Question of ipmi command "Set User Access" in phosphor-host-ipmid
Hi Richard,
In the process of creating an user,
I used the ipmi command "ipmitool priv <user id> <privilege level> [<channel number>]". The "UserPrivilege" of the user I created in dbus is empty. Because my LAN channel number is not 1.
https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_channel/user_mgmt.cpp#L878
Why did it need to check the request channel number before setting the dbus? I can't find the related restriction of it in "Set User Access Command" in IPMI SPEC.
Thanks
Best Regards,
Tony
Hi Tony,
Only IPMI offers channel based user level privilege as of now, Redfish uses single privilege across all channels. OpenBMC user management is designed to have single user level privilege. IPMI is designed to bind one of the channel privilege user to the user management, and rest maintain in it's own database. LAN 1 is used for that sync.
Note: Discussion started in Redfish forum to have a channel based restriction, but it's not yet materialized and requires more takers.
Regards,
Richard
Quoted 12 lines · Tony Lee (李文富)
In the process of creating an user,
I used the ipmi command "ipmitool priv <user id> <privilege level> [<channel number>]". The "UserPrivilege" of the user I created in dbus is empty. Because my LAN channel number is not 1.https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_channel/user_mgmt.cpp#L878
Why did it need to check the request channel number before setting the dbus? I can't find the related restriction of it in "Set User Access Command" in IPMI SPEC.
Thanks
Best Regards,
Tony
Hi Richard,
So, it need to check the request channel number before setting the dbus because it has to be in sync with system user privilege level.
Since my LAN1 and the request channel number are both 2. Once we can get LAN1 channel number dynamically
https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_channel/user_mgmt.cpp#L512
This issue will be solved right?
Quoted 42 lines
From: Thomaiyar, Richard Marian <[email protected]>
Sent: Tuesday, May 26, 2020 12:28 AM
To: Tony Lee (李文富) <[email protected]>
Cc: [email protected]
Subject: Re: Question of ipmi command "Set User Access" in phosphor-host-ipmidHi Tony,
Only IPMI offers channel based user level privilege as of now, Redfish uses single privilege across all channels. OpenBMC user management is designed to have single user level privilege. IPMI is designed to bind one of the channel privilege user to the user management, and rest maintain in it's own database. LAN 1 is used for that sync.
Note: Discussion started in Redfish forum to have a channel based restriction, but it's not yet materialized and requires more takers.
Regards,
Richard
Quoted 2 lines · Tony Lee (李文富)
In the process of creating an user,
I used the ipmi command "ipmitool priv <user id> <privilege level>[<channel number>]".
Quoted 1 line
The "UserPrivilege" of the user I created in dbus is empty. Because my LAN
channel number is not 1.
Quoted 2 lines
https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_chann
eQuoted 3 lines
l/user_mgmt.cpp#L878
Why did it need to check the request channel number before setting the
dbus?
Quoted 1 line
I can't find the related restriction of it in "Set User Access Command" in IPMI
SPEC.
Quoted 4 lines
Thanks
Best Regards,
Tony
Hi Tony,
Yes, that's correct. We already support channel configuration using json(channel_config.json under phosphor-ipmi-config), and sync channel can be identified by the first LAN medium channel number - else we can add one more configuration as well).
I am ok if you want to go ahead and fix it, else will try to fix the same in couple of weeks.
Regards,
Richard
Quoted 51 lines · Tony Lee (李文富)
Hi Richard,
So, it need to check the request channel number before setting the dbus because it has to be in sync with system user privilege level.
Since my LAN1 and the request channel number are both 2. Once we can get LAN1 channel number dynamically
https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_channel/user_mgmt.cpp#L512This issue will be solved right?
Quoted 40 lines
From: Thomaiyar, Richard Marian <[email protected]>
Sent: Tuesday, May 26, 2020 12:28 AM
To: Tony Lee (李文富) <[email protected]>
Cc: [email protected]
Subject: Re: Question of ipmi command "Set User Access" in phosphor-host-ipmidHi Tony,
Only IPMI offers channel based user level privilege as of now, Redfish uses single privilege across all channels. OpenBMC user management is designed to have single user level privilege. IPMI is designed to bind one of the channel privilege user to the user management, and rest maintain in it's own database. LAN 1 is used for that sync.
Note: Discussion started in Redfish forum to have a channel based restriction, but it's not yet materialized and requires more takers.
Regards,
Richard
Quoted 2 lines · Tony Lee (李文富)
In the process of creating an user,
I used the ipmi command "ipmitool priv <user id> <privilege level>[<channel number>]".
Quoted 1 line
The "UserPrivilege" of the user I created in dbus is empty. Because my LAN
channel number is not 1.
Quoted 1 line
https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_chann
eQuoted 3 lines
l/user_mgmt.cpp#L878
Why did it need to check the request channel number before setting the
dbus?
Quoted 1 line
I can't find the related restriction of it in "Set User Access Command" in IPMI
SPEC.
Quoted 3 lines
Thanks
Best Regards,
Tony
Quoted 5 lines · Richard Marian
Hi Tony,
Only IPMI offers channel based user level privilege as of now, Redfish uses single privilege across all channels. OpenBMC user management is designed to have single user level privilege. IPMI is designed to bind one of the channel privilege user to the user management, and rest maintain in it's own database. LAN 1 is used for that sync.
Note: Discussion started in Redfish forum to have a channel based restriction, but it's not yet materialized and requires more takers.
here: https://redfishforum.com/thread/279/channel-privilege-support-direction-redfish
Quoted 19 lines
Regards,
Richard
Quoted 13 lines · Tony Lee (李文富)
In the process of creating an user,
I used the ipmi command "ipmitool priv <user id> <privilege level> [<channel number>]". The "UserPrivilege" of the user I created in dbus is empty. Because my LAN channel number is not 1.https://github.com/openbmc/phosphor-host-ipmid/blob/master/user_channel/user_mgmt.cpp#L878
Why did it need to check the request channel number before setting the dbus? I can't find the related restriction of it in "Set User Access Command" in IPMI SPEC.
Thanks
Best Regards,
Tony