Skip to contentSkip to conversation

2.6.13-rcX really this bad ?

DISCUSSION Danny ter Haar 3 participants 4 messages Aug 14, 2005

lore
Share & tools
lore
#0 lore raw

I've posted a couple of times than my newsserver is not stable with any 2.6.13-rcX kernels.
Last kernel that survived is 2.6.12-mm1 (18+days)
Of course i can just stick with that kernel, but i thought it would be wise to live on the edge and run a reasonable loaded server with the latest/greatest. This ends in disaster though...

These are last uptimes, all reset by panic on reset.

reboot   system boot  2.6.13-rc6-git5  Sun Aug 14 02:56    (09:07)
reboot   system boot  2.6.13-rc6-git4  Fri Aug 12 16:50    (1+19:13)
reboot   system boot  2.6.13-rc6-git3  Fri Aug 12 12:32    (04:16)
reboot   system boot  2.6.13-rc6-git3  Thu Aug 11 13:18    (1+03:29)
reboot   system boot  2.6.13-rc6-git2  Thu Aug 11 12:40    (00:35)
reboot   system boot  2.6.13-rc6-git1  Wed Aug 10 13:24    (23:52)
reboot   system boot  2.6.13-rc6       Wed Aug 10 02:46    (10:35)
reboot   system boot  2.6.13-rc6       Mon Aug  8 16:52    (1+20:29)
reboot   system boot  2.6.13-rc6       Sun Aug  7 22:07    (2+15:14)

Since i got no feedback on my previous posts, i either bring it the wrong way, or people don't care and i ought to shut up. I think however that just before releasing a new stable kernel these kind of feedback could be healthy to ironout some bugs.

For now i'll switch back to 2.6.12-mm1 and follow this mailling list and try again when i the problems seem to have been solved.

Danny

#1 lore raw
Quoted 7 lines · On Sun, Aug 14, 2005 at 10:10:18AM +0000 Danny ter Haar wrote:

I've posted a couple of times than my newsserver is not stable with any 2.6.13-rcX kernels.
Last kernel that survived is 2.6.12-mm1 (18+days)
Of course i can just stick with that kernel, but i thought it would be wise to live on the edge and run a reasonable loaded server with the latest/greatest. This ends in disaster though...

Quoted 5 lines

Since i got no feedback on my previous posts, i either bring it the wrong way, or people don't care and i ought to shut up. I think however that just before releasing a new stable kernel these kind of feedback could be healthy to ironout some bugs.

Is the machine running X? We need some output from it so we can debug what's going on, the info should be printed to the console. It would be great if you could run the latest kernel and see if you get any output. Also add nmi_watchdog=2 to the boot command line.

You can also set up a serial console or netconsole to capture the output from the server with the help of another machine, described in Documentation/serial-console.txt Documentation/networking/netconsole.txt

#2 lore raw
Quoted 10 lines · Alexander Nyberg
Quoted 3 lines · On Sun, Aug 14, 2005 at 10:10:18AM +0000 Danny ter Haar wrote:

I've posted a couple of times than my newsserver is not stable with any 2.6.13-rcX kernels.
Last kernel that survived is 2.6.12-mm1 (18+days)

Is the machine running X? We need some output from it so we can debug what's going on, the info should be printed to the console. It would be great if you could run the latest kernel and see if you get any output. Also add nmi_watchdog=2 to the boot command line.

Quoted 4 lines

You can also set up a serial console or netconsole to capture the output from the server with the help of another machine, described in Documentation/serial-console.txt Documentation/networking/netconsole.txt

Danny, could you please go to http://bugme.osdl.org/show_bug.cgi?id=4982
and fill new info there.

Alexander, could you please forward this email to Danny if you don't get bounces from him. I got this when tried to reply that his bug was sucked into bugzilla.
----------------------------------------------------------------------------
Delivery to the following recipient failed permanently:

[email protected]

Technical details of permanent failure:
TEMP_FAILURE: Could not initiate SMTP conversation with any hosts:
[bitbucket.cistron.nl (100): Connection timed out]

#3 lore raw
Quoted 4 lines · Alexey Dobriyan
Quoted 4 lines

Is the machine running X? We need some output from it so we can debug what's going on, the info should be printed to the console. It would be great if you could run the latest kernel and see if you get any output. Also add nmi_watchdog=2 to the boot command line.

No, it's not running X. It's running debian (amd64)
I allready posted more details http://newsgate.newsserver.nl/kernel/
including problems with SCSI.
_my_ guess it's an IRQ problem (acpi related) ?

Quoted 4 lines
Quoted 4 lines

You can also set up a serial console or netconsole to capture the output from the server with the help of another machine, described in Documentation/serial-console.txt Documentation/networking/netconsole.txt

As stated before, it's connected to a sercon, but not with capture capabilities. I've a program that captured a few panics/resets

Quoted 2 lines

Danny, could you please go to http://bugme.osdl.org/show_bug.cgi?id=4982
and fill new info there.

I certainly will!

Quoted 8 lines

Alexander, could you please forward this email to Danny if you don't get bounces from him. I got this when tried to reply that his bug was sucked into bugzilla.

[email protected]
Technical details of permanent failure:
TEMP_FAILURE: Could not initiate SMTP conversation with any hosts:
[bitbucket.cistron.nl (100): Connection timed out]

Ouch, wil look into this ...

Danny
[email protected]