Skip to contentSkip to conversation

i2c: i801: Remove i801_set_block_buffer_mode

PATCH Applied Heiner Kallweit 3 participants 3 messages Nov 18, 2021 – Nov 29, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 i2c: i801: Remove i801_set_block_buffer_mode

If FEATURE_BLOCK_BUFFER is set then bit SMBAUXCTL_E32B is supported and there's no benefit in reading it back. Origin of this check seems to be 14 yrs ago when people were not completely sure which chip versions support the block buffer mode.

---
v2:
- made commit message less offending ;)
- re-added parentheses to a & b && c expression

---
 drivers/i2c/busses/i2c-i801.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)
drivers/i2c/busses/i2c-i801.c +5 -12
index 05187457f..f5c1589da 100644
@@ -521,9 +521,11 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
 		return -EOPNOTSUPP;
 	}
 
+	/* Set block buffer mode */
+	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+
 	inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
 
-	/* Use 32-byte buffer to process this transaction */
 	if (read_write == I2C_SMBUS_WRITE) {
 		len = data->block[0];
 		outb_p(len, SMBHSTDAT0(priv));
@@ -750,14 +752,6 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 	return i801_check_post(priv, status);
 }
 
-static int i801_set_block_buffer_mode(struct i801_priv *priv)
-{
-	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
-	if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
-		return -EIO;
-	return 0;
-}
-
 /* Block transaction function */
 static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
 				  char read_write, int command)
@@ -791,9 +785,8 @@ static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *
 	/* Experience has shown that the block buffer can only be used for
 	   SMBus (not I2C) block transactions, even though the datasheet
 	   doesn't mention this limitation. */
-	if ((priv->features & FEATURE_BLOCK_BUFFER)
-	 && command != I2C_SMBUS_I2C_BLOCK_DATA
-	 && i801_set_block_buffer_mode(priv) == 0)
+	if ((priv->features & FEATURE_BLOCK_BUFFER) &&
+	    command != I2C_SMBUS_I2C_BLOCK_DATA)
 		result = i801_block_transaction_by_block(priv, data,
 							 read_write,
 							 command);
Signature · 1 line
2.34.0
Reviewed-by Tested-by on v2 1/1
#1 lore raw
Quoted 48 lines · Heiner Kallweit

If FEATURE_BLOCK_BUFFER is set then bit SMBAUXCTL_E32B is supported and there's no benefit in reading it back. Origin of this check seems to be 14 yrs ago when people were not completely sure which chip versions support the block buffer mode.

---
v2:
- made commit message less offending ;)
- re-added parentheses to a & b && c expression

---
 drivers/i2c/busses/i2c-i801.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)
drivers/i2c/busses/i2c-i801.c +3 -9
index 05187457f..f5c1589da 100644
@@ -521,9 +521,11 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
 		return -EOPNOTSUPP;
 	}
 
+	/* Set block buffer mode */
+	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+
 	inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
 
-	/* Use 32-byte buffer to process this transaction */
 	if (read_write == I2C_SMBUS_WRITE) {
 		len = data->block[0];
 		outb_p(len, SMBHSTDAT0(priv));
@@ -750,14 +752,6 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 	return i801_check_post(priv, status);
 }
 
-static int i801_set_block_buffer_mode(struct i801_priv *priv)
-{
-	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
-	if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
-		return -EIO;
-	return 0;
-}
-
 /* Block transaction function */
 static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
 				  char read_write, int command)
@@ -791,9 +785,8 @@ static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *
 	/* Experience has shown that the block buffer can only be used for

drivers/i2c/busses/i2c-i801.c static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data * · line 792

Quoted 10 lines
drivers/i2c/busses/i2c-i801.c +2 -3
 	   SMBus (not I2C) block transactions, even though the datasheet
 	   doesn't mention this limitation. */
-	if ((priv->features & FEATURE_BLOCK_BUFFER)
-	 && command != I2C_SMBUS_I2C_BLOCK_DATA
-	 && i801_set_block_buffer_mode(priv) == 0)
+	if ((priv->features & FEATURE_BLOCK_BUFFER) &&
+	    command != I2C_SMBUS_I2C_BLOCK_DATA)
 		result = i801_block_transaction_by_block(priv, data,
 							 read_write,
 							 command);
Signature · 2 lines
Jean Delvare
SUSE L3 Support
Applied
#2 lore raw
In reply to Heiner Kallweit
Quoted 6 lines · Heiner Kallweit

If FEATURE_BLOCK_BUFFER is set then bit SMBAUXCTL_E32B is supported and there's no benefit in reading it back. Origin of this check seems to be 14 yrs ago when people were not completely sure which chip versions support the block buffer mode.

Applied to for-next, thanks!