Skip to contentSkip to conversation

usb & udev

DISCUSSION Alemao 2 participants 2 messages Aug 20, 2007

lore
Share & tools
lore

Alemao

author
#0 lore raw

Hi all,

When I plug my board with the FT232R chip from FTDI (USB to serial) a module named usbserial.ko and ftdi_sio.ko is inserted automatically.

I saw in udev rules that this is the line responsible for doing that:

# Load drivers that match kernel-supplied alias
ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe -Q $env{MODALIAS}"

What I want to know is who send this for udev? usbcore module?

The variable $env{MODALIAS} is something like this:

                 usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF

v0403 is the vendor ID, p6001 is the product ID, but the others? I didnt find anything about this in modprobe or udev docs....

Thanks,

Signature · 1 line
Alemao
#1 lore raw
Quoted 9 lines · Alemao

When I plug my board with the FT232R chip from FTDI (USB to serial) a module named usbserial.ko and ftdi_sio.ko is inserted automatically.

I saw in udev rules that this is the line responsible for doing that:

# Load drivers that match kernel-supplied alias
ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe -Q $env{MODALIAS}"

What I want to know is who send this for udev? usbcore module?

The driver core. In this case it's the USB core, which enumerates the devices on the USB bus. When the USB core discovers a new device, it requests a new object from the driver core, which sends the event.

Quoted 6 lines

The variable $env{MODALIAS} is something like this:

                 usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF

v0403 is the vendor ID, p6001 is the product ID, but the others? I didnt find anything about this in modprobe or udev docs....

MODALIAS strings are specific to every subsystem. They start with "<subsystem>:" and append all sorts of values depending on the individual properties of the subsystem.

For USB these are the values of:
idVendor, idProduct, bcdDevice, bDeviceClass, bDeviceSubClass, bDeviceProtocol, bInterfaceClass, bInterfaceSubClass, bInterfaceProtocol.

They are not defined outside the kernel, they are just used for wildcard matches with MODULE_ALIAS() strings in the modules itself:

  $ modinfo ftdi_sio.ko
  ...
  alias:          usb:v15BAp0003d*dc*dsc*dp*ic*isc*ip*
  alias:          usb:v0403pEE18d*dc*dsc*dp*ic*isc*ip*
  ...

The called modprobe matches the kernel supplied MODALIAS with the entries contained in the module itself, and loads all matching modules.

Kay