Skip to contentSkip to conversation

How do I remove/disable QtWebKit from building?

DISCUSSION Anatoli Veselinov 2 participants 2 messages Nov 2, 2016 – Nov 3, 2016

lore
Share & tools
lore
#0 lore raw

I have been searching about this but didn't found anything. I don't know if what I'm asking is possible so let me explain.

My goal is to create a custom image for a target that it can run Qt applications.
I have the image ready, I also generated the Qt sdk (with populate_sdk) and I already can cross-compile. Ok.

My question is, for future builds, how do I disable or remove some Qt modules that I don't need?

I did:

PACKAGECONFIG_remove_pn-qttools = "qtwebkit"
PACKAGECONFIG_remove_pn-qtquick1 = "qtwebkit"

but that doesn't disable qtwebkit to be built, I saw qtwebkit do_compile task running and it takes a lot of time.

#1 lore raw
Quoted 8 lines · Anatoli Veselinov

I have been searching about this but didn't found anything. I don't know if what I'm asking is possible so let me explain.

My goal is to create a custom image for a target that it can run Qt applications.
I have the image ready, I also generated the Qt sdk (with populate_sdk) and I already can cross-compile. Ok.

Quoted 8 lines

My question is, for future builds, how do I disable or remove some Qt modules that I don't need?

I did:

PACKAGECONFIG_remove_pn-qttools = "qtwebkit"
PACKAGECONFIG_remove_pn-qtquick1 = "qtwebkit"

but that doesn't disable qtwebkit to be built, I saw qtwebkit do_compile task running and it takes a lot of time.

you need to remove it from qtbase as well.

Quoted 5 lines

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto