MMC2 support in linux-omap-2.6.27 (omap1)
I'm currently using linux-omap-2.6.27 (tag=omap1) and trying to add MMC2 support. I've back ported what I think I need from various files inn l-o-2.6.28-omap1. I will eventually move to 2.6.28-omap1 but for now am trying to get it working on 2.6.27.
Traces show that all looks good up until first command is issued, then nothing seems to happen. STAT reg shows 0, don't see clock or cmd activity. MMC1 is working fine with an SD card; MMC2 is connected to eMMC flash. Seems like I'm missing something basic like a clock or enable, though I've confirmed ICLK and FCLK are enabled. Any ideas?
Thanks,
twebb
Quoted 5 lines · twebb
I'm currently using linux-omap-2.6.27 (tag=omap1) and trying to add MMC2 support. I've back ported what I think I need from various files inn l-o-2.6.28-omap1. I will eventually move to 2.6.28-omap1 but for now am trying to get it working on 2.6.27.
Quoted 9 lines
Traces show that all looks good up until first command is issued, then nothing seems to happen. STAT reg shows 0, don't see clock or cmd activity. MMC1 is working fine with an SD card; MMC2 is connected to eMMC flash. Seems like I'm missing something basic like a clock or enable, though I've confirmed ICLK and FCLK are enabled. Any ideas?
Thanks,
twebb
I found at least part of my problem. SDVS field of HCTL was being set to 0x7 (3.3V) instead of 0x5 (1.8V), and apparently MMC2 must be set for 0x5.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 16 lines · twebb
Quoted 5 lines · twebb
I'm currently using linux-omap-2.6.27 (tag=omap1) and trying to add MMC2 support. I've back ported what I think I need from various files inn l-o-2.6.28-omap1. I will eventually move to 2.6.28-omap1 but for now am trying to get it working on 2.6.27.
Quoted 9 lines
Traces show that all looks good up until first command is issued, then nothing seems to happen. STAT reg shows 0, don't see clock or cmd activity. MMC1 is working fine with an SD card; MMC2 is connected to eMMC flash. Seems like I'm missing something basic like a clock or enable, though I've confirmed ICLK and FCLK are enabled. Any ideas?
Thanks,
twebb
Quoted 8 lines
I found at least part of my problem. SDVS field of HCTL was being set to
0x7(3.3V) instead of0x5(1.8V), and apparently MMC2 must be set for0x5.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
The most up to date omap_hsmmc.c is here:
That includes the 10 patches on LKML except number 8
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 39 lines · Shankar Ganesh
Quoted 36 lines · Adrian Hunter
Quoted 18 lines · twebb
Quoted 6 lines · twebb
I'm currently using linux-omap-2.6.27 (tag=omap1) and trying to add MMC2 support. I've back ported what I think I need from various files inn l-o-2.6.28-omap1. I will eventually move to 2.6.28-omap1 but for now am trying to get it working on 2.6.27.
Quoted 9 lines
Traces show that all looks good up until first command is issued, then nothing seems to happen. STAT reg shows 0, don't see clock or cmd activity. MMC1 is working fine with an SD card; MMC2 is connected to eMMC flash. Seems like I'm missing something basic like a clock or enable, though I've confirmed ICLK and FCLK are enabled. Any ideas?
Thanks,
twebbQuoted 8 lines
I found at least part of my problem. SDVS field of HCTL was being set to
0x7(3.3V) instead of0x5(1.8V), and apparently MMC2 must be set for0x5.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlThe most up to date
omap_hsmmc.cis here:That includes the 10 patches on LKML except number 8
Quoted 9 lines
Quoted 4 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlRefer http://git.omapzoom.com/?p=repo/omapkernel.git;a=summary has working MMC2 code. Also this version detects eMMC on MMC2
I'm having difficulty detecting eMMC flash on MMC2. I ported in the code from the git, and most everything looks good. However, it always fails detecting the eMMC with a timeout. If I handpoke commands to the eMMC I see the same thing - even with the most basic commands. I see CLK and CMDs going to the eMMC, but never see any responses on the CMD line from the eMMC. Any ideas what I might be doing wrong? (I do have an SD card working fine on MMC1. Also, the eMMC flash is hardwired with power and has no CardDetect or WriteProtect logic - so none of that should be an issue.)
Help,
twebb
(sorry for double posting)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html