Skip to contentSkip to conversation

perf record question regarding grouped events

DISCUSSION Thomas Richter 2 participants 2 messages Feb 19, 2025 – Feb 24, 2025

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a question on the intended usage of the grouped events as in test case 114 perf record tests subtest 'Basic leader sampling' test where this command is executed:

 # perf record -vv -e '{cycles,cycles}:uS' -- ...

In the debug output the following 2 event are installed:

------------------------------------------------------------
perf_event_attr:

  type                             0 (PERF_TYPE_HARDWARE)
  size                             136
  config                           0 (PERF_COUNT_HW_CPU_CYCLES)
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
  read_format                      ID|GROUP|LOST
  disabled                         1
  exclude_kernel                   1
  exclude_hv                       1
  freq                             1
  sample_id_all                    1
 ------------------------------------------------------------
 sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 5
 ------------------------------------------------------------
 perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  size                             136
  config                           0 (PERF_COUNT_HW_CPU_CYCLES)
  sample_type                      IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
  read_format                      ID|GROUP|LOST
  exclude_kernel                   1
  exclude_hv                       1
  sample_id_all                    1

------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd 5 flags 0x8 = 6

What puzzles me is that the first event with file descriptor 5 is installed for sampling. The second event with file descriptor 6 is installed for counting because event attribute members attr::freq and attr::sample_freq are zero.

So of the 2 cycles events installed, the group leader is sampling and the other event is counting.

Is this understanding correct?
The test then checks if the number of samples matches the count from the counting event?

I have a question on the intended usage of the grouped events as in test case 114 perf record tests subtest 'Basic leader sampling' test where this command is executed:

 # perf record -vv -e '{cycles,cycles}:uS' -- ...

In the debug output the following 2 event are installed:

------------------------------------------------------------
perf_event_attr:

  type                             0 (PERF_TYPE_HARDWARE)
  size                             136
  config                           0 (PERF_COUNT_HW_CPU_CYCLES)
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
  read_format                      ID|GROUP|LOST
  disabled                         1
  exclude_kernel                   1
  exclude_hv                       1
  freq                             1
  sample_id_all                    1
 ------------------------------------------------------------
 sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 5
 ------------------------------------------------------------
 perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  size                             136
  config                           0 (PERF_COUNT_HW_CPU_CYCLES)
  sample_type                      IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
  read_format                      ID|GROUP|LOST
  exclude_kernel                   1
  exclude_hv                       1
  sample_id_all                    1

------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd 5 flags 0x8 = 6

What puzzles me is that the first event with file descriptor 5 is installed for sampling. The second event with file descriptor 6 is installed for counting because event attribute members attr::freq and attr::sample_freq are zero.

So of the 2 cycles events installed, the group leader is sampling and the other event is counting.

Is this understanding correct?
The test then checks if the number of samples matches the count from the counting event?

Thanks a lot for your help.

Signature · 9 lines
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany
--
IBM Deutschland Research & Development GmbH

Vorsitzender des Aufsichtsrats: Wolfgang Wendt

Geschäftsführung: David Faller

Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294
#1 lore raw

Hello,

Quoted 43 lines · Thomas Richter

Hi all,

I have a question on the intended usage of the grouped events as in test case 114 perf record tests subtest 'Basic leader sampling' test where this command is executed:

 # perf record -vv -e '{cycles,cycles}:uS' -- ...

In the debug output the following 2 event are installed:

------------------------------------------------------------
perf_event_attr:

  type                             0 (PERF_TYPE_HARDWARE)
  size                             136
  config                           0 (PERF_COUNT_HW_CPU_CYCLES)
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
  read_format                      ID|GROUP|LOST
  disabled                         1
  exclude_kernel                   1
  exclude_hv                       1
  freq                             1
  sample_id_all                    1
 ------------------------------------------------------------
 sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 5
 ------------------------------------------------------------
 perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  size                             136
  config                           0 (PERF_COUNT_HW_CPU_CYCLES)
  sample_type                      IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
  read_format                      ID|GROUP|LOST
  exclude_kernel                   1
  exclude_hv                       1
  sample_id_all                    1

------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd 5 flags 0x8 = 6

What puzzles me is that the first event with file descriptor 5 is installed for sampling. The second event with file descriptor 6 is installed for counting because event attribute members attr::freq and attr::sample_freq are zero.

Quoted 6 lines

So of the 2 cycles events installed, the group leader is sampling and the other event is counting.

Is this understanding correct?
The test then checks if the number of samples matches the count from the counting event?

Yep, the syntax '{event1,event2}:S' is for group leader sampling which reduces the overhead of PMU interrupts. The idea is that those events are scheduled together so sampling is enabled only for the leader (usually the first) event and it reads counts from the member events using PERF_SAMPLE_READ.

So they should have the same counts if it uses the same events in a group.

Thanks,
Namhyung

Quoted 13 lines

Thanks a lot for your help.

Signature · 9 lines
Thomas Richter, Dept 3303, IBM s390 Linux Development, Boeblingen, Germany
--
IBM Deutschland Research & Development GmbH

Vorsitzender des Aufsichtsrats: Wolfgang Wendt

Geschäftsführung: David Faller

Sitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294