Skip to contentSkip to conversation

Mounting JFFS2 compressed Ramdisk on MTD partition

DISCUSSION Niraj Maheshwari 1 participant 1 message Jan 12, 2005 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Hi.

I am using JFFS2 and MTD on our target for booting the Ramdisk from MTD device ( Intel W18 Flash )

Kernel command line: root=/dev/mtdblock1 rw mem=64M rootfstype=jffs2 console=ttyS0,115200 ramdisk=8192

I have compressed the RAMDISK to have JFFS2 Ramdisk image and loaded in to the Flash on the specified memory location. I have also created a MTD partition ( /dev/mtdblock1) which is pointing to flash memory location where the JFFS2 compressed ramdisk image is there.

My idea is to load JFFS2 RAMdisk from flash ( specified in the KERNEL config line ) because i have a very limited memory in Flash.

Here is the logs for the same. I am getting this error eveytime when Linux Kernel tries to mount the JFFS2 compressed Ramdisk from the Flash Device.

logs:

INIT: Eep. Unknown node type 0080 at 00186f34 was marked REF_UNCHECKED
Node header CRC failed at 00186f34. But it must have been OK earlier.
Node was: { 0080, 2080, 00800080, 00800080 } Node totlen on flash (0x00800080) != totlen from node ref (0x000001b4)

and it keeps on repearing the same way.

I am formatting the flash completely. I have verified that all the flash sectors have been erased correctly. By the way i am using NOR Flash ( Intel W18 Flash).

Important thing to note that :

I am able to load the RAMdisk in /mnt/temp directory by issuing :

mount -t jffs2 /dev/mtdblock1 /mnt/temp.

But if i ask kernel to pick up the RAMdisk from /dev/mtdblock1 in the kernel config line then it gives me lot of errors as mentioned above.

Do you have any idea ?

Thanks and regards
Niraj