Programtically tell diff between HT and real
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
If that 2.8 GHz CPU is not 800 MHz FSB, then it's not HT-capable regardless of what the feature flags say (as far as I know, most P4 CPUs show HT support in the feature flags even if it doesn't really support it).
----- Original Message -----
From: "Richard B. Johnson" <[email protected]>
Newsgroups: fa.linux.kernel
To: "Andre Tomt" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, June 16, 2004 4:02 PM
Subject: Re: Programtically tell diff between HT and real
Quoted 5 lines · Andre Tomt
Quoted 4 lines
Quoted 2 lines · Richard B. Johnson
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
cid
Quoted 30 lines
Quoted 9 lines
Quoted 6 lines
^_______bogomips : 5570.56
I would love to know how you turn in on! This is one of those "latest-and-greatest" Intel D865PERL mother-boards and I've even flashed the BIOS with the "latest-and-greatest".
The usual way is to enable HT in BIOS, and use a SMP enabled kernel.
It's a SMP kernel. There is no 'HT enable' in the BIOS setup. In fact, there is very little that can be set and, it's even very hard to convince it that I want to boot from a SCSI and not from the first disk it finds. One has to remove the battery to discharge the CMOS so it won't ignore the 'Del' key on startup. It's a very bad BIOS or a very bad board, I don't know which.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.26 on an i686 machine (5570.56 BogoMips).
Note 96.31% of all statistics are fiction.-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/