Skip to contentSkip to conversation

Re2: ATAPI Floppy Problem - not bogas with ls-120 2.4.9

DISCUSSION [email protected] 2 participants 2 messages Aug 31, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines · John Weber

I get the following error on reboot...

Aug 30 02:31:17 boolean kernel: ide-floppy: hdc: I/O error, pc = 5a, key 

=

Quoted 16 lines
Quoted 6 lines
Quoted 4 lines

5, asc = 24, ascq = 0

I have a ZIP 100, and am currently using ide-floppy driver 0.97 (included with linux 2.4.9).

Suggestions?

This should be fixed in -ac4. It's a bogus message. Ignore it.

What is the vendor identification on this unit?

Signature · 3 lines
Sam 

-

This message is not a bogas message with ls-120 drives in 2.4.9. No problem occurs in 2.4.8. And, no problem occurs in 2.4.9 if the ide-floppy.c and ide.c from 2.4.8 replace the ones in 2.4.9. But, if the 2.4.9 kernel is built as is, then message appears on boot up and on attempting to mount a ls-120 diskette even if a disketee is in the drive!

Floyd,

#1 lore raw
Quoted 7 lines · On Fri, 31 Aug 2001, [email protected] wrote:
Quoted 1 line

This should be fixed in -ac4. It's a bogus message. Ignore it.

This message is not a bogas message with ls-120 drives in 2.4.9. No problem occurs in 2.4.8. And, no problem occurs in 2.4.9 if the ide-floppy.c and ide.c from 2.4.8 replace the ones in 2.4.9. But, if the 2.4.9 kernel is built as is, then message appears on boot up and on attempting to mount a ls-120 diskette even if a disketee is in the drive!

Right, and that's what makes it bogus.

Signature · 1 line
Sam