bitbake core-image-web-kiosk question ?
Hello Everyone,
I tried doing "bitbake core-image-web-kiosk"
And I got this :
====================
Loading cache: 100% |#####################################################################################################################################| Time: 0:00:00 Loaded 1310 entries from dependency cache.
ERROR: ExpansionError during parsing /home/bianchi77/poky/meta-web-kiosk/recipes-browser/vala/vala_0.16.0.bb | ETA: --:--:--
Traceback (most recent call last):
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 412,
in DataSmart.expandWithRefs(s='http://ftp.gnome.org/pub/GNOME/sources/${BPN}/${SHRT_VER}/${BP}.tar.xz http://ftp.gnome.org/pub/GNOME/sources/vala/0.36/vala-0.36.0.tar.xz', varname='SRC_URI'):
try:
> s = __expand_var_regexp__.sub(varparse.var_sub, s)
try:
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 111,
in VariableParse.var_sub(match=<_sre.SRE_Match object; span=(46, 57), match='${SHRT_VER}'>):
else:
> var = self.d.getVarFlag(key, "_content")
self.references.add(key)
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 794,
in DataSmart.getVarFlag(var='SHRT_VER', flag='_content', expand=True, noweakdefault=False, parsing=False):
cachename = var + "[" + flag + "]"
> value = self.expand(value, cachename)
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 436,
in DataSmart.expand(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}", varname='SHRT_VER'):
def expand(self, s, varname = None):
> return self.expandWithRefs(s, varname).value
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 426,
in DataSmart.expandWithRefs(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}", varname='SHRT_VER'):
except Exception as exc:
> raise ExpansionError(varname, s, exc) from exc
bb.data_smart.ExpansionError: Failure expanding variable SHRT_VER, expression was ${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]} which triggered exception AttributeError: module 'bb.data' has no attribute 'getVar'
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
===============
Does anyone know how to fix it ?
I used poky with pyro release,
Thanks
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
Quoted 54 lines · Riko Ho
Hello Everyone,
I tried doing "bitbake core-image-web-kiosk"
And I got this :
====================
Loading cache: 100% |#####################################################################################################################################|
Time: 0:00:00
Loaded 1310 entries from dependency cache.
ERROR: ExpansionError during parsing/home/bianchi77/poky/meta-web-kiosk/recipes-browser/vala/vala_0.16.0.bb
| ETA: --:--:--
Traceback (most recent call last):
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 412, in
DataSmart.expandWithRefs(s='http://ftp.gnome.org/pub/GNOME/sources/${BPN}/${SHRT_VER}/${BP}.tar.xz
http://ftp.gnome.org/pub/GNOME/sources/vala/0.36/vala-0.36.0.tar.xz',
varname='SRC_URI'):
try:
> s =__expand_var_regexp__.sub(varparse.var_sub, s)
try:
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 111, in
VariableParse.var_sub(match=<_sre.SRE_Match object; span=(46, 57),
match='${SHRT_VER}'>):
else:
> var =self.d.getVarFlag(key, "_content")
self.references.add(key)
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 794, in
DataSmart.getVarFlag(var='SHRT_VER', flag='_content', expand=True,
noweakdefault=False, parsing=False):
cachename = var + "[" + flag + "]"
> value =self.expand(value, cachename)File "
/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 436, in
DataSmart.expand(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}", varname='SHRT_VER'):
defexpand(self, s, varname = None):
> returnself.expandWithRefs(s, varname).valueFile "
/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 426, in
DataSmart.expandWithRefs(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}", varname='SHRT_VER'):
except Exception as exc:
> raiseExpansionError(varname, s, exc)from excbb.data_smart.ExpansionError: Failure expanding variable
SHRT_VER, expression was ${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]} which triggered exception AttributeError: module 'bb.data' has no attribute 'getVar'
Quoted 8 lines
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
===============
Does anyone know how to fix it ?
I used poky with pyro release,
Looking at the layer, this strikes clear Last commit: 3 years, 8 months ago (master branch)
so this layer is rusted. Pyro is less than a month old release.
So this layer would need work to bring it forward. To begin with delete the vala/ directory so
it can use the vala from core layer instead of a pinned version.
Quoted 18 lines
Thanks
--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
FriendlyArm Mini6410 ?
Hello Everyone,
I want to use Yocto for my FriendlyArm Mini6410,
Where should I begin to start ?
Thanks
Re: FriendlyArm Mini6410 ?
Hi Riko,
Quoted 4 lines · Riko Ho
Hello Everyone,
I want to use Yocto for my FriendlyArm Mini6410,
Where should I begin to start ?
Please read following thread:
https://lists.yoctoproject.org/pipermail/yocto/2014-June/020009.html
Quoted 7 lines
Thanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
BR,
marek
Signature · 10 lines
as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com
Re: FriendlyArm Mini6410 ?
Hi Everyone,
Is it possible that I only change the kernel config to support this CPU
S3C6410 ? or I'm gonna need something else ?
bitbake linux-yocto -c menuconfig ?
It's ARM1176JZF-S based CPU
Thanks
Quoted 19 lines · Belisko Marek
Hi Riko,
Quoted 4 lines · Riko Ho
Hello Everyone,
I want to use Yocto for my FriendlyArm Mini6410,
Where should I begin to start ?Please read following thread:
https://lists.yoctoproject.org/pipermail/yocto/2014-June/020009.htmlQuoted 6 lines
Thanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoBR,
marek
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
Image type on bitbake ?
In reply to Belisko MarekHi Everyone,
What parameter do I add to bitbake for getting *.hddimg or *.wic image ?
for example bitbake -??? core-image-sato
Thanks
Compiling meta-browser ==>chromium ? cleaning ?
In reply to Belisko MarekHello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it,
Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive
Thanks
Re: Compiling meta-browser ==>chromium ? cleaning ?
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.
Quoted 1 line
And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean foo
Quoted 17 lines · Riko Ho
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveThanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Re: Compiling meta-browser ==>chromium ? cleaning ?
What version are you talking about ? how can I know that ?
Thanks
Quoted 32 lines · Martin Jansa
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.Quoted 1 line
And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooOn Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <[email protected] <mailto:[email protected]>> wrote:
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveThanks
--
_______________________________________________
yocto mailing list
[email protected] <mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
dd image to sdcard ?
In reply to Martin JansaHi Everyone,
Which one of these files can be downloaded by "dd" directly to SDcard ? or how to write it to sdcard ?
lrwxrwxrwx 1 bianchi77 bianchi77 61 Jun 18 19:34 core-image-minimal-xfce-beaglebone.ext3 -> core-image-minimal-xfce-beaglebone-20170618070558.rootfs.ext3 lrwxrwxrwx 1 bianchi77 bianchi77 65 Jun 18 19:34 core-image-minimal-xfce-beaglebone.manifest -> core-image-minimal-xfce-beaglebone-20170618070558.rootfs.manifest lrwxrwxrwx 1 bianchi77 bianchi77 64 Jun 18 19:34 core-image-minimal-xfce-beaglebone.tar.bz2 -> core-image-minimal-xfce-beaglebone-20170618070558.rootfs.tar.bz2
lrwxrwxrwx 1 bianchi77 bianchi77 25 Jun 18 18:17 MLO -> MLO-beaglebone-2017.01-r0
lrwxrwxrwx 1 bianchi77 bianchi77 25 Jun 18 18:17 MLO-beaglebone -> MLO-beaglebone-2017.01-r0
-rw-r--r-- 1 bianchi77 bianchi77 70K Jun 18 18:17 MLO-beaglebone-2017.01-r0
-rw-rw-r-- 2 bianchi77 bianchi77 48M Jun 18 19:21 modules--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.tgz
lrwxrwxrwx 2 bianchi77 bianchi77 75 Jun 18 19:21 modules-beaglebone.tgz -> modules--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.tgz
-rw-r--r-- 1 bianchi77 bianchi77 360K Jun 18 18:17 u-boot-beaglebone-2017.01-r0.img
lrwxrwxrwx 1 bianchi77 bianchi77 32 Jun 18 18:17 u-boot-beaglebone.img -> u-boot-beaglebone-2017.01-r0.img lrwxrwxrwx 1 bianchi77 bianchi77 32 Jun 18 18:17 u-boot.img -> u-boot-beaglebone-2017.01-r0.img lrwxrwxrwx 2 bianchi77 bianchi77 74 Jun 18 19:21 zImage -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.bin -rw-r--r-- 2 bianchi77 bianchi77 32K Jun 18 19:21 zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-bone-20170618070558.dtb -rw-r--r-- 2 bianchi77 bianchi77 34K Jun 18 19:21 zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-boneblack-20170618070558.dtb -rw-r--r-- 2 bianchi77 bianchi77 5.4M Jun 18 19:21 zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.bin lrwxrwxrwx 2 bianchi77 bianchi77 80 Jun 18 19:21 zImage-am335x-boneblack.dtb -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-boneblack-20170618070558.dtb lrwxrwxrwx 2 bianchi77 bianchi77 75 Jun 18 19:21 zImage-am335x-bone.dtb -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-bone-20170618070558.dtb lrwxrwxrwx 2 bianchi77 bianchi77 74 Jun 18 19:21 zImage-beaglebone.bin -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.bin
thanks
Re: dd image to sdcard ?
Quoted 3 lines · Riko Ho
Which one of these files can be downloaded by "dd" directly to SDcard ? or how to write it to sdcard ?
The beaglebone BSP doesn't write a SD card image (although it probably should now that wic exists). Google has various pages explaining how a beaglebone needs a SD card to be formatted,
https://github.com/linneman/planck/wiki/How-to-create-a-Boot-SD-Card-for-the-BeagleBone-black
was near the top of my search.
Ross
Re: dd image to sdcard ?
Quoted 7 lines · Ross
Quoted 3 lines · Riko Ho
Which one of these files can be downloaded by "dd" directly to SDcard ? or how to write it to sdcard ?
Quoted 6 lines
The beaglebone BSP doesn't write a SD card image (although it probably should now that wic exists). Google has various pages explaining how a beaglebone needs a SD card to be formatted,
https://github.com/linneman/planck/wiki/How-to-create-a-Boot-SD-Card-for-the-BeagleBone-black
was near the top of my search.
If you're using 'beaglebone' machine defined in meta-yocto-bsp, then there is a corresponding wks file
https://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto-bsp/wic/beaglebone.wks
which should produce a bootable SD card image. Both wic and wic.bmap are added to IMAGE_FSTYPES automatically.
Cheers,
Signature · 2 lines
Maciej Borzecki RnDity
Re: dd image to sdcard ?
Thanks Guys,
I think this one will answer my question,
http://git.yoctoproject.org/cgit.cgi/poky/tree/README.hardware
Line 140...
|Texas Instruments Beaglebone (beaglebone) ========================================= ....... Anyway I recompiled the image to get 'wic' file now. IMAGE_FSTYPES ="ext3 tar.bz2 wic" |
Quoted 18 lines · Maciej Borzęcki
Quoted 10 lines · Ross
Quoted 2 lines · Riko Ho
Which one of these files can be downloaded by "dd" directly to SDcard ? or how to write it to sdcard ?
The beaglebone BSP doesn't write a SD card image (although it probably should now that wic exists). Google has various pages explaining how a beaglebone needs a SD card to be formatted,
https://github.com/linneman/planck/wiki/How-to-create-a-Boot-SD-Card-for-the-BeagleBone-black
was near the top of my search.If you're using 'beaglebone' machine defined in meta-yocto-bsp, then there is a corresponding wks file
https://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto-bsp/wic/beaglebone.wks
which should produce a bootable SD card image. Bothwicandwic.bmapare added toIMAGE_FSTYPESautomatically.Cheers,
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
In reply to Martin JansaHello Everyone,
How can I obtain : rtl8192eu_nic.bin?
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2 usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed
Thanks,
Quoted 32 lines · Martin Jansa
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.Quoted 1 line
And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooOn Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <[email protected] <mailto:[email protected]>> wrote:
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveThanks
--
_______________________________________________
yocto mailing list
[email protected] <mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
Re: RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
Quoted 4 lines · Riko Ho
Hello Everyone,
How can I obtain : rtl8192eu_nic.bin?
Quoted 9 lines
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
usb 1-1:request_firmware(rtlwifi/rtl8192eu_nic.bin)failed
you probably need to add the nonfree firmware bits something like this
and
might help
Quoted 53 lines
Thanks,
On 18/06/17 15:49, Martin Jansa wrote:
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.Quoted 1 line
And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooQuoted 11 lines · Riko Ho
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveQuoted 6 lines
Thanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Re: RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
I've put meta == > linux-firmware, but stil doesn't work, probably a hardware issue ?
I'll post my debug log later on,
I've checked that it can read *.bin on /lib/firmware, but still can not initialize properly, don't know why yet.
Quoted 74 lines · Khem Raj
Quoted 4 lines · Riko Ho
Hello Everyone,
How can I obtain : rtl8192eu_nic.bin?
Quoted 9 lines
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
usb 1-1:request_firmware(rtlwifi/rtl8192eu_nic.bin)failedyou probably need to add the nonfree firmware bits something like this
and
might help
Quoted 50 lines
Thanks,
On 18/06/17 15:49, Martin Jansa wrote:
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.Quoted 1 line
And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooQuoted 10 lines · Riko Ho
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveQuoted 6 lines
Thanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
Re: RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
In reply to Khem RajI got all the files needed, but now I get no response from the dongle when I plug it,
Here's the files on the board :
root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.bin rtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.bin rtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin rtl8192cufw_A.bin rtl8723aufw_B.bin rtl8723fw.bin rtl8192cufw_B.bin rtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.bin
Quoted 74 lines · Khem Raj
Quoted 4 lines · Riko Ho
Hello Everyone,
How can I obtain : rtl8192eu_nic.bin?
Quoted 9 lines
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
usb 1-1:request_firmware(rtlwifi/rtl8192eu_nic.bin)failedyou probably need to add the nonfree firmware bits something like this
and
might help
Quoted 50 lines
Thanks,
On 18/06/17 15:49, Martin Jansa wrote:
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.Quoted 1 line
And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooQuoted 10 lines · Riko Ho
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveQuoted 6 lines
Thanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
Re: RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
Quoted 2 lines · Riko Ho
I got all the files needed, but now I get no response from the dongle when I plug it,
you might want to check logs and see if there are udev events generated on insertion.
Quoted 104 lines
Here's the files on the board :
root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.bin rtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.bin rtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin rtl8192cufw_A.bin rtl8723aufw_B.bin rtl8723fw.bin rtl8192cufw_B.bin rtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.binOn 20/06/17 03:57, Khem Raj wrote:
On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <[email protected]> wrote:
Hello Everyone,
How can I obtain : rtl8192eu_nic.bin?
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
usb 1-1:request_firmware(rtlwifi/rtl8192eu_nic.bin)failedyou probably need to add the nonfree firmware bits something like this
and
might help
Thanks,
On 18/06/17 15:49, Martin Jansa wrote:
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooOn Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <[email protected]> wrote:
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveThanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/
Re: RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
How can I obtain that "udev" ? and where can I find the log ? "dmesg" | "grep" ?
Two days ago, I saw activity on UART when the dongle was inserted, but it's gone now, I can't see the activity.. Any clues ?
Thanks
Quoted 109 lines · Khem Raj
Quoted 2 lines · Riko Ho
I got all the files needed, but now I get no response from the dongle when I plug it,
you might want to check logs and see if there are udev events generated on insertion.
Quoted 103 lines
Here's the files on the board :
root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.bin rtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.bin rtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin rtl8192cufw_A.bin rtl8723aufw_B.bin rtl8723fw.bin rtl8192cufw_B.bin rtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.binOn 20/06/17 03:57, Khem Raj wrote:
On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <[email protected]> wrote:
Hello Everyone,
How can I obtain : rtl8192eu_nic.bin?
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
usb 1-1:request_firmware(rtlwifi/rtl8192eu_nic.bin)failedyou probably need to add the nonfree firmware bits something like this
and
might help
Thanks,
On 18/06/17 15:49, Martin Jansa wrote:
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooOn Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <[email protected]> wrote:
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveThanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *
Re: RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
Quoted 6 lines · Riko Ho
How can I obtain that "udev" ? and where can I find the log ? "dmesg" | "grep" ?
Two days ago, I saw activity on UART when the dongle was inserted, but it's gone now, I can't see the activity..
Any clues ?
dmesg should have some information may be
Quoted 125 lines
Thanks
On 20/06/17 12:51, Khem Raj wrote:
On Mon, Jun 19, 2017 at 8:46 PM, Riko Ho <[email protected]> wrote:
I got all the files needed, but now I get no response from the dongle when I plug it,
you might want to check logs and see if there are udev events generated on insertion.
Here's the files on the board :
root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.bin rtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.bin rtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin rtl8192cufw_A.bin rtl8723aufw_B.bin rtl8723fw.bin rtl8192cufw_B.bin rtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.binOn 20/06/17 03:57, Khem Raj wrote:
On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <[email protected]> wrote:
Hello Everyone,
How can I obtain : rtl8192eu_nic.bin?
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
usb 1-1:request_firmware(rtlwifi/rtl8192eu_nic.bin)failedyou probably need to add the nonfree firmware bits something like this
and
might help
Thanks,
On 18/06/17 15:49, Martin Jansa wrote:
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooOn Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <[email protected]> wrote:
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveThanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/
Re: RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
I got those messages :
===
musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89, <AValid), retry #1, port1 00000100 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89, <AValid), retry #2, port1 00000104 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89, <AValid), retry #3, port1 00000104 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (88, <AValid), retry #3, port1 0008010c
====
waiting for vrise ?
Quoted 134 lines · Khem Raj
Quoted 6 lines · Riko Ho
How can I obtain that "udev" ? and where can I find the log ? "dmesg" | "grep" ?
Two days ago, I saw activity on UART when the dongle was inserted, but it's gone now, I can't see the activity..
Any clues ?dmesg should have some information may be
Quoted 125 lines
Thanks
On 20/06/17 12:51, Khem Raj wrote:
On Mon, Jun 19, 2017 at 8:46 PM, Riko Ho <[email protected]> wrote:
I got all the files needed, but now I get no response from the dongle when I plug it,
you might want to check logs and see if there are udev events generated on insertion.
Here's the files on the board :
root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.bin rtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.bin rtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin rtl8192cufw_A.bin rtl8723aufw_B.bin rtl8723fw.bin rtl8192cufw_B.bin rtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.binOn 20/06/17 03:57, Khem Raj wrote:
On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <[email protected]> wrote:
Hello Everyone,
How can I obtain : rtl8192eu_nic.bin?
I got this message :
RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
usb 1-1:request_firmware(rtlwifi/rtl8192eu_nic.bin)failedyou probably need to add the nonfree firmware bits something like this
and
might help
Thanks,
On 18/06/17 15:49, Martin Jansa wrote:
You didn't say which versions you're using.
If you're using latest oe-core with gcc7 then you will need v3 version of this change:
http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
I'll send it later today.And how can I clean after building it ? It took about 70Gb of my drive
Like any other recipe:
bitbake -c clean fooOn Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <[email protected]> wrote:
Hello Everyone,
I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%,
I used bitbake for doing it,Is chromium not compatible with arm CPU ? it was working with
X86_64before.
And how can I clean after building it ? It took about 70Gb of my driveThanks
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/--
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/
Signature · 10 lines
* /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ *