PATCH linux-2.6.27-rc7-git5]ARM:Add the Nuvoton w90P910 Platform support to LINUX-ARM tree
From: vincen.zswan [email protected]
Dear sir,
I have add the Nuvoton ARM series IC W90P910 Platform support to LINUX ARM tree and make a patch named patch-2.6.27-rc7-git5-w90p910.patch.
As the file size 177kb,so you can get the patch file from link:
http://www.mcuos.com/attachment.php?aid=583
If the patch file is not accepted by Linux, please give some advice , I need to modify it better.thanks!
Only add the mach-w90x900 directory to /linux/arch/arm and modify Makefile and Kconfig.
Now,The Platform code support only uart driver and add the w90p910_serial.c to /driver/serial and modify Makefile and Kconfig.
The Platform default config in arch/arm/configs/w90p910_defconfig
Changes:
patching file arch/arm/Kconfig
patching file arch/arm/Makefile
patching file arch/arm/configs/w90p910_defconfig
patching file arch/arm/mach-w90x900
patching file arch/arm/mm/Kconfig
patching file drivers/serial/Kconfig
patching file drivers/serial/Makefile
patching file drivers/serial/w90x900_serial.c
patching file include/linux/serial_core.h
Signature · 2 lines
Vincen Signed-off-by: vincen.zswan <[email protected]>
Quoted 9 lines · vincen
From: vincen.zswan [email protected]
Dear sir,
I have add the Nuvoton ARM series IC W90P910 Platform support to LINUX ARM tree and make a patch named patch-2.6.27-rc7-git5-w90p910.patch.As the file size 177kb,so you can get the patch file from link:
If posting large patches, it would generally be much easier to split them into smaller chunks of logical changes. For an example, the defconfig addition could be seperated from the main submission, etc.
Quoted 31 lines
If the patch file is not accepted by Linux, please give some advice , I need to modify it better.thanks!
Only add the mach-w90x900 directory to /linux/arch/arm and modify
MakefileandKconfig.
Now,The Platform code support only uart driver and add thew90p910_serial.cto /driver/serial and modifyMakefileandKconfig.The Platform default config in
arch/arm/configs/w90p910_defconfigChanges:
patching filearch/arm/Kconfig
patching filearch/arm/Makefile
patching filearch/arm/configs/w90p910_defconfigpatching file
arch/arm/mach-w90x900patching file
arch/arm/mm/Kconfig
patching filedrivers/serial/Kconfig
patching filedrivers/serial/Makefile
patching filedrivers/serial/w90x900_serial.c
patching fileinclude/linux/serial_core.hSignature · 7 lines
Vincen Signed-off-by: vincen.zswan <[email protected]> -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Signature · 3 lines
Ben ([email protected], http://www.fluff.org/) 'a smiley only costs 4 bytes'
Dear sir,
Thank you for your help.
2008/9/29, Ben Dooks <[email protected]>:
Quoted 52 lines · vincen
Quoted 9 lines
From: vincen.zswan [email protected]
Dear sir,
I have add the Nuvoton ARM series IC W90P910 Platform support to LINUX ARM tree and make a patch named patch-2.6.27-rc7-git5-w90p910.patch.As the file size 177kb,so you can get the patch file from link:
If posting large patches, it would generally be much easier to split them into smaller chunks of logical changes. For an example, the defconfig addition could be seperated from the main submission, etc.
Quoted 23 lines
If the patch file is not accepted by Linux, please give some advice , I need to modify it better.thanks!
Only add the mach-w90x900 directory to /linux/arch/arm and modify
MakefileandKconfig.
Now,The Platform code support only uart driver and add thew90p910_serial.cto /driver/serial and modifyMakefileandKconfig.The Platform default config in
arch/arm/configs/w90p910_defconfigChanges:
patching filearch/arm/Kconfig
patching filearch/arm/Makefile
patching filearch/arm/configs/w90p910_defconfigpatching file
arch/arm/mach-w90x900patching file
arch/arm/mm/Kconfig
patching filedrivers/serial/Kconfig
patching filedrivers/serial/Makefile
patching filedrivers/serial/w90x900_serial.c
patching fileinclude/linux/serial_core.hQuoted 8 lines
--
VincenSigned-off-by vincen.zswan <[email protected]>--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/--
Ben ([email protected], http://www.fluff.org/)'a smiley only costs 4 bytes'
Signature · 1 line
www.mcuos.com Best Regarts, Vincen