Skip to contentSkip to conversation

2.6.12-rc5

ACPI Kenneth Parrish 2 participants 2 messages May 31, 2005

lore
Share & tools
lore
#0 lore raw

Computer: Cyrix MII processor, VIA VP3 chipset e-machines 1999 Kernels various, now 2.6.12-rc5

Observation: experimental ACPI sleep state, aka active standby, appears to work with mainline kernels in that it's possible to do

# echo standby > /sys/power/state
and have the system suspend. The computer's green led that's inset
into the power button blinks slowly, then. And pressing the power button
brings the system back, unless you wait too long. I'm not sure exactly
how long, but I guess it may be roughly an hour or so until linux
no longer returns when the power button is pressed briefly.

--- MultiMail/Linux v0.46

#1 lore raw

Hi!

Quoted 6 lines

Computer: Cyrix MII processor, VIA VP3 chipset e-machines 1999 Kernels various, now 2.6.12-rc5

Observation: experimental ACPI sleep state, aka active standby, appears to work with mainline kernels in that it's possible to do

Quoted 6 lines
# echo standby > /sys/power/state
and have the system suspend. The computer's green led that's inset
into the power button blinks slowly, then. And pressing the power button
brings the system back, unless you wait too long. I'm not sure exactly
how long, but I guess it may be roughly an hour or so until linux
no longer returns when the power button is pressed briefly.

Did it work properly in any previous kernel?
Pavel