riscv: Add option to print registers on exception
PATCH 1/1 riscv: Add option to print registers on exception
When debugging, it can be helpful to see more information about an unhandled exception. This patch adds an option to view the registers at the time of the trap, similar to the linux output on a kernel panic.
--- arch/riscv/Kconfig | 3 +++ arch/riscv/cpu/mtrap.S | 3 ++- arch/riscv/lib/interrupts.c | 50 +++++++++++++++++++++++++++++-------- 3 files changed, 44 insertions(+), 12 deletions(-)
arch/riscv/Kconfig +3 -0
@@ -222,6 +222,9 @@ config XIP from a NOR flash memory without copying the code to ram. Say yes here if U-Boot boots from flash directly. +config SHOW_REGS + bool "Show registers on unhandled exception" + config STACK_SIZE_SHIFT int default 14
arch/riscv/cpu/mtrap.S +2 -1
@@ -64,7 +64,8 @@ trap_entry: SREG x31, 31 * REGBYTES(sp) csrr a0, MODE_PREFIX(cause) csrr a1, MODE_PREFIX(epc) - mv a2, sp + csrr a2, MODE_PREFIX(tval) + mv a3, sp jal handle_trap csrw MODE_PREFIX(epc), a0
arch/riscv/lib/interrupts.c +39 -11
84 lines not on this page · raw message
Signature · 1 line
2.23.0
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 riscv: Add option to print registers on exception
Hi Sean
Quoted 93 lines
From: Sean Anderson [mailto:seanga2 at gmail.com]
Sent: Wednesday, December 18, 2019 10:32 AM
To: u-boot at lists.denx.de
Cc: Rick Jian-Zhi Chen(陳建志)
Subject: [PATCH] riscv: Add option to print registers on exceptionWhen debugging, it can be helpful to see more information about an unhandled exception. This patch adds an option to view the registers at the time of the trap, similar to the linux output on a kernel panic.
Signed-off-by Sean Anderson <[email protected]>--- arch/riscv/Kconfig | 3 +++ arch/riscv/cpu/mtrap.S | 3 ++- arch/riscv/lib/interrupts.c | 50 +++++++++++++++++++++++++++++-------- 3 files changed, 44 insertions(+), 12 deletions(-)arch/riscv/Kconfig +3
-0@@ -222,6 +222,9 @@ config XIP from a NOR flash memory without copying the code to ram. Say yes here if U-Boot boots from flash directly. +config SHOW_REGS + bool "Show registers on unhandled exception" + config STACK_SIZE_SHIFT int default 14arch/riscv/cpu/mtrap.S +2
-1@@ -64,7 +64,8 @@ trap_entry: SREG x31, 31 * REGBYTES(sp) csrr a0, MODE_PREFIX(cause) csrr a1, MODE_PREFIX(epc) - mv a2, sp + csrr a2, MODE_PREFIX(tval) + mv a3, sp jal handle_trap csrw MODE_PREFIX(epc), a0arch/riscv/lib/interrupts.c +27
-4@@ -5,6 +5,8 @@* * Copyright (C) 2017 Andes Technology Corporation * Rick Chen, Andes Technology Corporation <[email protected]> +* +* Copyright (C) 2019 Sean Anderson <[email protected]> */ #include <common.h> @@ -13,7 +15,34 @@#include <asm/system.h> #include <asm/encoding.h> -static void _exit_trap (ulong code,ulong epc,struct pt_regs *regs) +static void show_regs (struct pt_regs *regs) {#ifdef CONFIG_SHOW_REGS +printf ("RA: " REG_FMT " SP: " REG_FMT " GP: " REG_FMT "\n" , + regs->ra, regs->sp, regs->gp); +printf ("TP: " REG_FMT " T0: " REG_FMT " T1: " REG_FMT "\n" , + regs->tp, regs->t0, regs->t1); +printf ("T2: " REG_FMT " S0: " REG_FMT " S1: " REG_FMT "\n" , + regs->t2, regs->s0, regs->s1); +printf ("A0: " REG_FMT " A1: " REG_FMT " A2: " REG_FMT "\n" , + regs->a0, regs->a1, regs->a2); +printf ("A3: " REG_FMT " A4: " REG_FMT " A5: " REG_FMT "\n" , + regs->a3, regs->a4, regs->a5); +printf ("A6: " REG_FMT " A7: " REG_FMT " S2: " REG_FMT "\n" , + regs->a6, regs->a7, regs->s2); +printf ("S3: " REG_FMT " S4: " REG_FMT " S5: " REG_FMT "\n" , + regs->s3, regs->s4, regs->s5); +printf ("S6: " REG_FMT " S7: " REG_FMT " S8: " REG_FMT "\n" , + regs->s6, regs->s7, regs->s8); +printf ("S9: " REG_FMT " S10: " REG_FMT " S11: " REG_FMT "\n" , + regs->s9, regs->s10, regs->s11); +printf ("T3: " REG_FMT " T4: " REG_FMT " T5: " REG_FMT "\n" , + regs->t3, regs->t4, regs->t5); +printf ("T6: " REG_FMT "\n" , regs->t6);#endif } + +static void _exit_trap (ulong code,ulong epc,ulong tval,struct +pt_regs *regs) {static const char *const exception_code[] = {"Instruction address misaligned" ,@@ -34,14 +63,13 @@ static void _exit_trap(ulong code, ulong epc, struct pt_regs *regs) "Store/AMO page fault", }; -if (code <ARRAY_SIZE (exception_code)) { -printf ("exception code: %ld , %s , epc %lx , ra %lx\n" , - code, exception_code[code], epc, regs->ra);
arch/riscv/lib/interrupts.c static void _exit_trap(ulong code, ulong epc, struct pt_regs *regs) · line 71
Quoted 10 lines
arch/riscv/lib/interrupts.c +5
-4- }else { -printf ("reserved exception code: %ld , epc %lx , ra %lx\n" , - code, epc, regs->ra); - } +if (code <ARRAY_SIZE (exception_code)) +printf ("Unhandled exception: %s\n" , exception_code[code]); +else +printf ("Unhandled exception code: %ld\n" , code); +printf ("PC: " REG_FMT " TVAL: " REG_FMT "\n" , epc, tval);
Please modify PC as EPC.
LGTM.
Other than that,
Thanks
Rick
Quoted 31 lines
arch/riscv/lib/interrupts.c +5
-4+show_regs (regs);hang (); }@@ -65,7 +93,7 @@ int disable_interrupts(void)return 0 ; } -ulong handle_trap (ulong cause,ulong epc,struct pt_regs *regs) +ulong handle_trap (ulong cause,ulong epc,ulong tval,struct pt_regs +*regs) {ulong is_irq, irq;@@ -83,11 +111,11 @@ ulong handle_trap(ulong cause, ulong epc, struct pt_regs *regs)timer_interrupt (0 );/* handle timer interrupt */ break ;default : -_exit_trap (cause, epc, regs); +_exit_trap (cause, epc, tval, regs);break ; }; }else { -_exit_trap (cause, epc, regs); +_exit_trap (cause, epc, tval, regs); }return epc; --2.23.0