Sparse LUN scanning - 2.4.x
Hi there,
We have an Apple Xserve RAID, connected through a FC switch. The RAID has LUN-masking enabled, such that one of our Linux boxes only gets LUN 1 and not LUN 0. We're running the 2.4.x kernel series now, since this is under a RHEL envinronment.
The problem is this: since LUN 0 does not show up -- specifically, it can't read the vendor or model informaton -- the kernel SCSI scan does not match with the table to tell the kernel to do sparse LUN scanning... so the RAID does not appear.
I can make the RAID show up by injecting a add-single-device to the SCSI proc layer. Trivially patching scsi_scan.c to always do sparse scanning works as well. No hokery with max_scsi_luns or ghost devices works.
I'm considering making a patch to add a kernel option to force sparse scanning. Is there a better way?
Thanks in advance,
--Jim
Signature · 3 lines
Jim Zajkowski OpenPGP 0x21135C3 http://www.jimz.net/pgp.asc System Administrator 8A9E 1DDF 944D 83C3 AEAB 8F74 8697 A823 2113 5C53 UM Life Sciences Institute
Quoted 10 lines · Jim Zajkowski
Hi there,
We have an Apple Xserve RAID, connected through a FC switch. The RAID has LUN-masking enabled, such that one of our Linux boxes only gets LUN 1 and not LUN 0. We're running the 2.4.x kernel series now, since this is under a RHEL envinronment.
The problem is this: since LUN 0 does not show up -- specifically, it can't read the vendor or model informaton -- the kernel SCSI scan does not match with the table to tell the kernel to do sparse LUN scanning... so the RAID does not appear.
I can make the RAID show up by injecting a add-single-device to the SCSI proc layer. Trivially patching
scsi_scan.cto always do sparse scanning works as well. No hokery withmax_scsi_lunsor ghost devices works.I'm considering making a patch to add a kernel option to force sparse scanning. Is there a better way?
Add the Xserve with the BLIST_SPARSELUN flag into the blacklist/quirks table in drivers/scsi/scsi_scan.c
~mc
Quoted 3 lines · Michael Clark
Quoted 1 line
The problem is this: since LUN 0 does not show up -- specifically, it can't read the vendor or model informaton -- the kernel SCSI scan does not match with the table to tell the kernel to do sparse LUN scanning... so the RAID does not appear.
Add the Xserve with the
BLIST_SPARSELUNflag into the blacklist/quirks table indrivers/scsi/scsi_scan.c
It already is in the quirks list.
The problem is that LUN 0 does not show up on this machine, so the quirks table doesn't work. Looking at /proc/scsi/scsi shows the device but only sorta:
Quoted 3 lines
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Model: Rev:
Type: Processor ANSI SCSI revision: ffffffff
whereas the LUN that is mapped shows up like this:
Quoted 3 lines
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: APPLE Model: Xserve RAID Rev: 1.20
Type: Direct-Access ANSI SCSI revision: 02
So since the information doesn't show up, the quirks table magic doesn't work since it doesn't know that it needs to do a sparse lun scan.
--Jim
Signature · 3 lines
Jim Zajkowski OpenPGP 0x21135C3 http://www.jimz.net/pgp.asc System Administrator 8A9E 1DDF 944D 83C3 AEAB 8F74 8697 A823 2113 5C53 UM Life Sciences Institute
Quoted 5 lines · Jim Zajkowski
Quoted 2 lines · Michael Clark
Quoted 1 line
The problem is this: since LUN 0 does not show up -- specifically, it can't read the vendor or model informaton -- the kernel SCSI scan does not match with the table to tell the kernel to do sparse LUN scanning... so the RAID does not appear.
Quoted 7 lines
Quoted 1 line
Add the Xserve with the
BLIST_SPARSELUNflag into the blacklist/quirks table indrivers/scsi/scsi_scan.cIt already is in the quirks list.
The problem is that LUN 0 does not show up on this machine, so the quirks table doesn't work. Looking at
/proc/scsi/scsishows the device but only sorta:
Okay. I believe there is a patch floating around for 2.4 that is used in some of the other distro's kernels that adds REPORT LUNS scanning as well as a flag to force LUN scanning (although not sure it works if LUN 0 is not present).
A pragmatic solution may be to just add the echo scsi add-single-device x x x x > /proc/scsi/scsi into your early boot or configure one of your slices on LUN 0 (if the Xserve RAID allows that). 2.6 (and RHEL 4) support the REPORT LUNS so should work there although there are some messages on linux-scsi about the Xserve RAID's specific handling of LUN 0. Probably good idea to post to linux-scsi.
~mc