customized IOCTL in pcm platform driver.
Hi All,
will ALSA framework provide any customized IOCTL functionality in PCM platform driver.
in my system there is a requirement to get some information from DSP to user space and I am thinking to add IOCTL's, is there any method to accommodate or how we can address this issue?
Regards,
Santosh
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 5 lines · [email protected] wrote:
Hi All,
will ALSA framework provide any customized IOCTL functionality in PCM platform driver.
No.
Quoted 3 lines
in my system there is a requirement to get some information from DSP to user space and I am thinking to add IOCTL's, is there any method to accommodate or how we can address this issue?
You can use hwdep device for any extra methods.
Takashi
Quoted 8 lines
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 5 lines · [email protected] wrote:
Hi All,
will ALSA framework provide any customized IOCTL functionality in PCM platform driver.
Quoted 7 lines
No.
Quoted 3 lines
in my system there is a requirement to get some information from DSP to user space and I am thinking to add IOCTL's, is there any method to accommodate or how we can address this issue?
You can use hwdep device for any extra methods.
We need to tie this ioctl with the on going DSP session which will be difficult When used with hwdep interface.
Quoted 4 lines
Takashi
At Mon, 8 Oct 2012 23:44:40 -0700 (PDT),
Quoted 11 lines · [email protected] wrote:
Quoted 11 lines
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 5 lines · [email protected] wrote:
Hi All,
will ALSA framework provide any customized IOCTL functionality in PCM platform driver.
No.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
in my system there is a requirement to get some information from DSP to user space and I am thinking to add IOCTL's, is there any method to accommodate or how we can address this issue?
You can use hwdep device for any extra methods.
We need to tie this ioctl with the on going DSP session which will be difficult When used with hwdep interface.
Hm, how can it be difficult? More specific description is needed to answer more.
Takashi
Quoted 18 lines
At Mon, 8 Oct 2012 23:44:40 -0700 (PDT),
Quoted 16 lines · [email protected] wrote:
Quoted 4 lines
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 1 line · [email protected] wrote:
Quoted 8 lines
Quoted 4 lines
Hi All,
will ALSA framework provide any customized IOCTL functionality in PCM platform driver.
No.
Quoted 1 line
in my system there is a requirement to get some information from DSP
to
Quoted 3 lines
Quoted 2 lines
user space and I am thinking to add IOCTL's, is there any method to accommodate or how we can address this issue?
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
You can use hwdep device for any extra methods.
We need to tie this ioctl with the on going DSP session which will be difficult When used with hwdep interface.
Hm, how can it be difficult? More specific description is needed to answer more.
to communicate with DSP we open up a session and populate that information in the substream, for this use case during the playback session user space has to talk to DSP to get some information like time stamp also the time stamp statistics, to talk to DSP I need to get hold of the proper substream so that the communication with particular session is possible.
I see adding one IOCTL in the platform driver will solve my issue, but not finding any way to integrate this in the current framework,
if we use the hwdep, not sure how can I get hold of the substream handle so I can talk to particular session in DSP.
DSP can support multiple sessions playback even in this case we need to talk to DSP but the DSP session information will be the part of substream, I need to get hold of proper substream handle to talk to particular DSP session.
let me know can we handle this?
Quoted 8 lines
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Tue, 9 Oct 2012 00:30:40 -0700 (PDT),
Quoted 33 lines · [email protected] wrote:
Quoted 19 lines
At Mon, 8 Oct 2012 23:44:40 -0700 (PDT),
Quoted 16 lines · [email protected] wrote:
Quoted 4 lines
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 1 line · [email protected] wrote:
Quoted 8 lines
Quoted 4 lines
Hi All,
will ALSA framework provide any customized IOCTL functionality in PCM platform driver.
No.
Quoted 1 line
in my system there is a requirement to get some information from DSP
to
Quoted 3 lines
Quoted 2 lines
user space and I am thinking to add IOCTL's, is there any method to accommodate or how we can address this issue?
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
You can use hwdep device for any extra methods.
We need to tie this ioctl with the on going DSP session which will be difficult When used with hwdep interface.
Hm, how can it be difficult? More specific description is needed to answer more.
to communicate with DSP we open up a session and populate that information in the substream, for this use case during the playback session user space has to talk to DSP to get some information like time stamp also the time stamp statistics, to talk to DSP I need to get hold of the proper substream so that the communication with particular session is possible.
Quoted 5 lines
I see adding one IOCTL in the platform driver will solve my issue, but not finding any way to integrate this in the current framework,
if we use the hwdep, not sure how can I get hold of the substream handle so I can talk to particular session in DSP.
A PCM substream can be identified simply by a PCM device number and a PCM substream index. You can make ioctl to pass these information.
Takashi
Quoted 44 lines
At Tue, 9 Oct 2012 00:30:40 -0700 (PDT),
Quoted 42 lines · [email protected] wrote:
Quoted 10 lines
At Mon, 8 Oct 2012 23:44:40 -0700 (PDT),
Quoted 7 lines · [email protected] wrote:
Quoted 7 lines
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 4 lines · [email protected] wrote:
Hi All,
will ALSA framework provide any customized IOCTL functionality in
PCM
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
platform driver.
No.
Quoted 1 line
in my system there is a requirement to get some information from
DSP
Quoted 2 lines
Quoted 2 lines
to
Quoted 1 line
Quoted 1 line
user space and I am thinking to add IOCTL's, is there any method
to
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
accommodate or how we can address this issue?
You can use hwdep device for any extra methods.
We need to tie this ioctl with the on going DSP session which will be difficult When used with hwdep interface.
Hm, how can it be difficult? More specific description is needed to answer more.
to communicate with DSP we open up a session and populate that information
in the substream, for this use case during the playback session user space
has to talk to DSP to get some information like time stamp also the time stamp statistics, to talk to DSP I need to get hold of the proper substream so that the communication with particular session is possible.I see adding one IOCTL in the platform driver will solve my issue, but not
finding any way to integrate this in the current framework,
Quoted 6 lines
Quoted 2 lines
if we use the hwdep, not sure how can I get hold of the substream handle so I can talk to particular session in DSP.
A PCM substream can be identified simply by a PCM device number and a PCM substream index. You can make ioctl to pass these information.
Can you point to any code reference doing this operation? did you mean accessing the sub-stream handle in user space or in the kernel driver.
Quoted 3 lines
Takashi
At Tue, 9 Oct 2012 01:01:42 -0700 (PDT),
Quoted 45 lines · [email protected] wrote:
Quoted 45 lines
At Tue, 9 Oct 2012 00:30:40 -0700 (PDT),
Quoted 42 lines · [email protected] wrote:
Quoted 10 lines
At Mon, 8 Oct 2012 23:44:40 -0700 (PDT),
Quoted 7 lines · [email protected] wrote:
Quoted 7 lines
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 4 lines · [email protected] wrote:
Hi All,
will ALSA framework provide any customized IOCTL functionality in
PCM
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
platform driver.
No.
Quoted 1 line
in my system there is a requirement to get some information from
DSP
Quoted 2 lines
Quoted 2 lines
to
Quoted 1 line
Quoted 1 line
user space and I am thinking to add IOCTL's, is there any method
to
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
accommodate or how we can address this issue?
You can use hwdep device for any extra methods.
We need to tie this ioctl with the on going DSP session which will be difficult When used with hwdep interface.
Hm, how can it be difficult? More specific description is needed to answer more.
to communicate with DSP we open up a session and populate that information
in the substream, for this use case during the playback session user space
has to talk to DSP to get some information like time stamp also the time stamp statistics, to talk to DSP I need to get hold of the proper substream so that the communication with particular session is possible.I see adding one IOCTL in the platform driver will solve my issue, but not
finding any way to integrate this in the current framework,
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
if we use the hwdep, not sure how can I get hold of the substream handle so I can talk to particular session in DSP.
A PCM substream can be identified simply by a PCM device number and a PCM substream index. You can make ioctl to pass these information.
Can you point to any code reference doing this operation?
What operation do you mean? It's just a look up of PCM instance...
Quoted 2 lines
did you mean accessing the sub-stream handle in user space or in the kernel driver.
In the kernel side, you can look through the list of PCM subdevice and find out the matching snd_pcm_substream instance from the given subdevice index.
That is, keep PCM handles in your driver data, and look through it.
struct snd_pcm_substream *find_my_substream()
{
for (i = 0; i < chip->my_pcms; i++) {
if (chip->pcms[i]->device == this_pcm_device) {
pcm = chip->pcms[i];
break;
}
}
if (!pcm)
return NULL;
for (s = pcm->streams[dir].substream; s; s = s->next)
if (s->number == this_substream_number) {
return s;
return NULL;
}Then in a struct passed to ioctl, you can add two fields
struct my_ioctl {
unsigned int pcm_device;
unsigned int pcm_subdevice;
unsigned int more_data_blah;
...
};int handle_my_ioctl(chip, arg)
{
struct my_ioctl data;
if (copy_from_user(&data, arg, sizeof(data)))
return -EFAULT;
s = find_my_substream(chip, data.pcm_device,
data.pcm_subdevice);
if (!s)
return -EINVAL;
handle_subdevice(s, &data);
if (copy_to_user(arg, &data, sizeof(data)))
return -EFAULT;
return 0;
}Takashi
Quoted 51 lines
Quoted 51 lines
At Tue, 9 Oct 2012 00:30:40 -0700 (PDT),
Quoted 48 lines · [email protected] wrote:
Quoted 10 lines
At Mon, 8 Oct 2012 23:44:40 -0700 (PDT),
Quoted 7 lines · [email protected] wrote:
Quoted 7 lines
At Mon, 8 Oct 2012 23:30:09 -0700 (PDT),
Quoted 4 lines · [email protected] wrote:
Hi All,
will ALSA framework provide any customized IOCTL functionality in
PCM
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
platform driver.
No.
Quoted 1 line
in my system there is a requirement to get some information from
DSP
Quoted 2 lines
Quoted 2 lines
to
Quoted 1 line
Quoted 1 line
user space and I am thinking to add IOCTL's, is there any method
to
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
accommodate or how we can address this issue?
You can use hwdep device for any extra methods.
We need to tie this ioctl with the on going DSP session which will
be
Quoted 4 lines
Quoted 1 line
difficult When used with hwdep interface.
Hm, how can it be difficult? More specific description is needed to answer more.
to communicate with DSP we open up a session and populate that information
in the substream, for this use case during the playback session user space
has to talk to DSP to get some information like time stamp also the time
stamp statistics, to talk to DSP I need to get hold of the proper substream so that the communication with particular session is possible.I see adding one IOCTL in the platform driver will solve my issue, but not
finding any way to integrate this in the current framework,if we use the hwdep, not sure how can I get hold of the substream handle
so I can talk to particular session in DSP.
Quoted 14 lines
Quoted 3 lines
A PCM substream can be identified simply by a PCM device number and a PCM substream index. You can make ioctl to pass these information.
Can you point to any code reference doing this operation? did you mean accessing the sub-stream handle in user space or in the kernel driver.
Quoted 3 lines
Takashi
thanks for the information Takashi, but I have new requirement, want to see how can I implement a asynchronous functionality using dependent hardware interface,
consider a use case where the DSP responds with proprietary data tied up with session opened, now the data received at app has to be propagated to user space
for further processing, does any one implemented this in hardware dependent interface layer.