Skip to contentSkip to conversation

Miscellaneous ioplug questions

DISCUSSION Rob Duncan 2 participants 4 messages Aug 9, 2018 – Aug 15, 2018

lore
Share & tools
lore

Rob Duncan

author
#0 lore raw

I have some questions about some ioplug implementation details:

- Is the value returned from the pointer callback supposed to be a monotonically increasing value, or should it wrap at the buffer size? The documentation says "get the current DMA position" which isn't clear to me.

- Must the pointer callback return values that are an integral multiple of the period size, or can it report partial periods?

- Should the poll FD be made writeable as soon as data is available, or only when at least avail_min is available?

Thanks,

Rob.

#1 lore raw
Quoted 10 lines · Rob Duncan

I have some questions about some ioplug implementation details:

- Is the value returned from the pointer callback supposed to be a monotonically increasing value, or should it wrap at the buffer size? The documentation says "get the current DMA position" which isn't clear to me.

- Must the pointer callback return values that are an integral multiple of the period size, or can it report partial periods?

The ioplug basically emulates the hardware driver behavior, and basically the pointer callback may return any position. Hence the answers to the questions above are: yes, it may wrap buffer size and yes, it may report partial periods.

Quoted 2 lines

- Should the poll FD be made writeable as soon as data is available, or only when at least avail_min is available?

The latter. Again, ioplug emulates the hardware driver, so the poll should behave same as the hardware driver does.
(Though, admittedly, not all plugin implementations follow this strictly....)

Takashi

author
#2 lore raw

Hi Takashi,

Quoted 7 lines
Quoted 2 lines

- Should the poll FD be made writeable as soon as data is available, or only when at least avail_min is available?

The latter. Again, ioplug emulates the hardware driver, so the poll should behave same as the hardware driver does.
(Though, admittedly, not all plugin implementations follow this strictly....)

So, the poll FD must be readable while there is at least avail_min in the buffer, and must NOT be readable if there is less than avail_min. Is that right?

To labor the point a bit, if exactly avail_min becomes available the poll FD must be made readable. If a single frame is now transferred, so the buffer has (avail_min - 1) available, what must the state of the poll FD be?

A couple more questions:

If we are configured to do blocking operations must the read and write callbacks always transfer the full requested size, or can they do partial transfers?

On the other hand, what if we are configured to do non-blocking operations?

Or does the caller guarantee not to request a transfer larger than what the ioplugin reports as available?

Thanks,

Rob.

#3 lore raw
Quoted 6 lines · Rob Duncan

Hi Takashi,

Quoted 3 lines
Quoted 2 lines

- Should the poll FD be made writeable as soon as data is available, or only when at least avail_min is available?

Quoted 8 lines
Quoted 4 lines

The latter. Again, ioplug emulates the hardware driver, so the poll should behave same as the hardware driver does.
(Though, admittedly, not all plugin implementations follow this strictly....)

So, the poll FD must be readable while there is at least avail_min in the buffer, and must NOT be readable if there is less than avail_min. Is that right?

Yes.

Quoted 4 lines

To labor the point a bit, if exactly avail_min becomes available the poll FD must be made readable. If a single frame is now transferred, so the buffer has (avail_min - 1) available, what must the state of the poll FD be?

The driver sipmly doesn't set POLLIN|POLLRDNORM bits (or POLLOUT|POLLWRNORM) unless avail >= avail_min.

Quoted 5 lines

A couple more questions:

If we are configured to do blocking operations must the read and write callbacks always transfer the full requested size, or can they do partial transfers?

In general, a partial transfer is always allowed no matter whether blocking or non-blocking mode is.

Takashi

Quoted 10 lines

On the other hand, what if we are configured to do non-blocking operations?

Or does the caller guarantee not to request a transfer larger than what the ioplugin reports as available?

Thanks,

Rob.