory-failure
-fi
-
-if [ -n "${LOADED_MOD}" ]; then
-	modprobe -r hwpoison_inject > /dev/null 2>&1
-fi
+CATEGORY="memory-failure" run_test ./memory-failure
 
 echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}" | tap_prefix
 echo "1..${count_total}" | tap_output
Signature · 1 line
2.52.0
#11 lore raw

PATCH v7 11/13 selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero

In reply to Sayali Patil

uffd-stress currently fails when the computed nr_pages_per_cpu evaluates to zero:

nr_pages_per_cpu = bytes / page_size / nr_parallel

This can occur on systems with large hugepage sizes (e.g. 1GB) and a high number of CPUs, where the total allocated memory is sufficient overall but not enough to provide at least one page per cpu.

In such cases, the failure is due to insufficient test resources rather than incorrect kernel behaviour. Update the test
to treat this condition as a test skip instead of reporting an error.

Fixes db0f1c138f18 ("selftests/mm: print some details when uffd-stress gets bad params")
---
 tools/testing/selftests/mm/uffd-stress.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/mm/uffd-stress.c +3 -3
index 43cc79590136..39e13e2078a9 100644
@@ -489,9 +489,9 @@ int main(int argc, char **argv)
 
 	gopts->nr_pages_per_cpu = bytes / gopts->page_size / gopts->nr_parallel;
 	if (!gopts->nr_pages_per_cpu) {
-		_err("pages_per_cpu = 0, cannot test (%lu / %lu / %lu)",
-			bytes, gopts->page_size, gopts->nr_parallel);
-		usage();
+		ksft_print_msg("pages_per_cpu = 0, cannot test (%zu / %lu / %lu)\n",
+			       bytes, gopts->page_size, gopts->nr_parallel);
+		return KSFT_SKIP;
 	}
 
 	bounces = atoi(argv[3]);
Signature · 1 line
2.52.0
#14 lore raw

PATCH v7 13/13 selftests/mm: clarify alternate unmapping in compaction_test

In reply to Sayali Patil

Add a comment explaining that every other entry in the list is unmapped to intentionally create fragmentation with locked pages before invoking check_compaction().

Fixes bd67d5c15cc1 ("Test compaction of mlocked memory")
---
 tools/testing/selftests/mm/compaction_test.c | 3 +++
 1 file changed, 3 insertions(+)
tools/testing/selftests/mm/compaction_test.c +3 -0
index de0633f9a7e5..5b582588e015 100644
@@ -181,6 +181,9 @@ int main(int argc, char **argv)
 		mem_fragmentable_MB -= MAP_SIZE_MB;
 	}
 
+	/* Unmap every other entry in the list to create fragmentation with
+	 * locked pages before invoking check_compaction().
+	 */
 	for (entry = list; entry != NULL; entry = entry->next) {
 		munmap(entry->map, MAP_SIZE);
 		if (!entry->next)
Signature · 1 line
2.52.0
#12 lore raw

Re: [PATCH v7 11/13] selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero

In reply to Sayali Patil
Quoted 29 lines · Sayali Patil

uffd-stress currently fails when the computed nr_pages_per_cpu evaluates to zero:

nr_pages_per_cpu = bytes / page_size / nr_parallel

This can occur on systems with large hugepage sizes (e.g. 1GB) and a high number of CPUs, where the total allocated memory is sufficient overall but not enough to provide at least one page per cpu.

In such cases, the failure is due to insufficient test resources rather than incorrect kernel behaviour. Update the test
to treat this condition as a test skip instead of reporting an error.

Fixes db0f1c138f18 ("selftests/mm: print some details when uffd-stress gets bad params")
---
  tools/testing/selftests/mm/uffd-stress.c | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/mm/uffd-stress.c +0 -0
index 43cc79590136..39e13e2078a9 100644
@@ -489,9 +489,9 @@ int main(int argc, char **argv)
 
  	gopts->nr_pages_per_cpu = bytes / gopts->page_size / gopts->nr_parallel;

tools/testing/selftests/mm/uffd-stress.c int main(int argc, char **argv) · line 497

Quoted 10 lines
tools/testing/selftests/mm/uffd-stress.c +3 -3
  	if (!gopts->nr_pages_per_cpu) {
-		_err("pages_per_cpu = 0, cannot test (%lu / %lu / %lu)",
-			bytes, gopts->page_size, gopts->nr_parallel);
-		usage();
+		ksft_print_msg("pages_per_cpu = 0, cannot test (%zu / %lu / %lu)\n",
+			       bytes, gopts->page_size, gopts->nr_parallel);
+		return KSFT_SKIP;
  	}
 
  	bounces = atoi(argv[3]);

Hi Andrew,
Can you please apply the below fixlet on top of this patch as suggested by Sashiko.

From aa8f2eea63defd9b9c1342b83838f48e93e1b918 Mon Sep 17 00:00:00 2001
From: Sayali Patil <[email protected]>
Date: Thu, 21 May 2026 13:32:51 +0530
Subject: [PATCH] [fixlet] selftests/mm: use ksft_exit_skip() instead of
KSFT_SKIP in uffd-stress

When nr_pages_per_cpu evaluates to zero, the test is skipped by printing a message and returning KSFT_SKIP manually.

Replace this with ksft_exit_skip(), which prints the skip message and exits with the correct skip status in a single helper, making the code consistent with other selftests.

---
 tools/testing/selftests/mm/uffd-stress.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
tools/testing/selftests/mm/uffd-stress.c +1 -2
index 39e13e2078a9..3401dd6028f0 100644
@@ -489,9 +489,8 @@ int main(int argc, char **argv)
 
 	gopts->nr_pages_per_cpu = bytes / gopts->page_size / gopts->nr_parallel;
 	if (!gopts->nr_pages_per_cpu) {
-		ksft_print_msg("pages_per_cpu = 0, cannot test (%zu / %lu / %lu)\n",
+		ksft_exit_skip("pages_per_cpu = 0, cannot test (%zu / %lu / %lu)\n",
 			       bytes, gopts->page_size, gopts->nr_parallel);
-		return KSFT_SKIP;
 	}
 
 	bounces = atoi(argv[3]);
Signature · 5 lines
2.52.0


Thanks,
Sayali
#15 lore raw
In reply to Sayali Patil
Quoted 176 lines · Sayali Patil

Hi all,

Powerpc systems with a 64K base page size exposed several issues while running mm selftests. Some tests assume specific hugetlb configurations, use incorrect interfaces, or fail instead of skipping when the required kernel features are not available.

This series fixes these issues and improves test robustness.

Please review the patches and provide any feedback or suggestions for improvement.

Thanks,
Sayali

---
v6->v7
- Rebased onto the latest mm-new branch, top commit of the base is commit 0cec77cfd531 ("mm/filemap: fix page_cache_prev_miss() when no hole is found")
- Dropped "selftest/mm: align memory size to huge page size in hugepage-mremap test":
Similar patch has already been merged.
- For "selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero":
Changed format specifier of bytes to %zu as per review
comment.
- For "selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category":
Added condition to avoid executing the test pipeline for skipped tests and assign ret directly.

v6: https://lore.kernel.org/all/[email protected]/
---
v5->v6
- For "selftests/mm: restore default nr_hugepages value via exit trap in charge_reserved_hugetlb.sh":
Extended trap to include INT and TERM in hugetlb tests to ensure nr_hugepages is restored on signal-based exits.
- For "selftests/mm: restore default nr_hugepages value via exit trap in hugetlb_reparenting_test.sh":
Extended trap to include INT and TERM in hugetlb tests to ensure nr_hugepages is restored on signal-based exits.
- For "selftests/mm: fix cgroup task placement and drop memory.current checks in hugetlb_reparenting_test.sh":
Updated the subshell invocation to pass variables as positional arguments instead of interpolating them into the command string as per review comment.
- For "selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category":
Updated the condition to avoid unconditional module removal and ensures it is only unloaded if loaded by the test.

v5: https://lore.kernel.org/all/[email protected]/
---
---
v4->v5
- For "selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category":
Renamed LOADED_MOD to LOADED_HWPOISON_INJECT_MOD as per review comment.
- Dropped "selftests/cgroup: extend test_hugetlb_memcg.c to support all huge page sizes":
Due to intermittent failures observed on some systems.
- Added Tested-by from Venkat for all patches.
- Added Reviewed-by from Zi yan for patches 7,8 and 13.
- Added Acked-by from Zi yan for patches 1 and 3.

v4: https://lore.kernel.org/all/[email protected]/
---
v3->v4

- selftests/mm: restore default nr_hugepages value via EXIT trap in charge_reserved_hugetlb.sh:
Updated to use an EXIT trap to restore the original nr_hugepages once at script termination, ensuring reliable restoration on all exit paths.

- selftest/mm: fix cgroup task placement and drop memory.current checks in hugetlb_reparenting_test.sh:
Updated to use a deterministic synchronization method by migrating the workload process within a wrapper subshell before calling exec() to ensure correct cgroup accounting.

- selftest/mm: align memory size to huge page size in hugepage-mremap test:
Update test code directly to align memory allocations to the hugepage size, rather than modifying run_vmtests.sh. This replaces the previous commit “adjust hugepage-mremap test size for large huge pages” with a cleaner, direct approach in the test itself.

- selftests/mm: ensure destination is hugetlb-backed in hugepage-mremap:
Updated to remove MAP_POPULATE flag for the mmap call as per review comment.

- selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported:
Updated as per review comment to initialize features to zero and exit on all uffd_get_features() failures, avoiding spurious test errors.

- selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category:
Declared LOADED_MOD as local variable and avoided a redundant skip message when the module is not found.
Updated logic to set exitcode to ksft_skip only when no failure has been recorded.

- selftests/cgroup: extend test_hugetlb_memcg.c to support all huge page sizes:
Updated to skip on memory constraints instead of returning EXIT_FAILURE.
Updated the logic to fully account for the scenario when the per-CPU stock is empty and a refill charges MEMCG_CHARGE_BATCH. Updated to avoid overflow on 32-bit systems for memory.max value.

- Included "selftests/mm: restore default nr_hugepages value via EXIT trap in hugetlb_reparenting_test.sh"

- Included "selftests/mm: free dynamically allocated PMD-sized buffers in split_huge_page_test"

- Included "selftests/mm: clarify alternate unmapping in compaction_test"

- Dropped "selftests/mm: fix double increment in linked list cleanup in compaction_test":
The behaviour is intentional.

v3: https://lore.kernel.org/all/[email protected]/

---
v2->v3
- selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported:
Rename function to check_uffd_wp_feature_supported() as suggested in review.
- selftest/mm: fix cgroup task placement and drop memory.current checks in hugetlb_reparenting_test.sh:
Drop memory.current validation from the hugetlb reparenting test. Keep tolerance at 7MB (reverting earlier increase to 8MB in v1).
- Included "selftests/mm: allow PUD-level entries in compound testcase of hmm tests" patch:
Extend the compound testcase checks to accept PUD-level mappings.
- Included "selftests/mm: replace hardcoded THP size with runtime PMD page size in hmm tests" patch:
Use read_pmd_pagesize() instead of TWOMEG and cap maximum THPs in benchmarks to avoid integer overflow.

v2: https://lore.kernel.org/all/[email protected]/

---
v1->v2
- For "selftests/mm: ensure destination is hugetlb-backed in hugepage-mremap":
update FLAGS definition to MAP_HUGETLB | MAP_SHARED | MAP_POPULATE and used it for mmap() calls as suggested during review.

v1: https://lore.kernel.org/all/[email protected]/
---

Sayali Patil (13):
selftests/mm: restore default nr_hugepages value via exit trap in
charge_reserved_hugetlb.sh
selftests/mm: fix hugetlb pathname construction in
charge_reserved_hugetlb.sh
selftests/mm: restore default nr_hugepages value via exit trap in
hugetlb_reparenting_test.sh
selftests/mm: fix hugetlb pathname construction in
hugetlb_reparenting_test.sh
selftests/mm: fix cgroup task placement and drop memory.current checks
in hugetlb_reparenting_test.sh
selftests/mm: size tmpfs according to PMD page size in
split_huge_page_test
selftests/mm: free dynamically allocated PMD-sized buffers in
split_huge_page_test
selftest/mm: register existing mapping with userfaultfd in
hugetlb-mremap
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero selftests/mm: move hwpoison setup into run_test() and silence modprobe
output for memory-failure category
selftests/mm: clarify alternate unmapping in compaction_test

Quoted 10 lines
  .../selftests/mm/charge_reserved_hugetlb.sh   | 45 +++++++++-----
  tools/testing/selftests/mm/compaction_test.c  |  3 +
  tools/testing/selftests/mm/hugetlb-mremap.c   | 32 +++-------
  .../selftests/mm/hugetlb_reparenting_test.sh  | 60 +++++++++---------
  tools/testing/selftests/mm/run_vmtests.sh     | 62 ++++++++++++-------
  .../selftests/mm/split_huge_page_test.c       | 27 +++++---
  tools/testing/selftests/mm/uffd-stress.c      |  6 +-
  tools/testing/selftests/mm/uffd-wp-mremap.c   | 13 ++++
  8 files changed, 151 insertions(+), 97 deletions(-)

Hi Andrew,

I checked the AI review comments. Most of them appear to be relatively minor.

I have sent one fixup patch ("selftests/mm: use ksft_exit_skip() instead of KSFT_SKIP in uffd-stress") for the comment in "selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero". The remaining comments were either already discussed earlier or can be addressed later if needed.

Please let me know if you have any additional comments or concerns.

Thanks,
Sayali

maintainer
#16 lore raw
In reply to Sayali Patil
Quoted 6 lines · On Thu, 21 May 2026 12:03:26 +0530 Sayali Patil <[email protected]> wrote:

Powerpc systems with a 64K base page size exposed several issues while running mm selftests. Some tests assume specific hugetlb configurations, use incorrect interfaces, or fail instead of skipping when the required kernel features are not available.

This series fixes these issues and improves test robustness.

Thanks, I've re-added this series to mm.git's mm-new branch.

Quoted 7 lines

I checked the AI review comments. Most of them appear to be relatively minor.

I have sent one fixup patch ("selftests/mm: use ksft_exit_skip() instead of KSFT_SKIP in uffd-stress") for the comment in "selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero". The remaining comments were either already discussed earlier or can be addressed later if needed.

Cool, thanks for letting us know where we stand with the AI review. It helps!