Skip to contentSkip to conversation

how to configure android-2.6.27 kernel for an LCD display other than Zoom2 display

DISCUSSION twebb 1 participant 3 messages May 15, 2009 – May 27, 2009

lore
Share & tools
lore

twebb

author
#0 lore raw

I'm using the L25.6/android-2.6.27 kernel and am adapting it as necessary to OMAP3530-based hardware. However, I don't see how to configure the kernel for an LCD display other than the NEC display defined for ZOOM2 (which is an SPI-based display?). I'm using an LG display via the dss_data[17:0] interface of the 35xx - and this is working with a slightly modified version of lcd_omap3evm.c on the linux-omap-2.6.27-omap1 kernel. I'm not familiar with the new DSS that appears to be in android-2.6.27.

The LG display is WSVGA, but I'd be happy getting WVGA or VGA working on it for now. How can I configure the kernel to support a non-SPI-based LCD panel? How does this DSS differ with what appears in android-2.6.29/drivers/video/omap2 ?

Any help here would be appreciated.

Thanks,
twebb

author
#1 lore raw
Quoted 14 lines · twebb

I'm using the L25.6/android-2.6.27 kernel and am adapting it as necessary to OMAP3530-based hardware.  However, I don't see how to configure the kernel for an LCD display other than the NEC display defined for ZOOM2 (which is an SPI-based display?).  I'm using an LG display via the dss_data[17:0] interface of the 35xx - and this is working with a slightly modified version of lcd_omap3evm.c on the linux-omap-2.6.27-omap1 kernel.  I'm not familiar with the new DSS that appears to be in android-2.6.27.

The LG display is WSVGA, but I'd be happy getting WVGA or VGA working on it for now.  How can I configure the kernel to support a non-SPI-based LCD panel?  How does this DSS differ with what appears in android-2.6.29/drivers/video/omap2 ?

Quoted 5 lines

Any help here would be appreciated.

Thanks,
twebb

Any suggestions on this?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#2 lore raw
Quoted 15 lines · twebb
Quoted 14 lines · twebb

I'm using the L25.6/android-2.6.27 kernel and am adapting it as necessary to OMAP3530-based hardware.  However, I don't see how to configure the kernel for an LCD display other than the NEC display defined for ZOOM2 (which is an SPI-based display?).  I'm using an LG display via the dss_data[17:0] interface of the 35xx - and this is working with a slightly modified version of lcd_omap3evm.c on the linux-omap-2.6.27-omap1 kernel.  I'm not familiar with the new DSS that appears to be in android-2.6.27.

The LG display is WSVGA, but I'd be happy getting WVGA or VGA working on it for now.  How can I configure the kernel to support a non-SPI-based LCD panel?  How does this DSS differ with what appears in android-2.6.29/drivers/video/omap2 ?

Quoted 5 lines
Quoted 5 lines

Any help here would be appreciated.

Thanks,
twebb

Am I off base with these questions? I'd appreciate any feedback. Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html