Skip to contentSkip to conversation

Help with J5600 (Model: 9000/785/J5600)

parisc-linux Kyle McMartin 2 participants 2 messages Jan 26, 2007 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Kyle McMartin

author
#1 lore raw
Quoted 8 lines · Michael Greene

I am trying to get any version of hppa linux running on an old J5600, <snip>
SBA found Astro 2.1 at 0xfed00000
Elroy version TR4.0 (0x5) found at 0xfed30000
PCI: Enabled native mode for NS87415 (pif=0x8f)
iosapic: 0xfed30800 : no IRT entry for slot 12, pin 1
iosapic: no IRTE for 0000:00:0c.0 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 13, pin 1

Quoted 8 lines

iosapic: no IRTE for 0000:00:0d.0 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 14, pin 4
iosapic: no IRTE for 0000:00:0e.2 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1
iosapic: no IRTE for 0000:00:0f.0 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1
iosapic: no IRTE for 0000:00:0f.1 (IRQ not connected?) Elroy version TR4.0 (0x5) found at 0xfed32000

Do you have any PCI cards in this machine? Something is badly broken in the firmware.
_______________________________________________
parisc-linux mailing list [email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 17 lines · Kyle McMartin
Quoted 7 lines · Michael Greene

I am trying to get any version of hppa linux running on an old J5600, <snip> SBA found Astro 2.1 at 0xfed00000
Elroy version TR4.0 (0x5) found at 0xfed30000
PCI: Enabled native mode for NS87415 (pif=0x8f)
iosapic: 0xfed30800 : no IRT entry for slot 12, pin 1
iosapic: no IRTE for 0000:00:0c.0 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 13, pin 1

Quoted 8 lines

iosapic: no IRTE for 0000:00:0d.0 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 14, pin 4
iosapic: no IRTE for 0000:00:0e.2 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1
iosapic: no IRTE for 0000:00:0f.0 (IRQ not connected?)
iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1
iosapic: no IRTE for 0000:00:0f.1 (IRQ not connected?) Elroy version TR4.0 (0x5) found at 0xfed32000

Quoted 2 lines

Do you have any PCI cards in this machine? Something is badly broken in the firmware.

Ok, I was wrong:

I/O MODULE INFORMATION

IODC IODC
Path Decimal Type Location HVER SVER Vers Dep
------------ ----------- --------------------- ---------- ---- ---- ---- ----

PCI1         10/0/1/0    SCSI                  slot 1     0070 a300 0x00 0x00
LAN          10/0/12/0   Ethernet              built-in   0040 a200 0x02 0x00
AUDIO        10/0/13/0   Audio                 built-in
IDE          10/0/14/0   IDE                   built-in   0040 a300 0x00 0x00
SUPERIO MISC 10/0/14/1   Bridge Device         built-in
SERIAL_1     10/0/14/1/1 RS232 Port            built-in   0040 8c00 0x01 0x00
SERIAL_2     10/0/14/1/2 RS232 Port            built-in   0040 8c00 0x01 0x00
PARALLEL     10/0/14/1/3 Parallel Port         built-in
USB          10/0/14/2   USB                   built-in   0040 a900 0x98 0x00
SCSI         10/0/15/0   SCSI                  built-in   0040 a300 0x00 0x00
FWSCSI       10/0/15/1   SCSI                  built-in   0040 a300 0x00 0x00
PCI2         10/2/2/0    SCSI                  slot 2     0070 a300 0x00 0x00
GRAPHICS(7)  10/6/7/0    HPA4982A              slot 7     0070 8500 0x01 0x00

There were 2 A4976A PCI Fast Wide Differential SCSI Adapter installed (PCI1 and PCI2). I pulled both cards and the system boots fine.

Mike

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux