mmc-utils: Implement alternative boot operation
PATCH v3 1/1 mmc-utils: Implement alternative boot operation
Implements the alternative boot operation for eMMCs. Note the limitations of the help.
This is mostly useful for testing purposes if you set up the boot partition configuration correctly.
Usage:
$ sudo dd if=/dev/mmcblk2boot0 of=bootdatammcblk count=2 2+0 records in 2+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.00482308 s, 212 kB/s
$ sudo ./mmc boot_operation bootdata /dev/mmcblk2
$ diff -s bootdata bootdatammcblk Files bootdata and bootdatammcblk are identical
---
-v3: Alternative boot mode support check
-v2: Frees, closes, removal of boot_blocks parameter and boot ack check
mmc.c | 12 +++++++ mmc.h | 2 ++ mmc_cmds.c | 103 +++++++++++++++++++++++++++++++++++++++++++++++++++++ mmc_cmds.h | 1 + 4 files changed, 118 insertions(+)
mmc.c +12 -0
@@ -255,6 +255,18 @@ static struct Command commands[] = { "Issues a CMD0 GO_PRE_IDLE", NULL }, + { do_alt_boot_op,-1 , +"boot_operation" ,"<boot_data_file> <device>\n" +"Does the alternative boot operation and writes the specified starting blocks of boot data into the requested file.\n\n" +"Note some limitations\n:" +"1. The boot operation must be configured, e.g. for legacy speed:\n" +"mmc-utils bootbus set single_backward retain x8 /dev/mmcblk2\n" +"mmc-utils bootpart enable 1 0 /dev/mmcblk2\n" +"2. The MMC must currently be running at the bus mode that is configured for the boot operation (HS200 and HS400 not supported at all).\n" +"3. Only up to 512K bytes of boot data will be transferred.\n" +"4. The MMC will perform a soft reset, if your system cannot handle that do not use the boot operation from mmc-utils.\n" , +NULL + }, { 0, 0, 0, 0 } };
mmc.h +2 -0
@@ -24,6 +24,7 @@#define MMC_GO_IDLE_STATE 0/* bc */ #define MMC_GO_IDLE_STATE_ARG 0x0#define MMC_GO_PRE_IDLE_STATE_ARG 0xF0F0F0F0 +#define MMC_BOOT_INITIATION_ARG 0xFFFFFFFA#define MMC_SWITCH 6/* ac [31:0] See below R1b */ #define MMC_SEND_EXT_CSD 8/* adtc R1 */ #define MMC_SEND_STATUS 13/* ac [31:16] RCA R1 */
@@ -97,6 +98,7 @@#define EXT_CSD_CACHE_SIZE_0 249#define EXT_CSD_SEC_FEATURE_SUPPORT 231#define EXT_CSD_BOOT_INFO 228/* R/W */ +#define EXT_CSD_BOOT_MULT 226/* RO */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224#define EXT_CSD_HC_WP_GRP_SIZE 221#define EXT_CSD_SEC_COUNT_3 215
mmc_cmds.c +103 -0
106 lines not on this page · raw message
mmc_cmds.h +1 -0
@@ -49,3 +49,4 @@ int do_erase(int nargs, char **argv);int do_general_cmd_read (int nargs,char **argv);int do_softreset (int nargs,char **argv);int do_preidle (int nargs,char **argv); +int do_alt_boot_op (int nargs,char **argv);
Signature · 5 lines
2.37.3 Hyperstone GmbH | Reichenaustr. 39a | 78467 Konstanz Managing Director: Dr. Jan Peter Berns. Commercial register of local courts: Freiburg HRB381782
Ulf Hansson
AppliedQuoted 13 lines · Christian Löhle
Implements the alternative boot operation for eMMCs. Note the limitations of the help.
This is mostly useful for testing purposes if you set up the boot partition configuration correctly.
Usage:
$ sudo dd if=/dev/mmcblk2boot0 of=bootdatammcblk count=2 2+0 records in 2+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.00482308 s, 212 kB/s
Quoted 7 lines
$ sudo ./mmc boot_operation bootdata /dev/mmcblk2$ diff -s bootdata bootdatammcblk Files bootdata and bootdatammcblk are identicalSigned-off-by Christian Loehle <[email protected]>Reviewed-by Avri Altman <[email protected]>
Applied to git.kernel.org/pub/scm//utils/mmc/mmc-utils.git master, thanks!
Kind regards
Uffe
Quoted 179 lines
---
(quoted diff) +0
-2-v3: Alternative boot mode support check -v2: Frees, closes, removal of boot_blocks parameter and boot ack check mmc.c | 12 +++++++ mmc.h | 2 ++ mmc_cmds.c | 103 +++++++++++++++++++++++++++++++++++++++++++++++++++++ mmc_cmds.h | 1 + 4 files changed, 118 insertions(+)mmc.c +12
-0@@ -255,6 +255,18 @@ static struct Command commands[] = { "Issues a CMD0 GO_PRE_IDLE", NULL }, + { do_alt_boot_op,-1 , +"boot_operation" ,"<boot_data_file> <device>\n" +"Does the alternative boot operation and writes the specified starting blocks of boot data into the requested file.\n\n" +"Note some limitations\n:" +"1. The boot operation must be configured, e.g. for legacy speed:\n" +"mmc-utils bootbus set single_backward retain x8 /dev/mmcblk2\n" +"mmc-utils bootpart enable 1 0 /dev/mmcblk2\n" +"2. The MMC must currently be running at the bus mode that is configured for the boot operation (HS200 and HS400 not supported at all).\n" +"3. Only up to 512K bytes of boot data will be transferred.\n" +"4. The MMC will perform a soft reset, if your system cannot handle that do not use the boot operation from mmc-utils.\n" , +NULL + }, { 0, 0, 0, 0 } };mmc.h +2
-0@@ -24,6 +24,7 @@#define MMC_GO_IDLE_STATE 0/* bc */ #define MMC_GO_IDLE_STATE_ARG 0x0#define MMC_GO_PRE_IDLE_STATE_ARG 0xF0F0F0F0 +#define MMC_BOOT_INITIATION_ARG 0xFFFFFFFA#define MMC_SWITCH 6/* ac [31:0] See below R1b */ #define MMC_SEND_EXT_CSD 8/* adtc R1 */ #define MMC_SEND_STATUS 13/* ac [31:16] RCA R1 */ @@ -97,6 +98,7 @@#define EXT_CSD_CACHE_SIZE_0 249#define EXT_CSD_SEC_FEATURE_SUPPORT 231#define EXT_CSD_BOOT_INFO 228/* R/W */ +#define EXT_CSD_BOOT_MULT 226/* RO */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224#define EXT_CSD_HC_WP_GRP_SIZE 221#define EXT_CSD_SEC_COUNT_3 215mmc_cmds.c +103
-0@@ -3101,3 +3101,106 @@ int do_preidle(int nargs, char **argv)return 0 ; } + +int do_alt_boot_op (int nargs,char **argv) +{ +int fd, ret, boot_data_fd; +char *device, *boot_data_file; +struct mmc_ioc_multi_cmd *mioc; +__u8 ext_csd[512 ]; +__u8 *boot_buf; +unsigned int boot_blocks, ext_csd_boot_size; + +if (nargs !=3 ) { +fprintf (stderr,"Usage: mmc boot_op <boot_data_file> </path/to/mmcblkX>\n" ); +exit (1 ); + } + boot_data_file = argv[1 ]; + device = argv[2 ]; + + fd =open (device,O_RDWR ); +if (fd <0 ) { +perror ("open device" ); +exit (1 ); + } + + ret =read_extcsd (fd, ext_csd); +if (ret) { +perror ("read extcsd" ); + goto dev_fd_close; + } +if (!(ext_csd[EXT_CSD_BOOT_INFO ] &EXT_CSD_BOOT_INFO_ALT )) { + ret = -EINVAL ; +perror ("Card does not support alternative boot mode" ); + goto dev_fd_close; + } +if (ext_csd[EXT_CSD_PART_CONFIG ] &EXT_CSD_PART_CONFIG_ACC_ACK ) { + ret = -EINVAL ; +perror ("Boot Ack must not be enabled" ); + goto dev_fd_close; + } + ext_csd_boot_size = ext_csd[EXT_CSD_BOOT_MULT ] *128 *1024 ; + boot_blocks = ext_csd_boot_size /512 ; +if (ext_csd_boot_size >MMC_IOC_MAX_BYTES ) { +printf ("Boot partition size is bigger than IOCTL limit, limiting to 512K\n" ); + boot_blocks =MMC_IOC_MAX_BYTES /512 ; + } + + boot_data_fd =open (boot_data_file,O_WRONLY |O_CREAT ,0644 ); +if (boot_data_fd <0 ) { +perror ("open boot data file" ); + ret =1 ; + goto boot_data_close; + } + + boot_buf =calloc (1 ,sizeof (__u8) * boot_blocks *512 ); + mioc =calloc (1 ,sizeof (struct mmc_ioc_multi_cmd ) + +2 *sizeof (struct mmc_ioc_cmd )); +if (!mioc || !boot_buf) { +perror ("Failed to allocate memory" ); + ret = -ENOMEM ; + goto alloced_error; + } + + mioc->num_of_cmds =2 ; + mioc->cmds[0 ].opcode =MMC_GO_IDLE_STATE ; + mioc->cmds[0 ].arg =MMC_GO_PRE_IDLE_STATE_ARG ; + mioc->cmds[0 ].flags =MMC_RSP_NONE |MMC_CMD_AC ; + mioc->cmds[0 ].write_flag =0 ; + + mioc->cmds[1 ].opcode =MMC_GO_IDLE_STATE ; + mioc->cmds[1 ].arg =MMC_BOOT_INITIATION_ARG ; + mioc->cmds[1 ].flags =MMC_RSP_NONE |MMC_CMD_ADTC ; + mioc->cmds[1 ].write_flag =0 ; + mioc->cmds[1 ].blksz =512 ; + mioc->cmds[1 ].blocks = boot_blocks; +/* Access time of boot part differs wildly, spec mandates 1s */ + mioc->cmds[1 ].data_timeout_ns =2 *1000 *1000 *1000 ; +mmc_ioc_cmd_set_data (mioc->cmds[1 ], boot_buf); + + ret =ioctl (fd,MMC_IOC_MULTI_CMD , mioc); +if (ret) { +perror ("multi-cmd ioctl error\n" ); + goto alloced_error; + } + + ret =DO_IO (write, boot_data_fd, boot_buf, boot_blocks *512 ); +if (ret <0 ) { +perror ("Write error\n" ); + goto alloced_error; + } + ret =0 ; + +alloced_error: +if (mioc) +free (mioc); +if (boot_buf) +free (boot_buf); +boot_data_close: +close (boot_data_fd); +dev_fd_close: +close (fd); +if (ret) +exit (1 ); +return 0 ; +}mmc_cmds.h +1
-1@@ -49,3 +49,4 @@ int do_erase(int nargs, char **argv);int do_general_cmd_read (int nargs,char **argv);int do_softreset (int nargs,char **argv);int do_preidle (int nargs,char **argv); +int do_alt_boot_op (int nargs,char **argv); --2.37.3
Hyperstone GmbH | Reichenaustr. 39a | 78467 Konstanz Managing Director: Dr. Jan Peter Berns. Commercial register of local courts: Freiburg HRB381782