ARM64: dts: meson-gxl: add X96 Mini support
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/1 ARM64: dts: meson-gxl: add X96 Mini support
The X96 Mini is a TV box based on the Amlogic S905W chipset. There are two variants:
- 2 GiB/16GIB
- 1 GiB/8GIB
Both variants come with:
- 802.11a/b/g/n wifi (SP6330)
- HDMI , AV (CVBS) , spdif , ir extender output
- 2x USB 2.0 (utilizing both USB ports provided by the SoC)
The board seems to be very similar to the Oranth Tanix TX3 Mini , which is smaller to P281 reference boards so that is why it includes meson-gx-p23x-q20x.dtsi;
---
I forgot to tag it as patch in v1.
---
arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxl-s905w-x96-mini.dts | 38 +++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-x96-mini.dts
arch/arm64/boot/dts/amlogic/Makefile +0 -0
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-x96-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-x96-mini.dts new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Karl Chan <[email protected]>. + * Based on meson-gxl-s905w-tx3-mini.dts: + * + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amediatech,x96-mini", "amlogic,s905w", "amlogic,meson-gxl"; + model = "Shenzhen Amediatech Technology Co., X96 Mini"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */ + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "x96-mini:blue:power"; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + +}; + +&usb { + dr_mode = "host"; +};
Signature · 6 lines
2.39.2 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic