Skip to contentSkip to conversation

problem decoding Link_Policy_Settings parameter

Bluez-users soraberri 2 participants 2 messages Jan 27, 2005 – Jan 28, 2005 Bluetooth drivers

lore
Share & tools
lore

soraberri

author
#0 lore raw

Hi, how are you there?
I hope you could help me with this stoping problem:

let's say I do 'hcitool cc --role=m 00:10:60:A5:8F:8A' and now, the output in hcidump is the following:

< HCI Command: Create Connection (0x01|0x0005) plen 13
8A 8F A5 60 10 00 18 CC 02 00 00 00 00

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

00 01 05 04

Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

00 29 00 8A 8F A5 60 10 00 01 00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
29 00 0F 00

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6

01 0D 08 00 29 00

Quoted 1 line

HCI Event: Page Scan Repetition Mode Change (0x20) plen 7

8A 8F A5 60 10 00 01

Quoted 1 line

HCI Event: Max Slots Change (0x1b) plen 3

29 00 05

My problem is I cannot render an interpretation of the Write Link Policy Settings Command, because I read 0x000F as the Link_Policy_Settings parameter, and by looking at the bluetooth specification this value is not allowed (or at least it is not defined), so what a strange way of telling the device to stay master!

thanks all (especially Marcel cause none post of mine has miss one of his answers)

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi,

Quoted 18 lines

I hope you could help me with this stoping problem:

let's say I do 'hcitool cc --role=m 00:10:60:A5:8F:8A' and now, the output in hcidump is the following:

< HCI Command: Create Connection (0x01|0x0005) plen 13
8A 8F A5 60 10 00 18 CC 02 00 00 00 00

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

00 01 05 04

Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

00 29 00 8A 8F A5 60 10 00 01 00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
29 00 0F 00

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6

01 0D 08 00 29 00

Quoted 1 line

HCI Event: Page Scan Repetition Mode Change (0x20) plen 7

8A 8F A5 60 10 00 01

Quoted 1 line

HCI Event: Max Slots Change (0x1b) plen 3

Quoted 8 lines

29 00 05

My problem is I cannot render an interpretation of the Write Link Policy Settings Command, because I read 0x000F as the Link_Policy_Settings parameter, and by looking at the bluetooth specification this value is not allowed (or at least it is not defined), so what a strange way of telling the device to stay master!

the connection handle is 41 and the link policy is 15. This means that role switch, hold mode, sniff mode and park state are enabled. The math is quite simple:

	1 + 2 + 4 + 8 = 15

The link policy is a bit oriented value.

Quoted 2 lines

thanks all (especially Marcel cause none post of mine has miss one of his answers)

You are welcome.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users