board: freescale: ls1046afrwy: Update I2C mux config
PATCH v2 4/14 board: freescale: ls1046afrwy: Update I2C mux config
Updates the board configuration to enable use of the PCA9547 I2C mux.
Signed-off-by Stephen Carlson <[email protected]>
--- board/freescale/ls1046afrwy/ls1046afrwy.c | 27 +------------------ configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046afrwy_tfa_defconfig | 1 + 3 files changed, 3 insertions(+), 26 deletions(-)
board/freescale/ls1046afrwy/ls1046afrwy.c +1 -26
@@ -22,6 +22,7 @@#include <fsl_esdhc.h> #include <fsl_sec.h> #include <fsl_dspi.h> +#include "../common/i2c_mux.h" #define LS1046A_PORSR1_REG 0x1EE0000#define BOOT_SRC_SD 0x20000000
@@ -38,32 +39,6 @@DECLARE_GLOBAL_DATA_PTR ; -int select_i2c_ch_pca9547 (u8 ch,int bus_num) -{ -int ret; - -#if CONFIG_IS_ENABLED (DM_I2C ) -struct udevice *dev; - - ret =i2c_get_chip_for_busnum (bus_num,I2C_MUX_PCA_ADDR_PRI , -1 , &dev); -if (ret) { -printf ("%s: Cannot find udev for a bus %d\n" , __func__, - bus_num); -return ret; - } - ret =dm_i2c_write (dev,0 , &ch,1 ); -#else - ret =i2c_write (I2C_MUX_PCA_ADDR_PRI ,0 ,1 , &ch,1 ); -#endif -if (ret) { -puts ("PCA: failed to select proper channel\n" ); -return ret; - } - -return 0 ; -} -static inline void demux_select_usb2 (void ) {u32 val;
configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig +1 -0
@@ -61,3 +61,4 @@ CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y CONFIG_RSA=y CONFIG_NXP_ESBC=y +CONFIG_FSL_USE_PCA9547_MUX=y
configs/ls1046afrwy_tfa_defconfig +1 -0
@@ -68,3 +68,4 @@ CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y +CONFIG_FSL_USE_PCA9547_MUX=y
Signature · 1 line
2.17.1