Skip to contentSkip to conversation

at91rm9200 cpu & STM29W320DB70N6 (32M) flash & u-boot 1.1.1

U-Boot-Users Josef Rendl 2 participants 2 messages Dec 14, 2004

lore
Share & tools
lore

Josef Rendl

author
#0 lore raw

Hi all,

I'm using an at91rm9200 cpu (not an at91rm9200dk board) with an STM29W320DB70N6 flash and u-boot 1.1.1
u-boot runs with the at91rm9200dk_config settings but flash is wrong (Bank # 1: Atmel: AT49BV1614 (16Mbit) Size: 2 MB in 40 Sectors ...) When I try to use:

        #define CFG_FLASH_CFI 1
        #define CFG_FLASH_CFI_DRIVER 1

u-boot starts but shows only "missing or unknown FLASH type" with flinfo

Is this type of flash not supported ? or is my configuration wrong ?

Best regards,

Josef Rendl

#1 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

I'm using an at91rm9200 cpu (not an at91rm9200dk board) with an STM29W320DB70N6 flash and u-boot 1.1.1

You risk wasting your time using old sources for current work. Please use the top of CVS version.

Quoted 8 lines

u-boot runs with the at91rm9200dk_config settings but flash is wrong (Bank # 1: Atmel: AT49BV1614 (16Mbit) Size: 2 MB in 40 Sectors ...) When I try to use:

        #define CFG_FLASH_CFI 1
        #define CFG_FLASH_CFI_DRIVER 1

u-boot starts but shows only "missing or unknown FLASH type" with flinfo

Is this type of flash not supported ? or is my configuration wrong ?

Yes.

[Did you really expoect another reply without giving any information about your hardware? Of course we can only guess in such a situation....]

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Those who hate and fight must stop themselves -- otherwise it is  not
stopped.
	-- Spock, "Day of the Dove", stardate unknown