Suggestion: secondary socket address
suggestion in result of persistent development problems sky2 driver for "Marvell Technology" network cards:
add possibility to set backup direction of socket for each drbd resource
example :
on host01.domain {
device /dev/drbd0;
disk /dev/sdb1;
address 10.0.2.2:7788;
address-backup 10.0.1.200:7788;
meta-disk internal;
}or may be with backup leveling
address-backup 10.0.1.200:7788 level 1; // if primary failed -
then here
address-backup 10.0.3.200:7788 level 2; // if primary and secondary faled - then try to reconnect thru this connection
eth0 : 10.0.1.0/24 - main corporate LAN
eth1 : 10.0.2.0/24 - only interserver network - not for real client eth2 : 10.0.3.0/24 - additional lan/wan connections
listeners for level 1,2 may be not initialised on startup, but only in error state of primary listener. when primary listener will back (periodical recheck) - drbd communication must return automaticaly to that.
+ additionally notifies about channel changes to admin email.
Lars Ellenberg
maintainer/ 2007-03-05 21:14:48 +0200
\ [email protected]:
Quoted 12 lines
suggestion in result of persistent development problems sky2 driver for "Marvell Technology" network cards:
add possibility to set backup direction of socket for each drbd resource
example :on host01.domain { device /dev/drbd0; disk /dev/sdb1; address 10.0.2.2:7788; address-backup 10.0.1.200:7788; meta-disk internal; }
Quoted 8 lines
or may be with backup leveling
address-backup 10.0.1.200:7788 level 1; // if primary failed - then here
address-backup 10.0.3.200:7788 level 2; // if primary and secondary faled - then try to reconnect thru
this connectioneth0 : 10.0.1.0/24 - main corporate LAN
eth1 : 10.0.2.0/24 - only interserver network - not for real client eth2 : 10.0.3.0/24 - additional lan/wan connections
I don't see us implementing a fallback
solution like this in module code.
you'd have to monitor and trigger this from userland.
we might add a drbdadm subcommand like
"drbdadm reconnect --use-backup-link=3"
and we might add an optional configuration directive, so the config would be all in one place.
but you can do something like that right
now already using drbdsetup directly.
btw, if we do something like that, be sure:
we won't do this because some nic driver is not yet stable.
but because it might have general usage to achieve a higher level of redunancy in the network connection, beyond what is available with the linux bonding driver.
Quoted 4 lines
listeners for level 1,2 may be not initialised on startup, but only in error state of primary listener. when primary listener will back (periodical recheck) - drbd communication must return automaticaly to that.
+ additionally notifies about channel changes to admin email.
since this would be triggered from monitoring (likely: scripts), you may then trigger any other action you like as well.
Signature · 3 lines
: Lars Ellenberg Tel +43-1-8178292-55 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Vivenotgasse 48, A-1120 Vienna/Europe http://www.linbit.com :