Which debugger for u-boot?
I'm looking for a debugger interface for debugging u-boot on a MPC8540. I only need to debug u-boot not Linux.
Can the Macraigor USBdemon do the job or do I need to buy the much more expensive BDI2000?
Any suggestion would help me.
Thanks,
Armand
Quoted 2 lines · In message <[email protected]> you wrote:
I'm looking for a debugger interface for debugging u-boot on a MPC8540. I only need to debug u-boot not Linux.
This is today. What will you need tomorrow?
Quoted 2 lines
Can the Macraigor USBdemon do the job or do I need to buy the much more expensive BDI2000?
My recommendation is: use the BDI2000.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Concept, n.: Any "idea" for which an outside consultant billed you more than $25,000.
We are using the QNX OS in our projects, and really just need to debug the bootloader. The real question is what the BDI2000 offer compared to the Macraigor USBdemon. I'm sure the BDI2000 is better but If we can debug the boot loader and program a blank Flash with the USBdemon, it's enough! If it's not a good tool we will lost money buying it so ...
Quoted 19 lines · Wolfgang Denk
Quoted 2 lines · In message <[email protected]> you wrote:
I'm looking for a debugger interface for debugging u-boot on a MPC8540. I only need to debug u-boot not Linux.
This is today. What will you need tomorrow?
Quoted 2 lines
Can the Macraigor USBdemon do the job or do I need to buy the much more expensive BDI2000?
My recommendation is: use the BDI2000.
Best regards,
Wolfgang Denk