: Realtek ALC650 output problem
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1197>
======================================================================
Reported By: willits
Assigned To:
======================================================================
Project: ALSA - driver Issue ID: 1197 Category: PCI - intel8x0 Reproducibility: always Severity: minor Priority: normal Status: new Distribution: Kernel Version: 2.6.11 ====================================================================== Date Submitted: 06-16-2005 15:07 CEST Last Modified: 06-27-2005 13:58 CEST
======================================================================
Summary: Realtek ALC650 output problem
Description:
I have got a realtek ALC650 AC97 soundcard on my motherboard Abit BE7. The problem is that I have got 5.1 speakers, and for have my subwoofer and central speaker work, I need to put them on the "line in" connector instead of the black connector (the black connector doesn't work).
I haven't got this problem with Windows.
======================================================================
----------------------------------------------------------------------
tiwai - 06-24-05 18:41
----------------------------------------------------------------------
2.0 -> 5.1 isn't supported _on hardware_ with ALC650. Only 2.0 -> 4.0 is supported. But, of course, you can do 2.0->5.1 on software, i.e. in alsa-lib configuration. It's your homework :)
About 3D control: See my earlier comments.
----------------------------------------------------------------------
willits - 06-27-05 13:58
----------------------------------------------------------------------
I don't want 3D control (I have got 5.1 speaker that done this work). I am searching in the alsa configuration, but I didn't really understand the file alsa.conf, how I can get 2.0->5.1 by software ?
In the /usr/share/alsa/alsa.conf file, there are this :
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0 defaults.pcm.subdevice -1 defaults.pcm.front.card defaults.pcm.card defaults.pcm.front.device defaults.pcm.device defaults.pcm.rear.card defaults.pcm.card defaults.pcm.rear.device defaults.pcm.device defaults.pcm.center_lfe.card defaults.pcm.card defaults.pcm.center_lfe.device defaults.pcm.device defaults.pcm.side.card defaults.pcm.card defaults.pcm.side.device defaults.pcm.device defaults.pcm.surround40.card defaults.pcm.card defaults.pcm.surround40.device defaults.pcm.device defaults.pcm.surround41.card defaults.pcm.card defaults.pcm.surround41.device defaults.pcm.device defaults.pcm.surround50.card defaults.pcm.card defaults.pcm.surround50.device defaults.pcm.device defaults.pcm.surround51.card defaults.pcm.card defaults.pcm.surround51.device defaults.pcm.device defaults.pcm.surround71.card defaults.pcm.card defaults.pcm.surround71.device defaults.pcm.device defaults.pcm.iec958.card defaults.pcm.card defaults.pcm.iec958.device defaults.pcm.device defaults.pcm.modem.card defaults.pcm.card defaults.pcm.modem.device defaults.pcm.device defaults.rawmidi.card 0 defaults.rawmidi.device 0 defaults.rawmidi.subdevice -1 defaults.hwdep.card 0 defaults.hwdep.device 0 defaults.timer.class 2 defaults.timer.sclass 0 defaults.timer.card 0 defaults.timer.device 0 defaults.timer.subdevice 0
--> In this, I have seen that :
defaults.pcm.surround51.card defaults.pcm.card defaults.pcm.surround51.device defaults.pcm.device
But I didn't know how I can configure Alsa-lib for use this (surround51).
If you can help me
Issue History
Date Modified Username Field Change
======================================================================
06-16-05 15:07 willits New Issue 06-16-05 15:07 willits Kernel Version => 2.6.11 06-16-05 15:13 pzad Note Added: 0005056 06-16-05 15:19 willits Note Added: 0005057 06-16-05 15:21 pzad Note Added: 0005058 06-16-05 15:25 willits Note Added: 0005059 06-16-05 15:43 pzad Note Added: 0005060 06-16-05 16:10 willits Note Added: 0005062 06-16-05 16:11 willits File Added: test.state 06-17-05 15:10 tiwai Note Added: 0005075 06-17-05 20:32 willits Note Added: 0005079 06-17-05 20:34 willits Note Added: 0005080 06-22-05 18:12 tiwai Note Added: 0005139 06-23-05 11:17 willits Note Added: 0005168 06-23-05 11:23 willits Note Added: 0005169 06-23-05 11:23 jcdutton Note Added: 0005170 06-23-05 11:56 pzad Note Added: 0005172 06-23-05 12:01 tiwai Note Added: 0005174 06-23-05 19:21 willits Note Added: 0005192 06-23-05 19:26 willits Note Added: 0005193 06-23-05 22:42 pzad Note Added: 0005196 06-24-05 14:37 willits Note Added: 0005220 06-24-05 14:54 tiwai Note Added: 0005221 06-24-05 15:07 jcdutton Note Added: 0005225 06-24-05 15:19 tiwai Note Added: 0005227 06-24-05 15:24 willits Note Added: 0005228 06-24-05 16:15 tiwai Note Added: 0005232 06-24-05 16:24 tiwai Note Added: 0005233 06-24-05 17:27 willits Note Added: 0005241 06-24-05 17:28 willits File Added: ICH4.conf 06-24-05 17:28 willits File Added: ICH.conf 06-24-05 17:59 tiwai Note Added: 0005245 06-24-05 18:23 willits Note Added: 0005246 06-24-05 18:25 willits Note Edited: 0005246 06-24-05 18:31 tiwai Note Added: 0005247 06-24-05 18:36 willits Note Added: 0005248 06-24-05 18:41 tiwai Note Added: 0005249 06-27-05 13:58 willits Note Added: 0005271
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click