Skip to contentSkip to conversation

Disabling IRQ #xx, because nobody cared!

DISCUSSION William Park 1 participant 1 message Jan 31, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 2 lines · William Park

I'm runing 2.6.10 SMP. I usually use APM, but I decided to try ACPI. On my machine, USB (integrated) and Audio (PCI card) shares IRQ:

...

Quoted 31 lines

After a while, I get

    irq 185: nobody cared!
     [<c01339e2>] __report_bad_irq+0x22/0x90
     [<c0133ad8>] note_interrupt+0x58/0x90
     [<c0133578>] __do_IRQ+0x128/0x130
     [<c0104eba>] do_IRQ+0x1a/0x30
     [<c010370a>] common_interrupt+0x1a/0x20
     [<c0100690>] default_idle+0x0/0x40
     [<c01006ba>] default_idle+0x2a/0x40
     [<c0100760>] cpu_idle+0x40/0x70
    handlers:
    [<e086e000>] (snd_audiopci_interrupt+0x0/0xc0 [snd_ens1371])
    Disabling IRQ #185

Then, after some more time, I get

    irq 11: nobody cared!
     [<c01339e2>] __report_bad_irq+0x22/0x90
     [<c0133ad8>] note_interrupt+0x58/0x90
     [<c0133578>] __do_IRQ+0x128/0x130
     [<c0104eba>] do_IRQ+0x1a/0x30
     [<c010370a>] common_interrupt+0x1a/0x20
     [<c0100690>] default_idle+0x0/0x40
     [<c01006ba>] default_idle+0x2a/0x40
     [<c0100760>] cpu_idle+0x40/0x70
     [<c03728c7>] start_kernel+0x147/0x170
    handlers:
    [<c0227ef0>] (usb_hcd_irq+0x0/0x60)
    [<c0227ef0>] (usb_hcd_irq+0x0/0x60)
Quoted 3 lines

At which point, USB is dead.

Do you know if 'acpi' is responsible for this?

Solved! After many kernel compile and many kernel paramters, 'acpi=noirq' or 'pci=noacpi' solved the IRQ being disabled.

I'm running Abit VP6 dual-P3 (Via Apollo 133A, VT82C694X, VT82C686B).

Signature · 2 lines
William Park <[email protected]>, Toronto, Canada
Slackware Linux -- because I can type.