Skip to contentSkip to conversation

U-boot signed SPL dtb+pubkey discussion

DISCUSSION Pierre-Loup Gosse 1 participant 1 message Sep 17, 2024

lore
Share & tools
lore
#0 lore raw

Hi,

If SPL_SIGN_ENABLE is set to 1, the uboot-sign bbclass will sign the u-boot fit image and add the public key to SPL dtb ('uboot_fitimage_assemble' function). Before deployment, the class concat the SPL no-dtb binary with SPL dtb+pubkey to produce the SPL binary ('concat_spl_dtb_helper' function).

However, this approach may produce an unbootable SPL binary for some target since SPL no-dtb binary may not include the magic number. For my target, a STM32 MPU, the first 256 bytes are missing.

For me, a better approach is to rebuild the SPL binary with the updated SPL dtb. Here's my suggestion:

- Disable the SPL concate function:
concat_spl_dtb_helper() {
:
}

- Adds a rebuild task, get the SPL dtb+pubkey from shared deploy directory and rebuild the SPL binary:
do_rebuild_uboot_spl_with_ signed_dtb() {
deployed_spl_dtb_binary='${ DEPLOY_DIR_IMAGE}/${SPL_DTB_ IMAGE}'
cp $deployed_spl_dtb_binary ${B}/spl/${SPL_DTB_BINARY}
oe_runmake -C ${S} O=${B} spl/u-boot-spl all
}

- Task depends on kernel do_deploy (deploy the SPL dtb+pubkey) :
python () {
if ((d.getVar('UBOOT_SIGN_ENABLE' ) == '1'
or d.getVar('UBOOT_FITIMAGE_ ENABLE') == '1')
and d.getVar('PN') == d.getVar('UBOOT_PN')
and d.getVar('UBOOT_DTB_BINARY')):

d.appendVarFlag('do_rebuild_ uboot_spl_with_signed_dtb', 'depends', ' %s:do_deploy' % d.getVar('KERNEL_PN')) bb.build.addtask('do_rebuild_ uboot_spl_with_signed_dtb', 'do_deploy', 'do_uboot_assemble_fitimage', d) }

Since I do not have a global view and this suggestion may not be a general solution, I did not submit a patch.

Best regards,

Pierre-Loup