btrfs: fix generic/362 failures with nodatasum

[BUG]
With the previous bug of short direct writes fixed, test case generic/362 (*) still fails with the following error with nodatasum mount option:

generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad)
- output mismatch (see /home/adam/xfstests/results//generic/362.out.bad)

    --- tests/generic/362.out	2024-08-24 15:31:37.200000000 +0930
    +++ /home/adam/xfstests/results//generic/362.out.bad	2026-05-27 10:13:09.072485767 +0930
    @@ -1,2 +1,3 @@
     QA output created by 362
    +Wrong file size after first write, got 8192 expected 4096
     Silence is golden
    ...

*: If the test case has been executed before with default data checksum, the failure will not reproduce. Need the following fix to make it reliably reproducible:
https://lore.kernel.org/linux-btrfs/[email protected]/

[CAUSE]
Inside btrfs_dio_iomap_begin() for a direct write, we increase the isize if it's beyond the current isize.

But if the direct io finished short , we do not revert the isize to the previous value nor to the short write end.

Then if we need to fall back to buffered writes, and the write has IOCB_APPEND flag, then the buffered write will be positioned at the incorrect isize.

The call chain looks like this:

btrfs_direct_write(pos=0, length=4K)

 |- __iomap_dio_rw()
 |  |- iomap_iter()
 |  |  |- btrfs_dio_iomap_begin()
 |  |     |- btrfs_get_blocks_direct_write()
 |  |        |- i_size_write()
 |  |           Which updates the isize to the write end (4K).
 |  |
 |  |- iomap_dio_iter()
 |  |  Failed with -EFAULT on the first page.
 |  |
 |  |- iomap_iter()
 |  |  |- btrfs_dio_iomap_end()
 |  |     Detects a short write, return -ENOTBLK
 |  |- if (ret == -ENOTBLK) { ret = 0;}
 |     Which resets the return value.
 |
 |- ret = iomap_dio_complet()
 |  Which returns 0.
 |
 |- btrfs_buffered_write(iocb, from);

|- generic_write_checks()
|- iocb->ki_pos = i_size_read()
Which is still the new size (4K), other than the original isize 0.

[FIX]
Introduce btrfs_dio_data::updated_isize and btrfs_dio_data::old_isize, so that if btrfs_get_blocks_direct_write() enlarged the inode size for the first time, we still know the old isize.

Then if we got a short write, and btrfs_dio_data::updated_isize is set, revert to the correct isize based on the old isize and the short write end.

[REASON FOR NO FIXES TAG]
The bug is again very old, before commit f85781fb505e ("btrfs: switch to iomap for direct IO") we are already increasing isize without a proper rollback for short writes.

Thus only a CC to stable.

Cc [email protected] # 5.15+

Signed-off-by Qu Wenruo <[email protected]>

---
 fs/btrfs/direct-io.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

fs/btrfs/direct-io.c +24 -1

index 88cb2e82a507..fd53fac7186e 100644
@@ -15,10 +15,16 @@
 
 struct btrfs_dio_data {
 	ssize_t submitted;
+	/*
+	 * If we got a short dio write and @updated_isize is set,
+	 * revert to the old isize.
+	 */
+	loff_t old_isize;
 	struct extent_changeset *data_reserved;
 	struct btrfs_ordered_extent *ordered;
 	bool data_space_reserved;
 	bool nocow_done;
+	bool updated_isize;
 };
 
 struct btrfs_dio_private {

@@ -228,6 +234,7 @@ static int btrfs_get_blocks_direct_write(struct extent_map **map,
 	bool space_reserved = false;
 	u64 len = *lenp;
 	u64 prev_len;
+	loff_t old_isize;
 	int ret = 0;
 
 	/*

@@ -341,8 +348,14 @@ static int btrfs_get_blocks_direct_write(struct extent_map **map,
 	 * Need to update the i_size under the extent lock so buffered
 	 * readers will get the updated i_size when we unlock.
 	 */
-	if (start + len > i_size_read(inode))
+	old_isize = i_size_read(inode);
+	if (start + len > old_isize) {
+		if (!dio_data->updated_isize) {
+			dio_data->old_isize = old_isize;
+			dio_data->updated_isize = true;
+		}
 		i_size_write(inode, start + len);
+	}
 out:
 	if (ret && space_reserved) {
 		btrfs_delalloc_release_extents(BTRFS_I(inode), len);

@@ -637,6 +650,16 @@ static int btrfs_dio_iomap_end(struct inode *inode, loff_t pos, loff_t length,
 			btrfs_mark_ordered_extent_truncated(dio_data->ordered, 0);
 			btrfs_finish_ordered_extent(dio_data->ordered,
 						    pos, length, true);
+			if (dio_data->updated_isize) {
+				u64 new_isize;
+
+				if (submitted == 0)
+					new_isize = dio_data->old_isize;
+				else
+					new_isize = max(pos, dio_data->old_isize);
+				i_size_write(inode, new_isize);
+				dio_data->updated_isize = false;
+			}
 		} else {
 			btrfs_unlock_dio_extent(&BTRFS_I(inode)->io_tree, pos,
 						pos + length - 1, NULL);

Signature · 1 line

2.54.0

[BUG]
The test case generic/362 will fail with "nodatasum" mount option (*):

MOUNT_OPTIONS -- -o nodatasum /dev/mapper/test-scratch1 /mnt/scratch

generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad)

    --- tests/generic/362.out	2024-08-24 15:31:37.200000000 +0930
    +++ /home/adam/xfstests/results//generic/362.out.bad	2026-05-27 10:21:17.574771567 +0930
    @@ -1,2 +1,3 @@
     QA output created by 362
    +First write failed: Input/output error
     Silence is golden
    ...

*: If the test case has been executed before with default data checksum, the failure will not reproduce. Need the following fix to make it reliably reproducible:
https://lore.kernel.org/linux-btrfs/[email protected]/

[CAUSE]
Inside __iomap_dio_rw(), the -EFAULT/-ENOTBLK error is not directly returned. Thus we never got an error pointer from __iomap_dio_rw().

The call chain looks like this:

btrfs_direct_write()

 |- btrfs_dio_write()
 |-  __iomap_dio_rw()
 |  |- iomap_iter()
 |  |  |- btrfs_dio_iomap_begin()
 |  |     Now an ordered extent is allocated for the 4K write.
 |  |
 |  |- iomi.status = iomap_dio_iter()
 |  |  Where iomap_dio_iter() returned -EFAULT.
 |  |
 |  |- ret = iomap_iter()
 |  |  |- btrfs_dio_iomap_end()
 |  |  |  |- btrfs_finish_ordered_extent(uptodate = false)
 |  |  |  |  |- can_finish_ordered_extent()
 |  |  |  |     |- btrfs_mark_ordered_extent_error()
 |  |  |  |        |- mapping_set_error()
 |  |  |  |           Now the address space is marked error.
 |  |  |  | return -ENOTBLK
 |  |  |- return -ENOTBLK
 |  |- if (ret == -ENOTBLK) { ret = 0; }
 |     Now the return value is reset to 0.
 |     Thus no error pointer will be returned.
 |
 |- ret = iomap_dio_complete()
 |  Since no byte is submitted, @ret is 0.
 |
 |- Fallback to buffered IO
 |  And the buffered write finished without error
 |
 |- filemap_fdatawait_range()

|- filemap_check_errors()
The previous error is recorded, thus an error is returned

However the buffered write is properly submitted and finished, the error is from the btrfs_finish_ordered_extent() call with @uptodate = false.

[FIX]
When a short dio write happened, any range that is submitted will have btrfs_extract_ordered_extent() to be called, thus the submitted range will always have an OE just covering the submitted range.

The remaining OE range is never submitted, thus they should be treated as truncated, not an error. So that we can properly reclaim and not insert an unnecessary file extent item, without marking the mapping as error.

Extract a helper, btrfs_mark_ordered_extent_truncated(), and utilize that helper to mark the direct IO ordered extent as truncated, so it won't cause failure for the later buffered fallback.

[REASON FOR NO FIXES TAG]
The bug itself is pretty old, at commit f85781fb505e ("btrfs: switch to iomap for direct IO") we're already passing @uptodate=false finishing the OE.
But at that time OE with IOERR won't call mapping_set_error(), so it's not exposed.
Later commit d61bec08b904 ("btrfs: mark ordered extent and inode with error if we fail to finish") finally exposed the bug, but that commit is doing a correct job, not the root cause.

Anyway the bug is very old, dating back to 5.1x days, thus only CC to stable.

Cc [email protected] # 5.15+

Signed-off-by Qu Wenruo <[email protected]>

---
 fs/btrfs/direct-io.c    | 17 ++++++++++++++---
 fs/btrfs/inode.c        |  6 +-----
 fs/btrfs/ordered-data.c | 12 ++++++++++++
 fs/btrfs/ordered-data.h |  2 ++
 4 files changed, 29 insertions(+), 8 deletions(-)

fs/btrfs/direct-io.c +14 -3

index 57167d56dc72..88cb2e82a507 100644
@@ -624,12 +624,23 @@ static int btrfs_dio_iomap_end(struct inode *inode, loff_t pos, loff_t length,
 	if (submitted < length) {
 		pos += submitted;
 		length -= submitted;
-		if (write)
+		if (write) {
+			/*
+			 * We have a short write, if there is any range
+			 * that is submitted properly, that part will have
+			 * its own OE split from the original one.
+			 *
+			 * So for the OE at dio_data->ordered, it's the part
+			 * that is not submitted, and should be marked
+			 * as fully truncated.
+			 */
+			btrfs_mark_ordered_extent_truncated(dio_data->ordered, 0);
 			btrfs_finish_ordered_extent(dio_data->ordered,
-						    pos, length, false);
-		else
+						    pos, length, true);
+		} else {
 			btrfs_unlock_dio_extent(&BTRFS_I(inode)->io_tree, pos,
 						pos + length - 1, NULL);
+		}
 		ret = -ENOTBLK;
 	}
 	if (write) {

fs/btrfs/inode.c +1 -5

index 973a89301baa..2c0131452754 100644
@@ -7590,11 +7590,7 @@ static void btrfs_invalidate_folio(struct folio *folio, size_t offset,
 					       EXTENT_LOCKED | EXTENT_DO_ACCOUNTING |
 					       EXTENT_DEFRAG, &cached_state);
 
-		spin_lock(&inode->ordered_tree_lock);
-		set_bit(BTRFS_ORDERED_TRUNCATED, &ordered->flags);
-		ordered->truncated_len = min(ordered->truncated_len,
-					     cur - ordered->file_offset);
-		spin_unlock(&inode->ordered_tree_lock);
+		btrfs_mark_ordered_extent_truncated(ordered, cur - ordered->file_offset);
 
 		/*
 		 * If the ordered extent has finished, we're safe to delete all

fs/btrfs/ordered-data.c +12 -0

index f5f77c33cf59..b32d4eabe0ab 100644
@@ -358,6 +358,18 @@ void btrfs_mark_ordered_extent_error(struct btrfs_ordered_extent *ordered)
 		mapping_set_error(ordered->inode->vfs_inode.i_mapping, -EIO);
 }
 
+void btrfs_mark_ordered_extent_truncated(struct btrfs_ordered_extent *ordered,
+					 u64 truncate_len)
+{
+	struct btrfs_inode *inode = ordered->inode;
+
+	ASSERT(truncate_len <= ordered->num_bytes);
+	spin_lock(&inode->ordered_tree_lock);
+	set_bit(BTRFS_ORDERED_TRUNCATED, &ordered->flags);
+	ordered->truncated_len = min(ordered->truncated_len, truncate_len);
+	spin_unlock(&inode->ordered_tree_lock);
+}
+
 static void finish_ordered_fn(struct btrfs_work *work)
 {
 	struct btrfs_ordered_extent *ordered_extent;

fs/btrfs/ordered-data.h +2 -0

index 03e12380a2fd..8d5d5ba1e02f 100644
@@ -226,6 +226,8 @@ bool btrfs_try_lock_ordered_range(struct btrfs_inode *inode, u64 start, u64 end,
 struct btrfs_ordered_extent *btrfs_split_ordered_extent(
 			struct btrfs_ordered_extent *ordered, u64 len);
 void btrfs_mark_ordered_extent_error(struct btrfs_ordered_extent *ordered);
+void btrfs_mark_ordered_extent_truncated(struct btrfs_ordered_extent *ordered,
+					 u64 truncate_len);
 int __init ordered_data_init(void);
 void __cold ordered_data_exit(void);
 

Signature · 1 line

2.54.0

Currently btrfs_direct_write() will not try to fault in the pages, but directly fall back to buffered writes, if the first page of the buffer can not be faulted in.

For example, during generic/362 with nodatasum mount option, there is a write at file offset 0, length PAGE_SIZE, and the page is not faulted in. Then we go the following callchain and directly fall back to buffered IO:

btrfs_direct_write()

 |- btrfs_dio_write()
 |-  __iomap_dio_rw()
 |  |- iomap_iter()
 |  |  |- btrfs_dio_iomap_begin()
 |  |     Now an ordered extent is allocated for the 4K write.
 |  |
 |  |- iomi.status = iomap_dio_iter()
 |  |  Where iomap_dio_iter() returned -EFAULT.
 |  |
 |  |- ret = iomap_iter()
 |  |  |- btrfs_dio_iomap_end()
 |  |  |  | return -ENOTBLK
 |  |  |- return -ENOTBLK
 |  |- if (ret == -ENOTBLK) { ret = 0; }
 |     Now the return value is reset to 0.
 |
 |- ret = iomap_dio_complete()
 |  Since no byte is submitted, @ret is now zero.
 |
 |- if (iov_iter_count() > 0 && (ret == -EFAULT || ret > 0))
 |  @ret is zero, thus not meeting the above retry condition
 |
 |- Fallback to buffered

Just slightly loosen the condition to allow retry faulting in pages after a zero sized short write.

Unlike the previous two bug fixes, this one is not really cause any real bug, but only reducing the chance to do zero-copy direct IO. Thus it doesn't really require stable-CC nor fixes-tag.

Signed-off-by Qu Wenruo <[email protected]>

---
 fs/btrfs/direct-io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

fs/btrfs/direct-io.c +1 -1

index fd53fac7186e..99c959be8de7 100644
@@ -960,7 +960,7 @@ ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from)
 	if (ret > 0)
 		written = ret;
 
-	if (iov_iter_count(from) > 0 && (ret == -EFAULT || ret > 0)) {
+	if (iov_iter_count(from) > 0 && (ret == -EFAULT || ret >= 0)) {
 		const size_t left = iov_iter_count(from);
 		/*
 		 * We have more data left to write. Try to fault in as many as

Signature · 1 line

2.54.0

On Sat, May 30, 2026 at 01:04:18PM +0930, Qu Wenruo wrote:

Quoted 23 lines

The call chain looks like this:

btrfs_direct_write(pos=0, length=4K)

  |- __iomap_dio_rw()
  |  |- iomap_iter()
  |  |  |- btrfs_dio_iomap_begin()
  |  |     |- btrfs_get_blocks_direct_write()
  |  |        |- i_size_write()
  |  |           Which updates the isize to the write end (4K).
  |  |
  |  |- iomap_dio_iter()
  |  |  Failed with -EFAULT on the first page.
  |  |
  |  |- iomap_iter()
  |  |  |- btrfs_dio_iomap_end()
  |  |     Detects a short write, return -ENOTBLK
  |  |- if (ret == -ENOTBLK) { ret = 0;}
  |     Which resets the return value.
  |
  |- ret = iomap_dio_complet()
  |  Which returns 0.
  |
  |- btrfs_buffered_write(iocb, from);

Quoted 5 lines

|- generic_write_checks()
|- iocb->ki_pos = i_size_read()
Which is still the new size (4K), other than the original
isize 0.

The explanation is very clear, so thank you for that. I agree with the bug and the direction of the fix.

However, I fear that there could still be a smaller bug left.

You have reasoned out a race against buffered writes, and the invalid i_size you are fixing up only exists inside the dio thread holding the inode lock, so the buffered write does not see it before you get to fixup i_size. However, after we set the invalid i_size we release the extent lock, so I believe a buffered reader could now observe the intermediate too-big i_size before you manage to fix it.

I believe that the consequence of this is that reader will block on the OE, then the split half will be finished/truncated, but the reader could still see the too-big i_size and get back zeroes. I am not completely sure if this is for sure a bug, but it does feel like it could be wrong.

For what it's worth, there is a comment at the i_size_write() in btrfs_get_blocks_direct_write() which also confirms that it is important that the update is done under the extent lock, not just the inode lock.

If it is, in fact, safe, then clarifying that in the existing comment and/or a new comment would be helpful, I think. The comment is from 2012:
c3473e830074 ("Btrfs: fix dio write vs buffered read race") so I suspect some of the original reasoning may now be out of date..

Thanks,
Boris