Skip to contentSkip to conversation

integrator-ap + ARM926EJ-S

U-Boot-Users Thierry Matalini 2 participants 2 messages Feb 14, 2005

lore
Share & tools
lore
#0 lore raw

I download the images from the ARM site
(http://www.arm.com/linux/prebuilt_download.html)
- u-boot-ap.axf
- Image.Integrator.2.6.9
- System.cramfs

I program all 3 images onto the flash, and I boot from u-boot. When I want to launch the kernel, the boot process freezes.

Am I doing something wrong ? I do need to configure something before program the images ?

Best Regs,
Thierry Matalini

#1 lore raw
Quoted 11 lines · Thierry Matalini

I download the images from the ARM site
(http://www.arm.com/linux/prebuilt_download.html)
- u-boot-ap.axf
- Image.Integrator.2.6.9
- System.cramfs

I program all 3 images onto the flash, and I boot from u-boot. When I want to launch the kernel, the boot process freezes.

Am I doing something wrong ? I do need to configure something before program the images ?

You need to run the mkimage utility that comes with U-Boot on the kernel image files and write the resulting image in flash instead. See below as an example:

mkimage -A arm -T kernel -C none -a 0x7fc0 -e 0x8000 -n u-linux \
-d arch/arm/boot/Image u-linux

Catalin