Skip to contentSkip to conversation

Bluetooth: hci_uart: fix race during initialization

PATCH RESEND Applied Arseniy Krasnov 3 participants 3 messages Feb 1, 2025 – Feb 3, 2025 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

PATCH RESEND v2 1/1 Bluetooth: hci_uart: fix race during initialization

'hci_register_dev()' calls power up function, which is executed by kworker - 'hci_power_on()'. This function does access to bluetooth chip using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'. Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after 'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will be executed before setting this bit. In that case HCI init logic fails.

Patch moves setting of 'HCI_UART_PROTO_READY' before calling function 'hci_uart_register_dev()'.

---
Changelog v1->v2:
* Move 'set_bit()' before 'hci_uart_register_dev()' instead of adding new bit 'HCI_UART_PROTO_INIT'.

 drivers/bluetooth/hci_ldisc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_ldisc.c +2 -1
index 30192bb083549..07b9aa09bbe2e 100644
@@ -704,12 +704,13 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
 
 	hu->proto = p;
 
+	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+
 	err = hci_uart_register_dev(hu);
 	if (err) {
 		return err;
 	}
 
-	set_bit(HCI_UART_PROTO_READY, &hu->flags);
 	return 0;
 }
 
Signature · 1 line
2.30.1
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=929721

---Test result---

Test Summary:

CheckPatch                    PENDING   0.29 seconds
GitLint                       PENDING   0.19 seconds
SubjectPrefix                 PASS      0.09 seconds
BuildKernel                   PASS      24.53 seconds
CheckAllWarning               PASS      27.01 seconds
CheckSparse                   PASS      30.67 seconds
BuildKernel32                 PASS      24.47 seconds
TestRunnerSetup               PASS      428.20 seconds
TestRunner_l2cap-tester       PASS      23.35 seconds
TestRunner_iso-tester         PASS      33.47 seconds
TestRunner_bnep-tester        PASS      4.72 seconds
TestRunner_mgmt-tester        FAIL      118.88 seconds
TestRunner_rfcomm-tester      PASS      7.58 seconds
TestRunner_sco-tester         PASS      9.33 seconds
TestRunner_ioctl-tester       PASS      7.97 seconds
TestRunner_mesh-tester        PASS      5.85 seconds
TestRunner_smp-tester         PASS      6.93 seconds
TestRunner_userchan-tester    PASS      4.97 seconds
IncrementalBuild              PENDING   0.76 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 490, Passed: 484 (98.8%), Failed: 2, Not Run: 4

Failed Test Cases

LL Privacy - Add Device 2 (2 Devices to AL)          Failed       0.162 seconds
LL Privacy - Add Device 3 (AL is full)               Failed       0.193 seconds

##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:

---
Regards,
Linux Bluetooth

#2 lore raw
In reply to Arseniy Krasnov
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 9 lines · On Sat, 1 Feb 2025 19:24:31 +0300 you wrote:

'hci_register_dev()' calls power up function, which is executed by kworker - 'hci_power_on()'. This function does access to bluetooth chip using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'. Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after 'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will be executed before setting this bit. In that case HCI init logic fails.

[...]

Here is the summary with links:
- [RESEND,v2] Bluetooth: hci_uart: fix race during initialization

    https://git.kernel.org/bluetooth/bluetooth-next/c/c411c62cc133

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html