Skip to contentSkip to conversation

I confused about diff(simple question)

DISCUSSION guorke 3 participants 4 messages Jul 10, 2005

lore
Share & tools
lore

guorke

author
#0 lore raw

like:

/*
@@ -220,9 +232,8(HERE: why not -220,9 +220,8) @@ fastcall notrace void do_page_fault(stru

       struct vm_area_struct * vma;
       unsigned long address;
       unsigned long page;

- int write;
- siginfo_t info;
-
+ int write, si_code;
+

       /* get the address */
       __asm__("movl %%cr2,%0":"=r" (address));
       trace_special(regs->eip, error_code, address);

@@ -236,7 +247,7 (HERE: why not -236,7,+236,7) @@ fastcall notrace void do_page_fault(stru

       tsk = current;

- info.si_code = SEGV_MAPERR;
+ si_code = SEGV_MAPERR;

/*
* We fault-in kernel-space virtual memory on-demand. The
@@ -316,7 +327,7 (HERE -316,7, +316,7) @@ fastcall notrace void do_page_fault(stru
* we can handle it..
*/
good_area:
- info.si_code = SEGV_ACCERR;

+       si_code = SEGV_ACCERR;
       write = 0;
       switch (error_code & 3) {
               default:        /* 3: write, present */
@@ -390,11 +401,7 (HERE:why not -390,11,+390,11) @@ bad_area_nosemaphore:
               /* Kernel addresses are always protection faults */
               tsk->thread.error_code = error_code | (address >= TASK_SIZE);
               tsk->thread.trap_no = 14;
-               info.si_signo = SIGSEGV;
-               info.si_errno = 0;
-               /* info.si_code has been set above */
-               info.si_addr = (void __user *)address;
-               force_sig_info(SIGSEGV, &info, tsk);
+               force_sig_info_fault(SIGSEGV, si_code, address, tsk);
               return;
       }

@@ -500,11 +507,7(HERE: why not -500,11,+500,7) @@ do_sigbus:

       tsk->thread.cr2 = address;
       tsk->thread.error_code = error_code;
       tsk->thread.trap_no = 14;
-       info.si_signo = SIGBUS;
-       info.si_errno = 0;
-       info.si_code = BUS_ADRERR;
-       info.si_addr = (void __user *)address;
-       force_sig_info(SIGBUS, &info, tsk);
+       force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
       return;

...

in :-220,9 +232,8
I think the old file from the line 220,and have 9 lines,then the
newfile have 8 lines
so must delete one line. but why +232,it from the line 232 ? like this..

maybe it's very very simple.but i really confused it.wishes helps,

Thanks

--------
guorke

author
#1 lore raw
Quoted 76 lines · guorke

like:

/*
@@ -220,9 +232,8(HERE: why not -220,9 +220,8) @@ fastcall notrace void do_page_fault(stru

      struct vm_area_struct * vma;
      unsigned long address;
      unsigned long page;
(quoted diff) +2 -3
-       int write;
-       siginfo_t info;
-
+       int write, si_code;
+
      /* get the address */
      __asm__("movl %%cr2,%0":"=r" (address));
      trace_special(regs->eip, error_code, address);

@@ -236,7 +247,7 (HERE: why not -236,7,+236,7) @@ fastcall notrace void do_page_fault(stru

      tsk = current;
(quoted diff) +1 -1
-       info.si_code = SEGV_MAPERR;
+       si_code = SEGV_MAPERR;
 
      /*
       * We fault-in kernel-space virtual memory on-demand. The

@@ -316,7 +327,7 (HERE -316,7, +316,7) @@ fastcall notrace void do_page_fault(stru
* we can handle it..
*/
good_area:

(quoted diff) +1 -1
-       info.si_code = SEGV_ACCERR;
+       si_code = SEGV_ACCERR;
      write = 0;
      switch (error_code & 3) {
              default:        /* 3: write, present */

@@ -390,11 +401,7 (HERE:why not -390,11,+390,11) @@ bad_area_nosemaphore:

              /* Kernel addresses are always protection faults */
              tsk->thread.error_code = error_code | (address >= TASK_SIZE);
              tsk->thread.trap_no = 14;
(quoted diff) +1 -5
-               info.si_signo = SIGSEGV;
-               info.si_errno = 0;
-               /* info.si_code has been set above */
-               info.si_addr = (void __user *)address;
-               force_sig_info(SIGSEGV, &info, tsk);
+               force_sig_info_fault(SIGSEGV, si_code, address, tsk);
              return;
      }

@@ -500,11 +507,7(HERE: why not -500,11,+500,7) @@ do_sigbus:

      tsk->thread.cr2 = address;
      tsk->thread.error_code = error_code;
      tsk->thread.trap_no = 14;
(quoted diff) +1 -5
-       info.si_signo = SIGBUS;
-       info.si_errno = 0;
-       info.si_code = BUS_ADRERR;
-       info.si_addr = (void __user *)address;
-       force_sig_info(SIGBUS, &info, tsk);
+       force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
      return;
 
...

in :-220,9 +232,8
I think the old file from the line 220,and have 9 lines,then the
newfile have 8 lines
so must delete one line. but why +232,it from the line 232 ? like this..

maybe it's very very simple.but i really confused it.wishes helps,

Thanks

--------
guorke

#2 lore raw
In reply to guorke

On Sun, 10 Jul 2005 13:41:40 +0800 guorke wrote:

| like:
| 
|  /*
| @@ -220,9 +232,8(HERE: why not -220,9 +220,8) @@ fastcall notrace void
| do_page_fault(stru
|        struct vm_area_struct * vma;
|        unsigned long address;
|        unsigned long page;
| -       int write;
| -       siginfo_t info;
| -
| +       int write, si_code;
| +
|        /* get the address */
|        __asm__("movl %%cr2,%0":"=r" (address));
|        trace_special(regs->eip, error_code, address);
| @@ -236,7 +247,7 (HERE: why not -236,7,+236,7) @@ fastcall notrace
| void do_page_fault(stru
| 
|        tsk = current;
| 
| -       info.si_code = SEGV_MAPERR;
| +       si_code = SEGV_MAPERR;
| 
|        /*
|         * We fault-in kernel-space virtual memory on-demand. The
| @@ -316,7 +327,7 (HERE -316,7, +316,7) @@ fastcall notrace void
| do_page_fault(stru
|  * we can handle it..
|  */
|  good_area:
| -       info.si_code = SEGV_ACCERR;
| +       si_code = SEGV_ACCERR;
|        write = 0;
|        switch (error_code & 3) {
|                default:        /* 3: write, present */
| @@ -390,11 +401,7 (HERE:why not -390,11,+390,11) @@ bad_area_nosemaphore:
|                /* Kernel addresses are always protection faults */
|                tsk->thread.error_code = error_code | (address >= TASK_SIZE);
|                tsk->thread.trap_no = 14;
| -               info.si_signo = SIGSEGV;
| -               info.si_errno = 0;
| -               /* info.si_code has been set above */
| -               info.si_addr = (void __user *)address;
| -               force_sig_info(SIGSEGV, &info, tsk);
| +               force_sig_info_fault(SIGSEGV, si_code, address, tsk);
|                return;
|        }
| 
| @@ -500,11 +507,7(HERE: why not -500,11,+500,7) @@ do_sigbus:
|        tsk->thread.cr2 = address;
|        tsk->thread.error_code = error_code;
|        tsk->thread.trap_no = 14;
| -       info.si_signo = SIGBUS;
| -       info.si_errno = 0;
| -       info.si_code = BUS_ADRERR;
| -       info.si_addr = (void __user *)address;
| -       force_sig_info(SIGBUS, &info, tsk);
| +       force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
|        return;
| 
| ...
| 
| in :-220,9 +232,8
|  I think the old file from the line 220,and have 9 lines,then the
| newfile have 8 lines
| so must delete one line. but why +232,it from the line 232 ?

That patch segment begins at line 232 in the new file because the previous patch segments added 12 lines (232 - 220).

Now, were there some previous patch segments (that you omitted) or not? If not, it is confusing...

| like this..
| 
| maybe it's very very simple.but i really confused it.wishes helps,

---
~Randy

#3 lore raw
In reply to guorke
Quoted 13 lines · guorke

like:

/*
@@ -220,9 +232,8(HERE: why not -220,9 +220,8) @@ fastcall notrace void do_page_fault(stru

       struct vm_area_struct * vma;
       unsigned long address;
       unsigned long page;
(quoted diff) +2 -3
-       int write;
-       siginfo_t info;
-
+       int write, si_code;
+

(...)

Quoted 4 lines

I think the old file from the line 220,and have 9 lines,then the
newfile have 8 lines
so must delete one line. but why +232,it from the line 232 ? like this..

because there was another chunk before this one, which added 12 lines, so the offset in the old file is 220, and the offset in the new file is 232 because of the previous chunk.

Willy