Skip to contentSkip to conversation

firmware upgrade

Bluez-devel Claudio Takahasi 2 participants 2 messages Sep 20, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi folks,

Before start update the firmware of my dongles I would like make sure that nothing is wrong. Sometimes, dongles upgrades can end up with a dead dongle :) I read some documents in the Marcel's home page(http://holtmann.org) but I am afraid of upgrade my dongles :)

I have the following dongles/adapters:

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

D-Link DBT-120 Hardware B3

$hciconfig -a hci0 version
hci0: Type: USB
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
Manufacturer: Cambridge Silicon Radio (10)
$hciconfig -a hci0 revision
hci0: Type: USB
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 HCI 15.3
Chip version: BlueCore02-External
Max key size: 56 bit
SCO mapping: HCI

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

D-Link DBT-122 Hardware A1

$hciconfig -a hci0 version
hci0: Type: USB
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 377:10 SCO MTU: 16:0 HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
Manufacturer: Broadcom Corporation (15)
$hciconfig -a hci0 revision
hci0: Type: USB
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 377:10 SCO MTU: 16:0 Firmware 0.3 / 9

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

IBM T41

$hciconfig -a hci0 version
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 HCI Ver: 1.1 (0x1) HCI Rev: 0x222 LMP Ver: 1.1 (0x1) LMP Subver: 0x222
Manufacturer: Cambridge Silicon Radio (10)
$hciconfig -a hci0 revision
hci0: Type: USB
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8 Build 546
Chip version: BlueCore02-External
Max key size: 128 bit
SCO mapping: HCI

I am not sure if upgrade will work in the DBT-122 and in my notebook IBM T41. If someone has tips or references of how do this procedure please send me the links.

Thanks in advance,
Claudio

maintainer
#1 lore raw

Hi Claudio,

Quoted 8 lines

Before start update the firmware of my dongles I would like make sure that nothing is wrong. Sometimes, dongles upgrades can end up with a dead dongle :) I read some documents in the Marcel's home page(http://holtmann.org) but I am afraid of upgrade my dongles :)

I have the following dongles/adapters:

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

D-Link DBT-120 Hardware B3

try only this dongle. This should work, but others may break.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel